| Age | Commit message (Collapse) | Author |
|---|
|
... and adjust those that cause errors
Closes #4116
|
|
follow-up to 7fb66c403
|
|
Triggered by PR #4111
Closes #4113
|
|
The testcase ensures that redirects to CURLPROTO_GOPHER won't be
allowed, by default, in the future. Also, curl is being used
for convenience while keeping the testcases DRY.
The expected error code is CURLE_UNSUPPORTED_PROTOCOL when the client is
redirected to CURLPROTO_GOPHER
Signed-off-by: Linos Giannopoulos <lgian@skroutz.gr>
|
|
With CURLOPT_TIMECONDITION set, a header is automatically added (e.g.
If-Modified-Since). Allow this to be replaced or suppressed with
CURLOPT_HTTPHEADER.
Fixes #4103
Closes #4109
|
|
The header now has the slist-using options marked as SLISTPOINT so this
makes sure test 1521 understands that.
Follow-up to ae99b4de1c443ae989
Closes #4074
|
|
These tests give differences for me on linux when using a hostip
pointing to the external ip address for the local machine.
Closes #4070
|
|
Closes #4065
|
|
follow-up from 29177f422a5
Closes #4059
|
|
smbserver.py/dictserver.py were explicitly using localhost/127.0.0.1 for
binding the server which when we were running the tests with a separate
HOSTIP and CLIENTIP had failures verifying the server from the device we
were testing.
This changes them to take the address from runtests.py and default to
localhost/127.0.0.1 if none is given.
Closes #4048
|
|
|
|
Make '-k' a no-op. The singletest function now clears the log directory
BEFORE each individual test and not after, which makes it possible to
always keep the logfiles around after a test has been run. No need to
specify -k anymore. Keeping the option parsing around to work with users
of old habits.
Some tests also didn't work properly when -k was used (since the old
logs would be kep when a new test starts) which this change also fixes.
Closes #4035
|
|
... so that runtests can skip individual test cases that test features
that are explicitly disabled in this build. This new logic is intended
for disabled features that aren't otherwise easily visible through the
curl_version_info() or other API calls.
tests/server/disabled is a newly built executable that will output a
list of disabled features. Outputs nothing for a default build.
Closes #3950
|
|
This cures the flaky test results
Closes #4034
|
|
... after each successful test.
Closes #4027
|
|
... to make it handle torture tests properly.
Reported-by: Marcel Raad
Fixes #4021
Closes #4022
|
|
between configure.ac and source code. They should be possible to switch
on/off in configure AND be used in source code.
|
|
Remove support for, references to and use of "cyaSSL" from the source
and docs. wolfSSL is the current name and there's no point in keeping
references to ancient history.
Assisted-by: Daniel Gustafsson
Closes #3903
|
|
Reduce variable scopes and remove redundant variable stores.
Closes https://github.com/curl/curl/pull/3975
|
|
Unused since commit 2f44e94.
Closes https://github.com/curl/curl/pull/3975
|
|
Missed in 04fd6755.
Closes #3978
|
|
Verifies that a bodyless response don't parse this content-related
header.
|
|
Responses with status codes 1xx, 204 or 304 don't have a response body. For
these, don't parse these headers:
- Content-Encoding
- Content-Length
- Content-Range
- Last-Modified
- Transfer-Encoding
This change ensures that HTTP/2 upgrades work even if a
"Content-Length: 0" or a "Transfer-Encoding: chunked" header is present.
Co-authored-by: Daniel Stenberg
Closes #3702
Fixes #3968
Closes #3977
|
|
Add the proxy and haproxy keywords in order to be able to exclude or
run these specific tests.
Closes https://github.com/curl/curl/pull/3949
|
|
Closes #3948
|
|
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72c a9499ff 8c1cc36 c2a8d52 0edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae37e2020722e6f61229d8ec64095b0a.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a1356a722ff9f4aeb983cd4eaf80ef221.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0c7163c6dcc91fd38edfea1f509ae75.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136d89987af885e2d7dff0a066a3e5817.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2fec5d4eb5a043936e4f7ce08015c177.
|
|
- Change data and protocol sections to CRLF line endings.
Prior to this change the tests would fail or hang, which is because
certain sections such as protocol require CRLF line endings.
Follow-up to a9499ff from today which added the tests.
