summaryrefslogtreecommitdiff
path: root/src/testing/taler-unified-setup.sh
diff options
context:
space:
mode:
Diffstat (limited to 'src/testing/taler-unified-setup.sh')
-rwxr-xr-xsrc/testing/taler-unified-setup.sh934
1 files changed, 934 insertions, 0 deletions
diff --git a/src/testing/taler-unified-setup.sh b/src/testing/taler-unified-setup.sh
new file mode 100755
index 000000000..d933cc819
--- /dev/null
+++ b/src/testing/taler-unified-setup.sh
@@ -0,0 +1,934 @@
+#!/bin/bash
+#
+# This file is part of TALER
+# Copyright (C) 2023, 2024 Taler Systems SA
+#
+# TALER is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 3, or
+# (at your option) any later version.
+#
+# TALER is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public
+# License along with TALER; see the file COPYING. If not, see
+# <http://www.gnu.org/licenses/>
+#
+# Author: Christian Grothoff
+#
+# This script configures and launches various GNU Taler services.
+# Which ones depend on command-line options. Use "-h" to find out.
+# Prints "<<READY>>" on a separate line once all requested services
+# are running. Close STDIN (or input 'NEWLINE') to stop all started
+# services again.
+#
+# shellcheck disable=SC2317
+
+set -eu
+
+# These break TALER_HOME control via TALER_TEST_HOME...
+unset XDG_DATA_HOME
+unset XDG_CONFIG_HOME
+unset XDG_CACHE_HOME
+
+EXIT_STATUS=2
+
+# Exit, with status code "skip" (no 'real' failure)
+function exit_skip() {
+ echo " SKIP: " "$@" >&2
+ EXIT_STATUS=77
+ exit "$EXIT_STATUS"
+}
+
+# Exit, with error message (hard failure)
+function exit_fail() {
+ echo " FAIL: " "$@" >&2
+ EXIT_STATUS=1
+ exit "$EXIT_STATUS"
+}
+
+# Cleanup to run whenever we exit
+function cleanup()
+{
+ echo "Taler unified setup terminating at $STAGE!" >&2
+
+ for n in $(jobs -p)
+ do
+ kill "$n" 2> /dev/null || true
+ done
+ wait
+ rm -f libeufin-nexus.pid libeufin-sandbox.pid
+ exit "$EXIT_STATUS"
+}
+
+STAGE="boot"
+
+# Install cleanup handler (except for kill -9)
+trap cleanup EXIT
+
+WAIT_FOR_SIGNAL=0
+START_AUDITOR=0
+START_BACKUP=0
+START_EXCHANGE=0
+START_FAKEBANK=0
+START_DONAU=0
+START_CHALLENGER=0
+START_AGGREGATOR=0
+START_MERCHANT=0
+START_NEXUS=0
+START_BANK=0
+START_TRANSFER=0
+START_WIREWATCH=0
+START_DEPOSITCHECK=0
+START_MERCHANT_EXCHANGE=0
+START_MERCHANT_WIREWATCH=0
+USE_ACCOUNT="exchange-account-1"
+USE_VALGRIND=""
+WIRE_DOMAIN="x-taler-bank"
+CONF_ORIG="$HOME/.config/taler.conf"
+LOGLEVEL="DEBUG"
+DEFAULT_SLEEP="0.2"
+
+# Parse command-line options
+while getopts ':abc:d:DeEfghkL:mMnr:stu:vwWz' OPTION; do
+ case "$OPTION" in
+ a)
+ START_AUDITOR="1"
+ ;;
+ b)
+ START_BANK="1"
+ ;;
+ c)
+ CONF_ORIG="$OPTARG"
+ ;;
+ d)
+ WIRE_DOMAIN="$OPTARG"
+ ;;
+ D)
+ START_DONAU="1"
+ ;;
+ e)
+ START_EXCHANGE="1"
+ ;;
+ E)
+ START_MERCHANT_EXCHANGE="1"
+ ;;
+ f)
+ START_FAKEBANK="1"
+ ;;
+ h)
+ echo 'Supported options:'
+ echo ' -a -- start auditor'
+ echo ' -b -- start bank'
+ # shellcheck disable=SC2016
+ echo ' -c $CONF -- set configuration'
+ # shellcheck disable=SC2016
+ echo ' -d $METHOD -- use wire method (default: x-taler-bank)'
+ echo ' -D -- start donau'
+ echo ' -e -- start exchange'
+ echo ' -E -- start taler-merchant-exchange'
+ echo ' -f -- start fakebank'
+ echo ' -g -- start taler-exchange-aggregator'
