diff options
Diffstat (limited to 'deps/icu-small/source/common/ucnvmbcs.cpp')
| -rw-r--r-- | deps/icu-small/source/common/ucnvmbcs.cpp | 5729 |
1 files changed, 5729 insertions, 0 deletions
diff --git a/deps/icu-small/source/common/ucnvmbcs.cpp b/deps/icu-small/source/common/ucnvmbcs.cpp new file mode 100644 index 0000000000..a3b1074453 --- /dev/null +++ b/deps/icu-small/source/common/ucnvmbcs.cpp @@ -0,0 +1,5729 @@ +/* +****************************************************************************** +* +* Copyright (C) 2000-2016, International Business Machines +* Corporation and others. All Rights Reserved. +* +****************************************************************************** +* file name: ucnvmbcs.cpp +* encoding: US-ASCII +* tab size: 8 (not used) +* indentation:4 +* +* created on: 2000jul03 +* created by: Markus W. Scherer +* +* The current code in this file replaces the previous implementation +* of conversion code from multi-byte codepages to Unicode and back. +* This implementation supports the following: +* - legacy variable-length codepages with up to 4 bytes per character +* - all Unicode code points (up to 0x10ffff) +* - efficient distinction of unassigned vs. illegal byte sequences +* - it is possible in fromUnicode() to directly deal with simple +* stateful encodings (used for EBCDIC_STATEFUL) +* - it is possible to convert Unicode code points +* to a single zero byte (but not as a fallback except for SBCS) +* +* Remaining limitations in fromUnicode: +* - byte sequences must not have leading zero bytes +* - except for SBCS codepages: no fallback mapping from Unicode to a zero byte +* - limitation to up to 4 bytes per character +* +* ICU 2.8 (late 2003) adds a secondary data structure which lifts some of these +* limitations and adds m:n character mappings and other features. +* See ucnv_ext.h for details. +* +* Change history: +* +* 5/6/2001 Ram Moved MBCS_SINGLE_RESULT_FROM_U,MBCS_STAGE_2_FROM_U, +* MBCS_VALUE_2_FROM_STAGE_2, MBCS_VALUE_4_FROM_STAGE_2 +* macros to ucnvmbcs.h file +*/ + +#include "unicode/utypes.h" + +#if !UCONFIG_NO_CONVERSION && !UCONFIG_NO_LEGACY_CONVERSION + +#include "unicode/ucnv.h" +#include "unicode/ucnv_cb.h" +#include "unicode/udata.h" +#include "unicode/uset.h" +#include "unicode/utf8.h" +#include "unicode/utf16.h" +#include "ucnv_bld.h" +#include "ucnvmbcs.h" +#include "ucnv_ext.h" +#include "ucnv_cnv.h" +#include "cmemory.h" +#include "cstring.h" +#include "umutex.h" + +/* control optimizations according to the platform */ +#define MBCS_UNROLL_SINGLE_TO_BMP 1 +#define MBCS_UNROLL_SINGLE_FROM_BMP 0 + +/* + * _MBCSHeader versions 5.3 & 4.3 + * (Note that the _MBCSHeader version is in addition to the converter formatVersion.) + * + * This version is optional. Version 5 is used for incompatible data format changes. + * makeconv will continue to generate version 4 files if possible. + * + * Changes from version 4: + * + * The main difference is an additional _MBCSHeader field with + * - the length (number of uint32_t) of the _MBCSHeader + * - flags for further incompatible data format changes + * - flags for further, backward compatible data format changes + * + * The MBCS_OPT_FROM_U flag indicates that most of the fromUnicode data is omitted from + * the file and needs to be reconstituted at load time. + * This requires a utf8Friendly format with an additional mbcsIndex table for fast + * (and UTF-8-friendly) fromUnicode conversion for Unicode code points up to maxFastUChar. + * (For details about these structures see below, and see ucnvmbcs.h.) + * + * utf8Friendly also implies that the fromUnicode mappings are stored in ascending order + * of the Unicode code points. (This requires that the .ucm file has the |0 etc. + * precision markers for all mappings.) + * + * All fallbacks have been moved to the extension table, leaving only roundtrips in the + * omitted data that can be reconstituted from the toUnicode data. + * + * Of the stage 2 table, the part corresponding to maxFastUChar and below is omitted. + * With only roundtrip mappings in the base fromUnicode data, this part is fully + * redundant with the mbcsIndex and will be reconstituted from that (also using the + * stage 1 table which contains the information about how stage 2 was compacted). + * + * The rest of the stage 2 table, the part for code points above maxFastUChar, + * is stored in the file and will be appended to the reconstituted part. + * + * The entire fromUBytes array is omitted from the file and will be reconstitued. + * This is done by enumerating all toUnicode roundtrip mappings, performing + * each mapping (using the stage 1 and reconstituted stage 2 tables) and + * writing instead of reading the byte values. + * + * _MBCSHeader version 4.3 + * + * Change from version 4.2: + * - Optional utf8Friendly data structures, with 64-entry stage 3 block + * allocation for parts of the BMP, and an additional mbcsIndex in non-SBCS + * files which can be used instead of stages 1 & 2. + * Faster lookups for roundtrips from most commonly used characters, + * and lookups from UTF-8 byte sequences with a natural bit distribution. + * See ucnvmbcs.h for more details. + * + * Change from version 4.1: + * - Added an optional extension table structure at the end of the .cnv file. + * It is present if the upper bits of the header flags field contains a non-zero + * byte offset to it. + * Files that contain only a conversion table and no base table + * use the special outputType MBCS_OUTPUT_EXT_ONLY. + * These contain the base table name between the MBCS header and the extension + * data. + * + * Change from version 4.0: + * - Replace header.reserved with header.fromUBytesLength so that all + * fields in the data have length. + * + * Changes from version 3 (for performance improvements): + * - new bit distribution for state table entries + * - reordered action codes + * - new data structure for single-byte fromUnicode + * + stage 2 only contains indexes + * + stage 3 stores 16 bits per character with classification bits 15..8 + * - no multiplier for stage 1 entries + * - stage 2 for non-single-byte codepages contains the index and the flags in + * one 32-bit value + * - 2-byte and 4-byte fromUnicode results are stored directly as 16/32-bit integers + * + * For more details about old versions of the MBCS data structure, see + * the corresponding versions of this file. + * + * Converting stateless codepage data ---------------------------------------*** + * (or codepage data with simple states) to Unicode. + * + * Data structure and algorithm for converting from complex legacy codepages + * to Unicode. (Designed before 2000-may-22.) + * + * The basic idea is that the structure of legacy codepages can be described + * with state tables. + * When reading a byte stream, each input byte causes a state transition. + * Some transitions result in the output of a code point, some result in + * "unassigned" or "illegal" output. + * This is used here for character conversion. + * + * The data structure begins with a state table consisting of a row + * per state, with 256 entries (columns) per row for each possible input + * byte value. + * Each entry is 32 bits wide, with two formats distinguished by + * the sign bit (bit 31): + * + * One format for transitional entries (bit 31 not set) for non-final bytes, and + * one format for final entries (bit 31 set). + * Both formats contain the number of the next state in the same bit + * positions. + * State 0 is the initial state. + * + * Most of the time, the offset values of subsequent states are added + * up to a scalar value. This value will eventually be the index of + * the Unicode code point in a table that follows the state table. + * The effect is that the code points for final state table rows + * are contiguous. The code points of final state rows follow each other + * in the order of the references to those final states by previous + * states, etc. + * + * For some terminal states, the offset is itself the output Unicode + * code point (16 bits for a BMP code point or 20 bits for a supplementary + * code point (stored as code point minus 0x10000 so that 20 bits are enough). + * For others, the code point in the Unicode table is stored with either + * one or two code units: one for BMP code points, two for a pair of + * surrogates. + * All code points for a final state entry take up the same number of code + * units, regardless of whether they all actually _use_ the same number + * of code units. This is necessary for simple array access. + * + * An additional feature comes in with what in ICU is called "fallback" + * mappings: + * + * In addition to round-trippable, precise, 1:1 mappings, there are often + * mappings defined between similar, though not the same, characters. + * Typically, such mappings occur only in fromUnicode mapping tables because + * Unicode has a superset repertoire of most other codepages. However, it + * is possible to provide such mappings in the toUnicode tables, too. + * In this case, the fallback mappings are partly integrated into the + * general state tables because the structure of the encoding includes their + * byte sequences. + * For final entries in an initial state, fallback mappings are stored in + * the entry itself like with roundtrip mappings. + * For other final entries, they are stored in the code units table if + * the entry is for a pair of code units. + * For single-unit results in the code units table, there is no space to + * alternatively hold a fallback mapping; in this case, the code unit + * is stored as U+fffe (unassigned), and the fallback mapping needs to + * be looked up by the scalar offset value in a separate table. + * + * "Unassigned" state entries really mean "structurally unassigned", + * i.e., such a byte sequence will never have a mapping result. + * + * The interpretation of the bits in each entry is as follows: + * + * Bit 31 not set, not a terminal entry ("transitional"): + * 30..24 next state + * 23..0 offset delta, to be added up + * + * Bit 31 set, terminal ("final") entry: + * 30..24 next state (regardless of action code) + * 23..20 action code: + * action codes 0 and 1 result in precise-mapping Unicode code points + * 0 valid byte sequence + * 19..16 not used, 0 + * 15..0 16-bit Unicode BMP code point + * never U+fffe or U+ffff + * 1 valid byte sequence + * 19..0 20-bit Unicode supplementary code point + * never U+fffe or U+ffff + * + * action codes 2 and 3 result in fallback (unidirectional-mapping) Unicode code points + * 2 valid byte sequence (fallback) + * 19..16 not used, 0 + * 15..0 16-bit Unicode BMP code point as fallback result + * 3 valid byte sequence (fallback) + * 19..0 20-bit Unicode supplementary code point as fallback result + * + * action codes 4 and 5 may result in roundtrip/fallback/unassigned/illegal results + * depending on the code units they result in + * 4 valid byte sequence + * 19..9 not used, 0 + * 8..0 final offset delta + * pointing to one 16-bit code unit which may be + * fffe unassigned -- look for a fallback for this offset + * ffff illegal + * 5 valid byte sequence + * 19..9 not used, 0 + * 8..0 final offset delta + * pointing to two 16-bit code units + * (typically UTF-16 surrogates) + * the result depends on the first code unit as follows: + * 0000..d7ff roundtrip BMP code point (1st alone) + * d800..dbff roundtrip surrogate pair (1st, 2nd) + * dc00..dfff fallback surrogate pair (1st-400, 2nd) + * e000 roundtrip BMP code point (2nd alone) + * e001 fallback BMP code point (2nd alone) + * fffe unassigned + * ffff illegal + * (the final offset deltas are at most 255 * 2, + * times 2 because of storing code unit pairs) + * + * 6 unassigned byte sequence + * 19..16 not used, 0 + * 15..0 16-bit Unicode BMP code point U+fffe (new with version 2) + * this does not contain a final offset delta because the main + * purpose of this action code is to save scalar offset values; + * therefore, fallback values cannot be assigned to byte + * sequences that result in this action code + * 7 illegal byte sequence + * 19..16 not used, 0 + * 15..0 16-bit Unicode BMP code point U+ffff (new with version 2) + * 8 state change only + * 19..0 not used, 0 + * useful for state changes in simple stateful encodings, + * at Shift-In/Shift-Out codes + * + * + * 9..15 reserved for future use + * current implementations will only perform a state change + * and ignore bits 19..0 + * + * An encoding with contiguous ranges of unassigned byte sequences, like + * Shift-JIS and especially EUC-TW, can be stored efficiently by having + * at least two states for the trail bytes: + * One trail byte state that results in code points, and one that only + * has "unassigned" and "illegal" terminal states. + * + * Note: partly by accident, this data structure supports simple stateful + * encodings without any additional logic. + * Currently, only simple Shift-In/Shift-Out schemes are handled with + * appropriate state tables (especially EBCDIC_STATEFUL!). + * + * MBCS version 2 added: + * unassigned and illegal action codes have U+fffe and U+ffff + * instead of unused bits; this is useful for _MBCS_SINGLE_SIMPLE_GET_NEXT_BMP() + * + * Converting from Unicode to codepage bytes --------------------------------*** + * + * The conversion data structure for fromUnicode is designed for the known + * structure of Unicode. It maps from 21-bit code points (0..0x10ffff) to + * a sequence of 1..4 bytes, in addition to a flag that indicates if there is + * a roundtrip mapping. + * + * The lookup is done with a 3-stage trie, using 11/6/4 bits for stage 1/2/3 + * like in the character properties table. + * The beginning of the trie is at offsetFromUTable, the beginning of stage 3 + * with the resulting bytes is at offsetFromUBytes. + * + * Beginning with version 4, single-byte codepages have a significantly different + * trie compared to other codepages. + * In all cases, the entry in stage 1 is directly the index of the block of + * 64 entries in stage 2. + * + * Single-byte lookup: + * + * Stage 2 only contains 16-bit indexes directly to the 16-blocks in stage 3. + * Stage 3 contains one 16-bit word per result: + * Bits 15..8 indicate the kind of result: + * f roundtrip result + * c fallback result from private-use code point + * 8 fallback result from other code points + * 0 unassigned + * Bits 7..0 contain the codepage byte. A zero byte is always possible. + * + * In version 4.3, the runtime code can build an sbcsIndex for a utf8Friendly + * file. For 2-byte UTF-8 byte sequences and some 3-byte sequences the lookup + * becomes a 2-stage (single-index) trie lookup with 6 bits for stage 3. + * ASCII code points can be looked up with a linear array access into stage 3. + * See maxFastUChar and other details in ucnvmbcs.h. + * + * Multi-byte lookup: + * + * Stage 2 contains a 32-bit word for each 16-block in stage 3: + * Bits 31..16 contain flags for which stage 3 entries contain roundtrip results + * test: MBCS_FROM_U_IS_ROUNDTRIP(stage2Entry, c) + * If this test is false, then a non-zero result will be interpreted as + * a fallback mapping. + * Bits 15..0 contain the index to stage 3, which must be multiplied by 16*(bytes per char) + * + * Stage 3 contains 2, 3, or 4 bytes per result. + * 2 or 4 bytes are stored as uint16_t/uint32_t in platform endianness, + * while 3 bytes are stored as bytes in big-endian order. + * Leading zero bytes are ignored, and the number of bytes is counted. + * A zero byte mapping result is possible as a roundtrip result. + * For some output types, the actual result is processed from this; + * see ucnv_MBCSFromUnicodeWithOffsets(). + * + * Note that stage 1 always contains 0x440=1088 entries (0x440==0x110000>>10), + * or (version 3 and up) for BMP-only codepages, it contains 64 entries. + * + * In version 4.3, a utf8Friendly file contains an mbcsIndex table. + * For 2-byte UTF-8 byte sequences and most 3-byte sequences the lookup + * becomes a 2-stage (single-index) trie lookup with 6 bits for stage 3. + * ASCII code points can be looked up with a linear array access into stage 3. + * See maxFastUChar, mbcsIndex and other details in ucnvmbcs.h. + * + * In version 3, stage 2 blocks may overlap by multiples of the multiplier + * for compaction. + * In version 4, stage 2 blocks (and for single-byte codepages, stage 3 blocks) + * may overlap by any number of entries. + * + * MBCS version 2 added: + * the converter checks for known output types, which allows + * adding new ones without crashing an unaware converter + */ + +/** + * Callback from ucnv_MBCSEnumToUnicode(), takes 32 mappings from + * consecutive sequences of bytes, starting from the one encoded in value, + * to Unicode code points. (Multiple mappings to reduce per-function call overhead.) + * Does not currently support m:n mappings or reverse fallbacks. + * This function will not be called for sequences of bytes with leading zeros. + * + * @param context an opaque pointer, as passed into ucnv_MBCSEnumToUnicode() + * @param value contains 1..4 bytes of the first byte sequence, right-aligned + * @param codePoints resulting Unicode code points, or negative if a byte sequence does + * not map to anything + * @return TRUE to continue enumeration, FALSE to stop + */ +typedef UBool U_CALLCONV +UConverterEnumToUCallback(const void *context, uint32_t value, UChar32 codePoints[32]); + +static void +ucnv_MBCSLoad(UConverterSharedData *sharedData, + UConverterLoadArgs *pArgs, + const uint8_t *raw, + UErrorCode *pErrorCode); + +static void +ucnv_MBCSUnload(UConverterSharedData *sharedData); + +static void +ucnv_MBCSOpen(UConverter *cnv, + UConverterLoadArgs *pArgs, + UErrorCode *pErrorCode); + +static UChar32 +ucnv_MBCSGetNextUChar(UConverterToUnicodeArgs *pArgs, + UErrorCode *pErrorCode); + +static void +ucnv_MBCSGetStarters(const UConverter* cnv, + UBool starters[256], + UErrorCode *pErrorCode); + +static const char * +ucnv_MBCSGetName(const UConverter *cnv); + +static void +ucnv_MBCSWriteSub(UConverterFromUnicodeArgs *pArgs, + int32_t offsetIndex, + UErrorCode *pErrorCode); + +static UChar32 +ucnv_MBCSGetNextUChar(UConverterToUnicodeArgs *pArgs, + UErrorCode *pErrorCode); + +static void +ucnv_SBCSFromUTF8(UConverterFromUnicodeArgs *pFromUArgs, + UConverterToUnicodeArgs *pToUArgs, + UErrorCode *pErrorCode); + +static void +ucnv_MBCSGetUnicodeSet(const UConverter *cnv, + const USetAdder *sa, + UConverterUnicodeSet which, + UErrorCode *pErrorCode); + +static void +ucnv_DBCSFromUTF8(UConverterFromUnicodeArgs *pFromUArgs, + UConverterToUnicodeArgs *pToUArgs, + UErrorCode *pErrorCode); + +static const UConverterImpl _SBCSUTF8Impl={ + UCNV_MBCS, + + ucnv_MBCSLoad, + ucnv_MBCSUnload, + + ucnv_MBCSOpen, + NULL, + NULL, + + ucnv_MBCSToUnicodeWithOffsets, + ucnv_MBCSToUnicodeWithOffsets, + ucnv_MBCSFromUnicodeWithOffsets, + ucnv_MBCSFromUnicodeWithOffsets, + ucnv_MBCSGetNextUChar, + + ucnv_MBCSGetStarters, + ucnv_MBCSGetName, + ucnv_MBCSWriteSub, + NULL, + ucnv_MBCSGetUnicodeSet, + + NULL, + ucnv_SBCSFromUTF8 +}; + +static const UConverterImpl _DBCSUTF8Impl={ + UCNV_MBCS, + + ucnv_MBCSLoad, + ucnv_MBCSUnload, + + ucnv_MBCSOpen, + NULL, + NULL, + + ucnv_MBCSToUnicodeWithOffsets, + ucnv_MBCSToUnicodeWithOffsets, + ucnv_MBCSFromUnicodeWithOffsets, + ucnv_MBCSFromUnicodeWithOffsets, + ucnv_MBCSGetNextUChar, + + ucnv_MBCSGetStarters, + ucnv_MBCSGetName, + ucnv_MBCSWriteSub, + NULL, + ucnv_MBCSGetUnicodeSet, + + NULL, + ucnv_DBCSFromUTF8 +}; + +static const UConverterImpl _MBCSImpl={ + UCNV_MBCS, + + ucnv_MBCSLoad, + ucnv_MBCSUnload, + + ucnv_MBCSOpen, + NULL, + NULL, + + ucnv_MBCSToUnicodeWithOffsets, + ucnv_MBCSToUnicodeWithOffsets, + ucnv_MBCSFromUnicodeWithOffsets, + ucnv_MBCSFromUnicodeWithOffsets, + ucnv_MBCSGetNextUChar, + + ucnv_MBCSGetStarters, + ucnv_MBCSGetName, + ucnv_MBCSWriteSub, + NULL, + ucnv_MBCSGetUnicodeSet, + NULL, + NULL +}; + + +/* Static data is in tools/makeconv/ucnvstat.c for data-based + * converters. Be sure to update it as well. + */ + +const UConverterSharedData _MBCSData={ + sizeof(UConverterSharedData), 1, + NULL, NULL, FALSE, TRUE, &_MBCSImpl, + 0, UCNV_MBCS_TABLE_INITIALIZER +}; + + +/* GB 18030 data ------------------------------------------------------------ */ + +/* helper macros for linear values for GB 18030 four-byte sequences */ +#define LINEAR_18030(a, b, c, d) ((((a)*10+(b))*126L+(c))*10L+(d)) + +#define LINEAR_18030_BASE LINEAR_18030(0x81, 0x30, 0x81, 0x30) + +#define LINEAR(x) LINEAR_18030(x>>24, (x>>16)&0xff, (x>>8)&0xff, x&0xff) + +/* + * Some ranges of GB 18030 where both the Unicode code points and the + * GB four-byte sequences are contiguous and are handled algorithmically by + * the special callback functions below. + * The values are start & end of Unicode & GB codes. + * + * Note that single surrogates are not mapped by GB 18030 + * as of the re-released mapping tables from 2000-nov-30. + */ +static const uint32_t +gb18030Ranges[14][4]={ + {0x10000, 0x10FFFF, LINEAR(0x90308130), LINEAR(0xE3329A35)}, + {0x9FA6, 0xD7FF, LINEAR(0x82358F33), LINEAR(0x8336C738)}, + {0x0452, 0x1E3E, LINEAR(0x8130D330), LINEAR(0x8135F436)}, + {0x1E40, 0x200F, LINEAR(0x8135F438), LINEAR(0x8136A531)}, + {0xE865, 0xF92B, LINEAR(0x8336D030), LINEAR(0x84308534)}, + {0x2643, 0x2E80, LINEAR(0x8137A839), LINEAR(0x8138FD38)}, + {0xFA2A, 0xFE2F, LINEAR(0x84309C38), LINEAR(0x84318537)}, + {0x3CE1, 0x4055, LINEAR(0x8231D438), LINEAR(0x8232AF32)}, + {0x361B, 0x3917, LINEAR(0x8230A633), LINEAR(0x8230F237)}, + {0x49B8, 0x4C76, LINEAR(0x8234A131), LINEAR(0x8234E733)}, + {0x4160, 0x4336, LINEAR(0x8232C937), LINEAR(0x8232F837)}, + {0x478E, 0x4946, LINEAR(0x8233E838), LINEAR(0x82349638)}, + {0x44D7, 0x464B, LINEAR(0x8233A339), LINEAR(0x8233C931)}, + {0xFFE6, 0xFFFF, LINEAR(0x8431A234), LINEAR(0x8431A439)} +}; + +/* bit flag for UConverter.options indicating GB 18030 special handling */ +#define _MBCS_OPTION_GB18030 0x8000 + +/* bit flag for UConverter.options indicating KEIS,JEF,JIF special handling */ +#define _MBCS_OPTION_KEIS 0x01000 +#define _MBCS_OPTION_JEF 0x02000 +#define _MBCS_OPTION_JIPS 0x04000 + +#define KEIS_SO_CHAR_1 0x0A +#define KEIS_SO_CHAR_2 0x42 +#define KEIS_SI_CHAR_1 0x0A +#define KEIS_SI_CHAR_2 0x41 + +#define JEF_SO_CHAR 0x28 +#define JEF_SI_CHAR 0x29 + +#define JIPS_SO_CHAR_1 0x1A +#define JIPS_SO_CHAR_2 0x70 +#define JIPS_SI_CHAR_1 0x1A +#define JIPS_SI_CHAR_2 0x71 + +enum SISO_Option { + SI, + SO +}; +typedef enum SISO_Option SISO_Option; + +static int32_t getSISOBytes(SISO_Option option, uint32_t cnvOption, uint8_t *value) { + int32_t SISOLength = 0; + + switch (option) { + case SI: + if ((cnvOption&_MBCS_OPTION_KEIS)!