build: add OpenSSL-1.1.0 support

- For Windows, nasm is new build requirements and openssl_no_asm is
  set to 1 with warning if it is not installed.
- For use of openssl assemble codes, either gas_version >= 2.23,
  xcode_version >= 5.0 ,llvm_version >= 3.3 or nasm_version >= 2.10 is
  needed. Otherwise, openssl_no_asm is set to 1 with warning.
- FIPS is not supported in OpenSSL-1.1.0 so that it leads an error
  when openssl_fips options is enabled in configure.

Fixes: https://github.com/nodejs/node/issues/4270
PR-URL: https://github.com/nodejs/node/pull/19794
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>

4 files changed, 68 insertions, 61 deletions

diff --git a/BUILDING.md b/BUILDING.md
index e3bd7a7e9d..19b227af40 100644
--- a/BUILDING.md
+++ b/BUILDING.md
@@ -88,6 +88,23 @@ Depending on host platform, the selection of toolchains may vary.
 
 * Visual Studio 2017 or the Build Tools thereof
 
+#### OpenSSL asm support
+
+OpenSSL-1.1.0 requires the following asssembler version for use of asm
+support.
+
+* gas (GNU assembler) version 2.23 or higher
+* xcode version 5.0 or higher
+* llvm version 3.3 or higher
+* nasm version 2.10 or higher in Windows
+
+Otherwise, `--openssl-no-asm` is added with warning in configure.
+
+*Note:* The forthcoming OpenSSL-1.1.1 will require higher
+ version. Please refer
+ https://www.openssl.org/docs/man1.1.1/man3/OPENSSL_ia32cap.html for
+ details.
+
 ## Building Node.js on supported platforms
 
 *Note:* All prerequisites can be easily installed by following
@@ -377,44 +394,7 @@ as `deps/icu` (You'll have: `deps/icu/source/...`)
 
 ## Building Node.js with FIPS-compliant OpenSSL
 
-It is possible to build Node.js with the
-[OpenSSL FIPS module](https://www.openssl.org/docs/fipsnotes.html) on POSIX
-systems. Windows is not supported.
-
-Building in this way does not mean the runtime is FIPS 140-2 validated, but
-rather that the runtime uses a validated module. In addition, the validation for
-the underlying module is only valid if it is deployed in accordance with its
-[security policy](http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140sp/140sp1747.pdf).
-If you need FIPS validated cryptography it is recommended that you read both
-the [security policy](http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140sp/140sp1747.pdf)
-and [user guide](https://openssl.org/docs/fips/UserGuide-2.0.pdf).
-
-### Instructions
-
-1. Obtain a copy of openssl-fips-x.x.x.tar.gz.
-   To comply with the security policy you must ensure the path
-   through which you get the file complies with the requirements
-   for a "secure installation" as described in section 6.6 in
-   the [user guide](https://openssl.org/docs/fips/UserGuide-2.0.pdf).
-   For evaluation/experimentation, you can simply download and verify
-   `openssl-fips-x.x.x.tar.gz` from https://www.openssl.org/source/
-2. Extract source to `openssl-fips` folder and `cd openssl-fips`
-3. `./config`
-4. `make`
-5. `make install`
-   (NOTE: to comply with the security policy you must use the exact
-   commands in steps 3-5 without any additional options as per
-   Appendix A in the [security policy](http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140sp/140sp1747.pdf).
-   The only exception is that `./config no-asm` can be
-   used in place of `./config`, and the FIPSDIR environment variable
-   may be used to specify a non-standard install folder for the
-   validated module, as per User Guide sections 4.2.1, 4.2.2, and 4.2.3.
-6. Get into Node.js checkout folder
-7. `./configure --openssl-fips=/path/to/openssl-fips/installdir`
-   For example on ubuntu 12 the installation directory was
-   `/usr/local/ssl/fips-2.0`
-8. Build Node.js with `make -j`
-9. Verify with `node -p "process.versions.openssl"` (for example `1.0.2a-fips`)
+This version of Node.js does not support FIPS.
 
 ## Building Node.js with external core modules
 
diff --git a/configure b/configure
index 84273f9395..e1843240ad 100755
--- a/configure
+++ b/configure
@@ -639,6 +639,25 @@ def get_version_helper(cc, regexp):
   else:
     return 0
 