+ echo ' -h -- print this help'
+ echo ' -k -- start challenger (KYC service)'
+ # shellcheck disable=SC2016
+ echo ' -L $LOGLEVEL -- set log level'
+ echo ' -m -- start taler-merchant'
+ echo ' -M -- start taler-merchant-depositcheck'
+ echo ' -n -- start nexus'
+ # shellcheck disable=SC2016
+ echo ' -r $MEX -- which exchange to use at the merchant (optional)'
+ echo ' -s -- start backup/sync'
+ echo ' -t -- start taler-exchange-transfer'
+ # shellcheck disable=SC2016
+ echo ' -u $SECTION -- exchange account to use'
+ echo ' -v -- use valgrind'
+ echo ' -w -- start taler-exchange-wirewatch'
+ echo ' -W -- wait for signal'
+ echo ' -z -- start taler-merchant-wirewatch'
+ exit 0
+ ;;
+ g)
+ START_AGGREGATOR="1"
+ ;;
+ k)
+ START_CHALLENGER="1"
+ ;;
+ L)
+ LOGLEVEL="$OPTARG"
+ ;;
+ m)
+ START_MERCHANT="1"
+ ;;
+ M)
+ START_DEPOSITCHECK="1"
+ ;;
+ n)
+ START_NEXUS="1"
+ ;;
+ r)
+ USE_MERCHANT_EXCHANGE="$OPTARG"
+ ;;
+ s)
+ START_BACKUP="1"
+ ;;
+ t)
+ START_TRANSFER="1"
+ ;;
+ u)
+ USE_ACCOUNT="$OPTARG"
+ ;;
+ v)
+ USE_VALGRIND="valgrind --leak-check=yes"
+ DEFAULT_SLEEP="2"
+ ;;
+ w)
+ START_WIREWATCH="1"
+ ;;
+ W)
+ WAIT_FOR_SIGNAL="1"
+ ;;
+ z)
+ START_MERCHANT_WIREWATCH="1"
+ ;;
+ ?)
+ exit_fail "Unrecognized command line option"
+ ;;
+ esac
+done
+
+STAGE="init"
+
+echo "Starting with configuration file at: $CONF_ORIG"
+CONF="$CONF_ORIG.edited"
+cp "${CONF_ORIG}" "${CONF}"
+
+STAGE="checks"
+
+echo -n "Testing for jq"
+jq -h > /dev/null || exit_skip " jq required"
+echo " FOUND"
+
+echo -n "Testing for wget"
+wget --help > /dev/null || exit_skip " wget required"
+echo " FOUND"
+
+if [ "1" = "$START_EXCHANGE" ]
+then
+ echo -n "Testing for Taler exchange"
+ taler-exchange-httpd -h > /dev/null || exit_skip " taler-exchange-httpd required"
+ echo " FOUND"
+fi
+
+if [ "1" = "$START_DONAU" ]
+then
+ echo -n "Testing for Donau"
+ donau-httpd -h > /dev/null || exit_skip " donau-httpd required"
+ echo " FOUND"
+fi
+
+if [ "1" = "$START_MERCHANT" ]
+then
+ echo -n "Testing for Taler merchant"
+ taler-merchant-httpd -h > /dev/null || exit_skip " taler-merchant-httpd required"
+ echo " FOUND"
+fi
+
+if [ "1" = "$START_CHALLENGER" ]
+then
+ echo -n "Testing for Taler challenger"
+ challenger-httpd -h > /dev/null || exit_skip " challenger-httpd required"
+ echo " FOUND"
+fi
+
+if [ "1" = "$START_BACKUP" ]
+then
+ echo -n "Testing for sync-httpd"
+ sync-httpd -h > /dev/null || exit_skip " sync-httpd required"
+ echo " FOUND"
+fi
+
+if [ "1" = "$START_NEXUS" ]
+then
+ echo -n "Testing for libeufin-cli"
+ libeufin-cli --help >/dev/null </dev/null || exit_skip " MISSING"
+ echo " FOUND"
+fi
+
+if [ "1" = "$START_BANK" ]
+then
+ echo -n "Testing for libeufin-bank"
+ libeufin-bank --help >/dev/null </dev/null || exit_skip " MISSING"
+ echo " FOUND"
+fi
+
+STAGE="config"
+
+
+EXCHANGE_URL=$(taler-config -c "$CONF" -s "EXCHANGE" -o "BASE_URL")
+CURRENCY=$(taler-config -c "$CONF" -s "TALER" -o "CURRENCY")
+
+echo "Setting up for $CURRENCY at $EXCHANGE_URL"
+
+register_bank_account() {
+ wget \
+ --http-user="$AUSER" \
+ --http-password="$APASS" \
+ --method=DELETE \
+ -o /dev/null \
+ -O /dev/null \
+ -a wget-delete-account.log \
+ "http://localhost:${BANK_PORT}/accounts/$1" \
+ || true # deletion may fail, that's OK!
