path: root/doc/api/zlib.md

# Zlib

<!--introduced_in=v0.10.0-->

> Stability: 2 - Stable

The `zlib` module provides compression functionality implemented using Gzip and
Deflate/Inflate. It can be accessed using:

```js
const zlib = require('zlib');
```

Compressing or decompressing a stream (such as a file) can be accomplished by
piping the source stream data through a `zlib` stream into a destination stream:

```js
const gzip = zlib.createGzip();
const fs = require('fs');
const inp = fs.createReadStream('input.txt');
const out = fs.createWriteStream('input.txt.gz');

inp.pipe(gzip).pipe(out);
```

It is also possible to compress or decompress data in a single step:

```js
const input = '.................................';
zlib.deflate(input, (err, buffer) => {
  if (!err) {
    console.log(buffer.toString('base64'));
  } else {
    // handle error
  }
});

const buffer = Buffer.from('eJzT0yMAAGTvBe8=', 'base64');
zlib.unzip(buffer, (err, buffer) => {
  if (!err) {
    console.log(buffer.toString());
  } else {
    // handle error
  }
});
```

## Threadpool Usage

Note that all zlib APIs except those that are explicitly synchronous use libuv's
threadpool, which can have surprising and negative performance implications for
some applications, see the [`UV_THREADPOOL_SIZE`][] documentation for more
information.

## Compressing HTTP requests and responses

The `zlib` module can be used to implement support for the `gzip` and `deflate`
content-encoding mechanisms defined by
[HTTP](https://tools.ietf.org/html/rfc7230#section-4.2).

The HTTP [`Accept-Encoding`][] header is used within an http request to identify
the compression encodings accepted by the client. The [`Content-Encoding`][]
header is used to identify the compression encodings actually applied to a
message.

The examples given below are drastically simplified to show the basic concept.
Using `zlib` encoding can be expensive, and the results ought to be cached.
See [Memory Usage Tuning][] for more information on the speed/memory/compression
tradeoffs involved in `zlib` usage.

```js
// client request example
const zlib = require('zlib');
const http = require('http');
const fs = require('fs');
const request = http.get({ host: 'example.com',
                           path: '/',
                           port: 80,
                           headers: { 'Accept-Encoding': 'gzip,deflate' } });
request.on('response', (response) => {
  const output = fs.createWriteStream('example.com_index.html');

  switch (response.headers['content-encoding']) {
    // or, just use zlib.createUnzip() to handle both cases
    case 'gzip':
      response.pipe(zlib.createGunzip()).pipe(output);
      break;
    case 'deflate':
      response.pipe(zlib.createInflate()).pipe(output);
      break;
    default:
      response.pipe(output);
      break;
  }
});
```

```js
// server example
// Running a gzip operation on every request is quite expensive.
// It would be much more efficient to cache the compressed buffer.
const zlib = require('zlib');
const http = require('http');
const fs = require('fs');
http.createServer((request, response) => {
  const raw = fs.createReadStream('index.html');
  let acceptEncoding = request.headers['accept-encoding'];
  if (!acceptEncoding) {
    acceptEncoding = '';
  }

  // Note: This is not a conformant accept-encoding parser.
  // See https://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.3
  if (/\bdeflate\b/.test(acceptEncoding)) {
    response.writeHead(200, { 'Content-Encoding': 'deflate' });
    raw.pipe(zlib.createDeflate()).pipe(response);
  } else if (/\bgzip\b/.test(acceptEncoding)) {
    response.writeHead(200, { 'Content-Encoding': 'gzip' });
    raw.pipe(zlib.createGzip()).pipe(response);
  } else {
    response.writeHead(200, {});
    raw.pipe(response);
  }
}).listen(1337);
```

By default, the `zlib` methods will throw an error when decompressing
truncated data. However, if it is known that the data is incomplete, or
the desire is to inspect only the beginning of a compressed file, it is
possible to suppress the default error handling by changing the flushing
method that is used to decompress the last chunk of input data:

```js
// This is a truncated version of the buffer from the above examples
const buffer = Buffer.from('eJzT0yMA', 'base64');

zlib.unzip(
  buffer,
  { finishFlush: zlib.constants.Z_SYNC_FLUSH },
  (err, buffer) => {
    if (!err) {
      console.log(buffer.toString());
    } else {
      // handle error
    }
  });
```

This will not change the behavior in other error-throwing situations, e.g.
when the input data has an invalid format. Using this method, it will not be
possible to determine whether the input ended prematurely or lacks the
integrity checks, making it necessary to manually check that the
decompressed result is valid.

## Memory Usage Tuning

<!--type=misc-->

From `zlib/zconf.h`, modified to Node.js's usage:

The memory requirements for deflate are (in bytes):

<!-- eslint-disable semi -->
```js
(1 << (windowBits + 2)) + (1 << (memLevel + 9))
```

That is: 128K for windowBits=15  +  128K for memLevel = 8
(default values) plus a few kilobytes for small objects.

