summaryrefslogtreecommitdiff
path: root/configure.ac
diff options
context:
space:
mode:
Diffstat (limited to 'configure.ac')
-rwxr-xr-xconfigure.ac1346
1 files changed, 73 insertions, 1273 deletions
diff --git a/configure.ac b/configure.ac
index 6d5ec2c0f..faf2b2129 100755
--- a/configure.ac
+++ b/configure.ac
@@ -24,7 +24,7 @@ dnl Process this file with autoconf to produce a configure script.
AC_PREREQ(2.57)
dnl We don't know the version number "statically" so we use a dash here
-AC_INIT([curl], [-], [a suitable curl mailing list: https://curl.haxx.se/mail/])
+AC_INIT([gnurl], [-], [a suitable curl mailing list: https://curl.haxx.se/mail/])
XC_OVR_ZZ50
XC_OVR_ZZ60
@@ -128,7 +128,7 @@ AC_SUBST([AR])
AC_SUBST(libext)
dnl figure out the libcurl version
-CURLVERSION=`$SED -ne 's/^#define LIBCURL_VERSION "\(.*\)".*/\1/p' ${srcdir}/include/curl/curlver.h`
+CURLVERSION=`$SED -ne 's/^#define LIBCURL_VERSION "\(.*\)".*/\1/p' ${srcdir}/include/gnurl/curlver.h`
XC_CHECK_PROG_CC
dnl for --enable-code-coverage
@@ -142,7 +142,7 @@ AC_SUBST(CURLVERSION)
dnl
dnl we extract the numerical version for curl-config only
-VERSIONNUM=`$SED -ne 's/^#define LIBCURL_VERSION_NUM 0x\([0-9A-Fa-f]*\).*/\1/p' ${srcdir}/include/curl/curlver.h`
+VERSIONNUM=`$SED -ne 's/^#define LIBCURL_VERSION_NUM 0x\([0-9A-Fa-f]*\).*/\1/p' ${srcdir}/include/gnurl/curlver.h`
AC_SUBST(VERSIONNUM)
dnl Solaris pkgadd support definitions
@@ -374,15 +374,6 @@ AC_ARG_ENABLE(http,
AC_HELP_STRING([--enable-http],[Enable HTTP support])
AC_HELP_STRING([--disable-http],[Disable HTTP support]),
[ case "$enableval" in
- no)
- AC_MSG_RESULT(no)
- AC_DEFINE(CURL_DISABLE_HTTP, 1, [to disable HTTP])
- disable_http="yes"
- AC_MSG_WARN([disable HTTP disables FTP over proxy and RTSP])
- AC_SUBST(CURL_DISABLE_HTTP, [1])
- AC_DEFINE(CURL_DISABLE_RTSP, 1, [to disable RTSP])
- AC_SUBST(CURL_DISABLE_RTSP, [1])
- ;;
*) AC_MSG_RESULT(yes)
;;
esac ],
@@ -393,46 +384,46 @@ AC_ARG_ENABLE(ftp,
AC_HELP_STRING([--enable-ftp],[Enable FTP support])
AC_HELP_STRING([--disable-ftp],[Disable FTP support]),
[ case "$enableval" in
- no)
+ *)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_FTP, 1, [to disable FTP])
AC_SUBST(CURL_DISABLE_FTP, [1])
;;
- *) AC_MSG_RESULT(yes)
- ;;
esac ],
- AC_MSG_RESULT(yes)
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_FTP, 1, [to disable FTP])
+ AC_SUBST(CURL_DISABLE_FTP, [1])
)
AC_MSG_CHECKING([whether to support file])
AC_ARG_ENABLE(file,
AC_HELP_STRING([--enable-file],[Enable FILE support])
AC_HELP_STRING([--disable-file],[Disable FILE support]),
[ case "$enableval" in
- no)
+ *)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_FILE, 1, [to disable FILE])
AC_SUBST(CURL_DISABLE_FILE, [1])
;;
- *) AC_MSG_RESULT(yes)
- ;;
esac ],
- AC_MSG_RESULT(yes)
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_FILE, 1, [to disable FILE])
+ AC_SUBST(CURL_DISABLE_FILE, [1])
)
AC_MSG_CHECKING([whether to support ldap])
AC_ARG_ENABLE(ldap,
AC_HELP_STRING([--enable-ldap],[Enable LDAP support])
AC_HELP_STRING([--disable-ldap],[Disable LDAP support]),
[ case "$enableval" in
- no)
+ *)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_LDAP, 1, [to disable LDAP])
AC_SUBST(CURL_DISABLE_LDAP, [1])
;;
- *)
- AC_MSG_RESULT(yes)
- ;;
esac ],[
- AC_MSG_RESULT(yes) ]
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_LDAP, 1, [to disable LDAP])
+ AC_SUBST(CURL_DISABLE_LDAP, [1])
+ ]
)
AC_MSG_CHECKING([whether to support ldaps])
AC_ARG_ENABLE(ldaps,
@@ -479,14 +470,16 @@ AC_HELP_STRING([--disable-rtsp],[Disable RTSP support]),
*) if test x$CURL_DISABLE_HTTP = x1 ; then
AC_MSG_ERROR(HTTP support needs to be enabled in order to enable RTSP support!)