+ if [ "$1" = "exchange" ] || [ "$1" = "Exchange" ]
+ then
+ IS_EXCHANGE="true"
+ else
+ IS_EXCHANGE="false"
+ fi
+ MAYBE_IBAN="${4:-}"
+ if [ -n "$MAYBE_IBAN" ]
+ then
+ # shellcheck disable=SC2001
+ ENAME=$(echo "$3" | sed -e "s/ /+/g")
+ # Note: this assumes that $3 has no spaces. Should probably escape in the future..
+ PAYTO="payto://iban/SANDBOXX/${MAYBE_IBAN}?receiver-name=$ENAME"
+ BODY='{"username":"'"$1"'","password":"'"$2"'","is_taler_exchange":'"$IS_EXCHANGE"',"name":"'"$3"'","payto_uri":"'"$PAYTO"'"}'
+ else
+ BODY='{"username":"'"$1"'","password":"'"$2"'","is_taler_exchange":'"$IS_EXCHANGE"',"name":"'"$3"'"}'
+ fi
+ wget \
+ --http-user="$AUSER" \
+ --http-password="$APASS" \
+ --method=POST \
+ --header='Content-type: application/json' \
+ --body-data="${BODY}" \
+ -o /dev/null \
+ -O /dev/null \
+ -a wget-register-account.log \
+ "http://localhost:${BANK_PORT}/accounts"
+}
+
+register_fakebank_account() {
+ if [ "$1" = "exchange" ] || [ "$1" = "Exchange" ]
+ then
+ IS_EXCHANGE="true"
+ else
+ IS_EXCHANGE="false"
+ fi
+ BODY='{"username":"'"$1"'","password":"'"$2"'","name":"'"$1"'","is_taler_exchange":'"$IS_EXCHANGE"'}'
+ wget \
+ --post-data="$BODY" \
+ --header='Content-type: application/json' \
+ --tries=3 \
+ --waitretry=1 \
+ --timeout=30 \
+ "http://localhost:$BANK_PORT/accounts" \
+ -a wget-register-account.log \
+ -o /dev/null \
+ -O /dev/null \
+ >/dev/null
+}
+
+
+if [[ "1" = "$START_BANK" ]]
+then
+ BANK_PORT=$(taler-config -c "$CONF" -s "libeufin-bank" -o "PORT")
+ BANK_URL="http://localhost:${BANK_PORT}/"
+fi
+
+if [[ "1" = "$START_FAKEBANK" ]]
+then
+ BANK_PORT=$(taler-config -c "$CONF" -s "BANK" -o "HTTP_PORT")
+ BANK_URL="http://localhost:${BANK_PORT}/"
+fi
+
+STAGE="bank"
+
+if [ "1" = "$START_BANK" ]
+then
+ echo -n "Setting up bank database ... "
+ libeufin-bank dbinit \
+ -r \
+ -c "$CONF" \
+ &> libeufin-bank-reset.log
+ echo "DONE"
+ echo -n "Launching bank ... "
+ libeufin-bank serve \
+ -c "$CONF" \
+ > libeufin-bank-stdout.log \
+ 2> libeufin-bank-stderr.log &
+ echo $! > libeufin-bank.pid
+ echo "DONE"
+ echo -n "Waiting for Bank ..."
+ OK="0"
+ for n in $(seq 1 100); do
+ echo -n "."
+ sleep "$DEFAULT_SLEEP"
+ wget --timeout=1 \
+ --tries=3 \
+ --waitretry=0 \
+ -a wget-bank-check.log \
+ -o /dev/null \
+ -O /dev/null \
+ "${BANK_URL}config" || continue
+ OK="1"
+ break
+ done
+ if [ "1" != "$OK" ]
+ then
+ exit_skip "Failed to launch services (bank)"
+ fi
+ echo "OK"
+ echo -n "Set admin password..."
