diff options
Diffstat (limited to 'deps/node/deps/npm/node_modules/extsprintf/Makefile.targ')
| -rw-r--r-- | deps/node/deps/npm/node_modules/extsprintf/Makefile.targ | 285 |
1 files changed, 0 insertions, 285 deletions
diff --git a/deps/node/deps/npm/node_modules/extsprintf/Makefile.targ b/deps/node/deps/npm/node_modules/extsprintf/Makefile.targ deleted file mode 100644 index 2a64fe7e..00000000 --- a/deps/node/deps/npm/node_modules/extsprintf/Makefile.targ +++ /dev/null @@ -1,285 +0,0 @@ -# -*- mode: makefile -*- -# -# Copyright (c) 2012, Joyent, Inc. All rights reserved. -# -# Makefile.targ: common targets. -# -# NOTE: This makefile comes from the "eng" repo. It's designed to be dropped -# into other repos as-is without requiring any modifications. If you find -# yourself changing this file, you should instead update the original copy in -# eng.git and then update your repo to use the new version. -# -# This Makefile defines several useful targets and rules. You can use it by -# including it from a Makefile that specifies some of the variables below. -# -# Targets defined in this Makefile: -# -# check Checks JavaScript files for lint and style -# Checks bash scripts for syntax -# Checks SMF manifests for validity against the SMF DTD -# -# clean Removes built files -# -# docs Builds restdown documentation in docs/ -# -# prepush Depends on "check" and "test" -# -# test Does nothing (you should override this) -# -# xref Generates cscope (source cross-reference index) -# -# For details on what these targets are supposed to do, see the Joyent -# Engineering Guide. -# -# To make use of these targets, you'll need to set some of these variables. Any -# variables left unset will simply not be used. -# -# BASH_FILES Bash scripts to check for syntax -# (paths relative to top-level Makefile) -# -# CLEAN_FILES Files to remove as part of the "clean" target. Note -# that files generated by targets in this Makefile are -# automatically included in CLEAN_FILES. These include -# restdown-generated HTML and JSON files. -# -# DOC_FILES Restdown (documentation source) files. These are -# assumed to be contained in "docs/", and must NOT -# contain the "docs/" prefix. -# -# JSL_CONF_NODE Specify JavaScriptLint configuration files -# JSL_CONF_WEB (paths relative to top-level Makefile) -# -# Node.js and Web configuration files are separate -# because you'll usually want different global variable -# configurations. If no file is specified, none is given -# to jsl, which causes it to use a default configuration, -# which probably isn't what you want. -# -# JSL_FILES_NODE JavaScript files to check with Node config file. -# JSL_FILES_WEB JavaScript files to check with Web config file. -# -# You can also override these variables: -# -# BASH Path to bash (default: bash) -# -# CSCOPE_DIRS Directories to search for source files for the cscope -# index. (default: ".") -# -# JSL Path to JavaScriptLint (default: "jsl") -# -# JSL_FLAGS_NODE Additional flags to pass through to JSL -# JSL_FLAGS_WEB -# JSL_FLAGS -# -# JSSTYLE Path to jsstyle (default: jsstyle) -# -# JSSTYLE_FLAGS Additional flags to pass through to jsstyle -# - -# -# Defaults for the various tools we use. -# -BASH ?= bash -BASHSTYLE ?= tools/bashstyle -CP ?= cp -CSCOPE ?= cscope -CSCOPE_DIRS ?= . -JSL ?= jsl -JSSTYLE ?= jsstyle -MKDIR ?= mkdir -p -MV ?= mv -RESTDOWN_FLAGS ?= -RMTREE ?= rm -rf -JSL_FLAGS ?= --nologo --nosummary - -ifeq ($(shell uname -s),SunOS) - TAR ?= gtar -else - TAR ?= tar -endif - - -# -# Defaults for other fixed values. -# -BUILD = build -DISTCLEAN_FILES += $(BUILD) -DOC_BUILD = $(BUILD)/docs/public - -# -# Configure JSL_FLAGS_{NODE,WEB} based on JSL_CONF_{NODE,WEB}. -# -ifneq ($(origin JSL_CONF_NODE), undefined) - JSL_FLAGS_NODE += --conf=$(JSL_CONF_NODE) -endif - -ifneq ($(origin JSL_CONF_WEB), undefined) - JSL_FLAGS_WEB += --conf=$(JSL_CONF_WEB) -endif - -# -# Targets. For descriptions on what these are supposed to do, see the -# Joyent Engineering Guide. -# - -# -# Instruct make to keep around temporary files. We have rules below that -# automatically update git submodules as needed, but they employ a deps/*/.git -# temporary file. Without this directive, make tries to remove these .git -# directories after the build has completed. -# -.SECONDARY: $($(wildcard deps/*):%=%/.git) - -# -# This rule enables other rules that use files from a git submodule to have -# those files depend on deps/module/.git and have "make" automatically check -# out the submodule as needed. -# -deps/%/.git: - git submodule update --init deps/$* - -# -# These recipes make heavy use of dynamically-created phony targets. The parent -# Makefile defines a list of input files like BASH_FILES. We then say that each -# of these files depends on a fake target called filename.bashchk, and then we -# define a pattern rule for those targets that runs bash in check-syntax-only -# mode. This mechanism has the nice properties that if you specify zero files, -# the rule becomes a noop (unlike a single rule to check all bash files, which -# would invoke bash with zero files), and you can check individual files from -# the command line with "make filename.bashchk". -# -.PHONY: check-bash -check-bash: $(BASH_FILES:%=%.bashchk) $(BASH_FILES:%=%.bashstyle) - -%.bashchk: % - $(BASH) -n $^ - -%.bashstyle: % - $(BASHSTYLE) $^ - -.PHONY: check-jsl check-jsl-node check-jsl-web -check-jsl: check-jsl-node check-jsl-web - -check-jsl-node: $(JSL_FILES_NODE:%=%.jslnodechk) - -check-jsl-web: $(JSL_FILES_WEB:%=%.jslwebchk) - -%.jslnodechk: % $(JSL_EXEC) - $(JSL) $(JSL_FLAGS) $(JSL_FLAGS_NODE) $< - -%.jslwebchk: % $(JSL_EXEC) - $(JSL) $(JSL_FLAGS) $(JSL_FLAGS_WEB) $< - -.PHONY: check-jsstyle -check-jsstyle: $(JSSTYLE_FILES:%=%.jsstylechk) - -%.jsstylechk: % $(JSSTYLE_EXEC) - $(JSSTYLE) $(JSSTYLE_FLAGS) $< - -.PHONY: check -check: check-jsl check-jsstyle check-bash - @echo check ok - -.PHONY: clean -clean:: - -$(RMTREE) $(CLEAN_FILES) - -.PHONY: distclean -distclean:: clean - -$(RMTREE) $(DISTCLEAN_FILES) - -CSCOPE_FILES = cscope.in.out cscope.out cscope.po.out -CLEAN_FILES += $(CSCOPE_FILES) - -.PHONY: xref -xref: cscope.files - $(CSCOPE) -bqR - -.PHONY: cscope.files -cscope.files: - find $(CSCOPE_DIRS) -name '*.c' -o -name '*.h' -o -name '*.cc' \ - -o -name '*.js' -o -name '*.s' -o -name '*.cpp' > $@ - -# -# The "docs" target is complicated because we do several things here: -# -# (1) Use restdown to build HTML and JSON files from each of DOC_FILES. -# -# (2) Copy these files into $(DOC_BUILD) (build/docs/public), which -# functions as a complete copy of the documentation that could be -# mirrored or served over HTTP. -# -# (3) Then copy any directories and media from docs/media into -# $(DOC_BUILD)/media. This allows projects to include their own media, -# including files that will override same-named files provided by -# restdown. -# -# Step (3) is the surprisingly complex part: in order to do this, we need to -# identify the subdirectories in docs/media, recreate them in -# $(DOC_BUILD)/media, then do the same with the files. -# -DOC_MEDIA_DIRS := $(shell find docs/media -type d 2>/dev/null | grep -v "^docs/media$$") -DOC_MEDIA_DIRS := $(DOC_MEDIA_DIRS:docs/media/%=%) -DOC_MEDIA_DIRS_BUILD := $(DOC_MEDIA_DIRS:%=$(DOC_BUILD)/media/%) - -DOC_MEDIA_FILES := $(shell find docs/media -type f 2>/dev/null) -DOC_MEDIA_FILES := $(DOC_MEDIA_FILES:docs/media/%=%) -DOC_MEDIA_FILES_BUILD := $(DOC_MEDIA_FILES:%=$(DOC_BUILD)/media/%) - -# -# Like the other targets, "docs" just depends on the final files we want to -# create in $(DOC_BUILD), leveraging other targets and recipes to define how -# to get there. -# -.PHONY: docs -docs: \ - $(DOC_FILES:%.restdown=$(DOC_BUILD)/%.html) \ - $(DOC_FILES:%.restdown=$(DOC_BUILD)/%.json) \ - $(DOC_MEDIA_FILES_BUILD) - -# -# We keep the intermediate files so that the next build can see whether the -# files in DOC_BUILD are up to date. -# -.PRECIOUS: \ - $(DOC_FILES:%.restdown=docs/%.html) \ - $(DOC_FILES:%.restdown=docs/%json) - -# -# We do clean those intermediate files, as well as all of DOC_BUILD. -# -CLEAN_FILES += \ - $(DOC_BUILD) \ - $(DOC_FILES:%.restdown=docs/%.html) \ - $(DOC_FILES:%.restdown=docs/%.json) - -# -# Before installing the files, we must make sure the directories exist. The | -# syntax tells make that the dependency need only exist, not be up to date. -# Otherwise, it might try to rebuild spuriously because the directory itself -# appears out of date. -# -$(DOC_MEDIA_FILES_BUILD): | $(DOC_MEDIA_DIRS_BUILD) - -$(DOC_BUILD)/%: docs/% | $(DOC_BUILD) - $(CP) $< $@ - -docs/%.json docs/%.html: docs/%.restdown | $(DOC_BUILD) $(RESTDOWN_EXEC) - $(RESTDOWN) $(RESTDOWN_FLAGS) -m $(DOC_BUILD) $< - -$(DOC_BUILD): - $(MKDIR) $@ - -$(DOC_MEDIA_DIRS_BUILD): - $(MKDIR) $@ - -# -# The default "test" target does nothing. This should usually be overridden by -# the parent Makefile. It's included here so we can define "prepush" without -# requiring the repo to define "test". -# -.PHONY: test -test: - -.PHONY: prepush -prepush: check test |