=0) { + value[0] = KEIS_SI_CHAR_1; + value[1] = KEIS_SI_CHAR_2; + SISOLength = 2; + } else if ((cnvOption&_MBCS_OPTION_JEF)!=0) { + value[0] = JEF_SI_CHAR; + SISOLength = 1; + } else if ((cnvOption&_MBCS_OPTION_JIPS)!=0) { + value[0] = JIPS_SI_CHAR_1; + value[1] = JIPS_SI_CHAR_2; + SISOLength = 2; + } else { + value[0] = UCNV_SI; + SISOLength = 1; + } + break; + case SO: + if ((cnvOption&_MBCS_OPTION_KEIS)!=0) { + value[0] = KEIS_SO_CHAR_1; + value[1] = KEIS_SO_CHAR_2; + SISOLength = 2; + } else if ((cnvOption&_MBCS_OPTION_JEF)!=0) { + value[0] = JEF_SO_CHAR; + SISOLength = 1; + } else if ((cnvOption&_MBCS_OPTION_JIPS)!=0) { + value[0] = JIPS_SO_CHAR_1; + value[1] = JIPS_SO_CHAR_2; + SISOLength = 2; + } else { + value[0] = UCNV_SO; + SISOLength = 1; + } + break; + default: + /* Should never happen. */ + break; + } + + return SISOLength; +} + +/* Miscellaneous ------------------------------------------------------------ */ + +/* similar to ucnv_MBCSGetNextUChar() but recursive */ +static UBool +enumToU(UConverterMBCSTable *mbcsTable, int8_t stateProps[], + int32_t state, uint32_t offset, + uint32_t value, + UConverterEnumToUCallback *callback, const void *context, + UErrorCode *pErrorCode) { + UChar32 codePoints[32]; + const int32_t *row; + const uint16_t *unicodeCodeUnits; + UChar32 anyCodePoints; + int32_t b, limit; + + row=mbcsTable->stateTable[state]; + unicodeCodeUnits=mbcsTable->unicodeCodeUnits; + + value<<=8; + anyCodePoints=-1; /* becomes non-negative if there is a mapping */ + + b=(stateProps[state]&0x38)<<2; + if(b==0 && stateProps[state]>=0x40) { + /* skip byte sequences with leading zeros because they are not stored in the fromUnicode table */ + codePoints[0]=U_SENTINEL; + b=1; + } + limit=((stateProps[state]&7)+1)<<5; + while(b<limit) { + int32_t entry=row[b]; + if(MBCS_ENTRY_IS_TRANSITION(entry)) { + int32_t nextState=MBCS_ENTRY_TRANSITION_STATE(entry); + if(stateProps[nextState]>=0) { + /* recurse to a state with non-ignorable actions */ + if(!enumToU( + mbcsTable, stateProps, nextState, + offset+MBCS_ENTRY_TRANSITION_OFFSET(entry), + value|(uint32_t)b, + callback, context, + pErrorCode)) { + return FALSE; + } + } + codePoints[b&0x1f]=U_SENTINEL; + } else { + UChar32 c; + int32_t action; + + /* + * An if-else-if chain provides more reliable performance for + * the most common cases compared to a switch. + */ + action=MBCS_ENTRY_FINAL_ACTION(entry); + if(action==MBCS_STATE_VALID_DIRECT_16) { + /* output BMP code point */ + c=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + } else if(action==MBCS_STATE_VALID_16) { + int32_t finalOffset=offset+MBCS_ENTRY_FINAL_VALUE_16(entry); + c=unicodeCodeUnits[finalOffset]; + if(c<0xfffe) { + /* output BMP code point */ + } else { + c=U_SENTINEL; + } + } else if(action==MBCS_STATE_VALID_16_PAIR) { + int32_t finalOffset=offset+MBCS_ENTRY_FINAL_VALUE_16(entry); + c=unicodeCodeUnits[finalOffset++]; + if(c<0xd800) { + /* output BMP code point below 0xd800 */ + } else if(c<=0xdbff) { + /* output roundtrip or fallback supplementary code point */ + c=((c&0x3ff)<<10)+unicodeCodeUnits[finalOffset]+(0x10000-0xdc00); + } else if(c==0xe000) { + /* output roundtrip BMP code point above 0xd800 or fallback BMP code point */ + c=unicodeCodeUnits[finalOffset]; + } else { + c=U_SENTINEL; + } + } else if(action==MBCS_STATE_VALID_DIRECT_20) { + /* output supplementary code point */ + c=(UChar32)(MBCS_ENTRY_FINAL_VALUE(entry)+0x10000); + } else { + c=U_SENTINEL; + } + + codePoints[b&0x1f]=c; + anyCodePoints&=c; + } + if(((++b)&0x1f)==0) { + if(anyCodePoints>=0) { + if(!callback(context, value|(uint32_t)(b-0x20), codePoints)) { + return FALSE; + } + anyCodePoints=-1; + } + } + } + return TRUE; +} + +/* + * Only called if stateProps[state]==-1. + * A recursive call may do stateProps[state]|=0x40 if this state is the target of an + * MBCS_STATE_CHANGE_ONLY. + */ +static int8_t +getStateProp(const int32_t (*stateTable)[256], int8_t stateProps[], int state) { + const int32_t *row; + int32_t min, max, entry, nextState; + + row=stateTable[state]; + stateProps[state]=0; + + /* find first non-ignorable state */ + for(min=0;; ++min) { + entry=row[min]; + nextState=MBCS_ENTRY_STATE(entry); + if(stateProps[nextState]==-1) { + getStateProp(stateTable, stateProps, nextState); + } + if(MBCS_ENTRY_IS_TRANSITION(entry)) { + if(stateProps[nextState]>=0) { + break; + } + } else if(MBCS_ENTRY_FINAL_ACTION(entry)<MBCS_STATE_UNASSIGNED) { + break; + } + if(min==0xff) { + stateProps[state]=-0x40; /* (int8_t)0xc0 */ + return stateProps[state]; + } + } + stateProps[state]|=(int8_t)((min>>5)<<3); + + /* find last non-ignorable state */ + for(max=0xff; min<max; --max) { + entry=row[max]; + nextState=MBCS_ENTRY_STATE(entry); + if(stateProps[nextState]==-1) { + getStateProp(stateTable, stateProps, nextState); + } + if(MBCS_ENTRY_IS_TRANSITION(entry)) { + if(stateProps[nextState]>=0) { + break; + } + } else if(MBCS_ENTRY_FINAL_ACTION(entry)<MBCS_STATE_UNASSIGNED) { + break; + } + } + stateProps[state]|=(int8_t)(max>>5); + + /* recurse further and collect direct-state information */ + while(min<=max) { + entry=row[min]; + nextState=MBCS_ENTRY_STATE(entry); + if(stateProps[nextState]==-1) { + getStateProp(stateTable, stateProps, nextState); + } + if(MBCS_ENTRY_IS_FINAL(entry)) { + stateProps[nextState]|=0x40; + if(MBCS_ENTRY_FINAL_ACTION(entry)<=MBCS_STATE_FALLBACK_DIRECT_20) { + stateProps[state]|=0x40; + } + } + ++min; + } + return stateProps[state]; +} + +/* + * Internal function enumerating the toUnicode data of an MBCS converter. + * Currently only used for reconstituting data for a MBCS_OPT_NO_FROM_U + * table, but could also be used for a future ucnv_getUnicodeSet() option + * that includes reverse fallbacks (after updating this function's implementation). + * Currently only handles roundtrip mappings. + * Does not currently handle extensions. + */ +static void +ucnv_MBCSEnumToUnicode(UConverterMBCSTable *mbcsTable, + UConverterEnumToUCallback *callback, const void *context, + UErrorCode *pErrorCode) { + /* + * Properties for each state, to speed up the enumeration. + * Ignorable actions are unassigned/illegal/state-change-only: + * They do not lead to mappings. + * + * Bits 7..6: + * 1 direct/initial state (stateful converters have multiple) + * 0 non-initial state with transitions or with non-ignorable result actions + * -1 final state with only ignorable actions + * + * Bits 5..3: + * The lowest byte value with non-ignorable actions is + * value<<5 (rounded down). + * + * Bits 2..0: + * The highest byte value with non-ignorable actions is + * (value<<5)&0x1f (rounded up). + */ + int8_t stateProps[MBCS_MAX_STATE_COUNT]; + int32_t state; + + uprv_memset(stateProps, -1, sizeof(stateProps)); + + /* recurse from state 0 and set all stateProps */ + getStateProp(mbcsTable->stateTable, stateProps, 0); + + for(state=0; state<mbcsTable->countStates; ++state) { + /*if(stateProps[state]==-1) { + printf("unused/unreachable <icu:state> %d\n", state); + }*/ + if(stateProps[state]>=0x40) { + /* start from each direct state */ + enumToU( + mbcsTable, stateProps, state, 0, 0, + callback, context, + pErrorCode); + } + } +} + +U_CFUNC void +ucnv_MBCSGetFilteredUnicodeSetForUnicode(const UConverterSharedData *sharedData, + const USetAdder *sa, + UConverterUnicodeSet which, + UConverterSetFilter filter, + UErrorCode *pErrorCode) { + const UConverterMBCSTable *mbcsTable; + const uint16_t *table; + + uint32_t st3; + uint16_t st1, maxStage1, st2; + + UChar32 c; + + /* enumerate the from-Unicode trie table */ + mbcsTable=&sharedData->mbcs; + table=mbcsTable->fromUnicodeTable; + if(mbcsTable->unicodeMask&UCNV_HAS_SUPPLEMENTARY) { + maxStage1=0x440; + } else { + maxStage1=0x40; + } + + c=0; /* keep track of the current code point while enumerating */ + + if(mbcsTable->outputType==MBCS_OUTPUT_1) { + const uint16_t *stage2, *stage3, *results; + uint16_t minValue; + + results=(const uint16_t *)mbcsTable->fromUnicodeBytes; + + /* + * Set a threshold variable for selecting which mappings to use. + * See ucnv_MBCSSingleFromBMPWithOffsets() and + * MBCS_SINGLE_RESULT_FROM_U() for details. + */ + if(which==UCNV_ROUNDTRIP_SET) { + /* use only roundtrips */ + minValue=0xf00; + } else /* UCNV_ROUNDTRIP_AND_FALLBACK_SET */ { + /* use all roundtrip and fallback results */ + minValue=0x800; + } + + for(st1=0; st1<maxStage1; ++st1) { + st2=table[st1]; + if(st2>maxStage1) { + stage2=table+st2; + for(st2=0; st2<64; ++st2) { + if((st3=stage2[st2])!=0) { + /* read the stage 3 block */ + stage3=results+st3; + + do { + if(*stage3++>=minValue) { + sa->add(sa->set, c); + } + } while((++c&0xf)!=0); + } else { + c+=16; /* empty stage 3 block */ + } + } + } else { + c+=1024; /* empty stage 2 block */ + } + } + } else { + const uint32_t *stage2; + const uint8_t *stage3, *bytes; + uint32_t st3Multiplier; + uint32_t value; + UBool useFallback; + + bytes=mbcsTable->fromUnicodeBytes; + + useFallback=(UBool)(which==UCNV_ROUNDTRIP_AND_FALLBACK_SET); + + switch(mbcsTable->outputType) { + case MBCS_OUTPUT_3: + case MBCS_OUTPUT_4_EUC: + st3Multiplier=3; + break; + case MBCS_OUTPUT_4: + st3Multiplier=4; + break; + default: + st3Multiplier=2; + break; + } + + for(st1=0; st1<maxStage1; ++st1) { + st2=table[st1]; + if(st2>(maxStage1>>1)) { + stage2=(const uint32_t *)table+st2; + for(st2=0; st2<64; ++st2) { + if((st3=stage2[st2])!=0) { + /* read the stage 3 block */ + stage3=bytes+st3Multiplier*16*(uint32_t)(uint16_t)st3; + + /* get the roundtrip flags for the stage 3 block */ + st3>>=16; + + /* + * Add code points for which the roundtrip flag is set, + * or which map to non-zero bytes if we use fallbacks. + * See ucnv_MBCSFromUnicodeWithOffsets() for details. + */ + switch(filter) { + case UCNV_SET_FILTER_NONE: + do { + if(st3&1) { + sa->add(sa->set, c); + stage3+=st3Multiplier; + } else if(useFallback) { + uint8_t b=0; + switch(st3Multiplier) { + case 4: + b|=*stage3++; + U_FALLTHROUGH; + case 3: + b|=*stage3++; + U_FALLTHROUGH; + case 2: + b|=stage3[0]|stage3[1]; + stage3+=2; + U_FALLTHROUGH; + default: + break; + } + if(b!=0) { + sa->add(sa->set, c); + } + } + st3>>=1; + } while((++c&0xf)!=0); + break; + case UCNV_SET_FILTER_DBCS_ONLY: + /* Ignore single-byte results (<0x100). */ + do { + if(((st3&1)!=0 || useFallback) && *((const uint16_t *)stage3)>=0x100) { + sa->add(sa->set, c); + } + st3>>=1; + stage3+=2; /* +=st3Multiplier */ + } while((++c&0xf)!=0); + break; + case UCNV_SET_FILTER_2022_CN: + /* Only add code points that map to CNS 11643 planes 1 & 2 for non-EXT ISO-2022-CN. */ + do { + if(((st3&1)!=0 || useFallback) && ((value=*stage3)==0x81 || value==0x82)) { + sa->add(sa->set, c); + } + st3>>=1; + stage3+=3; /* +=st3Multiplier */ + } while((++c&0xf)!=0); + break; + case UCNV_SET_FILTER_SJIS: + /* Only add code points that map to Shift-JIS codes corresponding to JIS X 0208. */ + do { + if(((st3&1)!=0 || useFallback) && (value=*((const uint16_t *)stage3))>=0x8140 && value<=0xeffc) { + sa->add(sa->set, c); + } + st3>>=1; + stage3+=2; /* +=st3Multiplier */ + } while((++c&0xf)!=0); + break; + case UCNV_SET_FILTER_GR94DBCS: + /* Only add code points that map to ISO 2022 GR 94 DBCS codes (each byte A1..FE). */ + do { + if( ((st3&1)!=0 || useFallback) && + (uint16_t)((value=*((const uint16_t *)stage3)) - 0xa1a1)<=(0xfefe - 0xa1a1) && + (uint8_t)(value-0xa1)<=(0xfe - 0xa1) + ) { + sa->add(sa->set, c); + } + st3>>=1; + stage3+=2; /* +=st3Multiplier */ + } while((++c&0xf)!=0); + break; + case UCNV_SET_FILTER_HZ: + /* Only add code points that are suitable for HZ DBCS (lead byte A1..FD). */ + do { + if( ((st3&1)!=0 || useFallback) && + (uint16_t)((value=*((const uint16_t *)stage3))-0xa1a1)<=(0xfdfe - 0xa1a1) && + (uint8_t)(value-0xa1)<=(0xfe - 0xa1) + ) { + sa->add(sa->set, c); + } + st3>>=1; + stage3+=2; /* +=st3Multiplier */ + } while((++c&0xf)!=0); + break; + default: + *pErrorCode=U_INTERNAL_PROGRAM_ERROR; + return; + } + } else { + c+=16; /* empty stage 3 block */ + } + } + } else { + c+=1024; /* empty stage 2 block */ + } + } + } + + ucnv_extGetUnicodeSet(sharedData, sa, which, filter, pErrorCode); +} + +U_CFUNC void +ucnv_MBCSGetUnicodeSetForUnicode(const UConverterSharedData *sharedData, + const USetAdder *sa, + UConverterUnicodeSet which, + UErrorCode *pErrorCode) { + ucnv_MBCSGetFilteredUnicodeSetForUnicode( + sharedData, sa, which, + sharedData->mbcs.outputType==MBCS_OUTPUT_DBCS_ONLY ? + UCNV_SET_FILTER_DBCS_ONLY : + UCNV_SET_FILTER_NONE, + pErrorCode); +} + +static void +ucnv_MBCSGetUnicodeSet(const UConverter *cnv, + const USetAdder *sa, + UConverterUnicodeSet which, + UErrorCode *pErrorCode) { + if(cnv->options&_MBCS_OPTION_GB18030) { + sa->addRange(sa->set, 0, 0xd7ff); + sa->addRange(sa->set, 0xe000, 0x10ffff); + } else { + ucnv_MBCSGetUnicodeSetForUnicode(cnv->sharedData, sa, which, pErrorCode); + } +} + +/* conversion extensions for input not in the main table -------------------- */ + +/* + * Hardcoded extension handling for GB 18030. + * Definition of LINEAR macros and gb18030Ranges see near the beginning of the file. + * + * In the future, conversion extensions may handle m:n mappings and delta tables, + * see http://source.icu-project.org/repos/icu/icuhtml/trunk/design/conversion/conversion_extensions.html + * + * If an input character cannot be mapped, then these functions set an error + * code. The framework will then call the callback function. + */ + +/* + * @return if(U_FAILURE) return the code point for cnv->fromUChar32 + * else return 0 after output has been written to the target + */ +static UChar32 +_extFromU(UConverter *cnv, const UConverterSharedData *sharedData, + UChar32 cp, + const UChar **source, const UChar *sourceLimit, + uint8_t **target, const uint8_t *targetLimit, + int32_t **offsets, int32_t sourceIndex, + UBool flush, + UErrorCode *pErrorCode) { + const int32_t *cx; + + cnv->useSubChar1=FALSE; + + if( (cx=sharedData->mbcs.extIndexes)!=NULL && + ucnv_extInitialMatchFromU( + cnv, cx, + cp, source, sourceLimit, + (char **)target, (char *)targetLimit, + offsets, sourceIndex, + flush, + pErrorCode) + ) { + return 0; /* an extension mapping handled the input */ + } + + /* GB 18030 */ + if((cnv->options&_MBCS_OPTION_GB18030)!=0) { + const uint32_t *range; + int32_t i; + + range=gb18030Ranges[0]; + for(i=0; i<UPRV_LENGTHOF(gb18030Ranges); range+=4, ++i) { + if(range[0]<=(uint32_t)cp && (uint32_t)cp<=range[1]) { + /* found the Unicode code point, output the four-byte sequence for it */ + uint32_t linear; + char bytes[4]; + + /* get the linear value of the first GB 18030 code in this range */ + linear=range[2]-LINEAR_18030_BASE; + + /* add the offset from the beginning of the range */ + linear+=((uint32_t)cp-range[0]); + + /* turn this into a four-byte sequence */ + bytes[3]=(char)(0x30+linear%10); linear/=10; + bytes[2]=(char)(0x81+linear%126); linear/=126; + bytes[1]=(char)(0x30+linear%10); linear/=10; + bytes[0]=(char)(0x81+linear); + + /* output this sequence */ + ucnv_fromUWriteBytes(cnv, + bytes, 4, (char **)target, (char *)targetLimit, + offsets, sourceIndex, pErrorCode); + return 0; + } + } + } + + /* no mapping */ + *pErrorCode=U_INVALID_CHAR_FOUND; + return cp; +} + +/* + * Input sequence: cnv->toUBytes[0..length[ + * @return if(U_FAILURE) return the length (toULength, byteIndex) for the input + * else return 0 after output has been written to the target + */ +static int8_t +_extToU(UConverter *cnv, const UConverterSharedData *sharedData, + int8_t length, + const uint8_t **source, const uint8_t *sourceLimit, + UChar **target, const UChar *targetLimit, + int32_t **offsets, int32_t sourceIndex, + UBool flush, + UErrorCode *pErrorCode) { + const int32_t *cx; + + if( (cx=sharedData->mbcs.extIndexes)!=NULL && + ucnv_extInitialMatchToU( + cnv, cx, + length, (const char **)source, (const char *)sourceLimit, + target, targetLimit, + offsets, sourceIndex, + flush, + pErrorCode) + ) { + return 0; /* an extension mapping handled the input */ + } + + /* GB 18030 */ + if(length==4 && (cnv->options&_MBCS_OPTION_GB18030)!=0) { + const uint32_t *range; + uint32_t linear; + int32_t i; + + linear=LINEAR_18030(cnv->toUBytes[0], cnv->toUBytes[1], cnv->toUBytes[2], cnv->toUBytes[3]); + range=gb18030Ranges[0]; + for(i=0; i<UPRV_LENGTHOF(gb18030Ranges); range+=4, ++i) { + if(range[2]<=linear && linear<=range[3]) { + /* found the sequence, output the Unicode code point for it */ + *pErrorCode=U_ZERO_ERROR; + + /* add the linear difference between the input and start sequences to the start code point */ + linear=range[0]+(linear-range[2]); + + /* output this code point */ + ucnv_toUWriteCodePoint(cnv, linear, target, targetLimit, offsets, sourceIndex, pErrorCode); + + return 0; + } + } + } + + /* no mapping */ + *pErrorCode=U_INVALID_CHAR_FOUND; + return length; +} + +/* EBCDIC swap LF<->NL ------------------------------------------------------ */ + +/* + * This code modifies a standard EBCDIC<->Unicode mapping table for + * OS/390 (z/OS) Unix System Services (Open Edition). + * The difference is in the mapping of Line Feed and New Line control codes: + * Standard EBCDIC maps + * + * <U000A> \x25 |0 + * <U0085> \x15 |0 + * + * but OS/390 USS EBCDIC swaps the control codes for LF and NL, + * mapping + * + * <U000A> \x15 |0 + * <U0085> \x25 |0 + * + * This code modifies a loaded standard EBCDIC<->Unicode mapping table + * by copying it into allocated memory and swapping the LF and NL values. + * It allows to support the same EBCDIC charset in both versions without + * duplicating the entire installed table. + */ + +/* standard EBCDIC codes */ +#define EBCDIC_LF 0x25 +#define EBCDIC_NL 0x15 + +/* standard EBCDIC codes with roundtrip flag as stored in Unicode-to-single-byte tables */ +#define EBCDIC_RT_LF 0xf25 +#define EBCDIC_RT_NL 0xf15 + +/* Unicode code points */ +#define U_LF 0x0a +#define U_NL 0x85 + +static UBool +_EBCDICSwapLFNL(UConverterSharedData *sharedData, UErrorCode *pErrorCode) { + UConverterMBCSTable *mbcsTable; + + const uint16_t *table, *results; + const uint8_t *bytes; + + int32_t (*newStateTable)[256]; + uint16_t *newResults; + uint8_t *p; + char *name; + + uint32_t stage2Entry; + uint32_t size, sizeofFromUBytes; + + mbcsTable=&sharedData->mbcs; + + table=mbcsTable->fromUnicodeTable; + bytes=mbcsTable->fromUnicodeBytes; + results=(const uint16_t *)bytes; + + /* + * Check that this is an EBCDIC table with SBCS portion - + * SBCS or EBCDIC_STATEFUL with standard EBCDIC LF and NL mappings. + * + * If not, ignore the option. Options are always ignored if they do not apply. + */ + if(!( + (mbcsTable->outputType==MBCS_OUTPUT_1 || mbcsTable->outputType==MBCS_OUTPUT_2_SISO) && + mbcsTable->stateTable[0][EBCDIC_LF]==MBCS_ENTRY_FINAL(0, MBCS_STATE_VALID_DIRECT_16, U_LF) && + mbcsTable->stateTable[0][EBCDIC_NL]==MBCS_ENTRY_FINAL(0, MBCS_STATE_VALID_DIRECT_16, U_NL) + )) { + return FALSE; + } + + if(mbcsTable->outputType==MBCS_OUTPUT_1) { + if(!