+ AUSER="admin"
+ APASS="secret"
+ libeufin-bank \
+ passwd \
+ -c "$CONF" \
+ "$AUSER" "$APASS" \
+ &> libeufin-bank-passwd.log
+ libeufin-bank \
+ edit-account \
+ -c "$CONF" \
+ --debit_threshold="$CURRENCY:1000000" \
+ "$AUSER" \
+ &> libeufin-bank-debit-threshold.log
+ echo " OK"
+fi
+
+if [ "1" = "$START_NEXUS" ]
+then
+ echo "Nexus currently not supported ..."
+fi
+
+if [ "1" = "$START_FAKEBANK" ]
+then
+ echo -n "Setting up fakebank ..."
+ $USE_VALGRIND taler-fakebank-run \
+ -c "$CONF" \
+ -L "$LOGLEVEL" \
+ -n 4 \
+ 2> taler-fakebank-run.log &
+ echo " OK"
+fi
+
+if [[ "1" = "$START_NEXUS" || "1" = "$START_FAKEBANK" ]]
+then
+ echo -n "Waiting for the bank"
+ # Wait for bank to be available (usually the slowest)
+ OK="0"
+ for n in $(seq 1 300)
+ do
+ echo -n "."
+ sleep "$DEFAULT_SLEEP"
+ # bank
+ wget --tries=1 \
+ --waitretry=0 \
+ --timeout=1 \
+ --user admin \
+ --password secret \
+ -a wget-bank-check.log \
+ -o /dev/null \
+ -O /dev/null \
+ "http://localhost:${BANK_PORT}/" || continue
+ OK="1"
+ break
+ done
+ if [ "1" != "$OK" ]
+ then
+ exit_skip "Failed to launch services (bank)"
+ fi
+ echo " OK"
+fi
+
+STAGE="accounts"
+
+if [ "1" = "$START_FAKEBANK" ]
+then
+ echo -n "Register Fakebank users ..."
+ register_fakebank_account fortytwo x
+ register_fakebank_account fortythree x
+ register_fakebank_account exchange x
+ register_fakebank_account tor x
+ register_fakebank_account gnunet x
+ register_fakebank_account tutorial x
+ register_fakebank_account survey x
+ echo " DONE"
+fi
+
+if [ "1" = "$START_BANK" ]
+then
+ echo -n "Register bank users ..."
+ # The specified IBAN and name must match the ones hard-coded into
+ # the C helper for the add-incoming call. Without this value,
+ # libeufin-bank won't find the target account to debit along a /add-incoming
+ # call.
+ register_bank_account fortytwo x "User42" FR7630006000011234567890189
+ register_bank_account fortythree x "Forty Three"
+ register_bank_account exchange x "Exchange Company" DE989651
+ register_bank_account tor x "Tor Project"
+ register_bank_account gnunet x "GNUnet"
+ register_bank_account tutorial x "Tutorial"
+ register_bank_account survey x "Survey"
+ echo " DONE"
+fi
+
+STAGE="exchange"
+
+if [ "1" = "$START_EXCHANGE" ]
+then
+ echo -n "Starting exchange ..."
+ EXCHANGE_PORT=$(taler-config -c "$CONF" -s EXCHANGE -o PORT)
+ SERVE=$(taler-config -c "$CONF" -s EXCHANGE -o SERVE)
+ if [ "${SERVE}" = "unix" ]
+ then
+ EXCHANGE_URL=$(taler-config -c "$CONF" -s EXCHANGE -o BASE_URL)
+ else
+ EXCHANGE_URL="http://localhost:${EXCHANGE_PORT}/"
+ fi
+ MASTER_PRIV_FILE=$(taler-config -f -c "${CONF}" -s "EXCHANGE-OFFLINE" -o "MASTER_PRIV_FILE")
+ MASTER_PRIV_DIR=$(dirname "$MASTER_PRIV_FILE")
+ mkdir -p "${MASTER_PRIV_DIR}"
+ if [ ! -e "$MASTER_PRIV_FILE" ]
+ then
+ gnunet-ecc -g1 "$MASTER_PRIV_FILE" > /dev/null 2> /dev/null
+ echo -n "."
+ fi
+ MASTER_PUB=$(gnunet-ecc -p "${MASTER_PRIV_FILE}")
+ MPUB=$(taler-config -c "$CONF" -s exchange -o MASTER_PUBLIC_KEY)
+ if [ "$MPUB" != "$MASTER_PUB" ]
+ then
+ echo -n " patching master_pub ($MASTER_PUB)..."
