diff options
Diffstat (limited to 'deps/openssl/openssl/PROBLEMS')
| -rw-r--r-- | deps/openssl/openssl/PROBLEMS | 213 |
1 files changed, 0 insertions, 213 deletions
diff --git a/deps/openssl/openssl/PROBLEMS b/deps/openssl/openssl/PROBLEMS deleted file mode 100644 index 3eaab01f2c..0000000000 --- a/deps/openssl/openssl/PROBLEMS +++ /dev/null @@ -1,213 +0,0 @@ -* System libcrypto.dylib and libssl.dylib are used by system ld on MacOS X. - - - NOTE: The problem described here only applies when OpenSSL isn't built - with shared library support (i.e. without the "shared" configuration - option). If you build with shared library support, you will have no - problems as long as you set up DYLD_LIBRARY_PATH properly at all times. - - -This is really a misfeature in ld, which seems to look for .dylib libraries -along the whole library path before it bothers looking for .a libraries. This -means that -L switches won't matter unless OpenSSL is built with shared -library support. - -The workaround may be to change the following lines in apps/Makefile and -test/Makefile: - - LIBCRYPTO=-L.. -lcrypto - LIBSSL=-L.. -lssl - -to: - - LIBCRYPTO=../libcrypto.a - LIBSSL=../libssl.a - -It's possible that something similar is needed for shared library support -as well. That hasn't been well tested yet. - - -Another solution that many seem to recommend is to move the libraries -/usr/lib/libcrypto.0.9.dylib, /usr/lib/libssl.0.9.dylib to a different -directory, build and install OpenSSL and anything that depends on your -build, then move libcrypto.0.9.dylib and libssl.0.9.dylib back to their -original places. Note that the version numbers on those two libraries -may differ on your machine. - - -As long as Apple doesn't fix the problem with ld, this problem building -OpenSSL will remain as is. Well, the problem was addressed in 0.9.8f by -passing -Wl,-search_paths_first, but it's unknown if the flag was -supported from the initial MacOS X release. - - -* Parallell make leads to errors - -While running tests, running a parallell make is a bad idea. Many test -scripts use the same name for output and input files, which means different -will interfere with each other and lead to test failure. - -The solution is simple for now: don't run parallell make when testing. - - -* Bugs in gcc triggered - -- According to a problem report, there are bugs in gcc 3.0 that are - triggered by some of the code in OpenSSL, more specifically in - PEM_get_EVP_CIPHER_INFO(). The triggering code is the following: - - header+=11; - if (*header != '4') return(0); header++; - if (*header != ',') return(0); header++; - - What happens is that gcc might optimize a little too agressively, and - you end up with an extra incrementation when *header != '4'. - - We recommend that you upgrade gcc to as high a 3.x version as you can. - -- According to multiple problem reports, some of our message digest - implementations trigger bug[s] in code optimizer in gcc 3.3 for sparc64 - and gcc 2.96 for ppc. Former fails to complete RIPEMD160 test, while - latter - SHA one. - - The recomendation is to upgrade your compiler. This naturally applies to - other similar cases. - -- There is a subtle Solaris x86-specific gcc run-time environment bug, which - "falls between" OpenSSL [0.9.8 and later], Solaris ld and GCC. The bug - manifests itself as Segmentation Fault upon early application start-up. - The problem can be worked around by patching the environment according to - http://www.openssl.org/~appro/values.c. - -* solaris64-sparcv9-cc SHA-1 performance with WorkShop 6 compiler. - -As subject suggests SHA-1 might perform poorly (4 times slower) -if compiled with WorkShop 6 compiler and -xarch=v9. The cause for -this seems to be the fact that compiler emits multiplication to -perform shift operations:-( To work the problem around configure -with './Configure solaris64-sparcv9-cc -DMD32_REG_T=int'. - -* Problems with hp-parisc2-cc target when used with "no-asm" flag - -When using the hp-parisc2-cc target, wrong bignum code is generated. -This is due to the SIXTY_FOUR_BIT build being compiled with the +O3 -aggressive optimization. -The problem manifests itself by the BN_kronecker test hanging in an -endless loop. Reason: the BN_kronecker test calls BN_generate_prime() -which itself hangs. The reason could be tracked down to the bn_mul_comba8() -function in bn_asm.c. At some occasions the higher 32bit value of r[7] -is off by 1 (meaning: calculated=shouldbe+1). Further analysis failed, -as no debugger support possible at +O3 and additional fprintf()'s -introduced fixed the bug, therefore it is