diff options
Diffstat (limited to 'deps/icu-small/source/i18n/unicode/uregex.h')
| -rw-r--r-- | deps/icu-small/source/i18n/unicode/uregex.h | 1612 |
1 files changed, 1612 insertions, 0 deletions
diff --git a/deps/icu-small/source/i18n/unicode/uregex.h b/deps/icu-small/source/i18n/unicode/uregex.h new file mode 100644 index 0000000000..c51acd5f40 --- /dev/null +++ b/deps/icu-small/source/i18n/unicode/uregex.h @@ -0,0 +1,1612 @@ +/* +********************************************************************** +* Copyright (C) 2004-2016, International Business Machines +* Corporation and others. All Rights Reserved. +********************************************************************** +* file name: uregex.h +* encoding: US-ASCII +* indentation:4 +* +* created on: 2004mar09 +* created by: Andy Heninger +* +* ICU Regular Expressions, API for C +*/ + +/** + * \file + * \brief C API: Regular Expressions + * + * <p>This is a C wrapper around the C++ RegexPattern and RegexMatcher classes.</p> + */ + +#ifndef UREGEX_H +#define UREGEX_H + +#include "unicode/utext.h" +#include "unicode/utypes.h" + +#if !UCONFIG_NO_REGULAR_EXPRESSIONS + +#include "unicode/localpointer.h" +#include "unicode/parseerr.h" + +struct URegularExpression; +/** + * Structure representing a compiled regular expression, plus the results + * of a match operation. + * @stable ICU 3.0 + */ +typedef struct URegularExpression URegularExpression; + + +/** + * Constants for Regular Expression Match Modes. + * @stable ICU 2.4 + */ +typedef enum URegexpFlag{ + +#ifndef U_HIDE_DRAFT_API + /** Forces normalization of pattern and strings. + Not implemented yet, just a placeholder, hence draft. + @draft ICU 2.4 */ + UREGEX_CANON_EQ = 128, +#endif /* U_HIDE_DRAFT_API */ + /** Enable case insensitive matching. @stable ICU 2.4 */ + UREGEX_CASE_INSENSITIVE = 2, + + /** Allow white space and comments within patterns @stable ICU 2.4 */ + UREGEX_COMMENTS = 4, + + /** If set, '.' matches line terminators, otherwise '.' matching stops at line end. + * @stable ICU 2.4 */ + UREGEX_DOTALL = 32, + + /** If set, treat the entire pattern as a literal string. + * Metacharacters or escape sequences in the input sequence will be given + * no special meaning. + * + * The flag UREGEX_CASE_INSENSITIVE retains its impact + * on matching when used in conjunction with this flag. + * The other flags become superfluous. + * + * @stable ICU 4.0 + */ + UREGEX_LITERAL = 16, + + /** Control behavior of "$" and "^" + * If set, recognize line terminators within string, + * otherwise, match only at start and end of input string. + * @stable ICU 2.4 */ + UREGEX_MULTILINE = 8, + + /** Unix-only line endings. + * When this mode is enabled, only \\u000a is recognized as a line ending + * in the behavior of ., ^, and $. + * @stable ICU 4.0 + */ + UREGEX_UNIX_LINES = 1, + + /** Unicode word boundaries. + * If set, \b uses the Unicode TR 29 definition of word boundaries. + * Warning: Unicode word boundaries are quite different from + * traditional regular expression word boundaries. See + * http://unicode.org/reports/tr29/#Word_Boundaries + * @stable ICU 2.8 + */ + UREGEX_UWORD = 256, + + /** Error on Unrecognized backslash escapes. + * If set, fail with an error on patterns that contain + * backslash-escaped ASCII letters without a known special + * meaning. If this flag is not set, these + * escaped letters represent themselves. + * @stable ICU 4.0 + */ + UREGEX_ERROR_ON_UNKNOWN_ESCAPES = 512 + +} URegexpFlag; + +/** + * Open (compile) an ICU regular expression. Compiles the regular expression in + * string form into an internal representation using the specified match mode flags. + * The resulting regular expression handle can then be used to perform various + * matching operations. + * + * + * @param pattern The Regular Expression pattern to be compiled. + * @param patternLength The length of the pattern, or -1 if the pattern is + * NUL terminated. + * @param flags Flags that alter the default matching behavior for + * the regular expression, UREGEX_CASE_INSENSITIVE, for + * example. For default behavior, set this parameter to zero. + * See <code>enum URegexpFlag</code>. All desired flags + * are bitwise-ORed together. + * @param pe Receives the position (line and column numbers) of any syntax + * error within the source regular expression string. If this + * information is not wanted, pass NULL for this parameter. + * @param status Receives error detected by this function. + * @stable ICU 3.0 + * + */ +U_STABLE URegularExpression * U_EXPORT2 +uregex_open( const UChar *pattern, + int32_t patternLength, + uint32_t flags, + UParseError *pe, + UErrorCode *status); + +/** + * Open (compile) an ICU regular expression. Compiles the regular expression in + * string form into an internal representation using the specified match mode flags. + * The resulting regular expression handle can then be used to perform various + * matching operations. + * <p> + * The contents of the pattern UText will be extracted and saved. Ownership of the + * UText struct itself remains with the caller. This is to match the behavior of + * uregex_open(). + * + * @param pattern The Regular Expression pattern to be compiled. + * @param flags Flags that alter the default matching behavior for + * the regular expression, UREGEX_CASE_INSENSITIVE, for + * example. For default behavior, set this parameter to zero. + * See <code>enum URegexpFlag</code>. All desired flags + * are bitwise-ORed together. + * @param pe Receives the position (line and column numbers) of any syntax + * error within the source regular expression string. If this + * information is not wanted, pass NULL for this parameter. + * @param status Receives error detected by this function. + * + * @stable ICU 4.6 + */ +U_STABLE URegularExpression * U_EXPORT2 +uregex_openUText(UText *pattern, + uint32_t flags, + UParseError *pe, + UErrorCode *status); + +/** + * Open (compile) an ICU regular expression. The resulting regular expression + * handle can then be used to perform various matching operations. + * <p> + * This function is the same as uregex_open, except that the pattern + * is supplied as an 8 bit char * string in the default code page. + * + * @param pattern The Regular Expression pattern to be compiled, + * NUL terminated. + * @param flags Flags that alter the default matching behavior for + * the regular expression, UREGEX_CASE_INSENSITIVE, for + * example. For default behavior, set this parameter to zero. + * See <code>enum URegexpFlag</code>. All desired flags + * are bitwise-ORed together. + * @param pe Receives the position (line and column numbers) of any syntax + * error within the source regular expression string. If this + * information is not wanted, pass NULL for this parameter. + * @param status Receives errors detected by this function. + * @return The URegularExpression object representing the compiled + * pattern. + * + * @stable ICU 3.0 + */ +#if !UCONFIG_NO_CONVERSION +U_STABLE URegularExpression * U_EXPORT2 +uregex_openC( const char *pattern, + uint32_t flags, + UParseError *pe, + UErrorCode *status); +#endif + + + +/** + * Close the regular expression, recovering all resources (memory) it + * was holding. + * + * @param regexp The regular expression to be closed. + * @stable ICU 3.0 + */ +U_STABLE void U_EXPORT2 +uregex_close(URegularExpression *regexp); + +#if U_SHOW_CPLUSPLUS_API + +U_NAMESPACE_BEGIN + +/** + * \class LocalURegularExpressionPointer + * "Smart pointer" class, closes a URegularExpression via uregex_close(). + * For most methods see the LocalPointerBase base class. + * + * @see LocalPointerBase + * @see LocalPointer + * @stable ICU 4.4 + */ +U_DEFINE_LOCAL_OPEN_POINTER(LocalURegularExpressionPointer, URegularExpression, uregex_close); + +U_NAMESPACE_END + +#endif + +/** + * Make a copy of a compiled regular expression. Cloning a regular + * expression is faster than opening a second instance from the source + * form of the expression, and requires less memory. + * <p> + * Note that the current input string and the position of any matched text + * within it are not cloned; only the pattern itself and the + * match mode flags are copied. + * <p> + * Cloning can be particularly useful to threaded applications that perform + * multiple match operations in parallel. Each concurrent RE + * operation requires its own instance of a URegularExpression. + * + * @param regexp The compiled regular expression to be cloned. + * @param status Receives indication of any errors encountered + * @return the cloned copy of the compiled regular expression. + * @stable ICU 3.0 + */ +U_STABLE URegularExpression * U_EXPORT2 +uregex_clone(const URegularExpression *regexp, UErrorCode *status); + +/** + * Returns a pointer to the source form of the pattern for this regular expression. + * This function will work even if the pattern was originally specified as a UText. + * + * @param regexp The compiled regular expression. + * @param patLength This output parameter will be set to the length of the + * pattern string. A NULL pointer may be used here if the + * pattern length is not needed, as would be the case if + * the pattern is known in advance to be a NUL terminated + * string. + * @param status Receives errors detected by this function. + * @return a pointer to the pattern string. The storage for the string is + * owned by the regular expression object, and must not be + * altered or deleted by the application. The returned string + * will remain valid until the regular expression is closed. + * @stable ICU 3.0 + */ +U_STABLE const UChar * U_EXPORT2 +uregex_pattern(const URegularExpression *regexp, + int32_t *patLength, + UErrorCode *status); + +/** + * Returns the source text of the pattern for this regular expression. + * This function will work even if the pattern was originally specified as a UChar string. + * + * @param regexp The compiled regular expression. + * @param status Receives errors detected by this function. + * @return the pattern text. The storage for the text is owned by the regular expression + * object, and must not be altered or deleted. + * + * @stable ICU 4.6 + */ +U_STABLE UText * U_EXPORT2 +uregex_patternUText(const URegularExpression *regexp, + UErrorCode *status); + +/** + * Get the match mode flags that were specified when compiling this regular expression. + * @param status Receives errors detected by this function. + * @param regexp The compiled regular expression. + * @return The match mode flags + * @see URegexpFlag + * @stable ICU 3.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_flags(const URegularExpression *regexp, + UErrorCode *status); + + +/** + * Set the subject text string upon which the regular expression will look for matches. + * This function may be called any number of times, allowing the regular + * expression pattern to be applied to different strings. + * <p> + * Regular expression matching operations work directly on the application's + * string data. No copy is made. The subject string data must not be + * altered after calling this function until after all regular expression + * operations involving this string data are completed. + * <p> + * Zero length strings are permitted. In this case, no subsequent match + * operation will dereference the text string pointer. + * + * @param regexp The compiled regular expression. + * @param text The subject text string. + * @param textLength The length of the subject text, or -1 if the string + * is NUL terminated. + * @param status Receives errors detected by this function. + * @stable ICU 3.0 + */ +U_STABLE void U_EXPORT2 +uregex_setText(URegularExpression *regexp, + const UChar *text, + int32_t textLength, + UErrorCode *status); + + +/** + * Set the subject text string upon which the regular expression will look for matches. + * This function may be called any number of times, allowing the regular + * expression pattern to be applied to different strings. + * <p> + * Regular expression matching operations work directly on the application's + * string data; only a shallow clone is made. The subject string data must not be + * altered after calling this function until after all regular expression + * operations involving this string data are completed. + * + * @param regexp The compiled regular expression. + * @param text The subject text string. + * @param status Receives errors detected by this function. + * + * @stable ICU 4.6 + */ +U_STABLE void U_EXPORT2 +uregex_setUText(URegularExpression *regexp, + UText *text, + UErrorCode *status); + +/** + * Get the subject text that is currently associated with this + * regular expression object. If the input was supplied using uregex_setText(), + * that pointer will be returned. Otherwise, the characters in the input will + * be extracted to a buffer and returned. In either case, ownership remains + * with the regular expression object. + * + * This function will work even if the input was originally specified as a UText. + * + * @param regexp The compiled regular expression. + * @param textLength The length of the string is returned in this output parameter. + * A NULL pointer may be used here if the + * text length is not needed, as would be the case if + * the text is known in advance to be a NUL terminated + * string. + * @param status Receives errors detected by this function. + * @return Pointer to the subject text string currently associated with + * this regular expression. + * @stable ICU 3.0 + */ +U_STABLE const UChar * U_EXPORT2 +uregex_getText(URegularExpression *regexp, + int32_t *textLength, + UErrorCode *status); + +/** + * Get the subject text that is currently associated with this + * regular expression object. + * + * This function will work even if the input was originally specified as a UChar string. + * + * @param regexp The compiled regular expression. + * @param dest A mutable UText in which to store the current input. + * If NULL, a new UText will be created as an immutable shallow clone + * of the actual input string. + * @param status Receives errors detected by this function. + * @return The subject text currently associated with this regular expression. + * If a pre-allocated UText was provided, it will always be used and returned. + * + * @stable ICU 4.6 + */ +U_STABLE UText * U_EXPORT2 +uregex_getUText(URegularExpression *regexp, + UText *dest, + UErrorCode *status); + +/** + * Set the subject text string upon which the regular expression is looking for matches + * without changing any other aspect of the matching state. + * The new and previous text strings must have the same content. + * + * This function is intended for use in environments where ICU is operating on + * strings that may move around in memory. It provides a mechanism for notifying + * ICU that the string has been relocated, and providing a new UText to access the + * string in its new position. + * + * Note that the regular expression implementation never copies the underlying text + * of a string being matched, but always operates directly on the original text + * provided by the user. Refreshing simply drops the references to the old text + * and replaces them with references to the new. + * + * Caution: this function is normally used only by very specialized + * system-level code. One example use case is with garbage collection + * that moves the text in memory. + * + * @param regexp The compiled regular expression. + * @param text The new (moved) text string. + * @param status Receives errors detected by this function. + * + * @stable ICU 4.8 + */ +U_STABLE void U_EXPORT2 +uregex_refreshUText(URegularExpression *regexp, + UText *text, + UErrorCode *status); + +/** + * Attempts to match the input string against the pattern. + * To succeed, the match must extend to the end of the string, + * or cover the complete match region. + * + * If startIndex >= zero the match operation starts at the specified + * index and must extend to the end of the input string. Any region + * that has been specified is reset. + * + * If startIndex == -1 the match must cover the input region, or the entire + * input string if no region has been set. This directly corresponds to + * Matcher.matches() in Java + * + * @param regexp The compiled regular expression. + * @param startIndex The input string (native) index at which to begin matching, or -1 + * to match the input Region. + * @param status Receives errors detected by this function. + * @return TRUE if there is a match + * @stable ICU 3.0 + */ +U_STABLE UBool U_EXPORT2 +uregex_matches(URegularExpression *regexp, + int32_t startIndex, + UErrorCode *status); + +/** + * 64bit version of uregex_matches. + * Attempts to match the input string against the pattern. + * To succeed, the match must extend to the end of the string, + * or cover the complete match region. + * + * If startIndex >= zero the match operation starts at the specified + * index and must extend to the end of the input string. Any region + * that has been specified is reset. + * + * If startIndex == -1 the match must cover the input region, or the entire + * input string if no region has been set. This directly corresponds to + * Matcher.matches() in Java + * + * @param regexp The compiled regular expression. + * @param startIndex The input string (native) index at which to begin matching, or -1 + * to match the input Region. + * @param status Receives errors detected by this function. + * @return TRUE if there is a match + * @stable ICU 4.6 + */ +U_STABLE UBool U_EXPORT2 +uregex_matches64(URegularExpression *regexp, + int64_t startIndex, + UErrorCode *status); + +/** + * Attempts to match the input string, starting from the specified index, against the pattern. + * The match may be of any length, and is not required to extend to the end + * of the input string. Contrast with uregex_matches(). + * + * <p>If startIndex is >= 0 any input region that was set for this + * URegularExpression is reset before the operation begins. + * + * <p>If the specified starting index == -1 the match begins at the start of the input + * region, or at the start of the full string if no region has been specified. + * This corresponds directly with Matcher.lookingAt() in Java. + * + * <p>If the match succeeds then more information can be obtained via the + * <code>uregexp_start()</code>, <code>uregexp_end()</code>, + * and <code>uregex_group()</code> functions.</p> + * + * @param regexp The compiled regular expression. + * @param startIndex The input string (native) index at which to begin matching, or + * -1 to match the Input Region + * @param status A reference to a UErrorCode to receive any errors. + * @return TRUE if there is a match. + * @stable ICU 3.0 + */ +U_STABLE UBool U_EXPORT2 +uregex_lookingAt(URegularExpression *regexp, + int32_t startIndex, + UErrorCode *status); + +/** + * 64bit version of uregex_lookingAt. + * Attempts to match the input string, starting from the specified index, against the pattern. + * The match may be of any length, and is not required to extend to the end + * of the input string. Contrast with uregex_matches(). + * + * <p>If startIndex is >= 0 any input region that was set for this + * URegularExpression is reset before the operation begins. + * + * <p>If the specified starting index == -1 the match begins at the start of the input + * region, or at the start of the full string if no region has been specified. + * This corresponds directly with Matcher.lookingAt() in Java. + * + * <p>If the match succeeds then more information can be obtained via the + * <code>uregexp_start()</code>, <code>uregexp_end()</code>, + * and <code>uregex_group()</code> functions.</p> + * + * @param regexp The compiled regular expression. + * @param startIndex The input string (native) index at which to begin matching, or + * -1 to match the Input Region + * @param status A reference to a UErrorCode to receive any errors. + * @return TRUE if there is a match. + * @stable ICU 4.6 + */ +U_STABLE UBool U_EXPORT2 +uregex_lookingAt64(URegularExpression *regexp, + int64_t startIndex, + UErrorCode *status); + +/** + * Find the first matching substring of the input string that matches the pattern. + * If startIndex is >= zero the search for a match begins at the specified index, + * and any match region is reset. This corresponds directly with + * Matcher.find(startIndex) in Java. + * + * If startIndex == -1 the search begins at the start of the input region, + * or at the start of the full string if no region has been specified. + * + * If a match is found, <code>uregex_start(), uregex_end()</code>, and + * <code>uregex_group()</code> will provide more information regarding the match. + * + * @param regexp The compiled regular expression. + * @param startIndex The position (native) in the input string to begin the search, or + * -1 to search within the Input Region. + * @param status A reference to a UErrorCode to receive any errors. + * @return TRUE if a match is found. + * @stable ICU 3.0 + */ +U_STABLE UBool U_EXPORT2 +uregex_find(URegularExpression *regexp, + int32_t startIndex, + UErrorCode *status); + +/** + * 64bit version of uregex_find. + * Find the first matching substring of the input string that matches the pattern. + * If startIndex is >= zero the search for a match begins at the specified index, + * and any match region is reset. This corresponds directly with + * Matcher.find(startIndex) in Java. + * + * If startIndex == -1 the search begins at the start of the input region, + * or at the start of the full string if no region has been specified. + * + * If a match is found, <code>uregex_start(), uregex_end()</code>, and + * <code>uregex_group()</code> will provide more information regarding the match. + * + * @param regexp The compiled regular expression. + * @param startIndex The position (native) in the input string to begin the search, or + * -1 to search within the Input Region. + * @param status A reference to a UErrorCode to receive any errors. + * @return TRUE if a match is found. + * @stable ICU 4.6 + */ +U_STABLE UBool U_EXPORT2 +uregex_find64(URegularExpression *regexp, + int64_t startIndex, + UErrorCode *status); + +/** + * Find the next pattern match in the input string. Begin searching + * the input at the location following the end of he previous match, + * or at the start of the string (or region) if there is no + * previous match. If a match is found, <code>uregex_start(), uregex_end()</code>, and + * <code>uregex_group()</code> will provide more information regarding the match. + * + * @param regexp The compiled regular expression. + * @param status A reference to a UErrorCode to receive any errors. + * @return TRUE if a match is found. + * @see uregex_reset + * @stable ICU 3.0 + */ +U_STABLE UBool U_EXPORT2 +uregex_findNext(URegularExpression *regexp, + UErrorCode *status); + +/** + * Get the number of capturing groups in this regular expression's pattern. + * @param regexp The compiled regular expression. + * @param status A reference to a UErrorCode to receive any errors. + * @return the number of capture groups + * @stable ICU 3.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_groupCount(URegularExpression *regexp, + UErrorCode *status); + +/** + * Get the group number corresponding to a named capture group. + * The returned number can be used with any function that access + * capture groups by number. + * + * The function returns an error status if the specified name does not + * appear in the pattern. + * + * @param regexp The compiled regular expression. + * @param groupName The capture group name. + * @param nameLength The length of the name, or -1 if the name is a + * nul-terminated string. + * @param status A pointer to a UErrorCode to receive any errors. + * + * @stable ICU 55 + */ +U_STABLE int32_t U_EXPORT2 +uregex_groupNumberFromName(URegularExpression *regexp, + const UChar *groupName, + int32_t nameLength, + UErrorCode *status); + + +/** + * Get the group number corresponding to a named capture group. + * The returned number can be used with any function that access + * capture groups by number. + * + * The function returns an error status if the specified name does not + * appear in the pattern. + * + * @param regexp The compiled regular expression. + * @param groupName The capture group name, + * platform invariant characters only. + * @param nameLength The length of the name, or -1 if the name is + * nul-terminated. + * @param status A pointer to a UErrorCode to receive any errors. + * + * @stable ICU 55 + */ +U_STABLE int32_t U_EXPORT2 +uregex_groupNumberFromCName(URegularExpression *regexp, + const char *groupName, + int32_t nameLength, + UErrorCode *status); + +/** Extract the string for the specified matching expression or subexpression. + * Group #0 is the complete string of matched text. + * Group #1 is the text matched by the first set of capturing parentheses. + * + * @param regexp The compiled regular expression. + * @param groupNum The capture group to extract. Group 0 is the complete + * match. The value of this parameter must be + * less than or equal to the number of capture groups in + * the pattern. + * @param dest Buffer to receive the matching string data + * @param destCapacity Capacity of the dest buffer. + * @param status A reference to a UErrorCode to receive any errors. + * @return Length of matching data, + * or -1 if no applicable match. + * @stable ICU 3.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_group(URegularExpression *regexp, + int32_t groupNum, + UChar *dest, + int32_t destCapacity, + UErrorCode *status); + +/** Returns a shallow immutable clone of the entire input string with the current index set + * to the beginning of the requested capture group. The capture group length is also + * returned via groupLength. + * Group #0 is the complete string of matched text. + * Group #1 is the text matched by the first set of capturing parentheses. + * + * @param regexp The compiled regular expression. + * @param groupNum The capture group to extract. Group 0 is the complete + * match. The value of this parameter must be + * less than or equal to the number of capture groups in + * the pattern. + * @param dest A mutable UText in which to store the current input. + * If NULL, a new UText will be created as an immutable shallow clone + * of the entire input string. + * @param groupLength The group length of the desired capture group. Output parameter. + * @param status A reference to a UErrorCode to receive any errors. + * @return The subject text currently associated with this regular expression. + * If a pre-allocated UText was provided, it will always be used and returned. + + * + * @stable ICU 4.6 + */ +U_STABLE UText * U_EXPORT2 +uregex_groupUText(URegularExpression *regexp, + int32_t groupNum, + UText *dest, + int64_t *groupLength, + UErrorCode *status); + +/** + * Returns the index in the input string of the start of the text matched by the + * specified capture group during the previous match operation. Return -1 if + * the capture group was not part of the last match. + * Group #0 refers to the complete range of matched text. + * Group #1 refers to the text matched by the first set of capturing parentheses. + * + * @param regexp The compiled regular expression. + * @param groupNum The capture group number + * @param status A reference to a UErrorCode to receive any errors. + * @return the starting (native) position in the input of the text matched + * by the specified group. + * @stable ICU 3.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_start(URegularExpression *regexp, + int32_t groupNum, + UErrorCode *status); + +/** + * 64bit version of uregex_start. + * Returns the index in the input string of the start of the text matched by the + * specified capture group during the previous match operation. Return -1 if + * the capture group was not part of the last match. + * Group #0 refers to the complete range of matched text. + * Group #1 refers to the text matched by the first set of capturing parentheses. + * + * @param regexp The compiled regular expression. + * @param groupNum The capture group number + * @param status A reference to a UErrorCode to receive any errors. + * @return the starting (native) position in the input of the text matched + * by the specified group. + * @stable ICU 4.6 + */ +U_STABLE int64_t U_EXPORT2 +uregex_start64(URegularExpression *regexp, + int32_t groupNum, + UErrorCode *status); + +/** + * Returns the index in the input string of the position following the end + * of the text matched by the specified capture group. + * Return -1 if the capture group was not part of the last match. + * Group #0 refers to the complete range of matched text. + * Group #1 refers to the text matched by the first set of capturing parentheses. + * + * @param regexp The compiled regular expression. + * @param groupNum The capture group number + * @param status A reference to a UErrorCode to receive any errors. + * @return the (native) index of the position following the last matched character. + * @stable ICU 3.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_end(URegularExpression *regexp, + int32_t groupNum, + UErrorCode *status); + +/** + * 64bit version of uregex_end. + * Returns the index in the input string of the position following the end + * of the text matched by the specified capture group. + * Return -1 if the capture group was not part of the last match. + * Group #0 refers to the complete range of matched text. + * Group #1 refers to the text matched by the first set of capturing parentheses. + * + * @param regexp The compiled regular expression. + * @param groupNum The capture group number + * @param status A reference to a UErrorCode to receive any errors. + * @return the (native) index of the position following the last matched character. + * @stable ICU 4.6 + */ +U_STABLE int64_t U_EXPORT2 +uregex_end64(URegularExpression *regexp, + int32_t groupNum, + UErrorCode *status); + +/** + * Reset any saved state from the previous match. Has the effect of + * causing uregex_findNext to begin at the specified index, and causing + * uregex_start(), uregex_end() and uregex_group() to return an error + * indicating that there is no match information available. Clears any + * match region that may have been set. + * + * @param regexp The compiled regular expression. + * @param index The position (native) in the text at which a + * uregex_findNext() should begin searching. + * @param status A reference to a UErrorCode to receive any errors. + * @stable ICU 3.0 + */ +U_STABLE void U_EXPORT2 +uregex_reset(URegularExpression *regexp, + int32_t index, + UErrorCode *status); + +/** + * 64bit version of uregex_reset. + * Reset any saved state from the previous match. Has the effect of + * causing uregex_findNext to begin at the specified index, and causing + * uregex_start(), uregex_end() and uregex_group() to return an error + * indicating that there is no match information available. Clears any + * match region that may have been set. + * + * @param regexp The compiled regular expression. + * @param index The position (native) in the text at which a + * uregex_findNext() should begin searching. + * @param status A reference to a UErrorCode to receive any errors. + * @stable ICU 4.6 + */ +U_STABLE void U_EXPORT2 +uregex_reset64(URegularExpression *regexp, + int64_t index, + UErrorCode *status); + +/** + * Sets the limits of the matching region for this URegularExpression. + * The region is the part of the input string that will be considered when matching. + * Invoking this method resets any saved state from the previous match, + * then sets the region to start at the index specified by the start parameter + * and end at the index specified by the end parameter. + * + * Depending on the transparency and anchoring being used (see useTransparentBounds + * and useAnchoringBounds), certain constructs such as anchors may behave differently + * at or around the boundaries of the region + * + * The function will fail if start is greater than limit, or if either index + * is less than zero or greater than the length of the string being matched. + * + * @param regexp The compiled regular expression. + * @param regionStart The (native) index to begin searches at. + * @param regionLimit The (native) index to end searches at (exclusive). + * @param status A pointer to a UErrorCode to receive any errors. + * @stable ICU 4.0 + */ +U_STABLE void U_EXPORT2 +uregex_setRegion(URegularExpression *regexp, + int32_t regionStart, + int32_t regionLimit, + UErrorCode *status); + +/** + * 64bit version of uregex_setRegion. + * Sets the limits of the matching region for this URegularExpression. + * The region is the part of the input string that will be considered when matching. + * Invoking this method resets any saved state from the previous match, + * then sets the region to start at the index specified by the start parameter + * and end at the index specified by the end parameter. + * + * Depending on the transparency and anchoring being used (see useTransparentBounds + * and useAnchoringBounds), certain constructs such as anchors may behave differently + * at or around the boundaries of the region + * + * The function will fail if start is greater than limit, or if either index + * is less than zero or greater than the length of the string being matched. + * + * @param regexp The compiled regular expression. + * @param regionStart The (native) index to begin searches at. + * @param regionLimit The (native) index to end searches at (exclusive). + * @param status A pointer to a UErrorCode to receive any errors. + * @stable ICU 4.6 + */ +U_STABLE void U_EXPORT2 +uregex_setRegion64(URegularExpression *regexp, + int64_t regionStart, + int64_t regionLimit, + UErrorCode *status); + +/** + * Set the matching region and the starting index for subsequent matches + * in a single operation. + * This is useful because the usual function for setting the starting + * index, urgex_reset(), also resets any region limits. + * + * @param regexp The compiled regular expression. + * @param regionStart The (native) index to begin searches at. + * @param regionLimit The (native) index to end searches at (exclusive). + * @param startIndex The index in the input text at which the next + * match operation should begin. + * @param status A pointer to a UErrorCode to receive any errors. + * @stable ICU 4.6 + */ +U_STABLE void U_EXPORT2 +uregex_setRegionAndStart(URegularExpression *regexp, + int64_t regionStart, + int64_t regionLimit, + int64_t startIndex, + UErrorCode *status); + +/** + * Reports the start index of the matching region. Any matches found are limited to + * to the region bounded by regionStart (inclusive) and regionEnd (exclusive). + * + * @param regexp The compiled regular expression. + * @param status A pointer to a UErrorCode to receive any errors. + * @return The starting (native) index of this matcher's region. + * @stable ICU 4.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_regionStart(const URegularExpression *regexp, + UErrorCode *status); + +/** + * 64bit version of uregex_regionStart. + * Reports the start index of the matching region. Any matches found are limited to + * to the region bounded by regionStart (inclusive) and regionEnd (exclusive). + * + * @param regexp The compiled regular expression. + * @param status A pointer to a UErrorCode to receive any errors. + * @return The starting (native) index of this matcher's region. + * @stable ICU 4.6 + */ +U_STABLE int64_t U_EXPORT2 +uregex_regionStart64(const URegularExpression *regexp, + UErrorCode *status); + +/** + * Reports the end index (exclusive) of the matching region for this URegularExpression. + * Any matches found are limited to to the region bounded by regionStart (inclusive) + * and regionEnd (exclusive). + * + * @param regexp The compiled regular expression. + * @param status A pointer to a UErrorCode to receive any errors. + * @return The ending point (native) of this matcher's region. + * @stable ICU 4.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_regionEnd(const URegularExpression *regexp, + UErrorCode *status); + +/** + * 64bit version of uregex_regionEnd. + * Reports the end index (exclusive) of the matching region for this URegularExpression. + * Any matches found are limited to to the region bounded by regionStart (inclusive) + * and regionEnd (exclusive). + * + * @param regexp The compiled regular expression. + * @param status A pointer to a UErrorCode to receive any errors. + * @return The ending point (native) of this matcher's region. + * @stable ICU 4.6 + */ +U_STABLE int64_t U_EXPORT2 +uregex_regionEnd64(const URegularExpression *regexp, + UErrorCode *status); + +/** + * Queries the transparency of region bounds for this URegularExpression. + * See useTransparentBounds for a description of transparent and opaque bounds. + * By default, matching boundaries are opaque. + * + * @param regexp The compiled regular expression. + * @param status A pointer to a UErrorCode to receive any errors. + * @return TRUE if this matcher is using opaque bounds, false if it is not. + * @stable ICU 4.0 + */ +U_STABLE UBool U_EXPORT2 +uregex_hasTransparentBounds(const URegularExpression *regexp, + UErrorCode *status); + + +/** + * Sets the transparency of region bounds for this URegularExpression. + * Invoking this function with an argument of TRUE will set matches to use transparent bounds. + * If the boolean argument is FALSE, then opaque bounds will be used. + * + * Using transparent bounds, the boundaries of the matching region are transparent + * to lookahead, lookbehind, and boundary matching constructs. Those constructs can + * see text beyond the boundaries of the region while checking for a match. + * + * With opaque bounds, no text outside of the matching region is visible to lookahead, + * lookbehind, and boundary matching constructs. + * + * By default, opaque bounds are used. + * + * @param regexp The compiled regular expression. + * @param b TRUE for transparent bounds; FALSE for opaque bounds + * @param status A pointer to a UErrorCode to receive any errors. + * @stable ICU 4.0 + **/ +U_STABLE void U_EXPORT2 +uregex_useTransparentBounds(URegularExpression *regexp, + UBool b, + UErrorCode *status); + + +/** + * Return true if this URegularExpression is using anchoring bounds. + * By default, anchoring region bounds are used. + * + * @param regexp The compiled regular expression. + * @param status A pointer to a UErrorCode to receive any errors. + * @return TRUE if this matcher is using anchoring bounds. + * @stable ICU 4.0 + */ +U_STABLE UBool U_EXPORT2 +uregex_hasAnchoringBounds(const URegularExpression *regexp, + UErrorCode *status); + + +/** + * Set whether this URegularExpression is using Anchoring Bounds for its region. + * With anchoring bounds, pattern anchors such as ^ and $ will match at the start + * and end of the region. Without Anchoring Bounds, anchors will only match at + * the positions they would in the complete text. + * + * Anchoring Bounds are the default for regions. + * + * @param regexp The compiled regular expression. + * @param b TRUE if to enable anchoring bounds; FALSE to disable them. + * @param status A pointer to a UErrorCode to receive any errors. + * @stable ICU 4.0 + */ +U_STABLE void U_EXPORT2 +uregex_useAnchoringBounds(URegularExpression *regexp, + UBool b, + UErrorCode *status); + +/** + * Return TRUE if the most recent matching operation touched the + * end of the text being processed. In this case, additional input text could + * change the results of that match. + * + * @param regexp The compiled regular expression. + * @param status A pointer to a UErrorCode to receive any errors. + * @return TRUE if the most recent match hit the end of input + * @stable ICU 4.0 + */ +U_STABLE UBool U_EXPORT2 +uregex_hitEnd(const URegularExpression *regexp, + UErrorCode *status); + +/** + * Return TRUE the most recent match succeeded and additional input could cause + * it to fail. If this function returns false and a match was found, then more input + * might change the match but the match won't be lost. If a match was not found, + * then requireEnd has no meaning. + * + * @param regexp The compiled regular expression. + * @param status A pointer to a UErrorCode to receive any errors. + * @return TRUE if more input could cause the most recent match to no longer match. + * @stable ICU 4.0 + */ +U_STABLE UBool U_EXPORT2 +uregex_requireEnd(const URegularExpression *regexp, + UErrorCode *status); + + + + + +/** + * Replaces every substring of the input that matches the pattern + * with the given replacement string. This is a convenience function that + * provides a complete find-and-replace-all operation. + * + * This method scans the input string looking for matches of the pattern. + * Input that is not part of any match is copied unchanged to the + * destination buffer. Matched regions are replaced in the output + * buffer by the replacement string. The replacement string may contain + * references to capture groups; these take the form of $1, $2, etc. + * + * @param regexp The compiled regular expression. + * @param replacementText A string containing the replacement text. + * @param replacementLength The length of the replacement string, or + * -1 if it is NUL terminated. + * @param destBuf A (UChar *) buffer that will receive the result. + * @param destCapacity The capacity of the destination buffer. + * @param status A reference to a UErrorCode to receive any errors. + * @return The length of the string resulting from the find + * and replace operation. In the event that the + * destination capacity is inadequate, the return value + * is still the full length of the untruncated string. + * @stable ICU 3.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_replaceAll(URegularExpression *regexp, + const UChar *replacementText, + int32_t replacementLength, + UChar *destBuf, + int32_t destCapacity, + UErrorCode *status); + +/** + * Replaces every substring of the input that matches the pattern + * with the given replacement string. This is a convenience function that + * provides a complete find-and-replace-all operation. + * + * This method scans the input string looking for matches of the pattern. + * Input that is not part of any match is copied unchanged to the + * destination buffer. Matched regions are replaced in the output + * buffer by the replacement string. The replacement string may contain + * references to capture groups; these take the form of $1, $2, etc. + * + * @param regexp The compiled regular expression. + * @param replacement A string containing the replacement text. + * @param dest A mutable UText that will receive the result. + * If NULL, a new UText will be created (which may not be mutable). + * @param status A reference to a UErrorCode to receive any errors. + * @return A UText containing the results of the find and replace. + * If a pre-allocated UText was provided, it will always be used and returned. + * + * @stable ICU 4.6 + */ +U_STABLE UText * U_EXPORT2 +uregex_replaceAllUText(URegularExpression *regexp, + UText *replacement, + UText *dest, + UErrorCode *status); + +/** + * Replaces the first substring of the input that matches the pattern + * with the given replacement string. This is a convenience function that + * provides a complete find-and-replace operation. + * + * This method scans the input string looking for a match of the pattern. + * All input that is not part of the match is copied unchanged to the + * destination buffer. The matched region is replaced in the output + * buffer by the replacement string. The replacement string may contain + * references to capture groups; these take the form of $1, $2, etc. + * + * @param regexp The compiled regular expression. + * @param replacementText A string containing the replacement text. + * @param replacementLength The length of the replacement string, or + * -1 if it is NUL terminated. + * @param destBuf A (UChar *) buffer that will receive the result. + * @param destCapacity The capacity of the destination buffer. + * @param status a reference to a UErrorCode to receive any errors. + * @return The length of the string resulting from the find + * and replace operation. In the event that the + * destination capacity is inadequate, the return value + * is still the full length of the untruncated string. + * @stable ICU 3.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_replaceFirst(URegularExpression *regexp, + const UChar *replacementText, + int32_t replacementLength, + UChar *destBuf, + int32_t destCapacity, + UErrorCode *status); + +/** + * Replaces the first substring of the input that matches the pattern + * with the given replacement string. This is a convenience function that + * provides a complete find-and-replace operation. + * + * This method scans the input string looking for a match of the pattern. + * All input that is not part of the match is copied unchanged to the + * destination buffer. The matched region is replaced in the output + * buffer by the replacement string. The replacement string may contain + * references to capture groups; these take the form of $1, $2, etc. + * + * @param regexp The compiled regular expression. + * @param replacement A string containing the replacement text. + * @param dest A mutable UText that will receive the result. + * If NULL, a new UText will be created (which may not be mutable). + * @param status A reference to a UErrorCode to receive any errors. + * @return A UText containing the results of the find and replace. + * If a pre-allocated UText was provided, it will always be used and returned. + * + * @stable ICU 4.6 + */ +U_STABLE UText * U_EXPORT2 +uregex_replaceFirstUText(URegularExpression *regexp, + UText *replacement, + UText *dest, + UErrorCode *status); + +/** + * Implements a replace operation intended to be used as part of an + * incremental find-and-replace. + * + * <p>The input string, starting from the end of the previous match and ending at + * the start of the current match, is appended to the destination string. Then the + * replacement string is appended to the output string, + * including handling any substitutions of captured text.</p> + * + * <p>A note on preflight computation of buffersize and error handling: + * Calls to uregex_appendReplacement() and uregex_appendTail() are + * designed to be chained, one after another, with the destination + * buffer pointer and buffer capacity updated after each in preparation + * to for the next. If the destination buffer is exhausted partway through such a + * sequence, a U_BUFFER_OVERFLOW_ERROR status will be returned. Normal + * ICU conventions are for a function to perform no action if it is + * called with an error status, but for this one case, uregex_appendRepacement() + * will operate normally so that buffer size computations will complete + * correctly. + * + * <p>For simple, prepackaged, non-incremental find-and-replace + * operations, see replaceFirst() or replaceAll().</p> + * + * @param regexp The regular expression object. + * @param replacementText The string that will replace the matched portion of the + * input string as it is copied to the destination buffer. + * The replacement text may contain references ($1, for + * example) to capture groups from the match. + * @param replacementLength The length of the replacement text string, + * or -1 if the string is NUL terminated. + * @param destBuf The buffer into which the results of the + * find-and-replace are placed. On return, this pointer + * will be updated to refer to the beginning of the + * unused portion of buffer, leaving it in position for + * a subsequent call to this function. + * @param destCapacity The size of the output buffer, On return, this + * parameter will be updated to reflect the space remaining + * unused in the output buffer. + * @param status A reference to a UErrorCode to receive any errors. + * @return The length of the result string. In the event that + * destCapacity is inadequate, the full length of the + * untruncated output string is returned. + * + * @stable ICU 3.0 + * + */ +U_STABLE int32_t U_EXPORT2 +uregex_appendReplacement(URegularExpression *regexp, + const UChar *replacementText, + int32_t replacementLength, + UChar **destBuf, + int32_t *destCapacity, + UErrorCode *status); + +/** + * Implements a replace operation intended to be used as part of an + * incremental find-and-replace. + * + * <p>The input string, starting from the end of the previous match and ending at + * the start of the current match, is appended to the destination string. Then the + * replacement string is appended to the output string, + * including handling any substitutions of captured text.</p> + * + * <p>For simple, prepackaged, non-incremental find-and-replace + * operations, see replaceFirst() or replaceAll().</p> + * + * @param regexp The regular expression object. + * @param replacementText The string that will replace the matched portion of the + * input string as it is copied to the destination buffer. + * The replacement text may contain references ($1, for + * example) to capture groups from the match. + * @param dest A mutable UText that will receive the result. Must not be NULL. + * @param status A reference to a UErrorCode to receive any errors. + * + * @stable ICU 4.6 + */ +U_STABLE void U_EXPORT2 +uregex_appendReplacementUText(URegularExpression *regexp, + UText *replacementText, + UText *dest, + UErrorCode *status); + +/** + * As the final step in a find-and-replace operation, append the remainder + * of the input string, starting at the position following the last match, + * to the destination string. <code>uregex_appendTail()</code> is intended + * to be invoked after one or more invocations of the + * <code>uregex_appendReplacement()</code> function. + * + * @param regexp The regular expression object. This is needed to + * obtain the input string and with the position + * of the last match within it. + * @param destBuf The buffer in which the results of the + * find-and-replace are placed. On return, the pointer + * will be updated to refer to the beginning of the + * unused portion of buffer. + * @param destCapacity The size of the output buffer, On return, this + * value will be updated to reflect the space remaining + * unused in the output buffer. + * @param status A reference to a UErrorCode to receive any errors. + * @return The length of the result string. In the event that + * destCapacity is inadequate, the full length of the + * untruncated output string is returned. + * + * @stable ICU 3.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_appendTail(URegularExpression *regexp, + UChar **destBuf, + int32_t *destCapacity, + UErrorCode *status); + +/** + * As the final step in a find-and-replace operation, append the remainder + * of the input string, starting at the position following the last match, + * to the destination string. <code>uregex_appendTailUText()</code> is intended + * to be invoked after one or more invocations of the + * <code>uregex_appendReplacementUText()</code> function. + * + * @param regexp The regular expression object. This is needed to + * obtain the input string and with the position + * of the last match within it. + * @param dest A mutable UText that will receive the result. Must not be NULL. + * + * @param status Error code + * + * @return The destination UText. + * + * @stable ICU 4.6 + */ +U_STABLE UText * U_EXPORT2 +uregex_appendTailUText(URegularExpression *regexp, + UText *dest, + UErrorCode *status); + + /** + * Split a string into fields. Somewhat like split() from Perl. + * The pattern matches identify delimiters that separate the input + * into fields. The input data between the matches becomes the + * fields themselves. + * + * Each of the fields is copied from the input string to the destination + * buffer, and NUL terminated. The position of each field within + * the destination buffer is returned in the destFields array. + * + * If the delimiter pattern includes capture groups, the captured text will + * also appear in the destination array of output strings, interspersed + * with the fields. This is similar to Perl, but differs from Java, + * which ignores the presence of capture groups in the pattern. + * + * Trailing empty fields will always be returned, assuming sufficient + * destination capacity. This differs from the default behavior for Java + * and Perl where trailing empty fields are not returned. + * + * The number of strings produced by the split operation is returned. + * This count includes the strings from capture groups in the delimiter pattern. + * This behavior differs from Java, which ignores capture groups. + * + * @param regexp The compiled regular expression. + * @param destBuf A (UChar *) buffer to receive the fields that + * are extracted from the input string. These + * field pointers will refer to positions within the + * destination buffer supplied by the caller. Any + * extra positions within the destFields array will be + * set to NULL. + * @param destCapacity The capacity of the destBuf. + * @param requiredCapacity The actual capacity required of the destBuf. + * If destCapacity is too small, requiredCapacity will return + * the total capacity required to hold all of the output, and + * a U_BUFFER_OVERFLOW_ERROR will be returned. + * @param destFields An array to be filled with the position of each + * of the extracted fields within destBuf. + * @param destFieldsCapacity The number of elements in the destFields array. + * If the number of fields found is less than destFieldsCapacity, + * the extra destFields elements are set to zero. + * If destFieldsCapacity is too small, the trailing part of the + * input, including any field delimiters, is treated as if it + * were the last field - it is copied to the destBuf, and + * its position is in the destBuf is stored in the last element + * of destFields. This behavior mimics that of Perl. It is not + * an error condition, and no error status is returned when all destField + * positions are used. + * @param status A reference to a UErrorCode to receive any errors. + * @return The number of fields into which the input string was split. + * @stable ICU 3.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_split( URegularExpression *regexp, + UChar *destBuf, + int32_t destCapacity, + int32_t *requiredCapacity, + UChar *destFields[], + int32_t destFieldsCapacity, + UErrorCode *status); + + /** + * Split a string into fields. Somewhat like split() from Perl. + * The pattern matches identify delimiters that separate the input + * into fields. The input data between the matches becomes the + * fields themselves. + * <p> + * The behavior of this function is not very closely aligned with uregex_split(); + * instead, it is based on (and implemented directly on top of) the C++ split method. + * + * @param regexp The compiled regular expression. + * @param destFields An array of mutable UText structs to receive the results of the split. + * If a field is NULL, a new UText is allocated to contain the results for + * that field. This new UText is not guaranteed to be mutable. + * @param destFieldsCapacity The number of elements in the destination array. + * If the number of fields found is less than destCapacity, the + * extra strings in the destination array are not altered. + * If the number of destination strings is less than the number + * of fields, the trailing part of the input string, including any + * field delimiters, is placed in the last destination string. + * This behavior mimics that of Perl. It is not an error condition, and no + * error status is returned when all destField positions are used. + * @param status A reference to a UErrorCode to receive any errors. + * @return The number of fields into which the input string was split. + * + * @stable ICU 4.6 + */ +U_STABLE int32_t U_EXPORT2 +uregex_splitUText(URegularExpression *regexp, + UText *destFields[], + int32_t destFieldsCapacity, + UErrorCode *status); + +/** + * Set a processing time limit for match operations with this URegularExpression. + * + * Some patterns, when matching certain strings, can run in exponential time. + * For practical purposes, the match operation may appear to be in an + * infinite loop. + * When a limit is set a match operation will fail with an error if the + * limit is exceeded. + * <p> + * The units of the limit are steps of the match engine. + * Correspondence with actual processor time will depend on the speed + * of the processor and the details of the specific pattern, but will + * typically be on the order of milliseconds. + * <p> + * By default, the matching time is not limited. + * <p> + * + * @param regexp The compiled regular expression. + * @param limit The limit value, or 0 for no limit. + * @param status A reference to a UErrorCode to receive any errors. + * @stable ICU 4.0 + */ +U_STABLE void U_EXPORT2 +uregex_setTimeLimit(URegularExpression *regexp, + int32_t limit, + UErrorCode *status); + +/** + * Get the time limit for for matches with this URegularExpression. + * A return value of zero indicates that there is no limit. + * + * @param regexp The compiled regular expression. + * @param status A reference to a UErrorCode to receive any errors. + * @return the maximum allowed time for a match, in units of processing steps. + * @stable ICU 4.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_getTimeLimit(const URegularExpression *regexp, + UErrorCode *status); + +/** + * Set the amount of heap storage available for use by the match backtracking stack. + * <p> + * ICU uses a backtracking regular expression engine, with the backtrack stack + * maintained on the heap. This function sets the limit to the amount of memory + * that can be used for this purpose. A backtracking stack overflow will + * result in an error from the match operation that caused it. + * <p> + * A limit is desirable because a malicious or poorly designed pattern can use + * excessive memory, potentially crashing the process. A limit is enabled + * by default. + * <p> + * @param regexp The compiled regular expression. + * @param limit The maximum size, in bytes, of the matching backtrack stack. + * A value of zero means no limit. + * The limit must be greater than or equal to zero. + * @param status A reference to a UErrorCode to receive any errors. + * + * @stable ICU 4.0 + */ +U_STABLE void U_EXPORT2 +uregex_setStackLimit(URegularExpression *regexp, + int32_t limit, + UErrorCode *status); + +/** + * Get the size of the heap storage available for use by the back tracking stack. + * + * @return the maximum backtracking stack size, in bytes, or zero if the + * stack size is unlimited. + * @stable ICU 4.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_getStackLimit(const URegularExpression *regexp, + UErrorCode *status); + + +/** + * Function pointer for a regular expression matching callback function. + * When set, a callback function will be called periodically during matching + * operations. If the call back function returns FALSE, the matching + * operation will be terminated early. + * + * Note: the callback function must not call other functions on this + * URegularExpression. + * + * @param context context pointer. The callback function will be invoked + * with the context specified at the time that + * uregex_setMatchCallback() is called. + * @param steps the accumulated processing time, in match steps, + * for this matching operation. + * @return TRUE to continue the matching operation. + * FALSE to terminate the matching operation. + * @stable ICU 4.0 + */ +U_CDECL_BEGIN +typedef UBool U_CALLCONV URegexMatchCallback ( + const void *context, + int32_t steps); +U_CDECL_END + +/** + * Set a callback function for this URegularExpression. + * During matching operations the function will be called periodically, + * giving the application the opportunity to terminate a long-running + * match. + * + * @param regexp The compiled regular expression. + * @param callback A pointer to the user-supplied callback function. + * @param context User context pointer. The value supplied at the + * time the callback function is set will be saved + * and passed to the callback each time that it is called. + * @param status A reference to a UErrorCode to receive any errors. + * @stable ICU 4.0 + */ +U_STABLE void U_EXPORT2 +uregex_setMatchCallback(URegularExpression *regexp, + URegexMatchCallback *callback, + const void *context, + UErrorCode *status); + + +/** + * Get the callback function for this URegularExpression. + * + * @param regexp The compiled regular expression. + * @param callback Out parameter, receives a pointer to the user-supplied + * callback function. + * @param context Out parameter, receives the user context pointer that + * was set when uregex_setMatchCallback() was called. + * @param status A reference to a UErrorCode to receive any errors. + * @stable ICU 4.0 + */ +U_STABLE void U_EXPORT2 +uregex_getMatchCallback(const URegularExpression *regexp, + URegexMatchCallback **callback, + const void **context, + UErrorCode *status); + +/** + * Function pointer for a regular expression find callback function. + * + * When set, a callback function will be called during a find operation + * and for operations that depend on find, such as findNext, split and some replace + * operations like replaceFirst. + * The callback will usually be called after each attempt at a match, but this is not a + * guarantee that the callback will be invoked at each character. For finds where the + * match engine is invoked at each character, this may be close to true, but less likely + * for more optimized loops where the pattern is known to only start, and the match + * engine invoked, at certain characters. + * When invoked, this callback will specify the index at which a match operation is about + * to be attempted, giving the application the opportunity to terminate a long-running + * find operation. + * + * If the call back function returns FALSE, the find operation will be terminated early. + * + * Note: the callback function must not call other functions on this + * URegularExpression + * + * @param context context pointer. The callback function will be invoked + * with the context specified at the time that + * uregex_setFindProgressCallback() is called. + * @param matchIndex the next index at which a match attempt will be attempted for this + * find operation. If this callback interrupts the search, this is the + * index at which a find/findNext operation may be re-initiated. + * @return TRUE to continue the matching operation. + * FALSE to terminate the matching operation. + * @stable ICU 4.6 + */ +U_CDECL_BEGIN +typedef UBool U_CALLCONV URegexFindProgressCallback ( + const void *context, + int64_t matchIndex); +U_CDECL_END + + +/** + * Set the find progress callback function for this URegularExpression. + * + * @param regexp The compiled regular expression. + * @param callback A pointer to the user-supplied callback function. + * @param context User context pointer. The value supplied at the + * time the callback function is set will be saved + * and passed to the callback each time that it is called. + * @param status A reference to a UErrorCode to receive any errors. + * @stable ICU 4.6 + */ +U_STABLE void U_EXPORT2 +uregex_setFindProgressCallback(URegularExpression *regexp, + URegexFindProgressCallback *callback, + const void *context, + UErrorCode *status); + +/** + * Get the find progress callback function for this URegularExpression. + * + * @param regexp The compiled regular expression. + * @param callback Out parameter, receives a pointer to the user-supplied + * callback function. + * @param context Out parameter, receives the user context pointer that + * was set when uregex_setFindProgressCallback() was called. + * @param status A reference to a UErrorCode to receive any errors. + * @stable ICU 4.6 + */ +U_STABLE void U_EXPORT2 +uregex_getFindProgressCallback(const URegularExpression *regexp, + URegexFindProgressCallback **callback, + const void **context, + UErrorCode *status); + +#endif /* !UCONFIG_NO_REGULAR_EXPRESSIONS */ +#endif /* UREGEX_H */ |