For example, to reduce the default memory requirements from 256K to 128K, the
options should be set to:

```js
const options = { windowBits: 14, memLevel: 7 };
```

This will, however, generally degrade compression.

The memory requirements for inflate are (in bytes) `1 << windowBits`.
That is, 32K for windowBits=15 (default value) plus a few kilobytes
for small objects.

This is in addition to a single internal output slab buffer of size
`chunkSize`, which defaults to 16K.

The speed of `zlib` compression is affected most dramatically by the
`level` setting.  A higher level will result in better compression, but
will take longer to complete.  A lower level will result in less
compression, but will be much faster.

In general, greater memory usage options will mean that Node.js has to make
fewer calls to `zlib` because it will be able to process more data on
each `write` operation.  So, this is another factor that affects the
speed, at the cost of memory usage.

## Flushing

Calling [`.flush()`][] on a compression stream will make `zlib` return as much
output as currently possible. This may come at the cost of degraded compression
quality, but can be useful when data needs to be available as soon as possible.

In the following example, `flush()` is used to write a compressed partial
HTTP response to the client:
```js
const zlib = require('zlib');
const http = require('http');

http.createServer((request, response) => {
  // For the sake of simplicity, the Accept-Encoding checks are omitted.
  response.writeHead(200, { 'content-encoding': 'gzip' });
  const output = zlib.createGzip();
  output.pipe(response);

  setInterval(() => {
    output.write(`The current time is ${Date()}\n`, () => {
      // The data has been passed to zlib, but the compression algorithm may
      // have decided to buffer the data for more efficient compression.
      // Calling .flush() will make the data available as soon as the client
      // is ready to receive it.
      output.flush();
    });
  }, 1000);
}).listen(1337);
```

## Constants
<!-- YAML
added: v0.5.8
-->

<!--type=misc-->

All of the constants defined in `zlib.h` are also defined on
`require('zlib').constants`. In the normal course of operations, it will not be
necessary to use these  constants. They are documented so that their presence is
not surprising. This section is taken almost directly from the
[zlib documentation][].  See <https://zlib.net/manual.html#Constants> for more
details.

Previously, the constants were available directly from `require('zlib')`, for
instance `zlib.Z_NO_FLUSH`. Accessing the constants directly from the module is
currently still possible but is deprecated.

Allowed flush values.

* `zlib.constants.Z_NO_FLUSH`
* `zlib.constants.Z_PARTIAL_FLUSH`
* `zlib.constants.Z_SYNC_FLUSH`
* `zlib.constants.Z_FULL_FLUSH`
* `zlib.constants.Z_FINISH`
* `zlib.constants.Z_BLOCK`
* `zlib.constants.Z_TREES`

Return codes for the compression/decompression functions. Negative
values are errors, positive values are used for special but normal
events.

* `zlib.constants.Z_OK`
* `zlib.constants.Z_STREAM_END`
* `zlib.constants.Z_NEED_DICT`
* `zlib.constants.Z_ERRNO`
* `zlib.constants.Z_STREAM_ERROR`
* `zlib.constants.Z_DATA_ERROR`
* `zlib.constants.Z_MEM_ERROR`
* `zlib.constants.Z_BUF_ERROR`
* `zlib.constants.Z_VERSION_ERROR`

Compression levels.

* `zlib.constants.Z_NO_COMPRESSION`
* `zlib.constants.Z_BEST_SPEED`
* `zlib.constants.Z_BEST_COMPRESSION`
* `zlib.constants.Z_DEFAULT_COMPRESSION`

Compression strategy.

* `zlib.constants.Z_FILTERED`
* `zlib.constants.Z_HUFFMAN_ONLY`
* `zlib.constants.Z_RLE`
* `zlib.constants.Z_FIXED`
* `zlib.constants.Z_DEFAULT_STRATEGY`

## Class Options
<!-- YAML
added: v0.11.1
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `dictionary` option can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `dictionary` option can be an Uint8Array now.
  - version: v5.11.0
    pr-url: https://github.com/nodejs/node/pull/6069
    description: The `finishFlush` option is supported now.
-->

<!--type=misc-->

Each class takes an `options` object.  All options are optional.

Note that some options are only relevant when compressing, and are
ignored by the decompression classes.

* `flush` {integer} **Default:** `zlib.constants.Z_NO_FLUSH`
* `finishFlush` {integer} **Default:** `zlib.constants.Z_FINISH`
* `chunkSize` {integer} **Default:** `16 * 1024`
* `windowBits` {integer}
* `level` {integer} (compression only)
* `memLevel` {integer} (compression only)
* `strategy` {integer} (compression only)
* `dictionary` {Buffer|TypedArray|DataView|ArrayBuffer} (deflate/inflate only,
  empty dictionary by default)
* `info` {boolean} (If `true`, returns an object with `buffer` and `engine`)

See the description of `deflateInit2` and `inflateInit2` at
<https://zlib.net/manual.html#Advanced> for more information on these.

