path: root/design-documents/012-fee-schedule-metrics.rst
blob: efcebd7398db47f0401db8cabbb4a7fc7e2bf9b9 (plain)
Fees schedule and fee metrics

.. warning::

  This document is a draft.

This chapter discusses considerations for fees from different points of view (Exchange operators, customer/users, and sellers/merchants.

Fees are necessary for covering costs that Exchange operators bear for offering their services established in-house or outsourced in a data center: Variable costs (e.g. electricity and wire fees for every wired transaction to bank accounts) and expenses of constant height for hardware, company assets, marketing and staff, and so forth. They will allocate these costs to customers. The Taler protocol therefore offers different types of fees for each type of transaction that may appear in the transaction cycle. There are six fee types available which can be chosen by the Exchange operator, defining their specific value within the limits given by the protocol.

Any coin that has been generated or that is used (deposited) or refreshed can be charged with an applicable fee type. In addition to this, every wired amount of money can be charged with a wire fee. The six fee types are named as 'Withdrawal', 'Deposit', 'Refresh', 'Refund', 'Wire fee' and 'Closing'. The fee type 'Closing' is used for allocating costs that arise from an uncompleted withdrawal transaction when an amount of fiat money has to be wired back from the Exchange's escrow account to the bank account of origin.

Fee types and their underlying metrics are not only due to cover real costs in the long run, but also to reward users for their economic behaviour, to prevent misuse, and to allow Exchange operators to gain certain income and most probably profits. Exchange operators are thus determining the combination of fee types and the height of each fee for every denomination of coins. Any chosen denomination (constant nominal value of coins preset by the operator by means of the Denomination key) will subsequently come along with a variety of fee types and their individually specified height.

Proposed Solution

Fee schedule

Whereas the Taler protocol determines types of fees, Exchange operators determine the upper and lower limits of fees using parameters. Once they have set the fee height per denomination, the algorithm of the Taler payment system will allocate costs automatically to every generated coin respectively to a wired amount.

The fee structure and its underlying metrics are also bound to rules and expectations of financial regulatory authorities like the German Federal Financial Supervisory Authority (Bundesanstalt für Finanzdienstleistungsaufsicht BaFin). Changes to the fee structure are therefore eligible only when they are in accordance with national or international laws and directives.

Fees chosen by Exchange operators have to be explained to the users by means of comprehensive Terms and conditions of services that rule out the different and heights of fees and how they are calculated. Costs for wired amounts within the banking system (IBAN transfers to the Exchange's escrow account for the withdrawal transaction; IBAN: International Banking Account Number) have to be covered by users, so additionally Terms and conditions of their banks may be effective, too. These Terms of banking services are not part of the Taler payment system, nevertheless Exchange operators should make users aware of this fact, that each wired transactions may cause costs on their expense.

1. Obligations of Exchange operators

Exchange operators have to adhere to the fee schedule. Otherwise they can lose their interface access, have their certification revoked and, moreover, even become liable for damages. For each transaction type there is one specific fee type. Exchange operators set the height of fees. If a fee type is set to a value of 0, this fee type will not contribute to the operator's income from fees.

Three fee types ('Wire fee', 'Closing' and 'Recoup') will cause costs for Exchange operators due to wire transfers to accounts wired by banks. Therefore, operators must find suitable ways to have these costs covered by customers.

The 'Recoup' protocol does not allow Exchange operators to set any fee height, because reimbursing funds from an Exchange that is about to cease its activity must always be at zero costs for the users. Wiring fees in the case of 'Recoup' have to be entirely covered by Exchange operators instead.

Setting all of the six fee types to 0 means would simply the payment system and make it more attractive to users. However, Exchange operators need effective counter-measures against possible misuse. Transactions that are abundantly often repeated by malicious users are driving costs, thus harming operators. Making these transactions costly to those who trigger them intentionally is the only way to solve this issue.

For example, if the Exchange operator sets the 'Refresh' fee at the level of the specific costs incurred for this transaction type, malicious cost driving with refresh does at least not damage the exchange, but only charges those users who have their coins refreshed particularly frequently (see detailed below).