Ref: https://github.com/curl/curl/pull/3790
|
|
|
|
Testing against OpenSSH for Windows requires v7.7.0.0 or newer
due to the use of AllowUsers and DenyUsers. For more info see:
https://github.com/PowerShell/Win32-OpenSSH/wiki/sshd_config
|
|
Reported-by: Olen Andoni
Fixes #3906
Closes #3907
|
|
Ref: #3905
|
|
|
|
Closes #3844
|
|
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876
Closes #3883
|
|
As we treat a given proxy as a URL we should use the unified URL parser
to extract the parts out of it.
Closes #3878
|
|
Updated test 1560 to verify.
Closes #3880
|
|
Codacy/CppCheck warns about this. Consistently use parentheses as we
already do in some places to silence the warning.
Closes https://github.com/curl/curl/pull/3866
|
|
This reverts commit b0972bc.
- No longer show verbose output for the conncache closure handle.
The offending commit was added so that the conncache closure handle
would inherit verbose mode from the user's easy handle. (Note there is
no way for the user to set options for the closure handle which is why
that was necessary.) Other debug settings such as the debug function
were not also inherited since we determined that could lead to crashes
if the user's per-handle private data was used on an unexpected handle.
The reporter here says he has a debug function to capture the verbose
output, and does not expect or want any output to stderr; however
because the conncache closure handle does not inherit the debug function
the verbose output for that handle does go to stderr.
There are other plausible scenarios as well such as the user redirects
stderr on their handle, which is also not inherited since it could lead
to crashes when used on an unexpected handle.
Short of allowing the user to set options for the conncache closure
handle I don't think there's much we can safely do except no longer
inherit the verbose setting.
Bug: https://curl.haxx.se/mail/lib-2019-05/0021.html
Reported-by: Kristoffer Gleditsch
Ref: https://github.com/curl/curl/pull/3598
Ref: https://github.com/curl/curl/pull/3618
Closes https://github.com/curl/curl/pull/3856
|
|
|
|
The zoneid can be used with IPv6 numerical addresses.
Updated test 1560 to verify.
Closes #3834
|
|
... to make the host name "usable". Store the scope id and put it back
when extracting a URL out of it.
Also makes curl_url_set() syntax check CURLUPART_HOST.
Fixes #3817
Closes #3822
|
|
This limits all accepted input strings passed to libcurl to be less than
CURL_MAX_INPUT_LENGTH (8000000) bytes, for these API calls:
curl_easy_setopt() and curl_url_set().
The 8000000 number is arbitrary picked and is meant to detect mistakes
or abuse, not to limit actual practical use cases. By limiting the
acceptable string lengths we also reduce the risk of integer overflows
all over.
NOTE: This does not apply to `CURLOPT_POSTFIELDS`.
Test 1559 verifies.
Closes #3805
|
|
RFC 4616 specifies the authzid is optional in the client authentication
message and that the server will derive the authorisation identity
(authzid) from the authentication identity (authcid) when not specified
by the client.
|
|
|
|
|
|
which basically just makes sure LOGOUT is *not* issued on disconnect
|
|
Make sure to run curl_global_cleanup() when shutting down the test
suite to release any resources allocated in the SSL setup. This is
clearly visible when running tests with PolarSSL where the thread
lock calloc() memory which isn't released when not running cleanup.
Below is an excerpt from the autobuild logs:
==12368== 96 bytes in 1 blocks are possibly lost in loss record 1 of 2
==12368== at 0x4837B65: calloc (vg_replace_malloc.c:752)
==12368== by 0x11A76E: curl_dbg_calloc (memdebug.c:205)
==12368== by 0x145CDF: Curl_polarsslthreadlock_thread_setup
(polarssl_threadlock.c:54)
==12368== by 0x145B37: Curl_polarssl_init (polarssl.c:865)
==12368== by 0x14129D: Curl_ssl_init (vtls.c:171)
==12368== by 0x118B4C: global_init (easy.c:158)
==12368== by 0x118BF5: curl_global_init (easy.c:221)
==12368== by 0x118D0B: curl_easy_init (easy.c:299)
==12368== by 0x114E96: test (lib1906.c:32)
==12368== by 0x115495: main (first.c:174)
Closes #3783
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
... without a $srcdir prefix. Triggered by the failures in several
autobuilds.
Closes #3781
|
|
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
Mark global variables static to avoid compiler warning in Clang when
using -Wmissing-variable-declarations.
Closes #3778
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