+ taler-config -c "$CONF" -s exchange -o MASTER_PUBLIC_KEY -V "$MASTER_PUB"
+ fi
+ taler-exchange-dbinit -c "$CONF" --reset
+ $USE_VALGRIND taler-exchange-secmod-eddsa \
+ -c "$CONF" \
+ -L "$LOGLEVEL" \
+ 2> taler-exchange-secmod-eddsa.log &
+ $USE_VALGRIND taler-exchange-secmod-rsa \
+ -c "$CONF" \
+ -L "$LOGLEVEL" \
+ 2> taler-exchange-secmod-rsa.log &
+ $USE_VALGRIND taler-exchange-secmod-cs \
+ -c "$CONF" \
+ -L "$LOGLEVEL" \
+ 2> taler-exchange-secmod-cs.log &
+ $USE_VALGRIND taler-exchange-httpd \
+ -c "$CONF" \
+ -L "$LOGLEVEL" 2> taler-exchange-httpd.log &
+ echo " DONE"
+fi
+
+STAGE="donau"
+
+if [ "1" = "$START_DONAU" ]
+then
+ echo -n "Starting Donau ..."
+ DONAU_PORT=$(donau-config -c "$CONF" -s DONAU -o PORT)
+ SERVE=$(donau-config -c "$CONF" -s DONAU -o SERVE)
+ if [ "${SERVE}" = "unix" ]
+ then
+ DONAU_URL=$(donau-config -c "$CONF" -s DONAU -o BASE_URL)
+ else
+ DONAU_URL="http://localhost:${DONAU_PORT}/"
+ fi
+ donau-dbinit -c "$CONF" --reset
+ $USE_VALGRIND taler-exchange-secmod-eddsa -c "$CONF" -L "$LOGLEVEL" -s donau 2> donau-secmod-eddsa.log &
+ $USE_VALGRIND taler-exchange-secmod-rsa -c "$CONF" -L "$LOGLEVEL" -s donau 2> donau-secmod-rsa.log &
+ $USE_VALGRIND taler-exchange-secmod-cs -c "$CONF" -L "$LOGLEVEL" -s donau 2> donau-secmod-cs.log &
+ $USE_VALGRIND donau-httpd -c "$CONF" -L "$LOGLEVEL" 2> donau-httpd.log &
+ echo " DONE"
+fi
+
+STAGE="wirewatch"
+
+if [ "1" = "$START_WIREWATCH" ]
+then
+ echo -n "Starting wirewatch ..."
+ $USE_VALGRIND taler-exchange-wirewatch \
+ --account="$USE_ACCOUNT" \
+ -c "$CONF" \
+ -L "$LOGLEVEL" \
+ --longpoll-timeout="60 s" \
+ 2> taler-exchange-wirewatch.log &
+ echo " DONE"
+fi
+
+STAGE="aggregator"
+
+if [ "1" = "$START_AGGREGATOR" ]
+then
+ echo -n "Starting aggregator ..."
+ $USE_VALGRIND taler-exchange-aggregator \
+ -c "$CONF" \
+ -L "$LOGLEVEL" \
+ 2> taler-exchange-aggregator.log &
+ echo " DONE"
+fi
+
+STAGE="transfer"
+
+if [ "1" = "$START_TRANSFER" ]
+then
+ echo -n "Starting transfer ..."
+ $USE_VALGRIND taler-exchange-transfer \
+ -c "$CONF" \
+ -L "$LOGLEVEL" \
+ 2> taler-exchange-transfer.log &
+ echo " DONE"
+fi
+
+STAGE="merchant"
+
+if [ "1" = "$START_MERCHANT" ]
+then
+ echo -n "Starting merchant ..."
+ if [ -n "${USE_MERCHANT_EXCHANGE+x}" ]
+ then
+ MEPUB=$(taler-config -c "$CONF" -s "${USE_MERCHANT_EXCHANGE}" -o MASTER_KEY)
+ MXPUB=${MASTER_PUB:-$(taler-config -c "$CONF" -s exchange -o MASTER_PUBLIC_KEY)}
+ if [ "$MEPUB" != "$MXPUB" ]
+ then
+ echo -n " patching master_pub ($MXPUB)..."