Operators agree that their audit reports report income from fees to the auditors and, accordingly, to the supervisory authorities. Fees on coins at set the time they are issued and cannot be changed afterwards. According to the Taler protocol, fees on bank transfers can only be adjusted annually and are set by the operator for at least 2 years in the future. Thanks to this constant fee, merchants can better plan costs to be added and include them in their sales prices.

Terms and conditions of every Exchange must also clearly indicate to the user that if they refuse to save copies of their Taler coins (with a backup tool like e.g. "Anastasis") they are risking a total loss of coin ownership.

A private bank that hosts an Exchange and normally charges its customers for IBAN transfers has the option of waiving the applying fees for their customers when they are withdrawing from their own checking accounts into Taler wallets.

2. Buyer's obligations

Prior to making a first withdrawal from an Exchange users are required to read and confirm the Terms and conditions of the relevant Exchange. This step is mandatory when changes to Terms and conditions take place. Users accept Terms and conditions by confirming them in the mobile application or on the web. Terms and conditions also require users to accept possible losses of funds in wallets through 'Refresh' fees, which can be eventually charged by Exchange operators.

All charge types and amounts are displayed to users prior to each withdrawal. Specific transaction-related transaction fees that users would have to pay are always displayed by the wallet as part of the interactive transaction process. Wire fees are also shown to the users. The fee type 'Wire fee' allows merchants (sellers) to split the charged amount when they deem an Exchange's wire fee to be too high and pass on the split charge to buyers and bear the remainder. The respective amount of the 'Wire fee' is set by the merchant using the variable wire_fee_amortization and will be automatically applied.

In accordance with the Terms and conditions, the users agree not to make any claim for damages against the payment system or the Exchange operator due to losses incurred by them as a result of theft or self-inflicted failure to secure the coins in the Taler wallet.

Furthermore, according to the Terms and conditions, users must accept that the IBAN transfer from the users' personal checking account to the Exchange's escrow account may incur costs depending on the contract with their banks. These costs are not related to the Taler payment system and cannot be influenced by it.

3. Obligations of merchants/sellers

Normally, a plurality of buyers' spending transactions is summed up to one aggregated amount of revenue and wired to the receiving checking account of the merchant. Merchants can set the frequency by which these aggregated amounts are wired. Every wire transfer imposes costs on the Exchange operator collected by the operator's bank for having the amount wired. Therefore, the Exchange operator will tend to charge the 'Wire fee' to the sellers for this transaction type, as the sellers are the ones causing the aggregated transfer and not the buyers. If from a seller's point of view an Exchange operator has set the 'Wire fee' too high, the seller can make use of the Taler Merchant software and determine the so-called amortization factor to add all or part of the 'Wire fee' to the amount payable by customers who deposit coins from their wallets funded via this Exchange.

During the withdrawal process, the wallet shows to the buyer the complete fee schedule and indicates the 'Wire fee' in case this fee is really charged. However, if a seller takes over the wire fee charge instead of the customers, the customers' wallets will no longer show a wire fee for that seller. These sellers thus render the fee schedule clearer for their customers, but certainly will have the wire fee calculated with their sales prices.

Given the case that sellers enter incorrect account data for their own checking account, they are solely liable for any resulting damage and not the Exchange operator. Sellers bear the risk of a loss of value or even a total loss of their revenue if they enter a wrong IBAN for the transfer of their revenue, although syntactically correct. Similarly, the sellers alone bear charges due to an incorrect receiving account number or other posting errors that they cause and for which manual routing becomes necessary (e.g. in the case of lapsed accounts).

4. Technical framework conditions for the collection of fees

Fees are charged per coin or per wire transfer. The number of coins at withdrawal usually increases logarithmically with the amount represented. Fees can be applied to both flow quantities (e.g. coins moved at withdrawal and deposit transactions) and static quantities (e.g. coins stored in wallets). The fees on coins may differ depending on the time of issuance of a coin and depending on the value of a coin. They are fixed for each coin with its time of issuance, so they cannot be changed subsequently during their validity by the Exchange operator.