## Class: zlib.Deflate
<!-- YAML
added: v0.5.8
-->

Compress data using deflate.

## Class: zlib.DeflateRaw
<!-- YAML
added: v0.5.8
-->

Compress data using deflate, and do not append a `zlib` header.

## Class: zlib.Gunzip
<!-- YAML
added: v0.5.8
changes:
  - version: v6.0.0
    pr-url: https://github.com/nodejs/node/pull/5883
    description: Trailing garbage at the end of the input stream will now
                 result in an `error` event.
  - version: v5.9.0
    pr-url: https://github.com/nodejs/node/pull/5120
    description: Multiple concatenated gzip file members are supported now.
  - version: v5.0.0
    pr-url: https://github.com/nodejs/node/pull/2595
    description: A truncated input stream will now result in an `error` event.
-->

Decompress a gzip stream.

## Class: zlib.Gzip
<!-- YAML
added: v0.5.8
-->

Compress data using gzip.

## Class: zlib.Inflate
<!-- YAML
added: v0.5.8
changes:
  - version: v5.0.0
    pr-url: https://github.com/nodejs/node/pull/2595
    description: A truncated input stream will now result in an `error` event.
-->

Decompress a deflate stream.

## Class: zlib.InflateRaw
<!-- YAML
added: v0.5.8
changes:
  - version: v6.8.0
    pr-url: https://github.com/nodejs/node/pull/8512
    description: Custom dictionaries are now supported by `InflateRaw`.
  - version: v5.0.0
    pr-url: https://github.com/nodejs/node/pull/2595
    description: A truncated input stream will now result in an `error` event.
-->

Decompress a raw deflate stream.

## Class: zlib.Unzip
<!-- YAML
added: v0.5.8
-->

Decompress either a Gzip- or Deflate-compressed stream by auto-detecting
the header.

## Class: zlib.Zlib
<!-- YAML
added: v0.5.8
-->

Not exported by the `zlib` module. It is documented here because it is the base
class of the compressor/decompressor classes.

### zlib.bytesRead
<!-- YAML
added: v8.1.0
-->

* {number}

The `zlib.bytesRead` property specifies the number of bytes read by the engine
before the bytes are processed (compressed or decompressed, as appropriate for
the derived class).

### zlib.close([callback])
<!-- YAML
added: v0.9.4
-->

Close the underlying handle.

### zlib.flush([kind], callback)
<!-- YAML
added: v0.5.8
-->

* `kind` **Default:** `zlib.constants.Z_FULL_FLUSH`

Flush pending data. Don't call this frivolously, premature flushes negatively
impact the effectiveness of the compression algorithm.

Calling this only flushes data from the internal `zlib` state, and does not
perform flushing of any kind on the streams level. Rather, it behaves like a
normal call to `.write()`, i.e. it will be queued up behind other pending
writes and will only produce output when data is being read from the stream.

### zlib.params(level, strategy, callback)
<!-- YAML
added: v0.11.4
-->

Dynamically update the compression level and compression strategy.
Only applicable to deflate algorithm.

### zlib.reset()
<!-- YAML
added: v0.7.0
-->

Reset the compressor/decompressor to factory defaults. Only applicable to
the inflate and deflate algorithms.

## zlib.constants
<!-- YAML
added: v7.0.0
-->

Provides an object enumerating Zlib-related constants.

## zlib.createDeflate([options])
<!-- YAML
added: v0.5.8
-->

Creates and returns a new [Deflate][] object with the given [options][].

## zlib.createDeflateRaw([options])
<!-- YAML
added: v0.5.8
-->

Creates and returns a new [DeflateRaw][] object with the given [options][].

An upgrade of zlib from 1.2.8 to 1.2.11 changed behavior when windowBits
is set to 8 for raw deflate streams. zlib would automatically set windowBits
to 9 if was initially set to 8. Newer versions of zlib will throw an exception,
so Node.js restored the original behavior of upgrading a value of 8 to 9,
since passing `windowBits = 9` to zlib actually results in a compressed stream
that effectively uses an 8-bit window only.

## zlib.createGunzip([options])
<!-- YAML
added: v0.5.8
-->

Creates and returns a new [Gunzip][] object with the given [options][].

## zlib.createGzip([options])
<!-- YAML
added: v0.5.8
-->

Creates and returns a new [Gzip][] object with the given [options][].

## zlib.createInflate([options])
<!-- YAML
added: v0.5.8
-->

Creates and returns a new [Inflate][] object with the given [options][].