most likely a bug in the -optimizer. -The bug was found in the BN_kronecker test but may also lead to -failures in other parts of the code. -(See Ticket #426.) - -Workaround: modify the target to +O2 when building with no-asm. - -* Problems building shared libraries on SCO OpenServer Release 5.0.6 - with gcc 2.95.3 - -The symptoms appear when running the test suite, more specifically -test/ectest, with the following result: - -OSSL_LIBPATH="`cd ..; pwd`"; LD_LIBRARY_PATH="$OSSL_LIBPATH:$LD_LIBRARY_PATH"; DYLD_LIBRARY_PATH="$OSSL_LIBPATH:$DYLD_LIBRARY_PATH"; SHLIB_PATH="$OSSL_LIBPATH:$SHLIB_PATH"; LIBPATH="$OSSL_LIBPATH:$LIBPATH"; if [ "debug-sco5-gcc" = "Cygwin" ]; then PATH="${LIBPATH}:$PATH"; fi; export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; ./ectest -ectest.c:186: ABORT - -The cause of the problem seems to be that isxdigit(), called from -BN_hex2bn(), returns 0 on a perfectly legitimate hex digit. Further -investigation shows that any of the isxxx() macros return 0 on any -input. A direct look in the information array that the isxxx() use, -called __ctype, shows that it contains all zeroes... - -Taking a look at the newly created libcrypto.so with nm, one can see -that the variable __ctype is defined in libcrypto's .bss (which -explains why it is filled with zeroes): - -$ nm -Pg libcrypto.so | grep __ctype -__ctype B 0011659c -__ctype2 U - -Curiously, __ctype2 is undefined, in spite of being declared in -/usr/include/ctype.h in exactly the same way as __ctype. - -Any information helping to solve this issue would be deeply -appreciated. - -NOTE: building non-shared doesn't come with this problem. - -* ULTRIX build fails with shell errors, such as "bad substitution" - and "test: argument expected" - -The problem is caused by ULTRIX /bin/sh supporting only original -Bourne shell syntax/semantics, and the trouble is that the vast -majority is so accustomed to more modern syntax, that very few -people [if any] would recognize the ancient syntax even as valid. -This inevitably results in non-trivial scripts breaking on ULTRIX, -and OpenSSL isn't an exclusion. Fortunately there is workaround, -hire /bin/ksh to do the job /bin/sh fails to do. - -1. Trick make(1) to use /bin/ksh by setting up following environ- - ment variables *prior* you execute ./Configure and make: - - PROG_ENV=POSIX - MAKESHELL=/bin/ksh - export PROG_ENV MAKESHELL - - or if your shell is csh-compatible: - - setenv PROG_ENV POSIX - setenv MAKESHELL /bin/ksh - -2. Trick /bin/sh to use alternative expression evaluator. Create - following 'test' script for example in /tmp: - - #!/bin/ksh - ${0##*/} "$@" - - Then 'chmod a+x /tmp/test; ln /tmp/test /tmp/[' and *prepend* - your $PATH with chosen location, e.g. PATH=/tmp:$PATH. Alter- - natively just replace system /bin/test and /bin/[ with the - above script. - -* hpux64-ia64-cc fails blowfish test. - -Compiler bug, presumably at particular patch level. It should be noted -that same compiler generates correct 32-bit code, a.k.a. hpux-ia64-cc -target. Drop optimization level to +O2 when compiling 64-bit bf_skey.o. - -* no-engines generates errors. - -Unfortunately, the 'no-engines' configuration option currently doesn't -work properly. Use 'no-hw' and you'll will at least get no hardware -support. We'll see how we fix that on OpenSSL versions past 0.9.8. - -* 'make test' fails in BN_sqr [commonly with "error 139" denoting SIGSEGV] - if elder GNU binutils were deployed to link shared libcrypto.so. - -As subject suggests the failure is caused by a bug in elder binutils, -either as or ld, and was observed on FreeBSD and Linux. There are two -options. First is naturally to upgrade binutils, the second one - to -reconfigure with additional no-sse2 [or 386] option passed to ./config. - -* If configured with ./config no-dso, toolkit still gets linked with -ldl, - which most notably poses a problem when linking with dietlibc. - -We don't have framework to associate -ldl with no-dso, therefore the only -way is to edit Makefile right after ./config no-dso and remove -ldl from -EX_LIBS line. - -* hpux-parisc2-cc no-asm build fails with SEGV in ECDSA/DH. - -Compiler bug, presumably at particular patch level. Remaining -hpux*-parisc*-cc configurations can be affected too. Drop optimization -level to +O2 when compiling bn_nist.o. - -* solaris64-sparcv9-cc link failure - -Solaris 8 ar can fail to maintain symbol table in .a, which results in -link failures. Apply 109147-09 or later or modify Makefile generated -by ./Configure solaris64-sparcv9-cc and replace RANLIB assignment with - - RANLIB= /usr/ccs/bin/ar rs |