During the entire period of validity, all Denomination keys and the selected fee types shall remain valid. Each fee type is always managed as a variable in the exchange interface even if the amount is 0 units.

The refresh transaction is automatically triggered by the wallet software 3 months before the end of the validity of a coin. Especially if Exchange operators charge refresh fees, they have to point out this automatic feature to the users in their Terms and conditions.

Fee types

The Taler protocol offers the following fee types:

1. 'Withdrawal': For each successful withdrawal from the checking account, per coin
2. 'Deposit': For spending, per coin
3. 'Refresh': Per coin for
    a. Refresh transactions for receiving change
    b. Refresh of coins at the end of their validity
    c. Abort of transactions due to network failure
    d. Refund
4. 'Refund': For refunds or in case of contract cancellation by seller, per coin
5. 'Wire fee': For aggregated amounts wired by the Exchange to the merchant's checking account, per wire transfer
6. 'Closing': In case that a withdrawal process could not be accomplished (the users' wallet did not withdraw the value from the reserve), per wire transfer from the Exchange's escrow account to the account of origin

Effects of fee types on Exchange operators, buyers and sellers

Each of the above fee types is now considered viewed from the perspective of the buyer, the exchange operator, and the seller:

* 'Withdrawal' from the buyer's point of view:

Anyone who wants to load Taler wallets with coins must initiate a wire transfer from the own checking account to the Exchange operator's escrow account to let the Exchange fund a reserve which can be subsequently withdrawn by the wallet. Costs for the wire transfer may be incurred according to the user's contract with the bank. In addition to these potentially incurred costs, the withdrawal fee could be charged for each coin withdrawn into the wallet. Even though many bank customers are already accustomed to wire transfer charges, the withdrawal fee acts like a loss of purchasing power even before intended transactions take place. Buyers are made aware this loss when being shown all types of fees at withdrawal. Once buyers become aware that they will have to pay the cost for each coin generated, they might prefer to have as few high-denomination coins as possible withdrawn into their wallets.

* 'Withdrawal' from the Exchange operator's point of view:

A fee on each coin generated would indeed hit all electronic coins withdrawn from an exchange operator and allocate costs necessary for their generation over all coins signed for the first time, but would not prevent abuse through other transactions like intentionally often triggered refresh or refund and would also discriminate against those users who withdraw and deposit many smaller denominations. Furthermore, buyers using coins with higher denominations could increase the exchange operator's costs by increasing refresh transactions. Overall, the cost increases are marginally small, though.

* 'Withdrawal' from the seller's point of view:

While withdrawal fees do not burden sellers, withdrawal fees are imposing a threshold for their customers (see argumentation above). Sellers would even prefer to include the costs of generating coins in their selling prices and hide it from customers. However, the coins generated for customers during the withdrawal process do not correspond with the sellers in any way.

* 'Deposit' from the buyer's point of view:

Although customers are triggering the deposit request to finalize their purchase, it is always the seller who has to bear the deposit fee per coin - but only up to a maximum value determined by the seller (using the variable default_max_deposit_fee). The remainder of the deposit fee exceeding this maximum value has to be paid by the respective buyer. Deposit fees could theoretically be used to distribute all costs that Exchange operators have to bear. This would mean that all costs will be allocated to all coins deposited for buying goods and services. Usually, buyers can easily understand that a fee is charged on deposited coins. This is why 'Deposit' should be taken into consideration as an important and easy to propagate fee, not only from a buyers' perspective, but also from the operators' point of view.

* 'Deposit' from the Exchange operator's point of view:

During deposit, the Exchange logic compares the public key of each coin with the keys stored in an array in the Exchange's Postgres database and examines each coin to determine whether it is redeemed for payment for the first time. This process consumes little energy and adds no additional cost. For Exchange operators, this marginally small cost factor can only become significant when there is a very high amount of deposit transactions to encounter (e.g. at large web-shops). Deposit fees, above all, represent the most important source of income for the Exchange operator and can easily be collected over all coins used.