( + EBCDIC_RT_LF==MBCS_SINGLE_RESULT_FROM_U(table, results, U_LF) && + EBCDIC_RT_NL==MBCS_SINGLE_RESULT_FROM_U(table, results, U_NL) + )) { + return FALSE; + } + } else /* MBCS_OUTPUT_2_SISO */ { + stage2Entry=MBCS_STAGE_2_FROM_U(table, U_LF); + if(!( + MBCS_FROM_U_IS_ROUNDTRIP(stage2Entry, U_LF)!=0 && + EBCDIC_LF==MBCS_VALUE_2_FROM_STAGE_2(bytes, stage2Entry, U_LF) + )) { + return FALSE; + } + + stage2Entry=MBCS_STAGE_2_FROM_U(table, U_NL); + if(!( + MBCS_FROM_U_IS_ROUNDTRIP(stage2Entry, U_NL)!=0 && + EBCDIC_NL==MBCS_VALUE_2_FROM_STAGE_2(bytes, stage2Entry, U_NL) + )) { + return FALSE; + } + } + + if(mbcsTable->fromUBytesLength>0) { + /* + * We _know_ the number of bytes in the fromUnicodeBytes array + * starting with header.version 4.1. + */ + sizeofFromUBytes=mbcsTable->fromUBytesLength; + } else { + /* + * Otherwise: + * There used to be code to enumerate the fromUnicode + * trie and find the highest entry, but it was removed in ICU 3.2 + * because it was not tested and caused a low code coverage number. + * See Jitterbug 3674. + * This affects only some .cnv file formats with a header.version + * below 4.1, and only when swaplfnl is requested. + * + * ucnvmbcs.c revision 1.99 is the last one with the + * ucnv_MBCSSizeofFromUBytes() function. + */ + *pErrorCode=U_INVALID_FORMAT_ERROR; + return FALSE; + } + + /* + * The table has an appropriate format. + * Allocate and build + * - a modified to-Unicode state table + * - a modified from-Unicode output array + * - a converter name string with the swap option appended + */ + size= + mbcsTable->countStates*1024+ + sizeofFromUBytes+ + UCNV_MAX_CONVERTER_NAME_LENGTH+20; + p=(uint8_t *)uprv_malloc(size); + if(p==NULL) { + *pErrorCode=U_MEMORY_ALLOCATION_ERROR; + return FALSE; + } + + /* copy and modify the to-Unicode state table */ + newStateTable=(int32_t (*)[256])p; + uprv_memcpy(newStateTable, mbcsTable->stateTable, mbcsTable->countStates*1024); + + newStateTable[0][EBCDIC_LF]=MBCS_ENTRY_FINAL(0, MBCS_STATE_VALID_DIRECT_16, U_NL); + newStateTable[0][EBCDIC_NL]=MBCS_ENTRY_FINAL(0, MBCS_STATE_VALID_DIRECT_16, U_LF); + + /* copy and modify the from-Unicode result table */ + newResults=(uint16_t *)newStateTable[mbcsTable->countStates]; + uprv_memcpy(newResults, bytes, sizeofFromUBytes); + + /* conveniently, the table access macros work on the left side of expressions */ + if(mbcsTable->outputType==MBCS_OUTPUT_1) { + MBCS_SINGLE_RESULT_FROM_U(table, newResults, U_LF)=EBCDIC_RT_NL; + MBCS_SINGLE_RESULT_FROM_U(table, newResults, U_NL)=EBCDIC_RT_LF; + } else /* MBCS_OUTPUT_2_SISO */ { + stage2Entry=MBCS_STAGE_2_FROM_U(table, U_LF); + MBCS_VALUE_2_FROM_STAGE_2(newResults, stage2Entry, U_LF)=EBCDIC_NL; + + stage2Entry=MBCS_STAGE_2_FROM_U(table, U_NL); + MBCS_VALUE_2_FROM_STAGE_2(newResults, stage2Entry, U_NL)=EBCDIC_LF; + } + + /* set the canonical converter name */ + name=(char *)newResults+sizeofFromUBytes; + uprv_strcpy(name, sharedData->staticData->name); + uprv_strcat(name, UCNV_SWAP_LFNL_OPTION_STRING); + + /* set the pointers */ + umtx_lock(NULL); + if(mbcsTable->swapLFNLStateTable==NULL) { + mbcsTable->swapLFNLStateTable=newStateTable; + mbcsTable->swapLFNLFromUnicodeBytes=(uint8_t *)newResults; + mbcsTable->swapLFNLName=name; + + newStateTable=NULL; + } + umtx_unlock(NULL); + + /* release the allocated memory if another thread beat us to it */ + if(newStateTable!=NULL) { + uprv_free(newStateTable); + } + return TRUE; +} + +/* reconstitute omitted fromUnicode data ------------------------------------ */ + +/* for details, compare with genmbcs.c MBCSAddFromUnicode() and transformEUC() */ +static UBool U_CALLCONV +writeStage3Roundtrip(const void *context, uint32_t value, UChar32 codePoints[32]) { + UConverterMBCSTable *mbcsTable=(UConverterMBCSTable *)context; + const uint16_t *table; + uint32_t *stage2; + uint8_t *bytes, *p; + UChar32 c; + int32_t i, st3; + + table=mbcsTable->fromUnicodeTable; + bytes=(uint8_t *)mbcsTable->fromUnicodeBytes; + + /* for EUC outputTypes, modify the value like genmbcs.c's transformEUC() */ + switch(mbcsTable->outputType) { + case MBCS_OUTPUT_3_EUC: + if(value<=0xffff) { + /* short sequences are stored directly */ + /* code set 0 or 1 */ + } else if(value<=0x8effff) { + /* code set 2 */ + value&=0x7fff; + } else /* first byte is 0x8f */ { + /* code set 3 */ + value&=0xff7f; + } + break; + case MBCS_OUTPUT_4_EUC: + if(value<=0xffffff) { + /* short sequences are stored directly */ + /* code set 0 or 1 */ + } else if(value<=0x8effffff) { + /* code set 2 */ + value&=0x7fffff; + } else /* first byte is 0x8f */ { + /* code set 3 */ + value&=0xff7fff; + } + break; + default: + break; + } + + for(i=0; i<=0x1f; ++value, ++i) { + c=codePoints[i]; + if(c<0) { + continue; + } + + /* locate the stage 2 & 3 data */ + stage2=((uint32_t *)table)+table[c>>10]+((c>>4)&0x3f); + p=bytes; + st3=(int32_t)(uint16_t)*stage2*16+(c&0xf); + + /* write the codepage bytes into stage 3 */ + switch(mbcsTable->outputType) { + case MBCS_OUTPUT_3: + case MBCS_OUTPUT_4_EUC: + p+=st3*3; + p[0]=(uint8_t)(value>>16); + p[1]=(uint8_t)(value>>8); + p[2]=(uint8_t)value; + break; + case MBCS_OUTPUT_4: + ((uint32_t *)p)[st3]=value; + break; + default: + /* 2 bytes per character */ + ((uint16_t *)p)[st3]=(uint16_t)value; + break; + } + + /* set the roundtrip flag */ + *stage2|=(1UL<<(16+(c&0xf))); + } + return TRUE; + } + +static void +reconstituteData(UConverterMBCSTable *mbcsTable, + uint32_t stage1Length, uint32_t stage2Length, + uint32_t fullStage2Length, /* lengths are numbers of units, not bytes */ + UErrorCode *pErrorCode) { + uint16_t *stage1; + uint32_t *stage2; + uint32_t dataLength=stage1Length*2+fullStage2Length*4+mbcsTable->fromUBytesLength; + mbcsTable->reconstitutedData=(uint8_t *)uprv_malloc(dataLength); + if(mbcsTable->reconstitutedData==NULL) { + *pErrorCode=U_MEMORY_ALLOCATION_ERROR; + return; + } + uprv_memset(mbcsTable->reconstitutedData, 0, dataLength); + + /* copy existing data and reroute the pointers */ + stage1=(uint16_t *)mbcsTable->reconstitutedData; + uprv_memcpy(stage1, mbcsTable->fromUnicodeTable, stage1Length*2); + + stage2=(uint32_t *)(stage1+stage1Length); + uprv_memcpy(stage2+(fullStage2Length-stage2Length), + mbcsTable->fromUnicodeTable+stage1Length, + stage2Length*4); + + mbcsTable->fromUnicodeTable=stage1; + mbcsTable->fromUnicodeBytes=(uint8_t *)(stage2+fullStage2Length); + + /* indexes into stage 2 count from the bottom of the fromUnicodeTable */ + stage2=(uint32_t *)stage1; + + /* reconstitute the initial part of stage 2 from the mbcsIndex */ + { + int32_t stageUTF8Length=((int32_t)mbcsTable->maxFastUChar+1)>>6; + int32_t stageUTF8Index=0; + int32_t st1, st2, st3, i; + + for(st1=0; stageUTF8Index<stageUTF8Length; ++st1) { + st2=stage1[st1]; + if(st2!=(int32_t)stage1Length/2) { + /* each stage 2 block has 64 entries corresponding to 16 entries in the mbcsIndex */ + for(i=0; i<16; ++i) { + st3=mbcsTable->mbcsIndex[stageUTF8Index++]; + if(st3!=0) { + /* an stage 2 entry's index is per stage 3 16-block, not per stage 3 entry */ + st3>>=4; + /* + * 4 stage 2 entries point to 4 consecutive stage 3 16-blocks which are + * allocated together as a single 64-block for access from the mbcsIndex + */ + stage2[st2++]=st3++; + stage2[st2++]=st3++; + stage2[st2++]=st3++; + stage2[st2++]=st3; + } else { + /* no stage 3 block, skip */ + st2+=4; + } + } + } else { + /* no stage 2 block, skip */ + stageUTF8Index+=16; + } + } + } + + /* reconstitute fromUnicodeBytes with roundtrips from toUnicode data */ + ucnv_MBCSEnumToUnicode(mbcsTable, writeStage3Roundtrip, mbcsTable, pErrorCode); +} + +/* MBCS setup functions ----------------------------------------------------- */ + +static void +ucnv_MBCSLoad(UConverterSharedData *sharedData, + UConverterLoadArgs *pArgs, + const uint8_t *raw, + UErrorCode *pErrorCode) { + UDataInfo info; + UConverterMBCSTable *mbcsTable=&sharedData->mbcs; + _MBCSHeader *header=(_MBCSHeader *)raw; + uint32_t offset; + uint32_t headerLength; + UBool noFromU=FALSE; + + if(header->version[0]==4) { + headerLength=MBCS_HEADER_V4_LENGTH; + } else if(header->version[0]==5 && header->version[1]>=3 && + (header->options&MBCS_OPT_UNKNOWN_INCOMPATIBLE_MASK)==0) { + headerLength=header->options&MBCS_OPT_LENGTH_MASK; + noFromU=(UBool)((header->options&MBCS_OPT_NO_FROM_U)!=0); + } else { + *pErrorCode=U_INVALID_TABLE_FORMAT; + return; + } + + mbcsTable->outputType=(uint8_t)header->flags; + if(noFromU && mbcsTable->outputType==MBCS_OUTPUT_1) { + *pErrorCode=U_INVALID_TABLE_FORMAT; + return; + } + + /* extension data, header version 4.2 and higher */ + offset=header->flags>>8; + if(offset!=0) { + mbcsTable->extIndexes=(const int32_t *)(raw+offset); + } + + if(mbcsTable->outputType==MBCS_OUTPUT_EXT_ONLY) { + UConverterLoadArgs args=UCNV_LOAD_ARGS_INITIALIZER; + UConverterSharedData *baseSharedData; + const int32_t *extIndexes; + const char *baseName; + + /* extension-only file, load the base table and set values appropriately */ + if((extIndexes=mbcsTable->extIndexes)==NULL) { + /* extension-only file without extension */ + *pErrorCode=U_INVALID_TABLE_FORMAT; + return; + } + + if(pArgs->nestedLoads!=1) { + /* an extension table must not be loaded as a base table */ + *pErrorCode=U_INVALID_TABLE_FILE; + return; + } + + /* load the base table */ + baseName=(const char *)header+headerLength*4; + if(0==uprv_strcmp(baseName, sharedData->staticData->name)) { + /* forbid loading this same extension-only file */ + *pErrorCode=U_INVALID_TABLE_FORMAT; + return; + } + + /* TODO parse package name out of the prefix of the base name in the extension .cnv file? */ + args.size=sizeof(UConverterLoadArgs); + args.nestedLoads=2; + args.onlyTestIsLoadable=pArgs->onlyTestIsLoadable; + args.reserved=pArgs->reserved; + args.options=pArgs->options; + args.pkg=pArgs->pkg; + args.name=baseName; + baseSharedData=ucnv_load(&args, pErrorCode); + if(U_FAILURE(*pErrorCode)) { + return; + } + if( baseSharedData->staticData->conversionType!=UCNV_MBCS || + baseSharedData->mbcs.baseSharedData!=NULL + ) { + ucnv_unload(baseSharedData); + *pErrorCode=U_INVALID_TABLE_FORMAT; + return; + } + if(pArgs->onlyTestIsLoadable) { + /* + * Exit as soon as we know that we can load the converter + * and the format is valid and supported. + * The worst that can happen in the following code is a memory + * allocation error. + */ + ucnv_unload(baseSharedData); + return; + } + + /* copy the base table data */ + uprv_memcpy(mbcsTable, &baseSharedData->mbcs, sizeof(UConverterMBCSTable)); + + /* overwrite values with relevant ones for the extension converter */ + mbcsTable->baseSharedData=baseSharedData; + mbcsTable->extIndexes=extIndexes; + + /* + * It would be possible to share the swapLFNL data with a base converter, + * but the generated name would have to be different, and the memory + * would have to be free'd only once. + * It is easier to just create the data for the extension converter + * separately when it is requested. + */ + mbcsTable->swapLFNLStateTable=NULL; + mbcsTable->swapLFNLFromUnicodeBytes=NULL; + mbcsTable->swapLFNLName=NULL; + + /* + * The reconstitutedData must be deleted only when the base converter + * is unloaded. + */ + mbcsTable->reconstitutedData=NULL; + + /* + * Set a special, runtime-only outputType if the extension converter + * is a DBCS version of a base converter that also maps single bytes. + */ + if( sharedData->staticData->conversionType==UCNV_DBCS || + (sharedData->staticData->conversionType==UCNV_MBCS && + sharedData->staticData->minBytesPerChar>=2) + ) { + if(baseSharedData->mbcs.outputType==MBCS_OUTPUT_2_SISO) { + /* the base converter is SI/SO-stateful */ + int32_t entry; + + /* get the dbcs state from the state table entry for SO=0x0e */ + entry=mbcsTable->stateTable[0][0xe]; + if( MBCS_ENTRY_IS_FINAL(entry) && + MBCS_ENTRY_FINAL_ACTION(entry)==MBCS_STATE_CHANGE_ONLY && + MBCS_ENTRY_FINAL_STATE(entry)!=0 + ) { + mbcsTable->dbcsOnlyState=(uint8_t)MBCS_ENTRY_FINAL_STATE(entry); + + mbcsTable->outputType=MBCS_OUTPUT_DBCS_ONLY; + } + } else if( + baseSharedData->staticData->conversionType==UCNV_MBCS && + baseSharedData->staticData->minBytesPerChar==1 && + baseSharedData->staticData->maxBytesPerChar==2 && + mbcsTable->countStates<=127 + ) { + /* non-stateful base converter, need to modify the state table */ + int32_t (*newStateTable)[256]; + int32_t *state; + int32_t i, count; + + /* allocate a new state table and copy the base state table contents */ + count=mbcsTable->countStates; + newStateTable=(int32_t (*)[256])uprv_malloc((count+1)*1024); + if(newStateTable==NULL) { + ucnv_unload(baseSharedData); + *pErrorCode=U_MEMORY_ALLOCATION_ERROR; + return; + } + + uprv_memcpy(newStateTable, mbcsTable->stateTable, count*1024); + + /* change all final single-byte entries to go to a new all-illegal state */ + state=newStateTable[0]; + for(i=0; i<256; ++i) { + if(MBCS_ENTRY_IS_FINAL(state[i])) { + state[i]=MBCS_ENTRY_TRANSITION(count, 0); + } + } + + /* build the new all-illegal state */ + state=newStateTable[count]; + for(i=0; i<256; ++i) { + state[i]=MBCS_ENTRY_FINAL(0, MBCS_STATE_ILLEGAL, 0); + } + mbcsTable->stateTable=(const int32_t (*)[256])newStateTable; + mbcsTable->countStates=(uint8_t)(count+1); + mbcsTable->stateTableOwned=TRUE; + + mbcsTable->outputType=MBCS_OUTPUT_DBCS_ONLY; + } + } + + /* + * unlike below for files with base tables, do not get the unicodeMask + * from the sharedData; instead, use the base table's unicodeMask, + * which we copied in the memcpy above; + * this is necessary because the static data unicodeMask, especially + * the UCNV_HAS_SUPPLEMENTARY flag, is part of the base table data + */ + } else { + /* conversion file with a base table; an additional extension table is optional */ + /* make sure that the output type is known */ + switch(mbcsTable->outputType) { + case MBCS_OUTPUT_1: + case MBCS_OUTPUT_2: + case MBCS_OUTPUT_3: + case MBCS_OUTPUT_4: + case MBCS_OUTPUT_3_EUC: + case MBCS_OUTPUT_4_EUC: + case MBCS_OUTPUT_2_SISO: + /* OK */ + break; + default: + *pErrorCode=U_INVALID_TABLE_FORMAT; + return; + } + if(pArgs->onlyTestIsLoadable) { + /* + * Exit as soon as we know that we can load the converter + * and the format is valid and supported. + * The worst that can happen in the following code is a memory + * allocation error. + */ + return; + } + + mbcsTable->countStates=(uint8_t)header->countStates; + mbcsTable->countToUFallbacks=header->countToUFallbacks; + mbcsTable->stateTable=(const int32_t (*)[256])(raw+headerLength*4); + mbcsTable->toUFallbacks=(const _MBCSToUFallback *)(mbcsTable->stateTable+header->countStates); + mbcsTable->unicodeCodeUnits=(const uint16_t *)(raw+header->offsetToUCodeUnits); + + mbcsTable->fromUnicodeTable=(const uint16_t *)(raw+header->offsetFromUTable); + mbcsTable->fromUnicodeBytes=(const uint8_t *)(raw+header->offsetFromUBytes); + mbcsTable->fromUBytesLength=header->fromUBytesLength; + + /* + * converter versions 6.1 and up contain a unicodeMask that is + * used here to select the most efficient function implementations + */ + info.size=sizeof(UDataInfo); + udata_getInfo((UDataMemory *)sharedData->dataMemory, &info); + if(info.formatVersion[0]>6 || (info.formatVersion[0]==6 && info.formatVersion[1]>=1)) { + /* mask off possible future extensions to be safe */ + mbcsTable->unicodeMask=(uint8_t)(sharedData->staticData->unicodeMask&3); + } else { + /* for older versions, assume worst case: contains anything possible (prevent over-optimizations) */ + mbcsTable->unicodeMask=UCNV_HAS_SUPPLEMENTARY|UCNV_HAS_SURROGATES; + } + + /* + * _MBCSHeader.version 4.3 adds utf8Friendly data structures. + * Check for the header version, SBCS vs. MBCS, and for whether the + * data structures are optimized for code points as high as what the + * runtime code is designed for. + * The implementation does not handle mapping tables with entries for + * unpaired surrogates. + */ + if( header->version[1]>=3 && + (mbcsTable->unicodeMask&UCNV_HAS_SURROGATES)==0 && + (mbcsTable->countStates==1 ? + (header->version[2]>=(SBCS_FAST_MAX>>8)) : + (header->version[2]>=(MBCS_FAST_MAX>>8)) + ) + ) { + mbcsTable->utf8Friendly=TRUE; + + if(mbcsTable->countStates==1) { + /* + * SBCS: Stage 3 is allocated in 64-entry blocks for U+0000..SBCS_FAST_MAX or higher. + * Build a table with indexes to each block, to be used instead of + * the regular stage 1/2 table. + */ + int32_t i; + for(i=0; i<(SBCS_FAST_LIMIT>>6); ++i) { + mbcsTable->sbcsIndex[i]=mbcsTable->fromUnicodeTable[mbcsTable->fromUnicodeTable[i>>4]+((i<<2)&0x3c)]; + } + /* set SBCS_FAST_MAX to reflect the reach of sbcsIndex[] even if header->version[2]>(SBCS_FAST_MAX>>8) */ + mbcsTable->maxFastUChar=SBCS_FAST_MAX; + } else { + /* + * MBCS: Stage 3 is allocated in 64-entry blocks for U+0000..MBCS_FAST_MAX or higher. + * The .cnv file is prebuilt with an additional stage table with indexes + * to each block. + */ + mbcsTable->mbcsIndex=(const uint16_t *) + (mbcsTable->fromUnicodeBytes+ + (noFromU ? 0 : mbcsTable->fromUBytesLength)); + mbcsTable->maxFastUChar=(((UChar)header->version[2])<<8)|0xff; + } + } + + /* calculate a bit set of 4 ASCII characters per bit that round-trip to ASCII bytes */ + { + uint32_t asciiRoundtrips=0xffffffff; + int32_t i; + + for(i=0; i<0x80; ++i) { + if(mbcsTable->stateTable[0][i]!=MBCS_ENTRY_FINAL(0, MBCS_STATE_VALID_DIRECT_16, i)) { + asciiRoundtrips&=~((uint32_t)1<<(i>>2)); + } + } + mbcsTable->asciiRoundtrips=asciiRoundtrips; + } + + if(noFromU) { + uint32_t stage1Length= + mbcsTable->unicodeMask&UCNV_HAS_SUPPLEMENTARY ? + 0x440 : 0x40; + uint32_t stage2Length= + (header->offsetFromUBytes-header->offsetFromUTable)/4- + stage1Length/2; + reconstituteData(mbcsTable, stage1Length, stage2Length, header->fullStage2Length, pErrorCode); + } + } + + /* Set the impl pointer here so that it is set for both extension-only and base tables. */ + if(mbcsTable->utf8Friendly) { + if(mbcsTable->countStates==1) { + sharedData->impl=&_SBCSUTF8Impl; + } else { + if(mbcsTable->outputType==MBCS_OUTPUT_2) { + sharedData->impl=&_DBCSUTF8Impl; + } + } + } + + if(mbcsTable->outputType==MBCS_OUTPUT_DBCS_ONLY || mbcsTable->outputType==MBCS_OUTPUT_2_SISO) { + /* + * MBCS_OUTPUT_DBCS_ONLY: No SBCS mappings, therefore ASCII does not roundtrip. + * MBCS_OUTPUT_2_SISO: Bypass the ASCII fastpath to handle prevLength correctly. + */ + mbcsTable->asciiRoundtrips=0; + } +} + +static void +ucnv_MBCSUnload(UConverterSharedData *sharedData) { + UConverterMBCSTable *mbcsTable=&sharedData->mbcs; + + if(mbcsTable->swapLFNLStateTable!=NULL) { + uprv_free(mbcsTable->swapLFNLStateTable); + } + if(mbcsTable->stateTableOwned) { + uprv_free((void *)mbcsTable->stateTable); + } + if(mbcsTable->baseSharedData!=NULL) { + ucnv_unload(mbcsTable->baseSharedData); + } + if(mbcsTable->reconstitutedData!=NULL) { + uprv_free(mbcsTable->reconstitutedData); + } +} + +static void +ucnv_MBCSOpen(UConverter *cnv, + UConverterLoadArgs *pArgs, + UErrorCode *pErrorCode) { + UConverterMBCSTable *mbcsTable; + const int32_t *extIndexes; + uint8_t outputType; + int8_t maxBytesPerUChar; + + if(pArgs->onlyTestIsLoadable) { + return; + } + + mbcsTable=&cnv->sharedData->mbcs; + outputType=mbcsTable->outputType; + + if(outputType==MBCS_OUTPUT_DBCS_ONLY) { + /* the swaplfnl option does not apply, remove it */ + cnv->options=pArgs->options&=~UCNV_OPTION_SWAP_LFNL; + } + + if((pArgs->options&UCNV_OPTION_SWAP_LFNL)!=0) { + /* do this because double-checked locking is broken */ + UBool isCached; + + umtx_lock(NULL); + isCached=mbcsTable->swapLFNLStateTable!=NULL; + umtx_unlock(NULL); + + if(!isCached) { + if(!_EBCDICSwapLFNL(cnv->sharedData, pErrorCode)) { + if(U_FAILURE(*pErrorCode)) { + return; /* something went wrong */ + } + + /* the option does not apply, remove it */ + cnv->options=pArgs->options&=~UCNV_OPTION_SWAP_LFNL; + } + } + } + + if(uprv_strstr(pArgs->name, "18030")!=NULL) { + if(uprv_strstr(pArgs->name, "gb18030")!=NULL || uprv_strstr(pArgs->name, "GB18030")!=NULL) { + /* set a flag for GB 18030 mode, which changes the callback behavior */ + cnv->options|=_MBCS_OPTION_GB18030; + } + } else if((uprv_strstr(pArgs->name, "KEIS")!=NULL) || (uprv_strstr(pArgs->name, "keis")!=NULL)) { + /* set a flag for KEIS converter, which changes the SI/SO character sequence */ + cnv->options|=_MBCS_OPTION_KEIS; + } else if((uprv_strstr(pArgs->name, "JEF")!=NULL) || (uprv_strstr(pArgs->name, "jef")!=NULL)) { + /* set a flag for JEF converter, which changes the SI/SO character sequence */ + cnv->options|=_MBCS_OPTION_JEF; + } else if((uprv_strstr(pArgs->name, "JIPS")!