+ taler-config -c "$CONF" -s "${USE_MERCHANT_EXCHANGE}" -o MASTER_KEY -V "$MXPUB"
+ fi
+ fi
+ MERCHANT_TYPE=$(taler-config -c "$CONF" -s MERCHANT -o SERVE)
+ if [ "unix" = "$MERCHANT_TYPE" ]
+ then
+ MERCHANT_URL="$(taler-config -c "$CONF" -s MERCHANT -o BASE_URL)"
+ else
+ MERCHANT_PORT="$(taler-config -c "$CONF" -s MERCHANT -o PORT)"
+ MERCHANT_URL="http://localhost:${MERCHANT_PORT}/"
+ fi
+ taler-merchant-dbinit \
+ -c "$CONF" \
+ --reset &> taler-merchant-dbinit.log
+ $USE_VALGRIND taler-merchant-httpd \
+ -c "$CONF" \
+ -L "$LOGLEVEL" 2> taler-merchant-httpd.log &
+ $USE_VALGRIND taler-merchant-webhook \
+ -c "$CONF" \
+ -L "$LOGLEVEL" 2> taler-merchant-webhook.log &
+ echo " DONE"
+ if [ "1" = "$START_MERCHANT_WIREWATCH" ]
+ then
+ echo -n "Starting taler-merchant-wirewatch ..."
+ $USE_VALGRIND taler-merchant-wirewatch \
+ -c "$CONF" \
+ -L "$LOGLEVEL" \
+ --persist \
+ 2> taler-merchant-wirewatch.log &
+ echo " DONE"
+ fi
+ if [ "1" = "$START_MERCHANT_EXCHANGE" ]
+ then
+ echo -n "Starting taler-merchant-exchange ..."
+ $USE_VALGRIND taler-merchant-exchange \
+ -c "$CONF" \
+ -L "$LOGLEVEL" 2> taler-merchant-exchange.log &
+ echo " DONE"
+ fi
+ if [ "1" = "$START_DEPOSITCHECK" ]
+ then
+ echo -n "Starting taler-merchant-depositcheck ..."
+ $USE_VALGRIND taler-merchant-depositcheck \
+ -c "$CONF" \
+ -L "$LOGLEVEL" 2> taler-merchant-depositcheck.log &
+ echo " DONE"
+ fi
+fi
+
+STAGE="sync"
+
+if [ "1" = "$START_BACKUP" ]
+then
+ echo -n "Starting sync ..."
+ SYNC_PORT=$(taler-config -c "$CONF" -s SYNC -o PORT)
+ SERVE=$(taler-config -c "$CONF" -s SYNC -o SERVE)
+ if [ "${SERVE}" = "unix" ]
+ then
+ SYNC_URL=$(taler-config -c "$CONF" -s SYNC -o BASE_URL)
+ else
+ SYNC_URL="http://localhost:${SYNC_PORT}/"
+ fi
+ sync-dbinit -c "$CONF" --reset
+ $USE_VALGRIND sync-httpd \
+ -c "$CONF" \
+ -L "$LOGLEVEL" \
+ 2> sync-httpd.log &
+ echo " DONE"
+fi
+
+STAGE="challenger"
+
+if [ "1" = "$START_CHALLENGER" ]
+then
+ echo -n "Starting challenger ..."
+ CHALLENGER_PORT=$(challenger-config -c "$CONF" -s CHALLENGER -o PORT)
+ SERVE=$(taler-config -c "$CONF" -s CHALLENGER -o SERVE)
+ if [ "${SERVE}" = "unix" ]
+ then
+ CHALLENGER_URL=$(taler-config -c "$CONF" -s CHALLENGER -o BASE_URL)
+ else
+ CHALLENGER_URL="http://localhost:${CHALLENGER_PORT}/"
+ fi
+ challenger-dbinit \
+ -c "$CONF" \
+ --reset
+ $USE_VALGRIND challenger-httpd \
+ -c "$CONF" \
+ -L "$LOGLEVEL" \
+ 2> challenger-httpd.log &
+ echo " DONE"
+ for SECTION in $(taler-config -c "$CONF" -S | grep kyc-provider)
+ do
+ LOGIC=$(taler-config -c "$CONF" -s "$SECTION" -o "LOGIC")
+ if [ "${LOGIC}" = "oauth2" ]
+ then
+ INFO=$(taler-config -c "$CONF" -s "$SECTION" -o "KYC_OAUTH2_INFO_URL")
+ if [ "${CHALLENGER_URL}info" = "$INFO" ]
+ then
+ echo -n "Enabling Challenger client for $SECTION"
+ CLIENT_SECRET=$(taler-config -c "$CONF" -s "$SECTION" -o "KYC_OAUTH2_CLIENT_SECRET")
+ RFC_8959_PREFIX="secret-token:"
+ if ! echo "${CLIENT_SECRET}" | grep ^${RFC_8959_PREFIX} > /dev/null
+ then
+ exit_fail "Client secret does not begin with '${RFC_8959_PREFIX}'"
+ fi
+ REDIRECT_URI="${EXCHANGE_URL}kyc-proof/kyc-provider-example-challeger"
+ CLIENT_ID=$(challenger-admin --add="${CLIENT_SECRET}" --quiet "${REDIRECT_URI}")
+ taler-config -c "$CONF" -s "$SECTION" -o KYC_OAUTH2_CLIENT_ID -V "$CLIENT_ID"
+ echo " DONE"
+ fi
+ fi
+ done
+fi
+
+STAGE="auditor"
+
+if [ "1" = "$START_AUDITOR" ]
+then
+ echo -n "Starting auditor ..."
