1 files changed, 252 insertions, 0 deletions
diff --git a/deps/openssl/openssl/doc/man3/OPENSSL_init_crypto.pod b/deps/openssl/openssl/doc/man3/OPENSSL_init_crypto.pod
new file mode 100644
index 0000000000..a259539f05
--- /dev/null
+++ b/deps/openssl/openssl/doc/man3/OPENSSL_init_crypto.pod
@@ -0,0 +1,252 @@
+=pod
+
+=head1 NAME
+
+OPENSSL_INIT_new, OPENSSL_INIT_set_config_appname, OPENSSL_INIT_free,
+OPENSSL_init_crypto, OPENSSL_cleanup,
+OPENSSL_atexit, OPENSSL_thread_stop - OpenSSL
+initialisation and deinitialisation functions
+
+=head1 SYNOPSIS
+
+ #include <openssl/crypto.h>
+
+ void OPENSSL_cleanup(void);
+ int OPENSSL_init_crypto(uint64_t opts, const OPENSSL_INIT_SETTINGS *settings);
+ int OPENSSL_atexit(void (*handler)(void));
+ void OPENSSL_thread_stop(void);
+
+ OPENSSL_INIT_SETTINGS *OPENSSL_INIT_new(void);
+ int OPENSSL_INIT_set_config_appname(OPENSSL_INIT_SETTINGS *init,
+                                     const char* name);
+ void OPENSSL_INIT_free(OPENSSL_INIT_SETTINGS *init);
+
+=head1 DESCRIPTION
+
+During normal operation OpenSSL (libcrypto) will allocate various resources at
+start up that must, subsequently, be freed on close down of the library.
+Additionally some resources are allocated on a per thread basis (if the
+application is multi-threaded), and these resources must be freed prior to the
+thread closing.
+
+As of version 1.1.0 OpenSSL will automatically allocate all resources that it
+needs so no explicit initialisation is required. Similarly it will also
+automatically deinitialise as required.
+
+However, there way be situations when explicit initialisation is desirable or
+needed, for example when some non-default initialisation is required. The
+function OPENSSL_init_crypto() can be used for this purpose for
+libcrypto (see also L<OPENSSL_init_ssl(3)> for the libssl
+equivalent).
+
+Numerous internal OpenSSL functions call OPENSSL_init_crypto().
+Therefore, in order to perform non-default initialisation,
+OPENSSL_init_crypto() MUST be called by application code prior to
+any other OpenSSL function calls.
+
+The B<opts> parameter specifies which aspects of libcrypto should be
+initialised. Valid options are:
+
+=over 4
+
+=item OPENSSL_INIT_NO_LOAD_CRYPTO_STRINGS
+
+Suppress automatic loading of the libcrypto error strings. This option is
+not a default option. Once selected subsequent calls to
+OPENSSL_init_crypto() with the option
+B<OPENSSL_INIT_LOAD_CRYPTO_STRINGS> will be ignored.
+
+=item OPENSSL_INIT_LOAD_CRYPTO_STRINGS
+
+Automatic loading of the libcrypto error strings. With this option the
+library will automatically load the libcrypto error strings.
+This option is a default option. Once selected subsequent calls to
+OPENSSL_init_crypto() with the option
+B<OPENSSL_INIT_NO_LOAD_CRYPTO_STRINGS> will be ignored.
+
+=item OPENSSL_INIT_ADD_ALL_CIPHERS
+
+With this option the library will automatically load and make available all
+libcrypto ciphers. This option is a default option. Once selected subsequent
+calls to OPENSSL_init_crypto() with the option
+B<OPENSSL_INIT_NO_ADD_ALL_CIPHERS> will be ignored.
+
+=item OPENSSL_INIT_ADD_ALL_DIGESTS
+
+With this option the library will automatically load and make available all
+libcrypto digests. This option is a default option. Once selected subsequent
+calls to OPENSSL_init_crypto() with the option
+B<OPENSSL_INIT_NO_ADD_ALL_CIPHERS> will be ignored.
+
+=item OPENSSL_INIT_NO_ADD_ALL_CIPHERS
+
+With this option the library will suppress automatic loading of libcrypto
+ciphers. This option is not a default option. Once selected subsequent
+calls to OPENSSL_init_crypto() with the option
+B<OPENSSL_INIT_ADD_ALL_CIPHERS> will be ignored.
+
+=item OPENSSL_INIT_NO_ADD_ALL_DIGESTS
+
+With this option the library will suppress automatic loading of libcrypto
+digests. This option is not a default option. Once selected subsequent
+calls to OPENSSL_init_crypto() with the option
+B<OPENSSL_INIT_ADD_ALL_DIGESTS> will be ignored.
+
+=item OPENSSL_INIT_LOAD_CONFIG
+
+With this option an OpenSSL configuration file will be automatically loaded and
+used by calling OPENSSL_config(). This is not a default option for libcrypto.
+From OpenSSL 1.1.1 this is a default option for libssl (see
+L<OPENSSL_init_ssl(3)> for further details about libssl initialisation). See the
+description of OPENSSL_INIT_new(), below.
+
+=item OPENSSL_INIT_NO_LOAD_CONFIG
+
+With this option the loading of OpenSSL configuration files will be suppressed.
+It is the equivalent of calling OPENSSL_no_config(). This is not a default
+option.
+
+=item OPENSSL_INIT_ASYNC
+
+With this option the library with automatically initialise the libcrypto async
+sub-library (see L<ASYNC_start_job(3)>). This is a default option.
+
+=item OPENSSL_INIT_ENGINE_RDRAND
+
+With this option the library will automatically load and initialise the
+RDRAND engine (if available). This not a default option.