* 'Deposit' from the seller's point of view:

If an Exchange operator charges relatively high deposit fees, sellers have a means to correlate the fee height. As pointed out before, a seller must bear deposit fees, but only up to the maximum determined by the variable default_max_deposit_fee, which every seller specifies individually.

Deposit fees will also affect refund transactions, for example when a rebate is given by the seller to the customer. Only in the case of a complete withdrawal from the contract by the seller the refund transaction exempts the buyers from deposit fees. Then, the refund transaction incurs the refresh fee only that would be borne by the buyers. If the seller's refund is partly, only the seller's deposit fee is waived, which means from the buyer's perspective a partly refunded purchase with coins signed at an Exchange with high deposit fees is becoming less attractive. In other words: Deposit fees exceeding the seller's maximum value will be borne by the buyers, making the rebate worse from the buyers' perspective.

Generally, sellers want to ensure that
(1) the exchange selected by the buyers complies with the regulatory requirements of the supervisory authorities (e.g. BaFin) and with anti-money laundering laws (AML), 
(2) if paying is in EURO the exchange operates in the SEPA currency area, and 
(3) the fees of the selected exchange are within the limits of what the seller sets using its maximum deposit fee values (and wire fee maximum values as described below). 

* 'Refresh' from the buyer's point of view:

Refresh fees are mostly caused by the generation of fresh coins as change for a coin of higher denomination that was redeemed for a smaller price that had to be paid: The payment amount was paid with a coin of a higher denomination, subsequently the wallet receives coins with denominations that add up to the difference. The refresh fee for the change booking is therefore only ever charged for one coin used and is marginally low from the buyer's point of view. Refresh also occurs together with refund transactions (a refresh transaction will always be triggered subsequently to discounting or a cancellation of purchase contracts). Less often are refresh transactions due to the expiration of coins or because of transaction aborts after network errors. The fee on refreshes is charged per coin and will be burdened to buyers. It is intended to deter costs incurred by the Exchange in the event of misuse. Buyers will marginally consider this fee as a small personal burden as a remedy to avoid possible abuse with refreshes triggered off in masses by a harmful party, as its absolute amount per coin is low.

* 'Refresh' from the Exchange operator's point of view:

As long as there is no abuse with refresh transactions, the Exchange operator has to consider whether to pass on the costs for refreshes directly to the buyers or to cover these costs with another type of fee. Using the refresh fee to cover costs subsequent to intentional abuse means that the originator of malicious refreshes charges all buyers of a targeted Exchange for their regular refresh bookings. While this does not prevent abuse itself, it only makes the transaction type 'Refresh' costly for those who frequently trigger refreshes. In the acute case of abuse, buyers are then charged fees, but the maliciously caused costs at least do not affect the specific Exchange, but all end users who receive signed coins from it.

* 'Refresh' from the seller's point of view:

Refresh transactions do not directly affect sellers, but the refund transaction does (see below here).

* 'Refund' from the buyer's point of view:

In contrast to the refresh fee type, the sellers - and not the buyers - are triggering the refund booking. If an Exchange charges the refund fee type, the already deposited coins of the buyers would be charged with this fee in case of a partial refund due to discounting after the conclusion of the purchase contract. Only in case of a full refund, the coins of the buyers will be relieved from deposit fees, but then they will be charged with the refresh fee, if the fee schedule of the Exchange chosen by the buyers levies the refresh fee. Normally, it lies within the seller's responsibility to give the reason for a discount or rebate. From the buyers' point of view, therefore, the sellers should legitimately bear this fee.