+ AUDITOR_URL=$(taler-config -c "$CONF" -s AUDITOR -o BASE_URL)
+ AUDITOR_PRIV_FILE=$(taler-config -f -c "$CONF" -s AUDITOR -o AUDITOR_PRIV_FILE)
+ AUDITOR_PRIV_DIR=$(dirname "$AUDITOR_PRIV_FILE")
+ mkdir -p "$AUDITOR_PRIV_DIR"
+ if [ ! -e "$AUDITOR_PRIV_FILE" ]
+ then
+ gnunet-ecc -g1 "$AUDITOR_PRIV_FILE" > /dev/null 2> /dev/null
+ echo -n "."
+ fi
+ AUDITOR_PUB=$(gnunet-ecc -p "${AUDITOR_PRIV_FILE}")
+ MAPUB=${MASTER_PUB:-$(taler-config -c "$CONF" -s exchange -o MASTER_PUBLIC_KEY)}
+ taler-auditor-dbinit \
+ -c "$CONF" \
+ --reset
+ $USE_VALGRIND taler-auditor-httpd \
+ -L "$LOGLEVEL" \
+ -c "$CONF" 2> taler-auditor-httpd.log &
+# $USE_VALGRIND taler-helper-auditor-deposits \
+# -L "$LOGLEVEL" \
+# -c "$CONF" 2> taler-helper-auditor.log &
+ echo " DONE"
+fi
+
+STAGE="wait"
+
+echo -n "Waiting for Taler services ..."
+# Wait for all other taler services to be available
+E_DONE=0
+M_DONE=0
+S_DONE=0
+K_DONE=0
+A_DONE=0
+for n in $(seq 1 20)
+do
+ sleep "$DEFAULT_SLEEP"
+ OK="0"
+ if [ "0" = "$E_DONE" ] && [ "1" = "$START_EXCHANGE" ]
+ then
+ echo -n "E"
+ wget \
+ --tries=1 \
+ --timeout=1 \
+ "${EXCHANGE_URL}config" \
+ -o /dev/null \
+ -O /dev/null >/dev/null || continue
+ E_DONE=1
+ fi
+ if [ "0" = "$M_DONE" ] && [ "1" = "$START_MERCHANT" ]
+ then
+ echo -n "M"
+ wget \
+ --tries=1 \
+ --timeout=1 \
+ "${MERCHANT_URL}config" \
+ -o /dev/null \
+ -O /dev/null >/dev/null || continue
+ M_DONE=1
+ fi
+ if [ "0" = "$S_DONE" ] && [ "1" = "$START_BACKUP" ]
+ then
+ echo -n "S"
+ wget \
+ --tries=1 \
+ --timeout=1 \
+ "${SYNC_URL}config" \
+ -o /dev/null \
+ -O /dev/null >/dev/null || continue
+ S_DONE=1
+ fi
+ if [ "0" = "$K_DONE" ] && [ "1" = "$START_CHALLENGER" ]
+ then
+ echo -n "K"
+ wget \
+ --tries=1 \
+ --timeout=1 \
+ "${CHALLENGER_URL}config" \
+ -o /dev/null \
+ -O /dev/null >/dev/null || continue
+ K_DONE=1
+ fi
+ if [ "0" = "$A_DONE" ] && [ "1" = "$START_AUDITOR" ]
+ then
+ echo -n "A"
+ wget \
+ --tries=1 \
+ --timeout=1 \
+ "${AUDITOR_URL}config" \
+ -o /dev/null \
+ -O /dev/null >/dev/null || continue
+ A_DONE=1
+ fi
+ OK="1"
+ break
+done
+if [ 1 != "$OK" ]
+then
+ exit_skip "Failed to launch (some) Taler services"
+fi
+echo " OK"
+
+if [ "1" = "$START_EXCHANGE" ]
+then
+ echo -n "Wait for exchange /management/keys to be ready "
+ OK="0"
+ LAST_RESPONSE=$(mktemp tmp-last-response.XXXXXXXX)
+ for n in $(seq 1 10)
+ do
+ echo -n "."