## zlib.createInflateRaw([options])
<!-- YAML
added: v0.5.8
-->

Creates and returns a new [InflateRaw][] object with the given [options][].

## zlib.createUnzip([options])
<!-- YAML
added: v0.5.8
-->

Creates and returns a new [Unzip][] object with the given [options][].

## Convenience Methods

<!--type=misc-->

All of these take a [`Buffer`][], [`TypedArray`][], [`DataView`][],
[`ArrayBuffer`][] or string as the first argument, an optional second argument
to supply options to the `zlib` classes and will call the supplied callback
with `callback(error, result)`.

Every method has a `*Sync` counterpart, which accept the same arguments, but
without a callback.

### zlib.deflate(buffer[, options], callback)
<!-- YAML
added: v0.6.0
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `buffer` parameter can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->
### zlib.deflateSync(buffer[, options])
<!-- YAML
added: v0.11.12
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `buffer` parameter can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->

- `buffer` {Buffer|TypedArray|DataView|ArrayBuffer|string}

Compress a chunk of data with [Deflate][].

### zlib.deflateRaw(buffer[, options], callback)
<!-- YAML
added: v0.6.0
changes:
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->
### zlib.deflateRawSync(buffer[, options])
<!-- YAML
added: v0.11.12
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `buffer` parameter can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->

- `buffer` {Buffer|TypedArray|DataView|ArrayBuffer|string}

Compress a chunk of data with [DeflateRaw][].

### zlib.gunzip(buffer[, options], callback)
<!-- YAML
added: v0.6.0
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `buffer` parameter can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->
### zlib.gunzipSync(buffer[, options])
<!-- YAML
added: v0.11.12
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `buffer` parameter can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->

- `buffer` {Buffer|TypedArray|DataView|ArrayBuffer|string}

Decompress a chunk of data with [Gunzip][].

### zlib.gzip(buffer[, options], callback)
<!-- YAML
added: v0.6.0
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `buffer` parameter can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->
### zlib.gzipSync(buffer[, options])
<!-- YAML
added: v0.11.12
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `buffer` parameter can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->

- `buffer` {Buffer|TypedArray|DataView|ArrayBuffer|string}

Compress a chunk of data with [Gzip][].

### zlib.inflate(buffer[, options], callback)
<!-- YAML
added: v0.6.0
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `buffer` parameter can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->
### zlib.inflateSync(buffer[, options])
<!-- YAML
added: v0.11.12
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `buffer` parameter can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->

- `buffer` {Buffer|TypedArray|DataView|ArrayBuffer|string}

Decompress a chunk of data with [Inflate][].

### zlib.inflateRaw(buffer[, options], callback)
<!-- YAML
added: v0.6.0
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `buffer` parameter can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->
### zlib.inflateRawSync(buffer[, options])
<!-- YAML
added: v0.11.12
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `buffer` parameter can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->

- `buffer` {Buffer|TypedArray|DataView|ArrayBuffer|string}

Decompress a chunk of data with [InflateRaw][].

### zlib.unzip(buffer[, options], callback)
<!-- YAML
added: v0.6.0
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `buffer` parameter can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->
### zlib.unzipSync(buffer[, options])
<!-- YAML
added: v0.11.12
changes:
  - version: v9.4.0
    pr-url: https://github.com/nodejs/node/pull/16042
    description: The `buffer` parameter can be an ArrayBuffer.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12223
    description: The `buffer` parameter can be any TypedArray or DataView now.
  - version: v8.0.0
    pr-url: https://github.com/nodejs/node/pull/12001
    description: The `buffer` parameter can be an Uint8Array now.
-->

- `buffer` {Buffer|TypedArray|DataView|ArrayBuffer|string}

Decompress a chunk of data with [Unzip][].

[`.flush()`]: #zlib_zlib_flush_kind_callback
[`Accept-Encoding`]: https://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.3
[`ArrayBuffer`]: https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/ArrayBuffer
[`Buffer`]: buffer.html#buffer_class_buffer
[`Content-Encoding`]: https://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.11
[`DataView`]: https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/DataView
[`TypedArray`]: https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/TypedArray
[DeflateRaw]: #zlib_class_zlib_deflateraw
[Deflate]: #zlib_class_zlib_deflate
[Gunzip]: #zlib_class_zlib_gunzip
[Gzip]: #zlib_class_zlib_gzip
[InflateRaw]: #zlib_class_zlib_inflateraw
[Inflate]: #zlib_class_zlib_inflate
[Memory Usage Tuning]: #zlib_memory_usage_tuning
[Unzip]: #zlib_class_zlib_unzip
[`UV_THREADPOOL_SIZE`]: cli.html#cli_uv_threadpool_size_size
[options]: #zlib_class_options
[zlib documentation]: https://zlib.net/manual.html#Constants