=NULL) || (uprv_strstr(pArgs->name, "jips")!=NULL)) { + /* set a flag for JIPS converter, which changes the SI/SO character sequence */ + cnv->options|=_MBCS_OPTION_JIPS; + } + + /* fix maxBytesPerUChar depending on outputType and options etc. */ + if(outputType==MBCS_OUTPUT_2_SISO) { + cnv->maxBytesPerUChar=3; /* SO+DBCS */ + } + + extIndexes=mbcsTable->extIndexes; + if(extIndexes!=NULL) { + maxBytesPerUChar=(int8_t)UCNV_GET_MAX_BYTES_PER_UCHAR(extIndexes); + if(outputType==MBCS_OUTPUT_2_SISO) { + ++maxBytesPerUChar; /* SO + multiple DBCS */ + } + + if(maxBytesPerUChar>cnv->maxBytesPerUChar) { + cnv->maxBytesPerUChar=maxBytesPerUChar; + } + } + +#if 0 + /* + * documentation of UConverter fields used for status + * all of these fields are (re)set to 0 by ucnv_bld.c and ucnv_reset() + */ + + /* toUnicode */ + cnv->toUnicodeStatus=0; /* offset */ + cnv->mode=0; /* state */ + cnv->toULength=0; /* byteIndex */ + + /* fromUnicode */ + cnv->fromUChar32=0; + cnv->fromUnicodeStatus=1; /* prevLength */ +#endif +} + +static const char * +ucnv_MBCSGetName(const UConverter *cnv) { + if((cnv->options&UCNV_OPTION_SWAP_LFNL)!=0 && cnv->sharedData->mbcs.swapLFNLName!=NULL) { + return cnv->sharedData->mbcs.swapLFNLName; + } else { + return cnv->sharedData->staticData->name; + } +} + +/* MBCS-to-Unicode conversion functions ------------------------------------- */ + +static UChar32 +ucnv_MBCSGetFallback(UConverterMBCSTable *mbcsTable, uint32_t offset) { + const _MBCSToUFallback *toUFallbacks; + uint32_t i, start, limit; + + limit=mbcsTable->countToUFallbacks; + if(limit>0) { + /* do a binary search for the fallback mapping */ + toUFallbacks=mbcsTable->toUFallbacks; + start=0; + while(start<limit-1) { + i=(start+limit)/2; + if(offset<toUFallbacks[i].offset) { + limit=i; + } else { + start=i; + } + } + + /* did we really find it? */ + if(offset==toUFallbacks[start].offset) { + return toUFallbacks[start].codePoint; + } + } + + return 0xfffe; +} + +/* This version of ucnv_MBCSToUnicodeWithOffsets() is optimized for single-byte, single-state codepages. */ +static void +ucnv_MBCSSingleToUnicodeWithOffsets(UConverterToUnicodeArgs *pArgs, + UErrorCode *pErrorCode) { + UConverter *cnv; + const uint8_t *source, *sourceLimit; + UChar *target; + const UChar *targetLimit; + int32_t *offsets; + + const int32_t (*stateTable)[256]; + + int32_t sourceIndex; + + int32_t entry; + UChar c; + uint8_t action; + + /* set up the local pointers */ + cnv=pArgs->converter; + source=(const uint8_t *)pArgs->source; + sourceLimit=(const uint8_t *)pArgs->sourceLimit; + target=pArgs->target; + targetLimit=pArgs->targetLimit; + offsets=pArgs->offsets; + + if((cnv->options&UCNV_OPTION_SWAP_LFNL)!=0) { + stateTable=(const int32_t (*)[256])cnv->sharedData->mbcs.swapLFNLStateTable; + } else { + stateTable=cnv->sharedData->mbcs.stateTable; + } + + /* sourceIndex=-1 if the current character began in the previous buffer */ + sourceIndex=0; + + /* conversion loop */ + while(source<sourceLimit) { + /* + * This following test is to see if available input would overflow the output. + * It does not catch output of more than one code unit that + * overflows as a result of a surrogate pair or callback output + * from the last source byte. + * Therefore, those situations also test for overflows and will + * then break the loop, too. + */ + if(target>=targetLimit) { + /* target is full */ + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + break; + } + + entry=stateTable[0][*source++]; + /* MBCS_ENTRY_IS_FINAL(entry) */ + + /* test the most common case first */ + if(MBCS_ENTRY_FINAL_IS_VALID_DIRECT_16(entry)) { + /* output BMP code point */ + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + + /* normal end of action codes: prepare for a new character */ + ++sourceIndex; + continue; + } + + /* + * An if-else-if chain provides more reliable performance for + * the most common cases compared to a switch. + */ + action=(uint8_t)(MBCS_ENTRY_FINAL_ACTION(entry)); + if(action==MBCS_STATE_VALID_DIRECT_20 || + (action==MBCS_STATE_FALLBACK_DIRECT_20 && UCNV_TO_U_USE_FALLBACK(cnv)) + ) { + entry=MBCS_ENTRY_FINAL_VALUE(entry); + /* output surrogate pair */ + *target++=(UChar)(0xd800|(UChar)(entry>>10)); + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + c=(UChar)(0xdc00|(UChar)(entry&0x3ff)); + if(target<targetLimit) { + *target++=c; + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + } else { + /* target overflow */ + cnv->UCharErrorBuffer[0]=c; + cnv->UCharErrorBufferLength=1; + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + break; + } + + ++sourceIndex; + continue; + } else if(action==MBCS_STATE_FALLBACK_DIRECT_16) { + if(UCNV_TO_U_USE_FALLBACK(cnv)) { + /* output BMP code point */ + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + + ++sourceIndex; + continue; + } + } else if(action==MBCS_STATE_UNASSIGNED) { + /* just fall through */ + } else if(action==MBCS_STATE_ILLEGAL) { + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + } else { + /* reserved, must never occur */ + ++sourceIndex; + continue; + } + + if(U_FAILURE(*pErrorCode)) { + /* callback(illegal) */ + break; + } else /* unassigned sequences indicated with byteIndex>0 */ { + /* try an extension mapping */ + pArgs->source=(const char *)source; + cnv->toUBytes[0]=*(source-1); + cnv->toULength=_extToU(cnv, cnv->sharedData, + 1, &source, sourceLimit, + &target, targetLimit, + &offsets, sourceIndex, + pArgs->flush, + pErrorCode); + sourceIndex+=1+(int32_t)(source-(const uint8_t *)pArgs->source); + + if(U_FAILURE(*pErrorCode)) { + /* not mappable or buffer overflow */ + break; + } + } + } + + /* write back the updated pointers */ + pArgs->source=(const char *)source; + pArgs->target=target; + pArgs->offsets=offsets; +} + +/* + * This version of ucnv_MBCSSingleToUnicodeWithOffsets() is optimized for single-byte, single-state codepages + * that only map to and from the BMP. + * In addition to single-byte optimizations, the offset calculations + * become much easier. + */ +static void +ucnv_MBCSSingleToBMPWithOffsets(UConverterToUnicodeArgs *pArgs, + UErrorCode *pErrorCode) { + UConverter *cnv; + const uint8_t *source, *sourceLimit, *lastSource; + UChar *target; + int32_t targetCapacity, length; + int32_t *offsets; + + const int32_t (*stateTable)[256]; + + int32_t sourceIndex; + + int32_t entry; + uint8_t action; + + /* set up the local pointers */ + cnv=pArgs->converter; + source=(const uint8_t *)pArgs->source; + sourceLimit=(const uint8_t *)pArgs->sourceLimit; + target=pArgs->target; + targetCapacity=(int32_t)(pArgs->targetLimit-pArgs->target); + offsets=pArgs->offsets; + + if((cnv->options&UCNV_OPTION_SWAP_LFNL)!=0) { + stateTable=(const int32_t (*)[256])cnv->sharedData->mbcs.swapLFNLStateTable; + } else { + stateTable=cnv->sharedData->mbcs.stateTable; + } + + /* sourceIndex=-1 if the current character began in the previous buffer */ + sourceIndex=0; + lastSource=source; + + /* + * since the conversion here is 1:1 UChar:uint8_t, we need only one counter + * for the minimum of the sourceLength and targetCapacity + */ + length=(int32_t)(sourceLimit-source); + if(length<targetCapacity) { + targetCapacity=length; + } + +#if MBCS_UNROLL_SINGLE_TO_BMP + /* unrolling makes it faster on Pentium III/Windows 2000 */ + /* unroll the loop with the most common case */ +unrolled: + if(targetCapacity>=16) { + int32_t count, loops, oredEntries; + + loops=count=targetCapacity>>4; + do { + oredEntries=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + oredEntries|=entry=stateTable[0][*source++]; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + + /* were all 16 entries really valid? */ + if(!MBCS_ENTRY_FINAL_IS_VALID_DIRECT_16(oredEntries)) { + /* no, return to the first of these 16 */ + source-=16; + target-=16; + break; + } + } while(--count>0); + count=loops-count; + targetCapacity-=16*count; + + if(offsets!=NULL) { + lastSource+=16*count; + while(count>0) { + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + --count; + } + } + } +#endif + + /* conversion loop */ + while(targetCapacity > 0 && source < sourceLimit) { + entry=stateTable[0][*source++]; + /* MBCS_ENTRY_IS_FINAL(entry) */ + + /* test the most common case first */ + if(MBCS_ENTRY_FINAL_IS_VALID_DIRECT_16(entry)) { + /* output BMP code point */ + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + --targetCapacity; + continue; + } + + /* + * An if-else-if chain provides more reliable performance for + * the most common cases compared to a switch. + */ + action=(uint8_t)(MBCS_ENTRY_FINAL_ACTION(entry)); + if(action==MBCS_STATE_FALLBACK_DIRECT_16) { + if(UCNV_TO_U_USE_FALLBACK(cnv)) { + /* output BMP code point */ + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + --targetCapacity; + continue; + } + } else if(action==MBCS_STATE_UNASSIGNED) { + /* just fall through */ + } else if(action==MBCS_STATE_ILLEGAL) { + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + } else { + /* reserved, must never occur */ + continue; + } + + /* set offsets since the start or the last extension */ + if(offsets!=NULL) { + int32_t count=(int32_t)(source-lastSource); + + /* predecrement: do not set the offset for the callback-causing character */ + while(--count>0) { + *offsets++=sourceIndex++; + } + /* offset and sourceIndex are now set for the current character */ + } + + if(U_FAILURE(*pErrorCode)) { + /* callback(illegal) */ + break; + } else /* unassigned sequences indicated with byteIndex>0 */ { + /* try an extension mapping */ + lastSource=source; + cnv->toUBytes[0]=*(source-1); + cnv->toULength=_extToU(cnv, cnv->sharedData, + 1, &source, sourceLimit, + &target, pArgs->targetLimit, + &offsets, sourceIndex, + pArgs->flush, + pErrorCode); + sourceIndex+=1+(int32_t)(source-lastSource); + + if(U_FAILURE(*pErrorCode)) { + /* not mappable or buffer overflow */ + break; + } + + /* recalculate the targetCapacity after an extension mapping */ + targetCapacity=(int32_t)(pArgs->targetLimit-target); + length=(int32_t)(sourceLimit-source); + if(length<targetCapacity) { + targetCapacity=length; + } + } + +#if MBCS_UNROLL_SINGLE_TO_BMP + /* unrolling makes it faster on Pentium III/Windows 2000 */ + goto unrolled; +#endif + } + + if(U_SUCCESS(*pErrorCode) && source<sourceLimit && target>=pArgs->targetLimit) { + /* target is full */ + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + } + + /* set offsets since the start or the last callback */ + if(offsets!=NULL) { + size_t count=source-lastSource; + while(count>0) { + *offsets++=sourceIndex++; + --count; + } + } + + /* write back the updated pointers */ + pArgs->source=(const char *)source; + pArgs->target=target; + pArgs->offsets=offsets; +} + +static UBool +hasValidTrailBytes(const int32_t (*stateTable)[256], uint8_t state) { + const int32_t *row=stateTable[state]; + int32_t b, entry; + /* First test for final entries in this state for some commonly valid byte values. */ + entry=row[0xa1]; + if( !MBCS_ENTRY_IS_TRANSITION(entry) && + MBCS_ENTRY_FINAL_ACTION(entry)!=MBCS_STATE_ILLEGAL + ) { + return TRUE; + } + entry=row[0x41]; + if( !MBCS_ENTRY_IS_TRANSITION(entry) && + MBCS_ENTRY_FINAL_ACTION(entry)!=MBCS_STATE_ILLEGAL + ) { + return TRUE; + } + /* Then test for final entries in this state. */ + for(b=0; b<=0xff; ++b) { + entry=row[b]; + if( !MBCS_ENTRY_IS_TRANSITION(entry) && + MBCS_ENTRY_FINAL_ACTION(entry)!=MBCS_STATE_ILLEGAL + ) { + return TRUE; + } + } + /* Then recurse for transition entries. */ + for(b=0; b<=0xff; ++b) { + entry=row[b]; + if( MBCS_ENTRY_IS_TRANSITION(entry) && + hasValidTrailBytes(stateTable, (uint8_t)MBCS_ENTRY_TRANSITION_STATE(entry)) + ) { + return TRUE; + } + } + return FALSE; +} + +/* + * Is byte b a single/lead byte in this state? + * Recurse for transition states, because here we don't want to say that + * b is a lead byte if all byte sequences that start with b are illegal. + */ +static UBool +isSingleOrLead(const int32_t (*stateTable)[256], uint8_t state, UBool isDBCSOnly, uint8_t b) { + const int32_t *row=stateTable[state]; + int32_t entry=row[b]; + if(MBCS_ENTRY_IS_TRANSITION(entry)) { /* lead byte */ + return hasValidTrailBytes(stateTable, (uint8_t)MBCS_ENTRY_TRANSITION_STATE(entry)); + } else { + uint8_t action=(uint8_t)(MBCS_ENTRY_FINAL_ACTION(entry)); + if(action==MBCS_STATE_CHANGE_ONLY && isDBCSOnly) { + return FALSE; /* SI/SO are illegal for DBCS-only conversion */ + } else { + return action!=MBCS_STATE_ILLEGAL; + } + } +} + +U_CFUNC void +ucnv_MBCSToUnicodeWithOffsets(UConverterToUnicodeArgs *pArgs, + UErrorCode *pErrorCode) { + UConverter *cnv; + const uint8_t *source, *sourceLimit; + UChar *target; + const UChar *targetLimit; + int32_t *offsets; + + const int32_t (*stateTable)[256]; + const uint16_t *unicodeCodeUnits; + + uint32_t offset; + uint8_t state; + int8_t byteIndex; + uint8_t *bytes; + + int32_t sourceIndex, nextSourceIndex; + + int32_t entry; + UChar c; + uint8_t action; + + /* use optimized function if possible */ + cnv=pArgs->converter; + + if(cnv->preToULength>0) { + /* + * pass sourceIndex=-1 because we continue from an earlier buffer + * in the future, this may change with continuous offsets + */ + ucnv_extContinueMatchToU(cnv, pArgs, -1, pErrorCode); + + if(U_FAILURE(*pErrorCode) || cnv->preToULength<0) { + return; + } + } + + if(cnv->sharedData->mbcs.countStates==1) { + if(!(cnv->sharedData->mbcs.unicodeMask&UCNV_HAS_SUPPLEMENTARY)) { + ucnv_MBCSSingleToBMPWithOffsets(pArgs, pErrorCode); + } else { + ucnv_MBCSSingleToUnicodeWithOffsets(pArgs, pErrorCode); + } + return; + } + + /* set up the local pointers */ + source=(const uint8_t *)pArgs->source; + sourceLimit=(const uint8_t *)pArgs->sourceLimit; + target=pArgs->target; + targetLimit=pArgs->targetLimit; + offsets=pArgs->offsets; + + if((cnv->options&UCNV_OPTION_SWAP_LFNL)!=0) { + stateTable=(const int32_t (*)[256])cnv->sharedData->mbcs.swapLFNLStateTable; + } else { + stateTable=cnv->sharedData->mbcs.stateTable; + } + unicodeCodeUnits=cnv->sharedData->mbcs.unicodeCodeUnits; + + /* get the converter state from UConverter */ + offset=cnv->toUnicodeStatus; + byteIndex=cnv->toULength; + bytes=cnv->toUBytes; + + /* + * if we are in the SBCS state for a DBCS-only converter, + * then load the DBCS state from the MBCS data + * (dbcsOnlyState==0 if it is not a DBCS-only converter) + */ + if((state=(uint8_t)(cnv->mode))==0) { + state=cnv->sharedData->mbcs.dbcsOnlyState; + } + + /* sourceIndex=-1 if the current character began in the previous buffer */ + sourceIndex=byteIndex==0 ? 0 : -1; + nextSourceIndex=0; + + /* conversion loop */ + while(source<sourceLimit) { + /* + * This following test is to see if available input would overflow the output. + * It does not catch output of more than one code unit that + * overflows as a result of a surrogate pair or callback output + * from the last source byte. + * Therefore, those situations also test for overflows and will + * then break the loop, too. + */ + if(target>=targetLimit) { + /* target is full */ + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + break; + } + + if(byteIndex==0) { + /* optimized loop for 1/2-byte input and BMP output */ + if(offsets==NULL) { + do { + entry=stateTable[state][*source]; + if(MBCS_ENTRY_IS_TRANSITION(entry)) { + state=(uint8_t)MBCS_ENTRY_TRANSITION_STATE(entry); + offset=MBCS_ENTRY_TRANSITION_OFFSET(entry); + + ++source; + if( source<sourceLimit && + MBCS_ENTRY_IS_FINAL(entry=stateTable[state][*source]) && + MBCS_ENTRY_FINAL_ACTION(entry)==MBCS_STATE_VALID_16 && + (c=unicodeCodeUnits[offset+MBCS_ENTRY_FINAL_VALUE_16(entry)])<0xfffe + ) { + ++source; + *target++=c; + state=(uint8_t)MBCS_ENTRY_FINAL_STATE(entry); /* typically 0 */ + offset=0; + } else { + /* set the state and leave the optimized loop */ + bytes[0]=*(source-1); + byteIndex=1; + break; + } + } else { + if(MBCS_ENTRY_FINAL_IS_VALID_DIRECT_16(entry)) { + /* output BMP code point */ + ++source; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + state=(uint8_t)MBCS_ENTRY_FINAL_STATE(entry); /* typically 0 */ + } else { + /* leave the optimized loop */ + break; + } + } + } while(source<sourceLimit && target<targetLimit); + } else /* offsets!=NULL */ { + do { + entry=stateTable[state][*source]; + if(MBCS_ENTRY_IS_TRANSITION(entry)) { + state=(uint8_t)MBCS_ENTRY_TRANSITION_STATE(entry); + offset=MBCS_ENTRY_TRANSITION_OFFSET(entry); + + ++source; + if( source<sourceLimit && + MBCS_ENTRY_IS_FINAL(entry=stateTable[state][*source]) && + MBCS_ENTRY_FINAL_ACTION(entry)==MBCS_STATE_VALID_16 && + (c=unicodeCodeUnits[offset+MBCS_ENTRY_FINAL_VALUE_16(entry)])<0xfffe + ) { + ++source; + *target++=c; + if(offsets!=NULL) { + *offsets++=sourceIndex; + sourceIndex=(nextSourceIndex+=2); + } + state=(uint8_t)MBCS_ENTRY_FINAL_STATE(entry); /* typically 0 */ + offset=0; + } else { + /* set the state and leave the optimized loop */ + ++nextSourceIndex; + bytes[0]=*(source-1); + byteIndex=1; + break; + } + } else { + if(MBCS_ENTRY_FINAL_IS_VALID_DIRECT_16(entry)) { + /* output BMP code point */ + ++source; + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + if(offsets!=NULL) { + *offsets++=sourceIndex; + sourceIndex=++nextSourceIndex; + } + state=(uint8_t)MBCS_ENTRY_FINAL_STATE(entry); /* typically 0 */ + } else { + /* leave the optimized loop */ + break; + } + } + } while(source<sourceLimit && target<targetLimit); + } + + /* + * these tests and break statements could be put inside the loop + * if C had "break outerLoop" like Java + */ + if(source>=sourceLimit) { + break; + } + if(target>=targetLimit) { + /* target is full */ + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + break; + } + + ++nextSourceIndex; + bytes[byteIndex++]=*source++; + } else /* byteIndex>0 */ { + ++nextSourceIndex; + entry=stateTable[state][bytes[byteIndex++]=*source++]; + } + + if(MBCS_ENTRY_IS_TRANSITION(entry)) { + state=(uint8_t)MBCS_ENTRY_TRANSITION_STATE(entry); + offset+=MBCS_ENTRY_TRANSITION_OFFSET(entry); + continue; + } + + /* save the previous state for proper extension mapping with SI/SO-stateful converters */ + cnv->mode=state; + + /* set the next state early so that we can reuse the entry variable */ + state=(uint8_t)MBCS_ENTRY_FINAL_STATE(entry); /* typically 0 */ + + /* + * An if-else-if chain provides more reliable performance for + * the most common cases compared to a switch. + */ + action=(uint8_t)(MBCS_ENTRY_FINAL_ACTION(entry)); + if(action==MBCS_STATE_VALID_16) { + offset+=MBCS_ENTRY_FINAL_VALUE_16(entry); + c=unicodeCodeUnits[offset]; + if(c<0xfffe) { + /* output BMP code point */ + *target++=c; + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + byteIndex=0; + } else if(c==0xfffe) { + if(UCNV_TO_U_USE_FALLBACK(cnv) && (entry=(int32_t)ucnv_MBCSGetFallback(&cnv->sharedData->mbcs, offset))!=0xfffe) { + /* output fallback BMP code point */ + *target++=(UChar)entry; + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + byteIndex=0; + } + } else { + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + } + } else if(action==MBCS_STATE_VALID_DIRECT_16) { + /* output BMP code point */ + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + byteIndex=0; + } else if(action==MBCS_STATE_VALID_16_PAIR) { + offset+=MBCS_ENTRY_FINAL_VALUE_16(entry); + c=unicodeCodeUnits[offset++]; + if(c<0xd800) { + /* output BMP code point below 0xd800 */ + *target++=c; + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + byteIndex=0; + } else if(UCNV_TO_U_USE_FALLBACK(cnv) ? c<=0xdfff : c<=0xdbff) { + /* output roundtrip or fallback surrogate pair */ + *target++=(UChar)(c&0xdbff); + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + byteIndex=0; + if(target<targetLimit) { + *target++=unicodeCodeUnits[offset]; + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + } else { + /* target overflow */ + cnv->UCharErrorBuffer[0]=unicodeCodeUnits[offset]; + cnv->UCharErrorBufferLength=1; + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + + offset=0; + break; + } + } else if(UCNV_TO_U_USE_FALLBACK(cnv) ? (c&0xfffe)==0xe000 : c==0xe000) { + /* output roundtrip BMP code point above 0xd800 or fallback BMP code point */ + *target++=unicodeCodeUnits[offset]; + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + byteIndex=0; + } else if(c==0xffff) { + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + } + } else if(action==MBCS_STATE_VALID_DIRECT_20 || + (action==MBCS_STATE_FALLBACK_DIRECT_20 && UCNV_TO_U_USE_FALLBACK(cnv)) + ) { + entry=MBCS_ENTRY_FINAL_VALUE(entry); + /* output surrogate pair */ + *target++=(UChar)(0xd800|(UChar)(entry>>10)); + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + byteIndex=0; + c=(UChar)(0xdc00|(UChar)(entry&0x3ff)); + if(target<targetLimit) { + *target++=c; + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + } else { + /* target overflow */ + cnv->UCharErrorBuffer[0]=c; + cnv->UCharErrorBufferLength=1; + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + + offset=0; + break; + } + } else if(action==MBCS_STATE_CHANGE_ONLY) { + /* + * This serves as a state change without any output. + * It is useful for reading simple stateful encodings, + * for example using just Shift-In/Shift-Out codes. + * The 21 unused bits may later be used for more sophisticated + * state transitions. + */ + if(cnv->sharedData->mbcs.dbcsOnlyState==0) { + byteIndex=0; + } else { + /* SI/SO are illegal for DBCS-only conversion */ + state=(uint8_t)(cnv->mode); /* restore the previous state */ + + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + } + } else if(action==MBCS_STATE_FALLBACK_DIRECT_16) { + if(UCNV_TO_U_USE_FALLBACK(cnv)) { + /* output BMP code point */ + *target++=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + byteIndex=0; + } + } else if(action==MBCS_STATE_UNASSIGNED) { + /* just fall through */ + } else if(action==MBCS_STATE_ILLEGAL) { + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + } else { + /* reserved, must never occur */ + byteIndex=0; + } + + /* end of action codes: prepare for a new character */ + offset=0; + + if(byteIndex==0) { + sourceIndex=nextSourceIndex; + } else if(U_FAILURE(*pErrorCode)) { + /* callback(illegal) */ + if(byteIndex>1) { + /* + * Ticket 5691: consistent illegal sequences: + * - We include at least the first byte in the illegal sequence. + * - If any of the non-initial bytes could be the start of a character, + * we stop the illegal sequence before the first one of those. + */ + UBool isDBCSOnly=(UBool)(cnv->sharedData->mbcs.dbcsOnlyState!