* 'Refund' from the Exchange operator's point of view:

Exchange operators cannot suppress refund postings because they must allow sellers to discount and cancel purchase contracts. A partial refund only partially relieves buyers of their deposit fees. Over time, customers are more likely to avoid such sellers who often have to discount after a contract is signed. Sellers who repeatedly trigger complete refunds, while exempting buyers' coins already deposited with the exchange from deposit fees, burden them with refresh fees. Should an Exchange operator then waive the refresh fee, it would incur costs. To avoid this, the Exchange operator must introduce or increase refresh fees, thereby charging all of its customers more by applying the refresh fee. From the point of view of the Exchange operator, the costs of both the partial and the complete refunds should have to be borne by the sellers, though, so that sellers should feel an incentive to avoid discounts or contract cancellation as far as possible, to fulfill the agreements on goods and services in accordance with the purchase contracts, and likewise to encourage their buyers to trigger returns and contract withdrawals less frequently (with all the economic and ecological effects that this entails, e.g. through frequent arbitrary returns of goods, the delivery and shipping costs, parcel handling and ecological damages that come along with this).

* 'Refund' from the seller's point of view:

As of today's implementation, in the event of a withdrawal from the purchase agreement, buyers bear the cost of the refund fee if the exchange charges it; in the event of a partial rebate, buyers bear the deposit fee for their used coins. Sellers are generally interested in keeping cancellations of contracts low and try to avoid unnecessary discount.

* 'Wire fee' from the buyer's point of view:

This fee is to be paid by the sellers (i.e. merchants or generally all recipients of coins). The wire fee directly affects buyers only in the following case: The protocol allows sellers to partially pass on the cost of the wire fee to buyers if the Exchange operator that signed buyers' coins sets the wire fee above the value that each seller can define in the merchant backend via max_wire_fee. It is no secret, though, that all the costs and the fees are included in retail price tags. At the end of the day, it is always the customers to pay for. Nevertheless, sellers could pass on the relative cost advantages of the Taler payment system to their customers by offering lower retail prices, but they are not forced to do so.

* 'Wire fee' from the Exchange operator's point of view:

Exchange operators may charge wire fees in order to cover their expenses for wiring the value of coins to the beneficiaries. The wire fee passes on the cost of wire transfers from the Exchange's escrow account to the receiving banking accounts, and for this usually banks charge handling fees. Buyers are only shown the wire fee if the seller does not bear them to the full extent. For Exchange operators, opting out of the wire fee would be tantamount to giving sellers carte blanche to trigger an aggregated booking of their sales revenue as often as possible. If, on the other hand, the Exchange operator charges the wire fee, this will cause the sellers to adjust the frequency of the aggregated wire transfer as they need it for their business and want to afford the fee for it. As the frequency increases, so does the absolute cost due to wire fees to sellers. Buyers learn about the wire fee charge only in the event that an Exchange operator sets it higher than the value that a seller had defined with max_wire_fee.

* 'Wire fee' from the seller's point of view:

Sellers want to register their sales as quickly and often as possible. Timely revenue recognition improves their liquidity and generates interest income if sales revenues are received earlier than payments to suppliers. They are therefore forced to argue whether they would rather bear higher absolute costs due to the wire fee or forego liquidity. For some merchants, on the other hand, the volume of purchases determines the frequency of the aggregated wire transfer so as not to overload the accounting and billing departments. In any case, the costs of the wire fee are included in the end-user prices.

* 'Closing' from the buyer's point of view:

The closing charge is triggered by users of the payment system if, after a successful wire transfer to an Exchange's escrow account, they do not have the reserve withdraw to their personal wallet. This could be the case when for example the wallet did not connect to the Taler exchange within 14 days. Costs incur to the Exchange for the wire transfer back to the originating account. This is done by remitting the original amount minus the cost of wire transfers and possibly manual routing. The closing fee is easy to enforce and meets with understanding from most users. Commonly they will not be affected by this type of fee and can also quickly understand the Terms and conditions that they must bear the costs for self-inflicted issues at withdrawal.

* 'Closing' from the Exchange operator's point of view:

Costs for the closing of a reserve are incurred by the Exchange operator due to irregular user behavior. However, Exchange operators may charge a fee for covering these costs to the user who caused them. The closing fee is indispensable for Exchange operators in order to prevent abuse through cost driving by malicious parties. Charging the fee by retaining it always works smoothly because the Exchange's escrow account is already in possession of users' funds through their wire transfers.

* 'Closing' from the seller's point of view:

The closing transaction does not affect sellers in any way. 



Discussion / Q&A