Age | Commit message (Collapse) | Author |
|
256 color would be return instead of 16m if both env variables were set
* tty: improve color check order highest spec first
* tty: add test for TERM and COLORTERM set
* tty: move COLORTERM check outside TERM closure
* tty: remove extra if check for COLORTERM
Refs: https://github.com/nodejs/node/issues/27609
PR-URL: https://github.com/nodejs/node/pull/30474
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
|
|
PR-URL: https://github.com/nodejs/node/pull/30534
Fixes: https://github.com/nodejs/node/issues/30505
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
|
|
* use new maxSessionInvalidFrames to lower the needed frames
* slow down requests to generate less redundant after-session-close
requests
PR-URL: https://github.com/nodejs/node/pull/30534
Fixes: https://github.com/nodejs/node/issues/30505
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
|
|
PR-URL: https://github.com/nodejs/node/pull/30534
Fixes: https://github.com/nodejs/node/issues/30505
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
|
|
RFC 2898 does not permit an iteration count of zero, and OpenSSL 1.1.1
will treat it as one iteration internally.
Future OpenSSL versions will reject such inputs (already on master
branch), but until that happens, Node.js should manually reject them.
Refs: https://github.com/nodejs/webcrypto/pull/29
PR-URL: https://github.com/nodejs/node/pull/30578
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
|
|
This commit adds a retryDelay option to rimraf which configures
the amount of time between retry operations.
Refs: https://github.com/nodejs/node/issues/30580
PR-URL: https://github.com/nodejs/node/pull/30644
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
|
|
This commit removes the emfileWait option. EMFILE errors are
now handled the same as any other retriable error.
Refs: https://github.com/nodejs/node/issues/30580
PR-URL: https://github.com/nodejs/node/pull/30644
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
|
|
This commit makes retries an opt-in feature by defaulting
to no automatic retries. This will be particularly important
once synchronous operations can sleep between attempts.
Refs: https://github.com/nodejs/node/issues/30580
PR-URL: https://github.com/nodejs/node/pull/30644
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
|
|
This is part of reworking the rimraf retry logic.
Refs: https://github.com/nodejs/node/issues/30580
PR-URL: https://github.com/nodejs/node/pull/30644
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
|
|
Until https://github.com/nodejs/node/issues/30498 is resolved, skip
test-domain-error-types on debug builds.
PR-URL: https://github.com/nodejs/node/pull/30629
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
|
|
Refs: https://github.com/nodejs/node/issues/26401#issuecomment-557899953
PR-URL: https://github.com/nodejs/node/pull/30628
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
|
|
PR-URL: https://github.com/nodejs/node/pull/30593
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Guy Bedford <guybedford@gmail.com>
|
|
Covering the case when init Dir class without passing
handle paramd to constructor.
PR-URL: https://github.com/nodejs/node/pull/30313
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
|
|
change object assign by spread operator in test-require-symlink.js
PR-URL: https://github.com/nodejs/node/pull/30438
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
|
|
The message argument of two test functions in
test-inspector-async-call-stack is useful but unused. Use it!
PR-URL: https://github.com/nodejs/node/pull/30618
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
|
|
The minimum ICU version for Node.js must be at least the minimum ICU
version for V8.
PR-URL: https://github.com/nodejs/node/pull/30608
Refs: https://github.com/nodejs/node/pull/30607
Reviewed-By: Steven R Loomis <srloomis@us.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
|
|
PR-URL: https://github.com/nodejs/node/pull/30436
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
|
|
change object assign to spread object in test-npm-install.js
PR-URL: https://github.com/nodejs/node/pull/30422
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
|
|
PR-URL: https://github.com/nodejs/node/pull/30419
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
|
|
PR-URL: https://github.com/nodejs/node/pull/30413
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
|
|
PR-URL: https://github.com/nodejs/node/pull/30412
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
|
|
change var to let in test-tick-processor-unknown.js
PR-URL: https://github.com/nodejs/node/pull/30408
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
|
|
PR-URL: https://github.com/nodejs/node/pull/30406
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
|
|
cover prepare_stack_trace in case when trace is empty
PR-URL: https://github.com/nodejs/node/pull/30311
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
|
|
PR-URL: https://github.com/nodejs/node/pull/30309
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
|
|
PR-URL: https://github.com/nodejs/node/pull/30307
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
|
|
Refs: https://github.com/nodejs/node/pull/30561/files#r348667256
PR-URL: https://github.com/nodejs/node/pull/30561
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
|
|
Refs: https://github.com/nodejs/node/pull/30561#pullrequestreview-320172639
PR-URL: https://github.com/nodejs/node/pull/30561
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
|
|
I don't believe there's a reason test-stream-writable-clear-buffer needs
to be in sequential. Move it to parallel.
PR-URL: https://github.com/nodejs/node/pull/30561
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
|
|
This reveals the values that cause the assertion error, should it
happen.
PR-URL: https://github.com/nodejs/node/pull/30561
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
|
|
PR-URL: https://github.com/nodejs/node/pull/30561
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
|
|
Replace setTimeout() with setImmediate() in
test-stream-writable-clear-buffer. The test still fails in Node.js 8.6.0
(if you comment out the `common` module, since it uses BigInts and those
aren't supported in 8.6.0).