=0); + int8_t i; + for(i=1; + i<byteIndex && !isSingleOrLead(stateTable, state, isDBCSOnly, bytes[i]); + ++i) {} + if(i<byteIndex) { + /* Back out some bytes. */ + int8_t backOutDistance=byteIndex-i; + int32_t bytesFromThisBuffer=(int32_t)(source-(const uint8_t *)pArgs->source); + byteIndex=i; /* length of reported illegal byte sequence */ + if(backOutDistance<=bytesFromThisBuffer) { + source-=backOutDistance; + } else { + /* Back out bytes from the previous buffer: Need to replay them. */ + cnv->preToULength=(int8_t)(bytesFromThisBuffer-backOutDistance); + /* preToULength is negative! */ + uprv_memcpy(cnv->preToU, bytes+i, -cnv->preToULength); + source=(const uint8_t *)pArgs->source; + } + } + } + break; + } else /* unassigned sequences indicated with byteIndex>0 */ { + /* try an extension mapping */ + pArgs->source=(const char *)source; + byteIndex=_extToU(cnv, cnv->sharedData, + byteIndex, &source, sourceLimit, + &target, targetLimit, + &offsets, sourceIndex, + pArgs->flush, + pErrorCode); + sourceIndex=nextSourceIndex+=(int32_t)(source-(const uint8_t *)pArgs->source); + + if(U_FAILURE(*pErrorCode)) { + /* not mappable or buffer overflow */ + break; + } + } + } + + /* set the converter state back into UConverter */ + cnv->toUnicodeStatus=offset; + cnv->mode=state; + cnv->toULength=byteIndex; + + /* write back the updated pointers */ + pArgs->source=(const char *)source; + pArgs->target=target; + pArgs->offsets=offsets; +} + +/* + * This version of ucnv_MBCSGetNextUChar() is optimized for single-byte, single-state codepages. + * We still need a conversion loop in case we find reserved action codes, which are to be ignored. + */ +static UChar32 +ucnv_MBCSSingleGetNextUChar(UConverterToUnicodeArgs *pArgs, + UErrorCode *pErrorCode) { + UConverter *cnv; + const int32_t (*stateTable)[256]; + const uint8_t *source, *sourceLimit; + + int32_t entry; + uint8_t action; + + /* set up the local pointers */ + cnv=pArgs->converter; + source=(const uint8_t *)pArgs->source; + sourceLimit=(const uint8_t *)pArgs->sourceLimit; + if((cnv->options&UCNV_OPTION_SWAP_LFNL)!=0) { + stateTable=(const int32_t (*)[256])cnv->sharedData->mbcs.swapLFNLStateTable; + } else { + stateTable=cnv->sharedData->mbcs.stateTable; + } + + /* conversion loop */ + while(source<sourceLimit) { + entry=stateTable[0][*source++]; + /* MBCS_ENTRY_IS_FINAL(entry) */ + + /* write back the updated pointer early so that we can return directly */ + pArgs->source=(const char *)source; + + if(MBCS_ENTRY_FINAL_IS_VALID_DIRECT_16(entry)) { + /* output BMP code point */ + return (UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + } + + /* + * An if-else-if chain provides more reliable performance for + * the most common cases compared to a switch. + */ + action=(uint8_t)(MBCS_ENTRY_FINAL_ACTION(entry)); + if( action==MBCS_STATE_VALID_DIRECT_20 || + (action==MBCS_STATE_FALLBACK_DIRECT_20 && UCNV_TO_U_USE_FALLBACK(cnv)) + ) { + /* output supplementary code point */ + return (UChar32)(MBCS_ENTRY_FINAL_VALUE(entry)+0x10000); + } else if(action==MBCS_STATE_FALLBACK_DIRECT_16) { + if(UCNV_TO_U_USE_FALLBACK(cnv)) { + /* output BMP code point */ + return (UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + } + } else if(action==MBCS_STATE_UNASSIGNED) { + /* just fall through */ + } else if(action==MBCS_STATE_ILLEGAL) { + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + } else { + /* reserved, must never occur */ + continue; + } + + if(U_FAILURE(*pErrorCode)) { + /* callback(illegal) */ + break; + } else /* unassigned sequence */ { + /* defer to the generic implementation */ + pArgs->source=(const char *)source-1; + return UCNV_GET_NEXT_UCHAR_USE_TO_U; + } + } + + /* no output because of empty input or only state changes */ + *pErrorCode=U_INDEX_OUTOFBOUNDS_ERROR; + return 0xffff; +} + +/* + * Version of _MBCSToUnicodeWithOffsets() optimized for single-character + * conversion without offset handling. + * + * When a character does not have a mapping to Unicode, then we return to the + * generic ucnv_getNextUChar() code for extension/GB 18030 and error/callback + * handling. + * We also defer to the generic code in other complicated cases and have them + * ultimately handled by _MBCSToUnicodeWithOffsets() itself. + * + * All normal mappings and errors are handled here. + */ +static UChar32 +ucnv_MBCSGetNextUChar(UConverterToUnicodeArgs *pArgs, + UErrorCode *pErrorCode) { + UConverter *cnv; + const uint8_t *source, *sourceLimit, *lastSource; + + const int32_t (*stateTable)[256]; + const uint16_t *unicodeCodeUnits; + + uint32_t offset; + uint8_t state; + + int32_t entry; + UChar32 c; + uint8_t action; + + /* use optimized function if possible */ + cnv=pArgs->converter; + + if(cnv->preToULength>0) { + /* use the generic code in ucnv_getNextUChar() to continue with a partial match */ + return UCNV_GET_NEXT_UCHAR_USE_TO_U; + } + + if(cnv->sharedData->mbcs.unicodeMask&UCNV_HAS_SURROGATES) { + /* + * Using the generic ucnv_getNextUChar() code lets us deal correctly + * with the rare case of a codepage that maps single surrogates + * without adding the complexity to this already complicated function here. + */ + return UCNV_GET_NEXT_UCHAR_USE_TO_U; + } else if(cnv->sharedData->mbcs.countStates==1) { + return ucnv_MBCSSingleGetNextUChar(pArgs, pErrorCode); + } + + /* set up the local pointers */ + source=lastSource=(const uint8_t *)pArgs->source; + sourceLimit=(const uint8_t *)pArgs->sourceLimit; + + if((cnv->options&UCNV_OPTION_SWAP_LFNL)!=0) { + stateTable=(const int32_t (*)[256])cnv->sharedData->mbcs.swapLFNLStateTable; + } else { + stateTable=cnv->sharedData->mbcs.stateTable; + } + unicodeCodeUnits=cnv->sharedData->mbcs.unicodeCodeUnits; + + /* get the converter state from UConverter */ + offset=cnv->toUnicodeStatus; + + /* + * if we are in the SBCS state for a DBCS-only converter, + * then load the DBCS state from the MBCS data + * (dbcsOnlyState==0 if it is not a DBCS-only converter) + */ + if((state=(uint8_t)(cnv->mode))==0) { + state=cnv->sharedData->mbcs.dbcsOnlyState; + } + + /* conversion loop */ + c=U_SENTINEL; + while(source<sourceLimit) { + entry=stateTable[state][*source++]; + if(MBCS_ENTRY_IS_TRANSITION(entry)) { + state=(uint8_t)MBCS_ENTRY_TRANSITION_STATE(entry); + offset+=MBCS_ENTRY_TRANSITION_OFFSET(entry); + + /* optimization for 1/2-byte input and BMP output */ + if( source<sourceLimit && + MBCS_ENTRY_IS_FINAL(entry=stateTable[state][*source]) && + MBCS_ENTRY_FINAL_ACTION(entry)==MBCS_STATE_VALID_16 && + (c=unicodeCodeUnits[offset+MBCS_ENTRY_FINAL_VALUE_16(entry)])<0xfffe + ) { + ++source; + state=(uint8_t)MBCS_ENTRY_FINAL_STATE(entry); /* typically 0 */ + /* output BMP code point */ + break; + } + } else { + /* save the previous state for proper extension mapping with SI/SO-stateful converters */ + cnv->mode=state; + + /* set the next state early so that we can reuse the entry variable */ + state=(uint8_t)MBCS_ENTRY_FINAL_STATE(entry); /* typically 0 */ + + /* + * An if-else-if chain provides more reliable performance for + * the most common cases compared to a switch. + */ + action=(uint8_t)(MBCS_ENTRY_FINAL_ACTION(entry)); + if(action==MBCS_STATE_VALID_DIRECT_16) { + /* output BMP code point */ + c=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + break; + } else if(action==MBCS_STATE_VALID_16) { + offset+=MBCS_ENTRY_FINAL_VALUE_16(entry); + c=unicodeCodeUnits[offset]; + if(c<0xfffe) { + /* output BMP code point */ + break; + } else if(c==0xfffe) { + if(UCNV_TO_U_USE_FALLBACK(cnv) && (c=ucnv_MBCSGetFallback(&cnv->sharedData->mbcs, offset))!=0xfffe) { + break; + } + } else { + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + } + } else if(action==MBCS_STATE_VALID_16_PAIR) { + offset+=MBCS_ENTRY_FINAL_VALUE_16(entry); + c=unicodeCodeUnits[offset++]; + if(c<0xd800) { + /* output BMP code point below 0xd800 */ + break; + } else if(UCNV_TO_U_USE_FALLBACK(cnv) ? c<=0xdfff : c<=0xdbff) { + /* output roundtrip or fallback supplementary code point */ + c=((c&0x3ff)<<10)+unicodeCodeUnits[offset]+(0x10000-0xdc00); + break; + } else if(UCNV_TO_U_USE_FALLBACK(cnv) ? (c&0xfffe)==0xe000 : c==0xe000) { + /* output roundtrip BMP code point above 0xd800 or fallback BMP code point */ + c=unicodeCodeUnits[offset]; + break; + } else if(c==0xffff) { + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + } + } else if(action==MBCS_STATE_VALID_DIRECT_20 || + (action==MBCS_STATE_FALLBACK_DIRECT_20 && UCNV_TO_U_USE_FALLBACK(cnv)) + ) { + /* output supplementary code point */ + c=(UChar32)(MBCS_ENTRY_FINAL_VALUE(entry)+0x10000); + break; + } else if(action==MBCS_STATE_CHANGE_ONLY) { + /* + * This serves as a state change without any output. + * It is useful for reading simple stateful encodings, + * for example using just Shift-In/Shift-Out codes. + * The 21 unused bits may later be used for more sophisticated + * state transitions. + */ + if(cnv->sharedData->mbcs.dbcsOnlyState!=0) { + /* SI/SO are illegal for DBCS-only conversion */ + state=(uint8_t)(cnv->mode); /* restore the previous state */ + + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + } + } else if(action==MBCS_STATE_FALLBACK_DIRECT_16) { + if(UCNV_TO_U_USE_FALLBACK(cnv)) { + /* output BMP code point */ + c=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + break; + } + } else if(action==MBCS_STATE_UNASSIGNED) { + /* just fall through */ + } else if(action==MBCS_STATE_ILLEGAL) { + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + } else { + /* reserved (must never occur), or only state change */ + offset=0; + lastSource=source; + continue; + } + + /* end of action codes: prepare for a new character */ + offset=0; + + if(U_FAILURE(*pErrorCode)) { + /* callback(illegal) */ + break; + } else /* unassigned sequence */ { + /* defer to the generic implementation */ + cnv->toUnicodeStatus=0; + cnv->mode=state; + pArgs->source=(const char *)lastSource; + return UCNV_GET_NEXT_UCHAR_USE_TO_U; + } + } + } + + if(c<0) { + if(U_SUCCESS(*pErrorCode) && source==sourceLimit && lastSource<source) { + /* incomplete character byte sequence */ + uint8_t *bytes=cnv->toUBytes; + cnv->toULength=(int8_t)(source-lastSource); + do { + *bytes++=*lastSource++; + } while(lastSource<source); + *pErrorCode=U_TRUNCATED_CHAR_FOUND; + } else if(U_FAILURE(*pErrorCode)) { + /* callback(illegal) */ + /* + * Ticket 5691: consistent illegal sequences: + * - We include at least the first byte in the illegal sequence. + * - If any of the non-initial bytes could be the start of a character, + * we stop the illegal sequence before the first one of those. + */ + UBool isDBCSOnly=(UBool)(cnv->sharedData->mbcs.dbcsOnlyState!=0); + uint8_t *bytes=cnv->toUBytes; + *bytes++=*lastSource++; /* first byte */ + if(lastSource==source) { + cnv->toULength=1; + } else /* lastSource<source: multi-byte character */ { + int8_t i; + for(i=1; + lastSource<source && !isSingleOrLead(stateTable, state, isDBCSOnly, *lastSource); + ++i + ) { + *bytes++=*lastSource++; + } + cnv->toULength=i; + source=lastSource; + } + } else { + /* no output because of empty input or only state changes */ + *pErrorCode=U_INDEX_OUTOFBOUNDS_ERROR; + } + c=0xffff; + } + + /* set the converter state back into UConverter, ready for a new character */ + cnv->toUnicodeStatus=0; + cnv->mode=state; + + /* write back the updated pointer */ + pArgs->source=(const char *)source; + return c; +} + +#if 0 +/* + * Code disabled 2002dec09 (ICU 2.4) because it is not currently used in ICU. markus + * Removal improves code coverage. + */ +/** + * This version of ucnv_MBCSSimpleGetNextUChar() is optimized for single-byte, single-state codepages. + * It does not handle the EBCDIC swaplfnl option (set in UConverter). + * It does not handle conversion extensions (_extToU()). + */ +U_CFUNC UChar32 +ucnv_MBCSSingleSimpleGetNextUChar(UConverterSharedData *sharedData, + uint8_t b, UBool useFallback) { + int32_t entry; + uint8_t action; + + entry=sharedData->mbcs.stateTable[0][b]; + /* MBCS_ENTRY_IS_FINAL(entry) */ + + if(MBCS_ENTRY_FINAL_IS_VALID_DIRECT_16(entry)) { + /* output BMP code point */ + return (UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + } + + /* + * An if-else-if chain provides more reliable performance for + * the most common cases compared to a switch. + */ + action=(uint8_t)(MBCS_ENTRY_FINAL_ACTION(entry)); + if(action==MBCS_STATE_VALID_DIRECT_20) { + /* output supplementary code point */ + return 0x10000+MBCS_ENTRY_FINAL_VALUE(entry); + } else if(action==MBCS_STATE_FALLBACK_DIRECT_16) { + if(!TO_U_USE_FALLBACK(useFallback)) { + return 0xfffe; + } + /* output BMP code point */ + return (UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + } else if(action==MBCS_STATE_FALLBACK_DIRECT_20) { + if(!TO_U_USE_FALLBACK(useFallback)) { + return 0xfffe; + } + /* output supplementary code point */ + return 0x10000+MBCS_ENTRY_FINAL_VALUE(entry); + } else if(action==MBCS_STATE_UNASSIGNED) { + return 0xfffe; + } else if(action==MBCS_STATE_ILLEGAL) { + return 0xffff; + } else { + /* reserved, must never occur */ + return 0xffff; + } +} +#endif + +/* + * This is a simple version of _MBCSGetNextUChar() that is used + * by other converter implementations. + * It only returns an "assigned" result if it consumes the entire input. + * It does not use state from the converter, nor error codes. + * It does not handle the EBCDIC swaplfnl option (set in UConverter). + * It handles conversion extensions but not GB 18030. + * + * Return value: + * U+fffe unassigned + * U+ffff illegal + * otherwise the Unicode code point + */ +U_CFUNC UChar32 +ucnv_MBCSSimpleGetNextUChar(UConverterSharedData *sharedData, + const char *source, int32_t length, + UBool useFallback) { + const int32_t (*stateTable)[256]; + const uint16_t *unicodeCodeUnits; + + uint32_t offset; + uint8_t state, action; + + UChar32 c; + int32_t i, entry; + + if(length<=0) { + /* no input at all: "illegal" */ + return 0xffff; + } + +#if 0 +/* + * Code disabled 2002dec09 (ICU 2.4) because it is not currently used in ICU. markus + * TODO In future releases, verify that this function is never called for SBCS + * conversions, i.e., that sharedData->mbcs.countStates==1 is still true. + * Removal improves code coverage. + */ + /* use optimized function if possible */ + if(sharedData->mbcs.countStates==1) { + if(length==1) { + return ucnv_MBCSSingleSimpleGetNextUChar(sharedData, (uint8_t)*source, useFallback); + } else { + return 0xffff; /* illegal: more than a single byte for an SBCS converter */ + } + } +#endif + + /* set up the local pointers */ + stateTable=sharedData->mbcs.stateTable; + unicodeCodeUnits=sharedData->mbcs.unicodeCodeUnits; + + /* converter state */ + offset=0; + state=sharedData->mbcs.dbcsOnlyState; + + /* conversion loop */ + for(i=0;;) { + entry=stateTable[state][(uint8_t)source[i++]]; + if(MBCS_ENTRY_IS_TRANSITION(entry)) { + state=(uint8_t)MBCS_ENTRY_TRANSITION_STATE(entry); + offset+=MBCS_ENTRY_TRANSITION_OFFSET(entry); + + if(i==length) { + return 0xffff; /* truncated character */ + } + } else { + /* + * An if-else-if chain provides more reliable performance for + * the most common cases compared to a switch. + */ + action=(uint8_t)(MBCS_ENTRY_FINAL_ACTION(entry)); + if(action==MBCS_STATE_VALID_16) { + offset+=MBCS_ENTRY_FINAL_VALUE_16(entry); + c=unicodeCodeUnits[offset]; + if(c!=0xfffe) { + /* done */ + } else if(UCNV_TO_U_USE_FALLBACK(cnv)) { + c=ucnv_MBCSGetFallback(&sharedData->mbcs, offset); + /* else done with 0xfffe */ + } + break; + } else if(action==MBCS_STATE_VALID_DIRECT_16) { + /* output BMP code point */ + c=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + break; + } else if(action==MBCS_STATE_VALID_16_PAIR) { + offset+=MBCS_ENTRY_FINAL_VALUE_16(entry); + c=unicodeCodeUnits[offset++]; + if(c<0xd800) { + /* output BMP code point below 0xd800 */ + } else if(UCNV_TO_U_USE_FALLBACK(cnv) ? c<=0xdfff : c<=0xdbff) { + /* output roundtrip or fallback supplementary code point */ + c=(UChar32)(((c&0x3ff)<<10)+unicodeCodeUnits[offset]+(0x10000-0xdc00)); + } else if(UCNV_TO_U_USE_FALLBACK(cnv) ? (c&0xfffe)==0xe000 : c==0xe000) { + /* output roundtrip BMP code point above 0xd800 or fallback BMP code point */ + c=unicodeCodeUnits[offset]; + } else if(c==0xffff) { + return 0xffff; + } else { + c=0xfffe; + } + break; + } else if(action==MBCS_STATE_VALID_DIRECT_20) { + /* output supplementary code point */ + c=0x10000+MBCS_ENTRY_FINAL_VALUE(entry); + break; + } else if(action==MBCS_STATE_FALLBACK_DIRECT_16) { + if(!TO_U_USE_FALLBACK(useFallback)) { + c=0xfffe; + break; + } + /* output BMP code point */ + c=(UChar)MBCS_ENTRY_FINAL_VALUE_16(entry); + break; + } else if(action==MBCS_STATE_FALLBACK_DIRECT_20) { + if(!TO_U_USE_FALLBACK(useFallback)) { + c=0xfffe; + break; + } + /* output supplementary code point */ + c=0x10000+MBCS_ENTRY_FINAL_VALUE(entry); + break; + } else if(action==MBCS_STATE_UNASSIGNED) { + c=0xfffe; + break; + } + + /* + * forbid MBCS_STATE_CHANGE_ONLY for this function, + * and MBCS_STATE_ILLEGAL and reserved action codes + */ + return 0xffff; + } + } + + if(i!=length) { + /* illegal for this function: not all input consumed */ + return 0xffff; + } + + if(c==0xfffe) { + /* try an extension mapping */ + const int32_t *cx=sharedData->mbcs.extIndexes; + if(cx!=NULL) { + return ucnv_extSimpleMatchToU(cx, source, length, useFallback); + } + } + + return c; +} + +/* MBCS-from-Unicode conversion functions ----------------------------------- */ + +/* This version of ucnv_MBCSFromUnicodeWithOffsets() is optimized for double-byte codepages. */ +static void +ucnv_MBCSDoubleFromUnicodeWithOffsets(UConverterFromUnicodeArgs *pArgs, + UErrorCode *pErrorCode) { + UConverter *cnv; + const UChar *source, *sourceLimit; + uint8_t *target; + int32_t targetCapacity; + int32_t *offsets; + + const uint16_t *table; + const uint16_t *mbcsIndex; + const uint8_t *bytes; + + UChar32 c; + + int32_t sourceIndex, nextSourceIndex; + + uint32_t stage2Entry; + uint32_t asciiRoundtrips; + uint32_t value; + uint8_t unicodeMask; + + /* use optimized function if possible */ + cnv=pArgs->converter; + unicodeMask=cnv->sharedData->mbcs.unicodeMask; + + /* set up the local pointers */ + source=pArgs->source; + sourceLimit=pArgs->sourceLimit; + target=(uint8_t *)pArgs->target; + targetCapacity=(int32_t)(pArgs->targetLimit-pArgs->target); + offsets=pArgs->offsets; + + table=cnv->sharedData->mbcs.fromUnicodeTable; + mbcsIndex=cnv->sharedData->mbcs.mbcsIndex; + if((cnv->options&UCNV_OPTION_SWAP_LFNL)!=0) { + bytes=cnv->sharedData->mbcs.swapLFNLFromUnicodeBytes; + } else { + bytes=cnv->sharedData->mbcs.fromUnicodeBytes; + } + asciiRoundtrips=cnv->sharedData->mbcs.asciiRoundtrips; + + /* get the converter state from UConverter */ + c=cnv->fromUChar32; + + /* sourceIndex=-1 if the current character began in the previous buffer */ + sourceIndex= c==0 ? 0 : -1; + nextSourceIndex=0; + + /* conversion loop */ + if(c!