+ sleep "$DEFAULT_SLEEP"
+ # exchange
+ wget \
+ --tries=3 \
+ --waitretry=0 \
+ --timeout=30 \
+ "${EXCHANGE_URL}management/keys"\
+ -o /dev/null \
+ -O "$LAST_RESPONSE" \
+ >/dev/null || continue
+ OK="1"
+ break;
+ done
+ if [ "1" != "$OK" ]
+ then
+ cat "$LAST_RESPONSE"
+ exit_fail "Failed to setup exchange keys, check secmod logs"
+ fi
+ rm "$LAST_RESPONSE"
+ echo " OK"
+
+ echo -n "Setting up exchange keys ..."
+ taler-exchange-offline -c "$CONF" \
+ download \
+ sign \
+ wire-fee now "$WIRE_DOMAIN" "$CURRENCY:0.01" "$CURRENCY:0.01" \
+ global-fee now "$CURRENCY:0.01" "$CURRENCY:0.01" "$CURRENCY:0.0" 1h 1year 5 \
+ upload &> taler-exchange-offline.log
+ echo "OK"
+ ENABLED=$(taler-config -c "$CONF" -s "$USE_ACCOUNT" -o "ENABLE_CREDIT")
+ if [ "YES" = "$ENABLED" ]
+ then
+ echo -n "Configuring bank account $USE_ACCOUNT ..."
+ EXCHANGE_PAYTO_URI=$(taler-config -c "$CONF" -s "$USE_ACCOUNT" -o "PAYTO_URI")
+ taler-exchange-offline -c "$CONF" \
+ enable-account "$EXCHANGE_PAYTO_URI" \
+ upload &> "taler-exchange-offline-account.log"
+ echo " OK"
+ else
+ echo "WARNING: Account ${USE_ACCOUNT} not enabled (set to: '$ENABLED')"
+ fi
+ if [ "1" = "$START_AUDITOR" ]
+ then
+ echo -n "Enabling auditor ..."
+ taler-exchange-offline -c "$CONF" \
+ enable-auditor "$AUDITOR_PUB" "$AUDITOR_URL" "$CURRENCY Auditor" \
+ upload &> taler-exchange-offline-auditor.log
+ echo "OK"
+ fi
+
+ echo -n "Checking /keys "
+ OK="0"
+ LAST_RESPONSE=$(mktemp tmp-last-response.XXXXXXXX)
+ for n in $(seq 1 10)
+ do
+ echo -n "."
+ sleep "$DEFAULT_SLEEP"
+ wget \
+ --tries=1 \
+ --timeout=5 \
+ "${EXCHANGE_URL}keys" \
+ -a wget-keys-check.log \
+ -o /dev/null \
+ -O "$LAST_RESPONSE" \
+ >/dev/null || continue
+ OK="1"
+ break
+ done
+ if [ "1" != "$OK" ]
+ then
+ cat "$LAST_RESPONSE"
+ exit_fail " Failed to fetch ${EXCHANGE_URL}keys"
+ fi
+ rm "$LAST_RESPONSE"
+ echo " OK"
+fi
+
+if [ "1" = "$START_AUDITOR" ]
+then
+ echo -n "Setting up auditor signatures ..."
+ timeout 15 taler-auditor-offline -c "$CONF" \
+ download \
+ sign \
+ upload &> taler-auditor-offline.log
+ echo " OK"
+fi
+
+STAGE="ready"
+
+# Signal caller that we are ready.
+echo "<<READY>>"
+
+if [ "1" = "$WAIT_FOR_SIGNAL" ]
+then
+ while true
+ do
+ sleep 0.1
+ done
+else
+ # Wait until caller stops us.
+ # shellcheck disable=SC2162
+ read
+fi
+
+STAGE="exiting"
+
+echo "Taler unified setup terminating!" >&2
+EXIT_STATUS=0
+exit "$EXIT_STATUS"
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-27 06:30:05 +0000