PR-URL: https://github.com/nodejs/node/pull/30561
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
|
|
Convert functions to arrow functions. Remove unused param('signal') from
function.
PR-URL: https://github.com/nodejs/node/pull/30536
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
|
|
test-dgram-send-cb-quelches-error works with or without a network. Move
to `parallel` directory.
PR-URL: https://github.com/nodejs/node/pull/30545
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
|
|
RFC 2606 reserves ithe .invalid top-level-domain for use in "domain
names that are sure to be invalid and which it is obvious at a glance
are invalid." Replace `dne.example.com` which actually isn't guaranteed
to not exist. (example.com is for examples, but at least one address
does in fact exist in that TLD.)
PR-URL: https://github.com/nodejs/node/pull/30545
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
|
|
When an error occurs unexpectedly, let the user know what the error is.
PR-URL: https://github.com/nodejs/node/pull/30545
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
|
|
cover 'close' method (in Dir class) with tests
Add 2 tests for full covering of method 'close' in class Dir
1. If pass smth that not string as a callback - throw an exception
2. If do .close() on already closed directory - throw an exception
PR-URL: https://github.com/nodejs/node/pull/30310
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
|
|
PR-URL: https://github.com/nodejs/node/pull/30541
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
|
|
* remove shared state of request counting from each listener by using
callbacks to report test finish. This also fixes slight race condition
where one of the request could finish before the other was taken into
account resulting in ECONNREFUSED due to premature server.close()
* slightly move code for better cohesion
* fix error comment in testHttp10 'Trailer ...' -> 'No trailer ...'
PR-URL: https://github.com/nodejs/node/pull/30522
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
|
|
Adds a new abstract class for module authors and embedders to register
arbitrary isolates with `node::MultiIsolatePlatform`.
PR-URL: https://github.com/nodejs/node/pull/30324
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
|
|
PR-URL: https://github.com/nodejs/node/pull/29292
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
|
|
Debugging HTTPS or TLS connections from a Node.js app with (for example)
Wireshark is unreasonably difficult without the ability to get the TLS
key log. In theory, the application can be modified to use the
`'keylog'` event directly, but for complex apps, or apps that define
there own HTTPS Agent (like npm), this is unreasonably difficult.
Use of the option triggers a warning to be emitted so the user is
clearly notified of what is happening and its effect.
PR-URL: https://github.com/nodejs/node/pull/30055
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
|
|
The keylog event is implemented on TLS sockets, but client HTTPS uses
TLS sockets managed by an agent, so accessing the underlying socket
before the TLS handshake completed was not possible. Note that server
HTTPS already supports the keylog event because it inherits from the TLS
server.
PR-URL: https://github.com/nodejs/node/pull/30053
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
|
|
Ensure that the callback passed into end() is always invoke in
order to avoid bug such as deadlock the user.
PR-URL: https://github.com/nodejs/node/pull/29747
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
|
|
An instance of FSStatWatcher is returned when a user calls fs.watchFile,
which will call the start method. A user can't create an instance
of a FSStatWatcher directly. If the start method is called by a user
it is a noop since the watcher has already started.
This "Class" is currently undocumented.
PR-URL: https://github.com/nodejs/node/pull/29971
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
|
|
PR-URL: https://github.com/nodejs/node/pull/30125
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
|
|
More precisely, make them untransferable if they were created through
*our* APIs, because those do not follow the improved free callback
mechanism that V8 uses now. All other ArrayBuffers can be transferred
between threads now, the assumption being that they were created in a
clean way that follows the V8 API on this.
This addresses a TODO comment.
Refs: https://github.com/nodejs/node/pull/30339#issuecomment-552225353
PR-URL: https://github.com/nodejs/node/pull/30475
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
|
|
Referring to `BaseObject` instances using standard C++ smart pointers
can interfere with BaseObject’s own cleanup mechanisms
(explicit delete, delete-on-GC and delete-on-cleanup).
Introducing custom smart pointers allows referring to `BaseObject`s
safely while keeping those mechanisms intact.
Refs: https://github.com/nodejs/quic/pull/141
Refs: https://github.com/nodejs/quic/pull/149
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/30374
Refs: https://github.com/nodejs/quic/pull/165
Reviewed-By: David Carlier <devnexen@gmail.com>
|
|
Previously `internal/bootstrap/pre_execution.js` requires
`internal/modules/cjs/loader.js` which in turn requires
`internal/bootstrap/pre_execution.js`. This patch moves the
entry point execution logic out of `pre_execution.js` and
puts it into `internal/modules/run_main.js`. It also tests
that `Module.runMain` can be monkey-patched before further
deprecation/refactoring can be done.
Also added an internal assertion `hasLoadedAnyUserCJSModule`
for documentation purposes.
PR-URL: https://github.com/nodejs/node/pull/30349
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
|
|
C1 control characters will from now on also be escaped to prevent
altering the terminal behavior.
Fixes: https://github.com/nodejs/node/issues/29450
PR-URL: https://github.com/nodejs/node/pull/29826
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
|