=0 && targetCapacity>0) { + goto getTrail; + } + + while(source<sourceLimit) { + /* + * This following test is to see if available input would overflow the output. + * It does not catch output of more than one byte that + * overflows as a result of a multi-byte character or callback output + * from the last source character. + * Therefore, those situations also test for overflows and will + * then break the loop, too. + */ + if(targetCapacity>0) { + /* + * Get a correct Unicode code point: + * a single UChar for a BMP code point or + * a matched surrogate pair for a "supplementary code point". + */ + c=*source++; + ++nextSourceIndex; + if(c<=0x7f && IS_ASCII_ROUNDTRIP(c, asciiRoundtrips)) { + *target++=(uint8_t)c; + if(offsets!=NULL) { + *offsets++=sourceIndex; + sourceIndex=nextSourceIndex; + } + --targetCapacity; + c=0; + continue; + } + /* + * utf8Friendly table: Test for <=0xd7ff rather than <=MBCS_FAST_MAX + * to avoid dealing with surrogates. + * MBCS_FAST_MAX must be >=0xd7ff. + */ + if(c<=0xd7ff) { + value=DBCS_RESULT_FROM_MOST_BMP(mbcsIndex, (const uint16_t *)bytes, c); + /* There are only roundtrips (!=0) and no-mapping (==0) entries. */ + if(value==0) { + goto unassigned; + } + /* output the value */ + } else { + /* + * This also tests if the codepage maps single surrogates. + * If it does, then surrogates are not paired but mapped separately. + * Note that in this case unmatched surrogates are not detected. + */ + if(U16_IS_SURROGATE(c) && !(unicodeMask&UCNV_HAS_SURROGATES)) { + if(U16_IS_SURROGATE_LEAD(c)) { +getTrail: + if(source<sourceLimit) { + /* test the following code unit */ + UChar trail=*source; + if(U16_IS_TRAIL(trail)) { + ++source; + ++nextSourceIndex; + c=U16_GET_SUPPLEMENTARY(c, trail); + if(!(unicodeMask&UCNV_HAS_SUPPLEMENTARY)) { + /* BMP-only codepages are stored without stage 1 entries for supplementary code points */ + /* callback(unassigned) */ + goto unassigned; + } + /* convert this supplementary code point */ + /* exit this condition tree */ + } else { + /* this is an unmatched lead code unit (1st surrogate) */ + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + break; + } + } else { + /* no more input */ + break; + } + } else { + /* this is an unmatched trail code unit (2nd surrogate) */ + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + break; + } + } + + /* convert the Unicode code point in c into codepage bytes */ + stage2Entry=MBCS_STAGE_2_FROM_U(table, c); + + /* get the bytes and the length for the output */ + /* MBCS_OUTPUT_2 */ + value=MBCS_VALUE_2_FROM_STAGE_2(bytes, stage2Entry, c); + + /* is this code point assigned, or do we use fallbacks? */ + if(!(MBCS_FROM_U_IS_ROUNDTRIP(stage2Entry, c) || + (UCNV_FROM_U_USE_FALLBACK(cnv, c) && value!=0)) + ) { + /* + * We allow a 0 byte output if the "assigned" bit is set for this entry. + * There is no way with this data structure for fallback output + * to be a zero byte. + */ + +unassigned: + /* try an extension mapping */ + pArgs->source=source; + c=_extFromU(cnv, cnv->sharedData, + c, &source, sourceLimit, + &target, target+targetCapacity, + &offsets, sourceIndex, + pArgs->flush, + pErrorCode); + nextSourceIndex+=(int32_t)(source-pArgs->source); + + if(U_FAILURE(*pErrorCode)) { + /* not mappable or buffer overflow */ + break; + } else { + /* a mapping was written to the target, continue */ + + /* recalculate the targetCapacity after an extension mapping */ + targetCapacity=(int32_t)(pArgs->targetLimit-(char *)target); + + /* normal end of conversion: prepare for a new character */ + sourceIndex=nextSourceIndex; + continue; + } + } + } + + /* write the output character bytes from value and length */ + /* from the first if in the loop we know that targetCapacity>0 */ + if(value<=0xff) { + /* this is easy because we know that there is enough space */ + *target++=(uint8_t)value; + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + --targetCapacity; + } else /* length==2 */ { + *target++=(uint8_t)(value>>8); + if(2<=targetCapacity) { + *target++=(uint8_t)value; + if(offsets!=NULL) { + *offsets++=sourceIndex; + *offsets++=sourceIndex; + } + targetCapacity-=2; + } else { + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + cnv->charErrorBuffer[0]=(char)value; + cnv->charErrorBufferLength=1; + + /* target overflow */ + targetCapacity=0; + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + c=0; + break; + } + } + + /* normal end of conversion: prepare for a new character */ + c=0; + sourceIndex=nextSourceIndex; + continue; + } else { + /* target is full */ + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + break; + } + } + + /* set the converter state back into UConverter */ + cnv->fromUChar32=c; + + /* write back the updated pointers */ + pArgs->source=source; + pArgs->target=(char *)target; + pArgs->offsets=offsets; +} + +/* This version of ucnv_MBCSFromUnicodeWithOffsets() is optimized for single-byte codepages. */ +static void +ucnv_MBCSSingleFromUnicodeWithOffsets(UConverterFromUnicodeArgs *pArgs, + UErrorCode *pErrorCode) { + UConverter *cnv; + const UChar *source, *sourceLimit; + uint8_t *target; + int32_t targetCapacity; + int32_t *offsets; + + const uint16_t *table; + const uint16_t *results; + + UChar32 c; + + int32_t sourceIndex, nextSourceIndex; + + uint16_t value, minValue; + UBool hasSupplementary; + + /* set up the local pointers */ + cnv=pArgs->converter; + source=pArgs->source; + sourceLimit=pArgs->sourceLimit; + target=(uint8_t *)pArgs->target; + targetCapacity=(int32_t)(pArgs->targetLimit-pArgs->target); + offsets=pArgs->offsets; + + table=cnv->sharedData->mbcs.fromUnicodeTable; + if((cnv->options&UCNV_OPTION_SWAP_LFNL)!=0) { + results=(uint16_t *)cnv->sharedData->mbcs.swapLFNLFromUnicodeBytes; + } else { + results=(uint16_t *)cnv->sharedData->mbcs.fromUnicodeBytes; + } + + if(cnv->useFallback) { + /* use all roundtrip and fallback results */ + minValue=0x800; + } else { + /* use only roundtrips and fallbacks from private-use characters */ + minValue=0xc00; + } + hasSupplementary=(UBool)(cnv->sharedData->mbcs.unicodeMask&UCNV_HAS_SUPPLEMENTARY); + + /* get the converter state from UConverter */ + c=cnv->fromUChar32; + + /* sourceIndex=-1 if the current character began in the previous buffer */ + sourceIndex= c==0 ? 0 : -1; + nextSourceIndex=0; + + /* conversion loop */ + if(c!=0 && targetCapacity>0) { + goto getTrail; + } + + while(source<sourceLimit) { + /* + * This following test is to see if available input would overflow the output. + * It does not catch output of more than one byte that + * overflows as a result of a multi-byte character or callback output + * from the last source character. + * Therefore, those situations also test for overflows and will + * then break the loop, too. + */ + if(targetCapacity>0) { + /* + * Get a correct Unicode code point: + * a single UChar for a BMP code point or + * a matched surrogate pair for a "supplementary code point". + */ + c=*source++; + ++nextSourceIndex; + if(U16_IS_SURROGATE(c)) { + if(U16_IS_SURROGATE_LEAD(c)) { +getTrail: + if(source<sourceLimit) { + /* test the following code unit */ + UChar trail=*source; + if(U16_IS_TRAIL(trail)) { + ++source; + ++nextSourceIndex; + c=U16_GET_SUPPLEMENTARY(c, trail); + if(!hasSupplementary) { + /* BMP-only codepages are stored without stage 1 entries for supplementary code points */ + /* callback(unassigned) */ + goto unassigned; + } + /* convert this supplementary code point */ + /* exit this condition tree */ + } else { + /* this is an unmatched lead code unit (1st surrogate) */ + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + break; + } + } else { + /* no more input */ + break; + } + } else { + /* this is an unmatched trail code unit (2nd surrogate) */ + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + break; + } + } + + /* convert the Unicode code point in c into codepage bytes */ + value=MBCS_SINGLE_RESULT_FROM_U(table, results, c); + + /* is this code point assigned, or do we use fallbacks? */ + if(value>=minValue) { + /* assigned, write the output character bytes from value and length */ + /* length==1 */ + /* this is easy because we know that there is enough space */ + *target++=(uint8_t)value; + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + --targetCapacity; + + /* normal end of conversion: prepare for a new character */ + c=0; + sourceIndex=nextSourceIndex; + } else { /* unassigned */ +unassigned: + /* try an extension mapping */ + pArgs->source=source; + c=_extFromU(cnv, cnv->sharedData, + c, &source, sourceLimit, + &target, target+targetCapacity, + &offsets, sourceIndex, + pArgs->flush, + pErrorCode); + nextSourceIndex+=(int32_t)(source-pArgs->source); + + if(U_FAILURE(*pErrorCode)) { + /* not mappable or buffer overflow */ + break; + } else { + /* a mapping was written to the target, continue */ + + /* recalculate the targetCapacity after an extension mapping */ + targetCapacity=(int32_t)(pArgs->targetLimit-(char *)target); + + /* normal end of conversion: prepare for a new character */ + sourceIndex=nextSourceIndex; + } + } + } else { + /* target is full */ + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + break; + } + } + + /* set the converter state back into UConverter */ + cnv->fromUChar32=c; + + /* write back the updated pointers */ + pArgs->source=source; + pArgs->target=(char *)target; + pArgs->offsets=offsets; +} + +/* + * This version of ucnv_MBCSFromUnicode() is optimized for single-byte codepages + * that map only to and from the BMP. + * In addition to single-byte/state optimizations, the offset calculations + * become much easier. + * It would be possible to use the sbcsIndex for UTF-8-friendly tables, + * but measurements have shown that this diminishes performance + * in more cases than it improves it. + * See SVN revision 21013 (2007-feb-06) for the last version with #if switches + * for various MBCS and SBCS optimizations. + */ +static void +ucnv_MBCSSingleFromBMPWithOffsets(UConverterFromUnicodeArgs *pArgs, + UErrorCode *pErrorCode) { + UConverter *cnv; + const UChar *source, *sourceLimit, *lastSource; + uint8_t *target; + int32_t targetCapacity, length; + int32_t *offsets; + + const uint16_t *table; + const uint16_t *results; + + UChar32 c; + + int32_t sourceIndex; + + uint32_t asciiRoundtrips; + uint16_t value, minValue; + + /* set up the local pointers */ + cnv=pArgs->converter; + source=pArgs->source; + sourceLimit=pArgs->sourceLimit; + target=(uint8_t *)pArgs->target; + targetCapacity=(int32_t)(pArgs->targetLimit-pArgs->target); + offsets=pArgs->offsets; + + table=cnv->sharedData->mbcs.fromUnicodeTable; + if((cnv->options&UCNV_OPTION_SWAP_LFNL)!=0) { + results=(uint16_t *)cnv->sharedData->mbcs.swapLFNLFromUnicodeBytes; + } else { + results=(uint16_t *)cnv->sharedData->mbcs.fromUnicodeBytes; + } + asciiRoundtrips=cnv->sharedData->mbcs.asciiRoundtrips; + + if(cnv->useFallback) { + /* use all roundtrip and fallback results */ + minValue=0x800; + } else { + /* use only roundtrips and fallbacks from private-use characters */ + minValue=0xc00; + } + + /* get the converter state from UConverter */ + c=cnv->fromUChar32; + + /* sourceIndex=-1 if the current character began in the previous buffer */ + sourceIndex= c==0 ? 0 : -1; + lastSource=source; + + /* + * since the conversion here is 1:1 UChar:uint8_t, we need only one counter + * for the minimum of the sourceLength and targetCapacity + */ + length=(int32_t)(sourceLimit-source); + if(length<targetCapacity) { + targetCapacity=length; + } + + /* conversion loop */ + if(c!=0 && targetCapacity>0) { + goto getTrail; + } + +#if MBCS_UNROLL_SINGLE_FROM_BMP + /* unrolling makes it slower on Pentium III/Windows 2000?! */ + /* unroll the loop with the most common case */ +unrolled: + if(targetCapacity>=4) { + int32_t count, loops; + uint16_t andedValues; + + loops=count=targetCapacity>>2; + do { + c=*source++; + andedValues=value=MBCS_SINGLE_RESULT_FROM_U(table, results, c); + *target++=(uint8_t)value; + c=*source++; + andedValues&=value=MBCS_SINGLE_RESULT_FROM_U(table, results, c); + *target++=(uint8_t)value; + c=*source++; + andedValues&=value=MBCS_SINGLE_RESULT_FROM_U(table, results, c); + *target++=(uint8_t)value; + c=*source++; + andedValues&=value=MBCS_SINGLE_RESULT_FROM_U(table, results, c); + *target++=(uint8_t)value; + + /* were all 4 entries really valid? */ + if(andedValues<minValue) { + /* no, return to the first of these 4 */ + source-=4; + target-=4; + break; + } + } while(--count>0); + count=loops-count; + targetCapacity-=4*count; + + if(offsets!=NULL) { + lastSource+=4*count; + while(count>0) { + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + *offsets++=sourceIndex++; + --count; + } + } + + c=0; + } +#endif + + while(targetCapacity>0) { + /* + * Get a correct Unicode code point: + * a single UChar for a BMP code point or + * a matched surrogate pair for a "supplementary code point". + */ + c=*source++; + /* + * Do not immediately check for single surrogates: + * Assume that they are unassigned and check for them in that case. + * This speeds up the conversion of assigned characters. + */ + /* convert the Unicode code point in c into codepage bytes */ + if(c<=0x7f && IS_ASCII_ROUNDTRIP(c, asciiRoundtrips)) { + *target++=(uint8_t)c; + --targetCapacity; + c=0; + continue; + } + value=MBCS_SINGLE_RESULT_FROM_U(table, results, c); + /* is this code point assigned, or do we use fallbacks? */ + if(value>=minValue) { + /* assigned, write the output character bytes from value and length */ + /* length==1 */ + /* this is easy because we know that there is enough space */ + *target++=(uint8_t)value; + --targetCapacity; + + /* normal end of conversion: prepare for a new character */ + c=0; + continue; + } else if(!U16_IS_SURROGATE(c)) { + /* normal, unassigned BMP character */ + } else if(U16_IS_SURROGATE_LEAD(c)) { +getTrail: + if(source<sourceLimit) { + /* test the following code unit */ + UChar trail=*source; + if(U16_IS_TRAIL(trail)) { + ++source; + c=U16_GET_SUPPLEMENTARY(c, trail); + /* this codepage does not map supplementary code points */ + /* callback(unassigned) */ + } else { + /* this is an unmatched lead code unit (1st surrogate) */ + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + break; + } + } else { + /* no more input */ + if (pArgs->flush) { + *pErrorCode=U_TRUNCATED_CHAR_FOUND; + } + break; + } + } else { + /* this is an unmatched trail code unit (2nd surrogate) */ + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + break; + } + + /* c does not have a mapping */ + + /* get the number of code units for c to correctly advance sourceIndex */ + length=U16_LENGTH(c); + + /* set offsets since the start or the last extension */ + if(offsets!=NULL) { + int32_t count=(int32_t)(source-lastSource); + + /* do not set the offset for this character */ + count-=length; + + while(count>0) { + *offsets++=sourceIndex++; + --count; + } + /* offsets and sourceIndex are now set for the current character */ + } + + /* try an extension mapping */ + lastSource=source; + c=_extFromU(cnv, cnv->sharedData, + c, &source, sourceLimit, + &target, (const uint8_t *)(pArgs->targetLimit), + &offsets, sourceIndex, + pArgs->flush, + pErrorCode); + sourceIndex+=length+(int32_t)(source-lastSource); + lastSource=source; + + if(U_FAILURE(*pErrorCode)) { + /* not mappable or buffer overflow */ + break; + } else { + /* a mapping was written to the target, continue */ + + /* recalculate the targetCapacity after an extension mapping */ + targetCapacity=(int32_t)(pArgs->targetLimit-(char *)target); + length=(int32_t)(sourceLimit-source); + if(length<targetCapacity) { + targetCapacity=length; + } + } + +#if MBCS_UNROLL_SINGLE_FROM_BMP + /* unrolling makes it slower on Pentium III/Windows 2000?! */ + goto unrolled; +#endif + } + + if(U_SUCCESS(*pErrorCode) && source<sourceLimit && target>=(uint8_t *)pArgs->targetLimit) { + /* target is full */ + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + } + + /* set offsets since the start or the last callback */ + if(offsets!=NULL) { + size_t count=source-lastSource; + if (count > 0 && *pErrorCode == U_TRUNCATED_CHAR_FOUND) { + /* + Caller gave us a partial supplementary character, + which this function couldn't convert in any case. + The callback will handle the offset. + */ + count--; + } + while(count>0) { + *offsets++=sourceIndex++; + --count; + } + } + + /* set the converter state back into UConverter */ + cnv->fromUChar32=c; + + /* write back the updated pointers */ + pArgs->source=source; + pArgs->target=(char *)target; + pArgs->offsets=offsets; +} + +U_CFUNC void +ucnv_MBCSFromUnicodeWithOffsets(UConverterFromUnicodeArgs *pArgs, + UErrorCode *pErrorCode) { + UConverter *cnv; + const UChar *source, *sourceLimit; + uint8_t *target; + int32_t targetCapacity; + int32_t *offsets; + + const uint16_t *table; + const uint16_t *mbcsIndex; + const uint8_t *p, *bytes; + uint8_t outputType; + + UChar32 c; + + int32_t prevSourceIndex, sourceIndex, nextSourceIndex; + + uint32_t stage2Entry; + uint32_t asciiRoundtrips; + uint32_t value; + /* Shift-In and Shift-Out byte sequences differ by encoding scheme. */ + uint8_t siBytes[2] = {0, 0}; + uint8_t soBytes[2] = {0, 0}; + uint8_t siLength, soLength; + int32_t length = 0, prevLength; + uint8_t unicodeMask; + + cnv=pArgs->converter; + + if(cnv->preFromUFirstCP>=0) { + /* + * pass sourceIndex=-1 because we continue from an earlier buffer + * in the future, this may change with continuous offsets + */ + ucnv_extContinueMatchFromU(cnv, pArgs, -1, pErrorCode); + + if(U_FAILURE(*pErrorCode) || cnv->preFromULength<0) { + return; + } + } + + /* use optimized function if possible */ + outputType=cnv->sharedData->mbcs.outputType; + unicodeMask=cnv->sharedData->mbcs.unicodeMask; + if(outputType==MBCS_OUTPUT_1 && !(unicodeMask&UCNV_HAS_SURROGATES)) { + if(!(unicodeMask&UCNV_HAS_SUPPLEMENTARY)) { + ucnv_MBCSSingleFromBMPWithOffsets(pArgs, pErrorCode); + } else { + ucnv_MBCSSingleFromUnicodeWithOffsets(pArgs, pErrorCode); + } + return; + } else if(outputType==MBCS_OUTPUT_2 && cnv->sharedData->mbcs.utf8Friendly) { + ucnv_MBCSDoubleFromUnicodeWithOffsets(pArgs, pErrorCode); + return; + } + + /* set up the local pointers */ + source=pArgs->source; + sourceLimit=pArgs->sourceLimit; + target=(uint8_t *)pArgs->target; + targetCapacity=(int32_t)(pArgs->targetLimit-pArgs->target); + offsets=pArgs->offsets; + + table=cnv->sharedData->mbcs.fromUnicodeTable; + if(cnv->sharedData->mbcs.utf8Friendly) { + mbcsIndex=cnv->sharedData->mbcs.mbcsIndex; + } else { + mbcsIndex=NULL; + } + if((cnv->options&UCNV_OPTION_SWAP_LFNL)!=0) { + bytes=cnv->sharedData->mbcs.swapLFNLFromUnicodeBytes; + } else { + bytes=cnv->sharedData->mbcs.fromUnicodeBytes; + } + asciiRoundtrips=cnv->sharedData->mbcs.asciiRoundtrips; + + /* get the converter state from UConverter */ + c=cnv->fromUChar32; + + if(outputType==MBCS_OUTPUT_2_SISO) { + prevLength=cnv->fromUnicodeStatus; + if(prevLength==0) { + /* set the real value */ + prevLength=1; + } + } else { + /* prevent fromUnicodeStatus from being set to something non-0 */ + prevLength=0; + } + + /* sourceIndex=-1 if the current character began in the previous buffer */ + prevSourceIndex=-1; + sourceIndex= c==0 ? 0 : -1; + nextSourceIndex=0; + + /* Get the SI/SO character for the converter */ + siLength = getSISOBytes(SI, cnv->options, siBytes); + soLength = getSISOBytes(SO, cnv->options, soBytes); + + /* conversion loop */ + /* + * This is another piece of ugly code: + * A goto into the loop if the converter state contains a first surrogate + * from the previous function call. + * It saves me to check in each loop iteration a check of if(c==0) + * and duplicating the trail-surrogate-handling code in the else + * branch of that check. + * I could not find any other way to get around this other than + * using a function call for the conversion and callback, which would + * be even more inefficient. + * + * Markus Scherer 2000-jul-19 + */ + if(c!=0 && targetCapacity>0) { + goto getTrail; + } + + while(source<sourceLimit) { + /* + * This following test is to see if available input would overflow the output. + * It does not catch output of more than one byte that + * overflows as a result of a multi-byte character or callback output + * from the last source character. + * Therefore, those situations also test for overflows and will + * then break the loop, too. + */ + if(targetCapacity>0) { + /* + * Get a correct Unicode code point: + * a single UChar for a BMP code point or + * a matched surrogate pair for a "supplementary code point". + */ + c=*source++; + ++nextSourceIndex; + if(c<=0x7f && IS_ASCII_ROUNDTRIP(c, asciiRoundtrips)) { + *target++=(uint8_t)c; + if(offsets!=NULL) { + *offsets++=sourceIndex; + prevSourceIndex=sourceIndex; + sourceIndex=nextSourceIndex; + } + --targetCapacity; + c=0; + continue; + } + /* + * utf8Friendly table: Test for <=0xd7ff rather than <=MBCS_FAST_MAX + * to avoid dealing with surrogates. + * MBCS_FAST_MAX must be >=0xd7ff. + */ + if(c<=0xd7ff && mbcsIndex!