+
+=item OPENSSL_INIT_ENGINE_DYNAMIC
+
+With this option the library will automatically load and initialise the
+dynamic engine. This not a default option.
+
+=item OPENSSL_INIT_ENGINE_OPENSSL
+
+With this option the library will automatically load and initialise the
+openssl engine. This not a default option.
+
+=item OPENSSL_INIT_ENGINE_CRYPTODEV
+
+With this option the library will automatically load and initialise the
+cryptodev engine (if available). This not a default option.
+
+=item OPENSSL_INIT_ENGINE_CAPI
+
+With this option the library will automatically load and initialise the
+CAPI engine (if available). This not a default option.
+
+=item OPENSSL_INIT_ENGINE_PADLOCK
+
+With this option the library will automatically load and initialise the
+padlock engine (if available). This not a default option.
+
+=item OPENSSL_INIT_ENGINE_AFALG
+
+With this option the library will automatically load and initialise the
+AFALG engine. This not a default option.
+
+=item OPENSSL_INIT_ENGINE_ALL_BUILTIN
+
+With this option the library will automatically load and initialise all the
+built in engines listed above with the exception of the openssl and afalg
+engines. This not a default option.
+
+=item OPENSSL_INIT_ATFORK
+
+With this option the library will register its fork handlers.
+See OPENSSL_fork_prepare(3) for details.
+
+=back
+
+Multiple options may be combined together in a single call to
+OPENSSL_init_crypto(). For example:
+
+ OPENSSL_init_crypto(OPENSSL_INIT_NO_ADD_ALL_CIPHERS
+                     | OPENSSL_INIT_NO_ADD_ALL_DIGESTS, NULL);
+
+The OPENSSL_cleanup() function deinitialises OpenSSL (both libcrypto
+and libssl). All resources allocated by OpenSSL are freed. Typically there
+should be no need to call this function directly as it is initiated
+automatically on application exit. This is done via the standard C library
+atexit() function. In the event that the application will close in a manner
+that will not call the registered atexit() handlers then the application should
+call OPENSSL_cleanup() directly. Developers of libraries using OpenSSL
+are discouraged from calling this function and should instead, typically, rely
+on auto-deinitialisation. This is to avoid error conditions where both an
+application and a library it depends on both use OpenSSL, and the library
+deinitialises it before the application has finished using it.
+
+Once OPENSSL_cleanup() has been called the library cannot be reinitialised.
+Attempts to call OPENSSL_init_crypto() will fail and an ERR_R_INIT_FAIL error
+will be added to the error stack. Note that because initialisation has failed
+OpenSSL error strings will not be available, only an error code. This code can
+be put through the openssl errstr command line application to produce a human
+readable error (see L<errstr(1)>).
+
+The OPENSSL_atexit() function enables the registration of a
+function to be called during OPENSSL_cleanup(). Stop handlers are
+called after deinitialisation of resources local to a thread, but before other
+process wide resources are freed. In the event that multiple stop handlers are
+registered, no guarantees are made about the order of execution.
+
+The OPENSSL_thread_stop() function deallocates resources associated
+with the current thread. Typically this function will be called automatically by
+the library when the thread exits. This should only be called directly if
+resources should be freed at an earlier time, or under the circumstances
+described in the NOTES section below.
+
+The B<OPENSSL_INIT_LOAD_CONFIG> flag will load a default configuration
+file. For optional configuration file settings, an B<OPENSSL_INIT_SETTINGS>
+must be created and used.
+The routines OPENSSL_init_new() and OPENSSL_INIT_set_config_appname() can
+be used to allocate the object and set the application name, and then the
+object can be released with OPENSSL_INIT_free() when done.
+
+=head1 NOTES
+
+Resources local to a thread are deallocated automatically when the thread exits
+(e.g. in a pthreads environment, when pthread_exit() is called). On Windows
+platforms this is done in response to a DLL_THREAD_DETACH message being sent to
+the libcrypto32.dll entry point. Some windows functions may cause threads to exit
+without sending this message (for example ExitProcess()). If the application
+uses such functions, then the application must free up OpenSSL resources
+directly via a call to OPENSSL_thread_stop() on each thread. Similarly this
+message will also not be sent if OpenSSL is linked statically, and therefore
+applications using static linking should also call OPENSSL_thread_stop() on each
+thread. Additionally if OpenSSL is loaded dynamically via LoadLibrary() and the
+threads are not destroyed until after FreeLibrary() is called then each thread
+should call OPENSSL_thread_stop() prior to the FreeLibrary() call.
+
+On Linux/Unix where OpenSSL has been loaded via dlopen() and the application is
+multi-threaded and if dlclose() is subsequently called prior to the threads
+being destroyed then OpenSSL will not be able to deallocate resources associated
+with those threads. The application should either call OPENSSL_thread_stop() on
+each thread prior to the dlclose() call, or alternatively the original dlopen()
+call should use the RTLD_NODELETE flag (where available on the platform).
+
+=head1 RETURN VALUES
+
+The functions OPENSSL_init_crypto, OPENSSL_atexit() and
+OPENSSL_INIT_set_config_appname() return 1 on success or 0 on error.
+
+=head1 SEE ALSO
+
+L<OPENSSL_init_ssl(3)>
+
+=head1 HISTORY
+
+The OPENSSL_init_crypto(), OPENSSL_cleanup(), OPENSSL_atexit(),
+OPENSSL_thread_stop(), OPENSSL_INIT_new(), OPENSSL_INIT_set_config_appname()
+and OPENSSL_INIT_free() functions were added in OpenSSL 1.1.0.
+
+=head1 COPYRIGHT
+
+Copyright 2016-2018 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License").  You may not use
+this file except in compliance with the License.  You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut