enable x64 windows build

use "vcbuild x64" to do x64 build of node.exe

3 files changed, 544 insertions, 277 deletions

diff --git a/deps/openssl/config/k8/openssl/opensslconf-posix.h b/deps/openssl/config/k8/openssl/opensslconf-posix.h
new file mode 100644
index 0000000000..f47e7b6174
--- /dev/null
+++ b/deps/openssl/config/k8/openssl/opensslconf-posix.h
@@ -0,0 +1,278 @@
+/* opensslconf.h */
+/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
+
+/* OpenSSL was configured with the following options: */
+#ifndef OPENSSL_DOING_MAKEDEPEND
+
+
+#ifndef OPENSSL_NO_CAMELLIA
+# define OPENSSL_NO_CAMELLIA
+#endif
+#ifndef OPENSSL_NO_CAPIENG
+# define OPENSSL_NO_CAPIENG
+#endif
+#ifndef OPENSSL_NO_CMS
+# define OPENSSL_NO_CMS
+#endif
+#ifndef OPENSSL_NO_FIPS
+# define OPENSSL_NO_FIPS
+#endif
+#ifndef OPENSSL_NO_GMP
+# define OPENSSL_NO_GMP
+#endif
+#ifndef OPENSSL_NO_IDEA
+# define OPENSSL_NO_IDEA
+#endif
+#ifndef OPENSSL_NO_JPAKE
+# define OPENSSL_NO_JPAKE
+#endif
+#ifndef OPENSSL_NO_KRB5
+# define OPENSSL_NO_KRB5
+#endif
+#ifndef OPENSSL_NO_MDC2
+# define OPENSSL_NO_MDC2
+#endif
+#ifndef OPENSSL_NO_RC5
+# define OPENSSL_NO_RC5
+#endif
+#ifndef OPENSSL_NO_RFC3779
+# define OPENSSL_NO_RFC3779
+#endif
+#ifndef OPENSSL_NO_SEED
+# define OPENSSL_NO_SEED
+#endif
+#ifndef OPENSSL_NO_ASM
+# define OPENSSL_NO_ASM
+#endif
+
+#endif /* OPENSSL_DOING_MAKEDEPEND */
+
+#ifndef OPENSSL_THREADS
+# define OPENSSL_THREADS
+#endif
+#ifndef OPENSSL_NO_DYNAMIC_ENGINE
+# define OPENSSL_NO_DYNAMIC_ENGINE
+#endif
+
+/* The OPENSSL_NO_* macros are also defined as NO_* if the application
+   asks for it.  This is a transient feature that is provided for those
+   who haven't had the time to do the appropriate changes in their
+   applications.  */
+#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_CAMELLIA) && !defined(NO_CAMELLIA)
+#  define NO_CAMELLIA
+# endif
+# if defined(OPENSSL_NO_CAPIENG) && !defined(NO_CAPIENG)
+#  define NO_CAPIENG
+# endif
+# if defined(OPENSSL_NO_CMS) && !defined(NO_CMS)
+#  define NO_CMS
+# endif
+# if defined(OPENSSL_NO_FIPS) && !defined(NO_FIPS)
+#  define NO_FIPS
+# endif
+# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP)
+#  define NO_GMP
+# endif
+# if defined(OPENSSL_NO_IDEA) && !defined(NO_IDEA)
+#  define NO_IDEA
+# endif
+# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE)
+#  define NO_JPAKE
+# endif
+# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
+#  define NO_KRB5
+# endif
+# if defined(OPENSSL_NO_MDC2) && !defined(NO_MDC2)
+#  define NO_MDC2
+# endif
+# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
+#  define NO_RC5
+# endif
+# if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779)
+#  define NO_RFC3779
+# endif
+# if defined(OPENSSL_NO_SEED) && !defined(NO_SEED)
+#  define NO_SEED
+# endif
+#endif
+
+#define OPENSSL_CPUID_OBJ
+
+/* crypto/opensslconf.h.in */
+
+#ifdef OPENSSL_DOING_MAKEDEPEND
+
+/* Include any symbols here that have to be explicitly set to enable a feature
+ * that should be visible to makedepend.
+ *
+ * [Our "make depend" doesn't actually look at this, we use actual build settings
+ * instead; we want to make it easy to remove subdirectories with disabled algorithms.]
+ */
+
+#ifndef OPENSSL_FIPS
+#define OPENSSL_FIPS
+#endif
+
+#endif
+
+/* Generate 80386 code? */
+#undef I386_ONLY
+
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define ENGINESDIR "/usr/local/ssl/lib/engines"
+#define OPENSSLDIR "/usr/local/ssl"
+#endif
+#endif
+
+#undef OPENSSL_UNISTD
+#define OPENSSL_UNISTD <unistd.h>
+#if !defined(SWIG)
+#include <unistd.h>
+#endif
+
+#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
+
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned int
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#define RC4_CHUNK unsigned long
+#endif
+#endif
+
+#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned int
+#endif
+#endif
+
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#undef BN_LLONG
+
+/* Should we define BN_DIV2W here? */
+
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#define SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#undef THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#undef RC4_INDEX
+#endif
+
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#undef BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#undef DES_PTR
+#endif
+
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#undef DES_RISC1
+#endif
+
+#ifndef DES_RISC2
+#undef DES_RISC2
+#endif
+
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#define DES_UNROLL
+#endif
+
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+ 
+#if defined( sun )		/* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )	/* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )	/* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )		/* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )		/* HP-PA */
+  /* Unknown */
+#elif defined( __aux )		/* 68K */
+  /* Unknown */
+#elif defined( __dgux )		/* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )		/* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined(i386) || defined(__i386__)	/* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */
diff --git a/deps/openssl/config/k8/openssl/opensslconf-win32.h b/deps/openssl/config/k8/openssl/opensslconf-win32.h
new file mode 100644
index 0000000000..c57a235ed4
--- /dev/null
+++ b/deps/openssl/config/k8/openssl/opensslconf-win32.h
@@ -0,0 +1,262 @@
+/* opensslconf.h */
+/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
+
+/* OpenSSL was configured with the following options: */
+#ifndef OPENSSL_SYSNAME_WIN32
+# define OPENSSL_SYSNAME_WIN32
+#endif
+#ifndef OPENSSL_DOING_MAKEDEPEND
+
+
+#ifndef OPENSSL_NO_CAMELLIA
+# define OPENSSL_NO_CAMELLIA
+#endif
+#ifndef OPENSSL_NO_CAPIENG
+# define OPENSSL_NO_CAPIENG
+#endif
+#ifndef OPENSSL_NO_CMS
+# define OPENSSL_NO_CMS
+#endif
+#ifndef OPENSSL_NO_GMP
+# define OPENSSL_NO_GMP
+#endif
+#ifndef OPENSSL_NO_IDEA
+# define OPENSSL_NO_IDEA
+#endif
+#ifndef OPENSSL_NO_JPAKE
+# define OPENSSL_NO_JPAKE
+#endif
+#ifndef OPENSSL_NO_KRB5
+# define OPENSSL_NO_KRB5
+#endif
+#ifndef OPENSSL_NO_MDC2
+# define OPENSSL_NO_MDC2
+#endif
+#ifndef OPENSSL_NO_RC5
+# define OPENSSL_NO_RC5
+#endif
+#ifndef OPENSSL_NO_RFC3779
+# define OPENSSL_NO_RFC3779
+#endif
+#ifndef OPENSSL_NO_SEED
+# define OPENSSL_NO_SEED
+#endif
+
+#endif /* OPENSSL_DOING_MAKEDEPEND */
+
+#ifndef OPENSSL_THREADS
+# define OPENSSL_THREADS
+#endif
+
+/* The OPENSSL_NO_* macros are also defined as NO_* if the application
+   asks for it.  This is a transient feature that is provided for those
+   who haven't had the time to do the appropriate changes in their
+   applications.  */
+#ifdef OPENSSL_ALGORITHM_DEFINES
+# if defined(OPENSSL_NO_CAMELLIA) && !defined(NO_CAMELLIA)
+#  define NO_CAMELLIA
+# endif
+# if defined(OPENSSL_NO_CAPIENG) && !defined(NO_CAPIENG)
+#  define NO_CAPIENG
+# endif
+# if defined(OPENSSL_NO_CMS) && !defined(NO_CMS)
+#  define NO_CMS
+# endif
+# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP)
+#  define NO_GMP
+# endif
+# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE)
+#  define NO_JPAKE
+# endif
+# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
+#  define NO_KRB5
+# endif
+# if defined(OPENSSL_NO_MDC2) && !defined(NO_MDC2)
+#  define NO_MDC2
+# endif
+# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
+#  define NO_RC5
+# endif
+# if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779)
+#  define NO_RFC3779
+# endif
+# if defined(OPENSSL_NO_SEED) && !defined(NO_SEED)
+#  define NO_SEED
+# endif
+#endif
+
+/* crypto/opensslconf.h.in */
+
+#ifdef OPENSSL_DOING_MAKEDEPEND
+
+/* Include any symbols here that have to be explicitly set to enable a feature
+ * that should be visible to makedepend.
+ *
+ * [Our "make depend" doesn't actually look at this, we use actual build settings
+ * instead; we want to make it easy to remove subdirectories with disabled algorithms.]
+ */
+
+#ifndef OPENSSL_FIPS
+#define OPENSSL_FIPS
+#endif
+
+#endif
+
+/* Generate 80386 code? */
+#undef I386_ONLY
+
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#define ENGINESDIR "ssl/lib/engines"
+#define OPENSSLDIR "ssl"
+#endif
+#endif
+
+#undef OPENSSL_UNISTD
+#define OPENSSL_UNISTD <unistd.h>
+
+#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
+#define OPENSSL_EXPORT_VAR_AS_FUNCTION
+
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC4_H)
+#if !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+/*
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#define RC4_INT unsigned int
+#endif
+#if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#define RC4_CHUNK unsigned long long
+#endif
+#endif
+
+#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned int
+#endif
+#endif
+
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#undef BN_LLONG
+
+/* Should we define BN_DIV2W here? */
+
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#undef SIXTY_FOUR_BIT_LONG
+#define SIXTY_FOUR_BIT
+#undef THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#undef RC4_INDEX
+#endif
+
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+#undef BF_PTR
+#endif /* HEADER_BF_LOCL_H */
+
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#undef DES_PTR
+#endif
+
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#undef DES_RISC1
+#endif
+
+#ifndef DES_RISC2
+#undef DES_RISC2
+#endif
+
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#undef DES_UNROLL
+#endif
+
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+ 
+#if defined( sun )		/* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )	/* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )	/* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )		/* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )		/* HP-PA */
+  /* Unknown */
+#elif defined( __aux )		/* 68K */
+  /* Unknown */
+#elif defined( __dgux )		/* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )		/* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined(i386) || defined(__i386__)	/* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */
diff --git a/deps/openssl/config/k8/openssl/opensslconf.h b/deps/openssl/config/k8/openssl/opensslconf.h
index f47e7b6174..0ea58de1bc 100644
--- a/deps/openssl/config/k8/openssl/opensslconf.h
+++ b/deps/openssl/config/k8/openssl/opensslconf.h
@@ -1,278 +1,5 @@
-/* opensslconf.h */
-/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
-
-/* OpenSSL was configured with the following options: */
-#ifndef OPENSSL_DOING_MAKEDEPEND
-
-
-#ifndef OPENSSL_NO_CAMELLIA
-# define OPENSSL_NO_CAMELLIA
+#ifdef WIN32
+#include "opensslconf-win32.h"
+#else
+#include "opensslconf-posix.h"
 #endif
-#ifndef OPENSSL_NO_CAPIENG
-# define OPENSSL_NO_CAPIENG
-#endif
-#ifndef OPENSSL_NO_CMS
-# define OPENSSL_NO_CMS
-#endif
-#ifndef OPENSSL_NO_FIPS
-# define OPENSSL_NO_FIPS
-#endif
-#ifndef OPENSSL_NO_GMP
-# define OPENSSL_NO_GMP
-#endif
-#ifndef OPENSSL_NO_IDEA
-# define OPENSSL_NO_IDEA
-#endif
-#ifndef OPENSSL_NO_JPAKE
-# define OPENSSL_NO_JPAKE
-#endif
-#ifndef OPENSSL_NO_KRB5
-# define OPENSSL_NO_KRB5
-#endif
-#ifndef OPENSSL_NO_MDC2
-# define OPENSSL_NO_MDC2
-#endif
-#ifndef OPENSSL_NO_RC5
-# define OPENSSL_NO_RC5
-#endif
-#ifndef OPENSSL_NO_RFC3779
-# define OPENSSL_NO_RFC3779
-#endif
-#ifndef OPENSSL_NO_SEED
-# define OPENSSL_NO_SEED
-#endif
-#ifndef OPENSSL_NO_ASM
-# define OPENSSL_NO_ASM
-#endif
-
-#endif /* OPENSSL_DOING_MAKEDEPEND */
-
-#ifndef OPENSSL_THREADS
-# define OPENSSL_THREADS
-#endif
-#ifndef OPENSSL_NO_DYNAMIC_ENGINE
-# define OPENSSL_NO_DYNAMIC_ENGINE
-#endif
-
-/* The OPENSSL_NO_* macros are also defined as NO_* if the application
-   asks for it.  This is a transient feature that is provided for those
-   who haven't had the time to do the appropriate changes in their
-   applications.  */
-#ifdef OPENSSL_ALGORITHM_DEFINES
-# if defined(OPENSSL_NO_CAMELLIA) && !defined(NO_CAMELLIA)
-#  define NO_CAMELLIA
-# endif
-# if defined(OPENSSL_NO_CAPIENG) && !defined(NO_CAPIENG)
-#  define NO_CAPIENG
-# endif
-# if defined(OPENSSL_NO_CMS) && !defined(NO_CMS)
-#  define NO_CMS
-# endif
-# if defined(OPENSSL_NO_FIPS) && !defined(NO_FIPS)
-#  define NO_FIPS
-# endif
-# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP)
-#  define NO_GMP
-# endif
-# if defined(OPENSSL_NO_IDEA) && !defined(NO_IDEA)
-#  define NO_IDEA
-# endif
-# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE)
-#  define NO_JPAKE
-# endif
-# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
-#  define NO_KRB5
-# endif
-# if defined(OPENSSL_NO_MDC2) && !defined(NO_MDC2)
-#  define NO_MDC2
-# endif
-# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
-#  define NO_RC5
-# endif
-# if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779)
-#  define NO_RFC3779
-# endif
-# if defined(OPENSSL_NO_SEED) && !defined(NO_SEED)
-#  define NO_SEED
-# endif
-#endif
-
-#define OPENSSL_CPUID_OBJ
-
-/* crypto/opensslconf.h.in */
-
-#ifdef OPENSSL_DOING_MAKEDEPEND
-
-/* Include any symbols here that have to be explicitly set to enable a feature
- * that should be visible to makedepend.
- *
- * [Our "make depend" doesn't actually look at this, we use actual build settings
- * instead; we want to make it easy to remove subdirectories with disabled algorithms.]
- */
-
-#ifndef OPENSSL_FIPS
-#define OPENSSL_FIPS
-#endif
-
-#endif
-
-/* Generate 80386 code? */
-#undef I386_ONLY
-
-#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
-#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
-#define ENGINESDIR "/usr/local/ssl/lib/engines"
-#define OPENSSLDIR "/usr/local/ssl"
-#endif
-#endif
-
-#undef OPENSSL_UNISTD
-#define OPENSSL_UNISTD <unistd.h>
-#if !defined(SWIG)
-#include <unistd.h>
-#endif
-
-#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
-
-#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
-#define IDEA_INT unsigned int
-#endif
-
-#if defined(HEADER_MD2_H) && !defined(MD2_INT)
-#define MD2_INT unsigned int
-#endif
-
-#if defined(HEADER_RC2_H) && !defined(RC2_INT)
-/* I need to put in a mod for the alpha - eay */
-#define RC2_INT unsigned int
-#endif
-
-#if defined(HEADER_RC4_H)
-#if !defined(RC4_INT)
-/* using int types make the structure larger but make the code faster
- * on most boxes I have tested - up to %20 faster. */
-/*
- * I don't know what does "most" mean, but declaring "int" is a must on:
- * - Intel P6 because partial register stalls are very expensive;
- * - elder Alpha because it lacks byte load/store instructions;
- */
-#define RC4_INT unsigned int
-#endif
-#if !defined(RC4_CHUNK)
-/*
- * This enables code handling data aligned at natural CPU word
- * boundary. See crypto/rc4/rc4_enc.c for further details.
- */
-#define RC4_CHUNK unsigned long
-#endif
-#endif
-
-#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG)
-/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
- * %20 speed up (longs are 8 bytes, int's are 4). */
-#ifndef DES_LONG
-#define DES_LONG unsigned int
-#endif
-#endif
-
-#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
-#define CONFIG_HEADER_BN_H
-#undef BN_LLONG
-
-/* Should we define BN_DIV2W here? */
-
-/* Only one for the following should be defined */
-/* The prime number generation stuff may not work when
- * EIGHT_BIT but I don't care since I've only used this mode
- * for debuging the bignum libraries */
-#define SIXTY_FOUR_BIT_LONG
-#undef SIXTY_FOUR_BIT
-#undef THIRTY_TWO_BIT
-#undef SIXTEEN_BIT
-#undef EIGHT_BIT
-#endif
-
-#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
-#define CONFIG_HEADER_RC4_LOCL_H
-/* if this is defined data[i] is used instead of *data, this is a %20
- * speedup on x86 */
-#undef RC4_INDEX
-#endif
-
-#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
-#define CONFIG_HEADER_BF_LOCL_H
-#undef BF_PTR
-#endif /* HEADER_BF_LOCL_H */
-
-#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
-#define CONFIG_HEADER_DES_LOCL_H
-#ifndef DES_DEFAULT_OPTIONS
-/* the following is tweaked from a config script, that is why it is a
- * protected undef/define */
-#ifndef DES_PTR
-#undef DES_PTR
-#endif
-
-/* This helps C compiler generate the correct code for multiple functional
- * units.  It reduces register dependancies at the expense of 2 more
- * registers */
-#ifndef DES_RISC1
-#undef DES_RISC1
-#endif
-
-#ifndef DES_RISC2
-#undef DES_RISC2
-#endif
-
-#if defined(DES_RISC1) && defined(DES_RISC2)
-YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
-#endif
-
-/* Unroll the inner loop, this sometimes helps, sometimes hinders.
- * Very mucy CPU dependant */
-#ifndef DES_UNROLL
-#define DES_UNROLL
-#endif
-
-/* These default values were supplied by
- * Peter Gutman <pgut001@cs.auckland.ac.nz>
- * They are only used if nothing else has been defined */
-#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
-/* Special defines which change the way the code is built depending on the
-   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
-   even newer MIPS CPU's, but at the moment one size fits all for
-   optimization options.  Older Sparc's work better with only UNROLL, but
-   there's no way to tell at compile time what it is you're running on */
- 
-#if defined( sun )		/* Newer Sparc's */
-#  define DES_PTR
-#  define DES_RISC1
-#  define DES_UNROLL
-#elif defined( __ultrix )	/* Older MIPS */
-#  define DES_PTR
-#  define DES_RISC2
-#  define DES_UNROLL
-#elif defined( __osf1__ )	/* Alpha */
-#  define DES_PTR
-#  define DES_RISC2
-#elif defined ( _AIX )		/* RS6000 */
-  /* Unknown */
-#elif defined( __hpux )		/* HP-PA */
-  /* Unknown */
-#elif defined( __aux )		/* 68K */
-  /* Unknown */
-#elif defined( __dgux )		/* 88K (but P6 in latest boxes) */
-#  define DES_UNROLL
-#elif defined( __sgi )		/* Newer MIPS */
-#  define DES_PTR
-#  define DES_RISC2
-#  define DES_UNROLL
-#elif defined(i386) || defined(__i386__)	/* x86 boxes, should be gcc */
-#  define DES_PTR
-#  define DES_RISC1
-#  define DES_UNROLL
-#endif /* Systems-specific speed defines */
-#endif
-
-#endif /* DES_DEFAULT_OPTIONS */
-#endif /* HEADER_DES_LOCL_H */