=NULL) { + value=mbcsIndex[c>>6]; + + /* get the bytes and the length for the output (copied from below and adapted for utf8Friendly data) */ + /* There are only roundtrips (!=0) and no-mapping (==0) entries. */ + switch(outputType) { + case MBCS_OUTPUT_2: + value=((const uint16_t *)bytes)[value +(c&0x3f)]; + if(value<=0xff) { + if(value==0) { + goto unassigned; + } else { + length=1; + } + } else { + length=2; + } + break; + case MBCS_OUTPUT_2_SISO: + /* 1/2-byte stateful with Shift-In/Shift-Out */ + /* + * Save the old state in the converter object + * right here, then change the local prevLength state variable if necessary. + * Then, if this character turns out to be unassigned or a fallback that + * is not taken, the callback code must not save the new state in the converter + * because the new state is for a character that is not output. + * However, the callback must still restore the state from the converter + * in case the callback function changed it for its output. + */ + cnv->fromUnicodeStatus=prevLength; /* save the old state */ + value=((const uint16_t *)bytes)[value +(c&0x3f)]; + if(value<=0xff) { + if(value==0) { + goto unassigned; + } else if(prevLength<=1) { + length=1; + } else { + /* change from double-byte mode to single-byte */ + if (siLength == 1) { + value|=(uint32_t)siBytes[0]<<8; + length = 2; + } else if (siLength == 2) { + value|=(uint32_t)siBytes[1]<<8; + value|=(uint32_t)siBytes[0]<<16; + length = 3; + } + prevLength=1; + } + } else { + if(prevLength==2) { + length=2; + } else { + /* change from single-byte mode to double-byte */ + if (soLength == 1) { + value|=(uint32_t)soBytes[0]<<16; + length = 3; + } else if (soLength == 2) { + value|=(uint32_t)soBytes[1]<<16; + value|=(uint32_t)soBytes[0]<<24; + length = 4; + } + prevLength=2; + } + } + break; + case MBCS_OUTPUT_DBCS_ONLY: + /* table with single-byte results, but only DBCS mappings used */ + value=((const uint16_t *)bytes)[value +(c&0x3f)]; + if(value<=0xff) { + /* no mapping or SBCS result, not taken for DBCS-only */ + goto unassigned; + } else { + length=2; + } + break; + case MBCS_OUTPUT_3: + p=bytes+(value+(c&0x3f))*3; + value=((uint32_t)*p<<16)|((uint32_t)p[1]<<8)|p[2]; + if(value<=0xff) { + if(value==0) { + goto unassigned; + } else { + length=1; + } + } else if(value<=0xffff) { + length=2; + } else { + length=3; + } + break; + case MBCS_OUTPUT_4: + value=((const uint32_t *)bytes)[value +(c&0x3f)]; + if(value<=0xff) { + if(value==0) { + goto unassigned; + } else { + length=1; + } + } else if(value<=0xffff) { + length=2; + } else if(value<=0xffffff) { + length=3; + } else { + length=4; + } + break; + case MBCS_OUTPUT_3_EUC: + value=((const uint16_t *)bytes)[value +(c&0x3f)]; + /* EUC 16-bit fixed-length representation */ + if(value<=0xff) { + if(value==0) { + goto unassigned; + } else { + length=1; + } + } else if((value&0x8000)==0) { + value|=0x8e8000; + length=3; + } else if((value&0x80)==0) { + value|=0x8f0080; + length=3; + } else { + length=2; + } + break; + case MBCS_OUTPUT_4_EUC: + p=bytes+(value+(c&0x3f))*3; + value=((uint32_t)*p<<16)|((uint32_t)p[1]<<8)|p[2]; + /* EUC 16-bit fixed-length representation applied to the first two bytes */ + if(value<=0xff) { + if(value==0) { + goto unassigned; + } else { + length=1; + } + } else if(value<=0xffff) { + length=2; + } else if((value&0x800000)==0) { + value|=0x8e800000; + length=4; + } else if((value&0x8000)==0) { + value|=0x8f008000; + length=4; + } else { + length=3; + } + break; + default: + /* must not occur */ + /* + * To avoid compiler warnings that value & length may be + * used without having been initialized, we set them here. + * In reality, this is unreachable code. + * Not having a default branch also causes warnings with + * some compilers. + */ + value=0; + length=0; + break; + } + /* output the value */ + } else { + /* + * This also tests if the codepage maps single surrogates. + * If it does, then surrogates are not paired but mapped separately. + * Note that in this case unmatched surrogates are not detected. + */ + if(U16_IS_SURROGATE(c) && !(unicodeMask&UCNV_HAS_SURROGATES)) { + if(U16_IS_SURROGATE_LEAD(c)) { +getTrail: + if(source<sourceLimit) { + /* test the following code unit */ + UChar trail=*source; + if(U16_IS_TRAIL(trail)) { + ++source; + ++nextSourceIndex; + c=U16_GET_SUPPLEMENTARY(c, trail); + if(!(unicodeMask&UCNV_HAS_SUPPLEMENTARY)) { + /* BMP-only codepages are stored without stage 1 entries for supplementary code points */ + cnv->fromUnicodeStatus=prevLength; /* save the old state */ + /* callback(unassigned) */ + goto unassigned; + } + /* convert this supplementary code point */ + /* exit this condition tree */ + } else { + /* this is an unmatched lead code unit (1st surrogate) */ + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + break; + } + } else { + /* no more input */ + break; + } + } else { + /* this is an unmatched trail code unit (2nd surrogate) */ + /* callback(illegal) */ + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + break; + } + } + + /* convert the Unicode code point in c into codepage bytes */ + + /* + * The basic lookup is a triple-stage compact array (trie) lookup. + * For details see the beginning of this file. + * + * Single-byte codepages are handled with a different data structure + * by _MBCSSingle... functions. + * + * The result consists of a 32-bit value from stage 2 and + * a pointer to as many bytes as are stored per character. + * The pointer points to the character's bytes in stage 3. + * Bits 15..0 of the stage 2 entry contain the stage 3 index + * for that pointer, while bits 31..16 are flags for which of + * the 16 characters in the block are roundtrip-assigned. + * + * For 2-byte and 4-byte codepages, the bytes are stored as uint16_t + * respectively as uint32_t, in the platform encoding. + * For 3-byte codepages, the bytes are always stored in big-endian order. + * + * For EUC encodings that use only either 0x8e or 0x8f as the first + * byte of their longest byte sequences, the first two bytes in + * this third stage indicate with their 7th bits whether these bytes + * are to be written directly or actually need to be preceeded by + * one of the two Single-Shift codes. With this, the third stage + * stores one byte fewer per character than the actual maximum length of + * EUC byte sequences. + * + * Other than that, leading zero bytes are removed and the other + * bytes output. A single zero byte may be output if the "assigned" + * bit in stage 2 was on. + * The data structure does not support zero byte output as a fallback, + * and also does not allow output of leading zeros. + */ + stage2Entry=MBCS_STAGE_2_FROM_U(table, c); + + /* get the bytes and the length for the output */ + switch(outputType) { + case MBCS_OUTPUT_2: + value=MBCS_VALUE_2_FROM_STAGE_2(bytes, stage2Entry, c); + if(value<=0xff) { + length=1; + } else { + length=2; + } + break; + case MBCS_OUTPUT_2_SISO: + /* 1/2-byte stateful with Shift-In/Shift-Out */ + /* + * Save the old state in the converter object + * right here, then change the local prevLength state variable if necessary. + * Then, if this character turns out to be unassigned or a fallback that + * is not taken, the callback code must not save the new state in the converter + * because the new state is for a character that is not output. + * However, the callback must still restore the state from the converter + * in case the callback function changed it for its output. + */ + cnv->fromUnicodeStatus=prevLength; /* save the old state */ + value=MBCS_VALUE_2_FROM_STAGE_2(bytes, stage2Entry, c); + if(value<=0xff) { + if(value==0 && MBCS_FROM_U_IS_ROUNDTRIP(stage2Entry, c)==0) { + /* no mapping, leave value==0 */ + length=0; + } else if(prevLength<=1) { + length=1; + } else { + /* change from double-byte mode to single-byte */ + if (siLength == 1) { + value|=(uint32_t)siBytes[0]<<8; + length = 2; + } else if (siLength == 2) { + value|=(uint32_t)siBytes[1]<<8; + value|=(uint32_t)siBytes[0]<<16; + length = 3; + } + prevLength=1; + } + } else { + if(prevLength==2) { + length=2; + } else { + /* change from single-byte mode to double-byte */ + if (soLength == 1) { + value|=(uint32_t)soBytes[0]<<16; + length = 3; + } else if (soLength == 2) { + value|=(uint32_t)soBytes[1]<<16; + value|=(uint32_t)soBytes[0]<<24; + length = 4; + } + prevLength=2; + } + } + break; + case MBCS_OUTPUT_DBCS_ONLY: + /* table with single-byte results, but only DBCS mappings used */ + value=MBCS_VALUE_2_FROM_STAGE_2(bytes, stage2Entry, c); + if(value<=0xff) { + /* no mapping or SBCS result, not taken for DBCS-only */ + value=stage2Entry=0; /* stage2Entry=0 to reset roundtrip flags */ + length=0; + } else { + length=2; + } + break; + case MBCS_OUTPUT_3: + p=MBCS_POINTER_3_FROM_STAGE_2(bytes, stage2Entry, c); + value=((uint32_t)*p<<16)|((uint32_t)p[1]<<8)|p[2]; + if(value<=0xff) { + length=1; + } else if(value<=0xffff) { + length=2; + } else { + length=3; + } + break; + case MBCS_OUTPUT_4: + value=MBCS_VALUE_4_FROM_STAGE_2(bytes, stage2Entry, c); + if(value<=0xff) { + length=1; + } else if(value<=0xffff) { + length=2; + } else if(value<=0xffffff) { + length=3; + } else { + length=4; + } + break; + case MBCS_OUTPUT_3_EUC: + value=MBCS_VALUE_2_FROM_STAGE_2(bytes, stage2Entry, c); + /* EUC 16-bit fixed-length representation */ + if(value<=0xff) { + length=1; + } else if((value&0x8000)==0) { + value|=0x8e8000; + length=3; + } else if((value&0x80)==0) { + value|=0x8f0080; + length=3; + } else { + length=2; + } + break; + case MBCS_OUTPUT_4_EUC: + p=MBCS_POINTER_3_FROM_STAGE_2(bytes, stage2Entry, c); + value=((uint32_t)*p<<16)|((uint32_t)p[1]<<8)|p[2]; + /* EUC 16-bit fixed-length representation applied to the first two bytes */ + if(value<=0xff) { + length=1; + } else if(value<=0xffff) { + length=2; + } else if((value&0x800000)==0) { + value|=0x8e800000; + length=4; + } else if((value&0x8000)==0) { + value|=0x8f008000; + length=4; + } else { + length=3; + } + break; + default: + /* must not occur */ + /* + * To avoid compiler warnings that value & length may be + * used without having been initialized, we set them here. + * In reality, this is unreachable code. + * Not having a default branch also causes warnings with + * some compilers. + */ + value=stage2Entry=0; /* stage2Entry=0 to reset roundtrip flags */ + length=0; + break; + } + + /* is this code point assigned, or do we use fallbacks? */ + if(!(MBCS_FROM_U_IS_ROUNDTRIP(stage2Entry, c)!=0 || + (UCNV_FROM_U_USE_FALLBACK(cnv, c) && value!=0)) + ) { + /* + * We allow a 0 byte output if the "assigned" bit is set for this entry. + * There is no way with this data structure for fallback output + * to be a zero byte. + */ + +unassigned: + /* try an extension mapping */ + pArgs->source=source; + c=_extFromU(cnv, cnv->sharedData, + c, &source, sourceLimit, + &target, target+targetCapacity, + &offsets, sourceIndex, + pArgs->flush, + pErrorCode); + nextSourceIndex+=(int32_t)(source-pArgs->source); + prevLength=cnv->fromUnicodeStatus; /* restore SISO state */ + + if(U_FAILURE(*pErrorCode)) { + /* not mappable or buffer overflow */ + break; + } else { + /* a mapping was written to the target, continue */ + + /* recalculate the targetCapacity after an extension mapping */ + targetCapacity=(int32_t)(pArgs->targetLimit-(char *)target); + + /* normal end of conversion: prepare for a new character */ + if(offsets!=NULL) { + prevSourceIndex=sourceIndex; + sourceIndex=nextSourceIndex; + } + continue; + } + } + } + + /* write the output character bytes from value and length */ + /* from the first if in the loop we know that targetCapacity>0 */ + if(length<=targetCapacity) { + if(offsets==NULL) { + switch(length) { + /* each branch falls through to the next one */ + case 4: + *target++=(uint8_t)(value>>24); + U_FALLTHROUGH; + case 3: + *target++=(uint8_t)(value>>16); + U_FALLTHROUGH; + case 2: + *target++=(uint8_t)(value>>8); + U_FALLTHROUGH; + case 1: + *target++=(uint8_t)value; + U_FALLTHROUGH; + default: + /* will never occur */ + break; + } + } else { + switch(length) { + /* each branch falls through to the next one */ + case 4: + *target++=(uint8_t)(value>>24); + *offsets++=sourceIndex; + U_FALLTHROUGH; + case 3: + *target++=(uint8_t)(value>>16); + *offsets++=sourceIndex; + U_FALLTHROUGH; + case 2: + *target++=(uint8_t)(value>>8); + *offsets++=sourceIndex; + U_FALLTHROUGH; + case 1: + *target++=(uint8_t)value; + *offsets++=sourceIndex; + U_FALLTHROUGH; + default: + /* will never occur */ + break; + } + } + targetCapacity-=length; + } else { + uint8_t *charErrorBuffer; + + /* + * We actually do this backwards here: + * In order to save an intermediate variable, we output + * first to the overflow buffer what does not fit into the + * regular target. + */ + /* we know that 1<=targetCapacity<length<=4 */ + length-=targetCapacity; + charErrorBuffer=(uint8_t *)cnv->charErrorBuffer; + switch(length) { + /* each branch falls through to the next one */ + case 3: + *charErrorBuffer++=(uint8_t)(value>>16); + U_FALLTHROUGH; + case 2: + *charErrorBuffer++=(uint8_t)(value>>8); + U_FALLTHROUGH; + case 1: + *charErrorBuffer=(uint8_t)value; + U_FALLTHROUGH; + default: + /* will never occur */ + break; + } + cnv->charErrorBufferLength=(int8_t)length; + + /* now output what fits into the regular target */ + value>>=8*length; /* length was reduced by targetCapacity */ + switch(targetCapacity) { + /* each branch falls through to the next one */ + case 3: + *target++=(uint8_t)(value>>16); + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + U_FALLTHROUGH; + case 2: + *target++=(uint8_t)(value>>8); + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + U_FALLTHROUGH; + case 1: + *target++=(uint8_t)value; + if(offsets!=NULL) { + *offsets++=sourceIndex; + } + U_FALLTHROUGH; + default: + /* will never occur */ + break; + } + + /* target overflow */ + targetCapacity=0; + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + c=0; + break; + } + + /* normal end of conversion: prepare for a new character */ + c=0; + if(offsets!=NULL) { + prevSourceIndex=sourceIndex; + sourceIndex=nextSourceIndex; + } + continue; + } else { + /* target is full */ + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + break; + } + } + + /* + * the end of the input stream and detection of truncated input + * are handled by the framework, but for EBCDIC_STATEFUL conversion + * we need to emit an SI at the very end + * + * conditions: + * successful + * EBCDIC_STATEFUL in DBCS mode + * end of input and no truncated input + */ + if( U_SUCCESS(*pErrorCode) && + outputType==MBCS_OUTPUT_2_SISO && prevLength==2 && + pArgs->flush && source>=sourceLimit && c==0 + ) { + /* EBCDIC_STATEFUL ending with DBCS: emit an SI to return the output stream to SBCS */ + if(targetCapacity>0) { + *target++=(uint8_t)siBytes[0]; + if (siLength == 2) { + if (targetCapacity<2) { + cnv->charErrorBuffer[0]=(uint8_t)siBytes[1]; + cnv->charErrorBufferLength=1; + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + } else { + *target++=(uint8_t)siBytes[1]; + } + } + if(offsets!=NULL) { + /* set the last source character's index (sourceIndex points at sourceLimit now) */ + *offsets++=prevSourceIndex; + } + } else { + /* target is full */ + cnv->charErrorBuffer[0]=(uint8_t)siBytes[0]; + if (siLength == 2) { + cnv->charErrorBuffer[1]=(uint8_t)siBytes[1]; + } + cnv->charErrorBufferLength=siLength; + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + } + prevLength=1; /* we switched into SBCS */ + } + + /* set the converter state back into UConverter */ + cnv->fromUChar32=c; + cnv->fromUnicodeStatus=prevLength; + + /* write back the updated pointers */ + pArgs->source=source; + pArgs->target=(char *)target; + pArgs->offsets=offsets; +} + +/* + * This is another simple conversion function for internal use by other + * conversion implementations. + * It does not use the converter state nor call callbacks. + * It does not handle the EBCDIC swaplfnl option (set in UConverter). + * It handles conversion extensions but not GB 18030. + * + * It converts one single Unicode code point into codepage bytes, encoded + * as one 32-bit value. The function returns the number of bytes in *pValue: + * 1..4 the number of bytes in *pValue + * 0 unassigned (*pValue undefined) + * -1 illegal (currently not used, *pValue undefined) + * + * *pValue will contain the resulting bytes with the last byte in bits 7..0, + * the second to last byte in bits 15..8, etc. + * Currently, the function assumes but does not check that 0<=c<=0x10ffff. + */ +U_CFUNC int32_t +ucnv_MBCSFromUChar32(UConverterSharedData *sharedData, + UChar32 c, uint32_t *pValue, + UBool useFallback) { + const int32_t *cx; + const uint16_t *table; +#if 0 +/* #if 0 because this is not currently used in ICU - reduce code, increase code coverage */ + const uint8_t *p; +#endif + uint32_t stage2Entry; + uint32_t value; + int32_t length; + + /* BMP-only codepages are stored without stage 1 entries for supplementary code points */ + if(c<=0xffff || (sharedData->mbcs.unicodeMask&UCNV_HAS_SUPPLEMENTARY)) { + table=sharedData->mbcs.fromUnicodeTable; + + /* convert the Unicode code point in c into codepage bytes (same as in _MBCSFromUnicodeWithOffsets) */ + if(sharedData->mbcs.outputType==MBCS_OUTPUT_1) { + value=MBCS_SINGLE_RESULT_FROM_U(table, (uint16_t *)sharedData->mbcs.fromUnicodeBytes, c); + /* is this code point assigned, or do we use fallbacks? */ + if(useFallback ? value>=0x800 : value>=0xc00) { + *pValue=value&0xff; + return 1; + } + } else /* outputType!=MBCS_OUTPUT_1 */ { + stage2Entry=MBCS_STAGE_2_FROM_U(table, c); + + /* get the bytes and the length for the output */ + switch(sharedData->mbcs.outputType) { + case MBCS_OUTPUT_2: + value=MBCS_VALUE_2_FROM_STAGE_2(sharedData->mbcs.fromUnicodeBytes, stage2Entry, c); + if(value<=0xff) { + length=1; + } else { + length=2; + } + break; +#if 0 +/* #if 0 because this is not currently used in ICU - reduce code, increase code coverage */ + case MBCS_OUTPUT_DBCS_ONLY: + /* table with single-byte results, but only DBCS mappings used */ + value=MBCS_VALUE_2_FROM_STAGE_2(sharedData->mbcs.fromUnicodeBytes, stage2Entry, c); + if(value<=0xff) { + /* no mapping or SBCS result, not taken for DBCS-only */ + value=stage2Entry=0; /* stage2Entry=0 to reset roundtrip flags */ + length=0; + } else { + length=2; + } + break; + case MBCS_OUTPUT_3: + p=MBCS_POINTER_3_FROM_STAGE_2(sharedData->mbcs.fromUnicodeBytes, stage2Entry, c); + value=((uint32_t)*p<<16)|((uint32_t)p[1]<<8)|p[2]; + if(value<=0xff) { + length=1; + } else if(value<=0xffff) { + length=2; + } else { + length=3; + } + break; + case MBCS_OUTPUT_4: + value=MBCS_VALUE_4_FROM_STAGE_2(sharedData->mbcs.fromUnicodeBytes, stage2Entry, c); + if(value<=0xff) { + length=1; + } else if(value<=0xffff) { + length=2; + } else if(value<=0xffffff) { + length=3; + } else { + length=4; + } + break; + case MBCS_OUTPUT_3_EUC: + value=MBCS_VALUE_2_FROM_STAGE_2(sharedData->mbcs.fromUnicodeBytes, stage2Entry, c); + /* EUC 16-bit fixed-length representation */ + if(value<=0xff) { + length=1; + } else if((value&0x8000)==0) { + value|=0x8e8000; + length=3; + } else if((value&0x80)==0) { + value|=0x8f0080; + length=3; + } else { + length=2; + } + break; + case MBCS_OUTPUT_4_EUC: + p=MBCS_POINTER_3_FROM_STAGE_2(sharedData->mbcs.fromUnicodeBytes, stage2Entry, c); + value=((uint32_t)*p<<16)|((uint32_t)p[1]<<8)|p[2]; + /* EUC 16-bit fixed-length representation applied to the first two bytes */ + if(value<=0xff) { + length=1; + } else if(value<=0xffff) { + length=2; + } else if((value&0x800000)==0) { + value|=0x8e800000; + length=4; + } else if((value&0x8000)==0) { + value|=0x8f008000; + length=4; + } else { + length=3; + } + break; +#endif + default: + /* must not occur */ + return -1; + } + + /* is this code point assigned, or do we use fallbacks? */ + if( MBCS_FROM_U_IS_ROUNDTRIP(stage2Entry, c) || + (FROM_U_USE_FALLBACK(useFallback, c) && value!=0) + ) { + /* + * We allow a 0 byte output if the "assigned" bit is set for this entry. + * There is no way with this data structure for fallback output + * to be a zero byte. + */ + /* assigned */ + *pValue=value; + return length; + } + } + } + + cx=sharedData->mbcs.extIndexes; + if(cx!=NULL) { + length=ucnv_extSimpleMatchFromU(cx, c, pValue, useFallback); + return length>=0 ? length : -length; /* return abs(length); */ + } + + /* unassigned */ + return 0; +} + + +#if 0 +/* + * This function has been moved to ucnv2022.c for inlining. + * This implementation is here only for documentation purposes + */ + +/** + * This version of ucnv_MBCSFromUChar32() is optimized for single-byte codepages. + * It does not handle the EBCDIC swaplfnl option (set in UConverter). + * It does not handle conversion extensions (_extFromU()). + * + * It returns the codepage byte for the code point, or -1 if it is unassigned. + */ +U_CFUNC int32_t +ucnv_MBCSSingleFromUChar32(UConverterSharedData *sharedData, + UChar32 c, + UBool useFallback) { + const uint16_t *table; + int32_t value; + + /* BMP-only codepages are stored without stage 1 entries for supplementary code points */ + if(c>=0x10000 && !(sharedData->mbcs.unicodeMask&UCNV_HAS_SUPPLEMENTARY)) { + return -1; + } + + /* convert the Unicode code point in c into codepage bytes (same as in _MBCSFromUnicodeWithOffsets) */ + table=sharedData->mbcs.fromUnicodeTable; + + /* get the byte for the output */ + value=MBCS_SINGLE_RESULT_FROM_U(table, (uint16_t *)sharedData->mbcs.fromUnicodeBytes, c); + /* is this code point assigned, or do we use fallbacks? */ + if(useFallback ? value>=0x800 : value>=0xc00) { + return value&0xff; + } else { + return -1; + } +} +#endif + +/* MBCS-from-UTF-8 conversion functions ------------------------------------- */ + +/* minimum code point values for n-byte UTF-8 sequences, n=0..4 */ +static const UChar32 +utf8_minLegal[5]={ 0, 0, 0x80, 0x800, 0x10000 }; + +/* offsets for n-byte UTF-8 sequences that were calculated with ((lead<<6)+trail)<<6+trail... */ +static const UChar32 +utf8_offsets[7]={ 0, 0, 0x3080, 0xE2080, 0x3C82080 }; + +static void +ucnv_SBCSFromUTF8(UConverterFromUnicodeArgs *pFromUArgs, + UConverterToUnicodeArgs *pToUArgs, + UErrorCode *pErrorCode) { + UConverter *utf8, *cnv; + const uint8_t *source, *sourceLimit; + uint8_t *target; + int32_t targetCapacity; + + const uint16_t *table, *sbcsIndex; + const uint16_t *results; + + int8_t oldToULength, toULength, toULimit; + + UChar32 c; + uint8_t b, t1, t2; + + uint32_t asciiRoundtrips; + uint16_t value, minValue; + UBool hasSupplementary; + + /* set up the local pointers */ + utf8=pToUArgs->converter; + cnv=pFromUArgs->converter; + source=(uint8_t *)pToUArgs->source; + sourceLimit=(uint8_t *)pToUArgs->sourceLimit; + target=(uint8_t *)pFromUArgs->target; + targetCapacity=(int32_t)(pFromUArgs->targetLimit-pFromUArgs->target); + + table=cnv->sharedData->mbcs.fromUnicodeTable; + sbcsIndex=cnv->sharedData->mbcs.sbcsIndex; + if((cnv->options&UCNV_OPTION_SWAP_LFNL)!=0) { + results=(uint16_t *)cnv->sharedData->mbcs.swapLFNLFromUnicodeBytes; + } else { + results=(uint16_t *)cnv->sharedData->mbcs.fromUnicodeBytes; + } + asciiRoundtrips=cnv->sharedData->mbcs.asciiRoundtrips; + + if(cnv->useFallback) { + /* use all roundtrip and fallback results */ + minValue=0x800; + } else { + /* use only roundtrips and fallbacks from private-use characters */ + minValue=0xc00; + } + hasSupplementary=(UBool)(cnv->sharedData->mbcs.unicodeMask&UCNV_HAS_SUPPLEMENTARY); + + /* get the converter state from the UTF-8 UConverter */ + c=(UChar32)utf8->toUnicodeStatus; + if(c!=0) { + toULength=oldToULength=utf8->toULength; + toULimit=(int8_t)utf8->mode; + } else { + toULength=oldToULength=toULimit=0; + } + + /* + * Make sure that the last byte sequence before sourceLimit is complete + * or runs into a lead byte. + * Do not go back into the bytes that will be read for finishing a partial + * sequence from the previous buffer. + * In the conversion loop compare source with sourceLimit only once + * per multi-byte character. + */ + { + int32_t i, length; + + length=(int32_t)(sourceLimit-source) - (toULimit-oldToULength); + for(i=0; i<3 && i<length;) { + b=*(sourceLimit-i-1); + if(U8_IS_TRAIL(b)) { + ++i; + } else { + if(i<U8_COUNT_TRAIL_BYTES(b)) { + /* exit the conversion loop before the lead byte if there are not enough trail bytes for it */ + sourceLimit-=i+1; + } + break; + } + } + } + + if(c!=0 && targetCapacity>0) { + utf8->toUnicodeStatus=0; + utf8->toULength=0; + goto moreBytes; + /* + * Note: We could avoid the goto by duplicating some of the moreBytes + * code, but only up to the point of collecting a complete UTF-8 + * sequence; then recurse for the toUBytes[toULength] + * and then continue with normal conversion. + * + * If so, move this code to just after initializing the minimum + * set of local variables for reading the UTF-8 input + * (utf8, source, target, limits but not cnv, table, minValue, etc.). + * + * Potential advantages: + * - avoid the goto + * - oldToULength could become a local variable in just those code blocks + * that deal with buffer boundaries + * - possibly faster if the goto prevents some compiler optimizations + * (this would need measuring to confirm) + * Disadvantage: + * - code duplication + */ + } + + /* conversion loop */ + while(source<sourceLimit) { + if(targetCapacity>0) { + b=*source++; + if((int8_t)b>=0) { + /* convert ASCII */ + if(IS_ASCII_ROUNDTRIP(b, asciiRoundtrips)) { + *target++=(uint8_t)b; + --targetCapacity; + continue; + } else { + c=b; + value=SBCS_RESULT_FROM_UTF8(sbcsIndex, results, 0, c); + } + } else { + if(b<0xe0) { + if( /* handle U+0080..U+07FF inline */ + b>=0xc2 && + (t1=(uint8_t)(*source-0x80)) <= 0x3f + ) { + c=b&0x1f; + ++source; + value=SBCS_RESULT_FROM_UTF8(sbcsIndex, results, c, t1); + if(value>=minValue) { + *target++=(uint8_t)value; + --targetCapacity; + continue; + } else { + c=(c<<6)|t1; + } + } else { + c=-1; + } + } else if(b==0xe0) { + if( /* handle U+0800..U+0FFF inline */ + (t1=(uint8_t)(source[0]-0x80)) <= 0x3f && t1 >= 0x20 && + (t2=(uint8_t)(source[1]-0x80)) <= 0x3f + ) { + c=t1; + source+=2; + value=SBCS_RESULT_FROM_UTF8(sbcsIndex, results, c, t2); + if(value>=minValue) { + *target++=(uint8_t)value; + --targetCapacity; + continue; + } else { + c=(c<<6)|t2; + } + } else { + c=-1; + } + } else { + c=-1; + } + + if(c<0) { + /* handle "complicated" and error cases, and continuing partial characters */ + oldToULength=0; + toULength=1; + toULimit=U8_COUNT_TRAIL_BYTES(b)+1; + c=b; +moreBytes: + while(toULength<toULimit) { + /* + * The sourceLimit may have been adjusted before the conversion loop + * to stop before a truncated sequence. + * Here we need to use the real limit in case we have two truncated + * sequences at the end. + * See ticket #7492. + */ + if(source<(uint8_t *)pToUArgs->sourceLimit) { + b=*source; + if(U8_IS_TRAIL(b)) { + ++source; + ++toULength; + c=(c<<6)+b; + } else { + break; /* sequence too short, stop with toULength<toULimit */ + } + } else { + /* store the partial UTF-8 character, compatible with the regular UTF-8 converter */ + source-=(toULength-oldToULength); + while(oldToULength<toULength) { + utf8->toUBytes[oldToULength++]=*source++; + } + utf8->toUnicodeStatus=c; + utf8->toULength=toULength; + utf8->mode=toULimit; + pToUArgs->source=(char *)source; + pFromUArgs->target=(char *)target; + return; + } + } + + if( toULength==toULimit && /* consumed all trail bytes */ + (toULength==3 || toULength==2) && /* BMP */ + (c-=utf8_offsets[toULength])>=utf8_minLegal[toULength] && + (c<=0xd7ff || 0xe000<=c) /* not a surrogate */ + ) { + value=MBCS_SINGLE_RESULT_FROM_U(table, results, c); + } else if( + toULength==toULimit && toULength==4 && + (0x10000<=(c-=utf8_offsets[4]) && c<=0x10ffff) + ) { + /* supplementary code point */ + if(!hasSupplementary) { + /* BMP-only codepages are stored without stage 1 entries for supplementary code points */ + value=0; + } else { + value=MBCS_SINGLE_RESULT_FROM_U(table, results, c); + } + } else { + /* error handling: illegal UTF-8 byte sequence */ + source-=(toULength-oldToULength); + while(oldToULength<toULength) { + utf8->toUBytes[oldToULength++]=*source++; + } + utf8->toULength=toULength; + pToUArgs->source=(char *)source; + pFromUArgs->target=(char *)target; + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + return; + } + } + } + + if(value>=minValue) { + /* output the mapping for c */ + *target++=(uint8_t)value; + --targetCapacity; + } else { + /* value<minValue means c is unassigned (unmappable) */ + /* + * Try an extension mapping. + * Pass in no source because we don't have UTF-16 input. + * If we have a partial match on c, we will return and revert + * to UTF-8->UTF-16->charset conversion. + */ + static const UChar nul=0; + const UChar *noSource=&nul; + c=_extFromU(cnv, cnv->sharedData, + c, &noSource, noSource, + &target, target+targetCapacity, + NULL, -1, + pFromUArgs->flush, + pErrorCode); + + if(U_FAILURE(*pErrorCode)) { + /* not mappable or buffer overflow */ + cnv->fromUChar32=c; + break; + } else if(cnv->preFromUFirstCP>=0) { + /* + * Partial match, return and revert to pivoting. + * In normal from-UTF-16 conversion, we would just continue + * but then exit the loop because the extension match would + * have consumed the source. + */ + *pErrorCode=U_USING_DEFAULT_WARNING; + break; + } else { + /* a mapping was written to the target, continue */ + + /* recalculate the targetCapacity after an extension mapping */ + targetCapacity=(int32_t)(pFromUArgs->targetLimit-(char *)target); + } + } + } else { + /* target is full */ + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + break; + } + } + + /* + * The sourceLimit may have been adjusted before the conversion loop + * to stop before a truncated sequence. + * If so, then collect the truncated sequence now. + */ + if(U_SUCCESS(*pErrorCode) && + cnv->preFromUFirstCP<0 && + source<(sourceLimit=(uint8_t *)pToUArgs->sourceLimit)) { + c=utf8->toUBytes[0]=b=*source++; + toULength=1; + toULimit=U8_COUNT_TRAIL_BYTES(b)+1; + while(source<sourceLimit) { + utf8->toUBytes[toULength++]=b=*source++; + c=(c<<6)+b; + } + utf8->toUnicodeStatus=c; + utf8->toULength=toULength; + utf8->mode=toULimit; + } + + /* write back the updated pointers */ + pToUArgs->source=(char *)source; + pFromUArgs->target=(char *)target; +} + +static void +ucnv_DBCSFromUTF8(UConverterFromUnicodeArgs *pFromUArgs, + UConverterToUnicodeArgs *pToUArgs, + UErrorCode *pErrorCode) { + UConverter *utf8, *cnv; + const uint8_t *source, *sourceLimit; + uint8_t *target; + int32_t targetCapacity; + + const uint16_t *table, *mbcsIndex; + const uint16_t *results; + + int8_t oldToULength, toULength, toULimit; + + UChar32 c; + uint8_t b, t1, t2; + + uint32_t stage2Entry; + uint32_t asciiRoundtrips; + uint16_t value; + UBool hasSupplementary; + + /* set up the local pointers */ + utf8=pToUArgs->converter; + cnv=pFromUArgs->converter; + source=(uint8_t *)pToUArgs->source; + sourceLimit=(uint8_t *)pToUArgs->sourceLimit; + target=(uint8_t *)pFromUArgs->target; + targetCapacity=(int32_t)(pFromUArgs->targetLimit-pFromUArgs->target); + + table=cnv->sharedData->mbcs.fromUnicodeTable; + mbcsIndex=cnv->sharedData->mbcs.mbcsIndex; + if((cnv->options&UCNV_OPTION_SWAP_LFNL)!=0) { + results=(uint16_t *)cnv->sharedData->mbcs.swapLFNLFromUnicodeBytes; + } else { + results=(uint16_t *)cnv->sharedData->mbcs.fromUnicodeBytes; + } + asciiRoundtrips=cnv->sharedData->mbcs.asciiRoundtrips; + + hasSupplementary=(UBool)(cnv->sharedData->mbcs.unicodeMask&UCNV_HAS_SUPPLEMENTARY); + + /* get the converter state from the UTF-8 UConverter */ + c=(UChar32)utf8->toUnicodeStatus; + if(c!=0) { + toULength=oldToULength=utf8->toULength; + toULimit=(int8_t)utf8->mode; + } else { + toULength=oldToULength=toULimit=0; + } + + /* + * Make sure that the last byte sequence before sourceLimit is complete + * or runs into a lead byte. + * Do not go back into the bytes that will be read for finishing a partial + * sequence from the previous buffer. + * In the conversion loop compare source with sourceLimit only once + * per multi-byte character. + */ + { + int32_t i, length; + + length=(int32_t)(sourceLimit-source) - (toULimit-oldToULength); + for(i=0; i<3 && i<length;) { + b=*(sourceLimit-i-1); + if(U8_IS_TRAIL(b)) { + ++i; + } else { + if(i<U8_COUNT_TRAIL_BYTES(b)) { + /* exit the conversion loop before the lead byte if there are not enough trail bytes for it */ + sourceLimit-=i+1; + } + break; + } + } + } + + if(c!=0 && targetCapacity>0) { + utf8->toUnicodeStatus=0; + utf8->toULength=0; + goto moreBytes; + /* See note in ucnv_SBCSFromUTF8() about this goto. */ + } + + /* conversion loop */ + while(source<sourceLimit) { + if(targetCapacity>0) { + b=*source++; + if((int8_t)b>=0) { + /* convert ASCII */ + if(IS_ASCII_ROUNDTRIP(b, asciiRoundtrips)) { + *target++=b; + --targetCapacity; + continue; + } else { + value=DBCS_RESULT_FROM_UTF8(mbcsIndex, results, 0, b); + if(value==0) { + c=b; + goto unassigned; + } + } + } else { + if(b>0xe0) { + if( /* handle U+1000..U+D7FF inline */ + (((t1=(uint8_t)(source[0]-0x80), b<0xed) && (t1 <= 0x3f)) || + (b==0xed && (t1 <= 0x1f))) && + (t2=(uint8_t)(source[1]-0x80)) <= 0x3f + ) { + c=((b&0xf)<<6)|t1; + source+=2; + value=DBCS_RESULT_FROM_UTF8(mbcsIndex, results, c, t2); + if(value==0) { + c=(c<<6)|t2; + goto unassigned; + } + } else { + c=-1; + } + } else if(b<0xe0) { + if( /* handle U+0080..U+07FF inline */ + b>=0xc2 && + (t1=(uint8_t)(*source-0x80)) <= 0x3f + ) { + c=b&0x1f; + ++source; + value=DBCS_RESULT_FROM_UTF8(mbcsIndex, results, c, t1); + if(value==0) { + c=(c<<6)|t1; + goto unassigned; + } + } else { + c=-1; + } + } else { + c=-1; + } + + if(c<0) { + /* handle "complicated" and error cases, and continuing partial characters */ + oldToULength=0; + toULength=1; + toULimit=U8_COUNT_TRAIL_BYTES(b)+1; + c=b; +moreBytes: + while(toULength<toULimit) { + /* + * The sourceLimit may have been adjusted before the conversion loop + * to stop before a truncated sequence. + * Here we need to use the real limit in case we have two truncated + * sequences at the end. + * See ticket #7492. + */ + if(source<(uint8_t *)pToUArgs->sourceLimit) { + b=*source; + if(U8_IS_TRAIL(b)) { + ++source; + ++toULength; + c=(c<<6)+b; + } else { + break; /* sequence too short, stop with toULength<toULimit */ + } + } else { + /* store the partial UTF-8 character, compatible with the regular UTF-8 converter */ + source-=(toULength-oldToULength); + while(oldToULength<toULength) { + utf8->toUBytes[oldToULength++]=*source++; + } + utf8->toUnicodeStatus=c; + utf8->toULength=toULength; + utf8->mode=toULimit; + pToUArgs->source=(char *)source; + pFromUArgs->target=(char *)target; + return; + } + } + + if( toULength==toULimit && /* consumed all trail bytes */ + (toULength==3 || toULength==2) && /* BMP */ + (c-=utf8_offsets[toULength])>=utf8_minLegal[toULength] && + (c<=0xd7ff || 0xe000<=c) /* not a surrogate */ + ) { + stage2Entry=MBCS_STAGE_2_FROM_U(table, c); + } else if( + toULength==toULimit && toULength==4 && + (0x10000<=(c-=utf8_offsets[4]) && c<=0x10ffff) + ) { + /* supplementary code point */ + if(!hasSupplementary) { + /* BMP-only codepages are stored without stage 1 entries for supplementary code points */ + stage2Entry=0; + } else { + stage2Entry=MBCS_STAGE_2_FROM_U(table, c); + } + } else { + /* error handling: illegal UTF-8 byte sequence */ + source-=(toULength-oldToULength); + while(oldToULength<toULength) { + utf8->toUBytes[oldToULength++]=*source++; + } + utf8->toULength=toULength; + pToUArgs->source=(char *)source; + pFromUArgs->target=(char *)target; + *pErrorCode=U_ILLEGAL_CHAR_FOUND; + return; + } + + /* get the bytes and the length for the output */ + /* MBCS_OUTPUT_2 */ + value=MBCS_VALUE_2_FROM_STAGE_2(results, stage2Entry, c); + + /* is this code point assigned, or do we use fallbacks? */ + if(!(MBCS_FROM_U_IS_ROUNDTRIP(stage2Entry, c) || + (UCNV_FROM_U_USE_FALLBACK(cnv, c) && value!=0)) + ) { + goto unassigned; + } + } + } + + /* write the output character bytes from value and length */ + /* from the first if in the loop we know that targetCapacity>0 */ + if(value<=0xff) { + /* this is easy because we know that there is enough space */ + *target++=(uint8_t)value; + --targetCapacity; + } else /* length==2 */ { + *target++=(uint8_t)(value>>8); + if(2<=targetCapacity) { + *target++=(uint8_t)value; + targetCapacity-=2; + } else { + cnv->charErrorBuffer[0]=(char)value; + cnv->charErrorBufferLength=1; + + /* target overflow */ + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + break; + } + } + continue; + +unassigned: + { + /* + * Try an extension mapping. + * Pass in no source because we don't have UTF-16 input. + * If we have a partial match on c, we will return and revert + * to UTF-8->UTF-16->charset conversion. + */ + static const UChar nul=0; + const UChar *noSource=&nul; + c=_extFromU(cnv, cnv->sharedData, + c, &noSource, noSource, + &target, target+targetCapacity, + NULL, -1, + pFromUArgs->flush, + pErrorCode); + + if(U_FAILURE(*pErrorCode)) { + /* not mappable or buffer overflow */ + cnv->fromUChar32=c; + break; + } else if(cnv->preFromUFirstCP>=0) { + /* + * Partial match, return and revert to pivoting. + * In normal from-UTF-16 conversion, we would just continue + * but then exit the loop because the extension match would + * have consumed the source. + */ + *pErrorCode=U_USING_DEFAULT_WARNING; + break; + } else { + /* a mapping was written to the target, continue */ + + /* recalculate the targetCapacity after an extension mapping */ + targetCapacity=(int32_t)(pFromUArgs->targetLimit-(char *)target); + continue; + } + } + } else { + /* target is full */ + *pErrorCode=U_BUFFER_OVERFLOW_ERROR; + break; + } + } + + /* + * The sourceLimit may have been adjusted before the conversion loop + * to stop before a truncated sequence. + * If so, then collect the truncated sequence now. + */ + if(U_SUCCESS(*pErrorCode) && + cnv->preFromUFirstCP<0 && + source<(sourceLimit=(uint8_t *)pToUArgs->sourceLimit)) { + c=utf8->toUBytes[0]=b=*source++; + toULength=1; + toULimit=U8_COUNT_TRAIL_BYTES(b)+1; + while(source<sourceLimit) { + utf8->toUBytes[toULength++]=b=*source++; + c=(c<<6)+b; + } + utf8->toUnicodeStatus=c; + utf8->toULength=toULength; + utf8->mode=toULimit; + } + + /* write back the updated pointers */ + pToUArgs->source=(char *)source; + pFromUArgs->target=(char *)target; +} + +/* miscellaneous ------------------------------------------------------------ */ + +static void +ucnv_MBCSGetStarters(const UConverter* cnv, + UBool starters[256], + UErrorCode *) { + const int32_t *state0; + int i; + + state0=cnv->sharedData->mbcs.stateTable[cnv->sharedData->mbcs.dbcsOnlyState]; + for(i=0; i<256; ++i) { + /* all bytes that cause a state transition from state 0 are lead bytes */ + starters[i]= (UBool)MBCS_ENTRY_IS_TRANSITION(state0[i]); + } +} + +/* + * This is an internal function that allows other converter implementations + * to check whether a byte is a lead byte. + */ +U_CFUNC UBool +ucnv_MBCSIsLeadByte(UConverterSharedData *sharedData, char byte) { + return (UBool)MBCS_ENTRY_IS_TRANSITION(sharedData->mbcs.stateTable[0][(uint8_t)byte]); +} + +static void +ucnv_MBCSWriteSub(UConverterFromUnicodeArgs *pArgs, + int32_t offsetIndex, + UErrorCode *pErrorCode) { + UConverter *cnv=pArgs->converter; + char *p, *subchar; + char buffer[4]; + int32_t length; + + /* first, select between subChar and subChar1 */ + if( cnv->subChar1!=0 && + (cnv->sharedData->mbcs.extIndexes!=NULL ? + cnv->useSubChar1 : + (cnv->invalidUCharBuffer[0]<=0xff)) + ) { + /* select subChar1 if it is set (not 0) and the unmappable Unicode code point is up to U+00ff (IBM MBCS behavior) */ + subchar=(char *)&cnv->subChar1; + length=1; + } else { + /* select subChar in all other cases */ + subchar=(char *)cnv->subChars; + length=cnv->subCharLen; + } + + /* reset the selector for the next code point */ + cnv->useSubChar1=FALSE; + + if (cnv->sharedData->mbcs.outputType == MBCS_OUTPUT_2_SISO) { + p=buffer; + + /* fromUnicodeStatus contains prevLength */ + switch(length) { + case 1: + if(cnv->fromUnicodeStatus==2) { + /* DBCS mode and SBCS sub char: change to SBCS */ + cnv->fromUnicodeStatus=1; + *p++=UCNV_SI; + } + *p++=subchar[0]; + break; + case 2: + if(cnv->fromUnicodeStatus<=1) { + /* SBCS mode and DBCS sub char: change to DBCS */ + cnv->fromUnicodeStatus=2; + *p++=UCNV_SO; + } + *p++=subchar[0]; + *p++=subchar[1]; + break; + default: + *pErrorCode=U_ILLEGAL_ARGUMENT_ERROR; + return; + } + subchar=buffer; + length=(int32_t)(p-buffer); + } + + ucnv_cbFromUWriteBytes(pArgs, subchar, length, offsetIndex, pErrorCode); +} + +U_CFUNC UConverterType +ucnv_MBCSGetType(const UConverter* converter) { + /* SBCS, DBCS, and EBCDIC_STATEFUL are replaced by MBCS, but here we cheat a little */ + if(converter->sharedData->mbcs.countStates==1) { + return (UConverterType)UCNV_SBCS; + } else if((converter->sharedData->mbcs.outputType&0xff)==MBCS_OUTPUT_2_SISO) { + return (UConverterType)UCNV_EBCDIC_STATEFUL; + } else if(converter->sharedData->staticData->minBytesPerChar==2 && converter->sharedData->staticData->maxBytesPerChar==2) { + return (UConverterType)UCNV_DBCS; + } + return (UConverterType)UCNV_MBCS; +} + +#endif /* #if !UCONFIG_NO_LEGACY_CONVERSION */ |