+def get_nasm_version(asm):
+  try:
+    proc = subprocess.Popen(shlex.split(asm) + ['-v'],
+                            stdin=subprocess.PIPE, stderr=subprocess.PIPE,
+                            stdout=subprocess.PIPE)
+  except OSError:
+    warn('''No acceptable ASM compiler found!
+         Please make sure you have installed nasm from http://www.nasm.us
+         and refer BUILDING.md.''')
+    return 0
+
+  match = re.match(r"NASM version ([2-9]\.[0-9][0-9]+)",
+                   proc.communicate()[0])
+
+  if match:
+    return match.group(1)
+  else:
+    return 0
+
 def get_llvm_version(cc):
   return get_version_helper(
     cc, r"(^(?:FreeBSD )?clang version|based on LLVM) ([3-9]\.[0-9]+)")
@@ -677,6 +696,11 @@ def get_gas_version(cc):
 # quite prepared to go that far yet.
 def check_compiler(o):
   if sys.platform == 'win32':
+    if not options.openssl_no_asm:
+      nasm_version = get_nasm_version('nasm')
+      o['variables']['nasm_version'] = nasm_version
+      if nasm_version == 0:
+        o['variables']['openssl_no_asm'] = 1
     return
 
   ok, is_clang, clang_version, gcc_version = try_check_compiler(CXX, 'c++')
@@ -1039,32 +1063,35 @@ def configure_v8(o):
 
 
 def configure_openssl(o):
-  o['variables']['node_use_openssl'] = b(not options.without_ssl)
-  o['variables']['node_shared_openssl'] = b(options.shared_openssl)
-  o['variables']['openssl_no_asm'] = 1 if options.openssl_no_asm else 0
+  variables = o['variables']
+  variables['node_use_openssl'] = b(not options.without_ssl)
+  variables['node_shared_openssl'] = b(options.shared_openssl)
+  variables['openssl_no_asm'] = 1 if options.openssl_no_asm else 0
   if options.use_openssl_ca_store:
     o['defines'] += ['NODE_OPENSSL_CERT_STORE']
   if options.openssl_system_ca_path:
-    o['variables']['openssl_system_ca_path'] = options.openssl_system_ca_path
-  o['variables']['node_without_node_options'] = b(options.without_node_options)
+    variables['openssl_system_ca_path'] = options.openssl_system_ca_path
+  variables['node_without_node_options'] = b(options.without_node_options)
   if options.without_node_options:
       o['defines'] += ['NODE_WITHOUT_NODE_OPTIONS']
+
+  # supported asm compiler for AVX2. See https://github.com/openssl/openssl/
+  # blob/OpenSSL_1_1_0-stable/crypto/modes/asm/aesni-gcm-x86_64.pl#L52-L69
+  openssl110_asm_supported = \
+  ('gas_version' in variables and variables['gas_version'] >= '2.23') or \
+  ('xcode_version' in variables and variables['xcode_version'] >= '5.0') or \
+  ('llvm_version' in variables and variables['llvm_version'] >= '3.3') or \
+  ('nasm_version' in variables and variables['nasm_version'] >= '2.10')
+
+  if not openssl110_asm_supported and variables['openssl_no_asm'] == 0:
+    warn('''openssl_no_asm is enabled due to missed or old assembler.
+            Please refer BUILDING.md''')
+    variables['openssl_no_asm'] = 1
+
   if options.openssl_fips:
-    o['variables']['openssl_fips'] = options.openssl_fips
-    fips_dir = os.path.join('deps', 'openssl', 'fips')
-    fips_ld = os.path.abspath(os.path.join(fips_dir, 'fipsld'))
-    # LINK is for Makefiles, LD/LDXX is for ninja
-    o['make_fips_settings'] = [
-      ['LINK', fips_ld + ' <(openssl_fips)/bin/fipsld'],
-      ['LD', fips_ld + ' <(openssl_fips)/bin/fipsld'],
-      ['LDXX', fips_ld + ' <(openssl_fips)/bin/fipsld'],
-    ]
-  else:
-    o['variables']['openssl_fips'] = ''
-    try:
-      os.remove('config_fips.gypi')
-    except OSError:
-      pass
+     print('Error: FIPS is not supported yet in this version')
+     exit(1)
+  variables['openssl_fips'] = ''
 
   if options.without_ssl:
     def without_ssl_error(option):
diff --git a/node.gyp b/node.gyp
index 4709e5ec1e..0f6c160969 100644
--- a/node.gyp
+++ b/node.gyp
@@ -609,8 +609,8 @@
             {
               'action_name': 'mkssldef',
               'inputs': [
-                'deps/openssl/openssl/util/libeay.num',
-                'deps/openssl/openssl/util/ssleay.num',
+                'deps/openssl/openssl/util/libcrypto.num',
+                'deps/openssl/openssl/util/libssl.num',
               ],
               'outputs': ['<(SHARED_INTERMEDIATE_DIR)/openssl.def'],
               'action': [
diff --git a/tools/mkssldef.py b/tools/mkssldef.py
index 8354e5712e..3ff5353166 100755
--- a/tools/mkssldef.py
+++ b/tools/mkssldef.py
@@ -26,7 +26,7 @@ if __name__ == '__main__':
 
   for filename in filenames:
     for line in open(filename).readlines():
-      name, _, meta, _ = re.split('\s+', line)
+      name, _, _, meta, _ = re.split('\s+', line)
       if any(map(lambda p: p.match(name), excludes)): continue
       meta = meta.split(':')
       assert meta[0] in ('EXIST', 'NOEXIST')