else
- AC_MSG_RESULT(yes)
- curl_rtsp_msg="enabled"
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_RTSP, 1, [to disable RTSP])
+ AC_SUBST(CURL_DISABLE_RTSP, [1])
fi
;;
esac ],
if test "x$CURL_DISABLE_HTTP" != "x1"; then
- AC_MSG_RESULT(yes)
- curl_rtsp_msg="enabled"
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_RTSP, 1, [to disable RTSP])
+ AC_SUBST(CURL_DISABLE_RTSP, [1])
else
AC_MSG_RESULT(no)
fi
@@ -513,45 +506,45 @@ AC_ARG_ENABLE(dict,
AC_HELP_STRING([--enable-dict],[Enable DICT support])
AC_HELP_STRING([--disable-dict],[Disable DICT support]),
[ case "$enableval" in
- no)
+ *)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_DICT, 1, [to disable DICT])
AC_SUBST(CURL_DISABLE_DICT, [1])
;;
- *) AC_MSG_RESULT(yes)
- ;;
esac ],
- AC_MSG_RESULT(yes)
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_DICT, 1, [to disable DICT])
+ AC_SUBST(CURL_DISABLE_DICT, [1])
)
AC_MSG_CHECKING([whether to support telnet])
AC_ARG_ENABLE(telnet,
AC_HELP_STRING([--enable-telnet],[Enable TELNET support])
AC_HELP_STRING([--disable-telnet],[Disable TELNET support]),
[ case "$enableval" in
- no)
+ *)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_TELNET, 1, [to disable TELNET])
AC_SUBST(CURL_DISABLE_TELNET, [1])
;;
- *) AC_MSG_RESULT(yes)
- ;;
esac ],
- AC_MSG_RESULT(yes)
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_TELNET, 1, [to disable TELNET])
+ AC_SUBST(CURL_DISABLE_TELNET, [1])
)
AC_MSG_CHECKING([whether to support tftp])
AC_ARG_ENABLE(tftp,
AC_HELP_STRING([--enable-tftp],[Enable TFTP support])
AC_HELP_STRING([--disable-tftp],[Disable TFTP support]),
[ case "$enableval" in
- no)
+ *)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_TFTP, 1, [to disable TFTP])
AC_SUBST(CURL_DISABLE_TFTP, [1])
;;
- *) AC_MSG_RESULT(yes)
- ;;
esac ],
- AC_MSG_RESULT(yes)
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_TFTP, 1, [to disable TFTP])
+ AC_SUBST(CURL_DISABLE_TFTP, [1])
)
AC_MSG_CHECKING([whether to support pop3])
@@ -559,15 +552,15 @@ AC_ARG_ENABLE(pop3,
AC_HELP_STRING([--enable-pop3],[Enable POP3 support])
AC_HELP_STRING([--disable-pop3],[Disable POP3 support]),
[ case "$enableval" in
- no)
+ *)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_POP3, 1, [to disable POP3])
AC_SUBST(CURL_DISABLE_POP3, [1])
;;
- *) AC_MSG_RESULT(yes)
- ;;
esac ],
- AC_MSG_RESULT(yes)
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_POP3, 1, [to disable POP3])
+ AC_SUBST(CURL_DISABLE_POP3, [1])
)
@@ -576,15 +569,15 @@ AC_ARG_ENABLE(imap,
AC_HELP_STRING([--enable-imap],[Enable IMAP support])
AC_HELP_STRING([--disable-imap],[Disable IMAP support]),
[ case "$enableval" in
- no)
+ *)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_IMAP, 1, [to disable IMAP])
AC_SUBST(CURL_DISABLE_IMAP, [1])
;;
- *) AC_MSG_RESULT(yes)
- ;;
esac ],
- AC_MSG_RESULT(yes)
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_IMAP, 1, [to disable IMAP])
+ AC_SUBST(CURL_DISABLE_IMAP, [1])
)
@@ -593,15 +586,15 @@ AC_ARG_ENABLE(smb,
AC_HELP_STRING([--enable-smb],[Enable SMB/CIFS support])
AC_HELP_STRING([--disable-smb],[Disable SMB/CIFS support]),
[ case "$enableval" in
- no)
+ *)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_SMB, 1, [to disable SMB/CIFS])
AC_SUBST(CURL_DISABLE_SMB, [1])
;;
- *) AC_MSG_RESULT(yes)
- ;;
esac ],
- AC_MSG_RESULT(yes)
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_SMB, 1, [to disable SMB/CIFS])
+ AC_SUBST(CURL_DISABLE_SMB, [1])
)
AC_MSG_CHECKING([whether to support smtp])
@@ -609,15 +602,15 @@ AC_ARG_ENABLE(smtp,
AC_HELP_STRING([--enable-smtp],[Enable SMTP support])
AC_HELP_STRING([--disable-smtp],[Disable SMTP support]),
[ case "$enableval" in
- no)
+ *)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_SMTP, 1, [to disable SMTP])
AC_SUBST(CURL_DISABLE_SMTP, [1])
;;
- *) AC_MSG_RESULT(yes)
- ;;
esac ],
- AC_MSG_RESULT(yes)
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_SMTP, 1, [to disable SMTP])
+ AC_SUBST(CURL_DISABLE_SMTP, [1])
)
AC_MSG_CHECKING([whether to support gopher])
@@ -625,15 +618,15 @@ AC_ARG_ENABLE(gopher,
AC_HELP_STRING([--enable-gopher],[Enable Gopher support])
AC_HELP_STRING([--disable-gopher],[Disable Gopher support]),
[ case "$enableval" in
- no)
+ *)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_GOPHER, 1, [to disable Gopher])
AC_SUBST(CURL_DISABLE_GOPHER, [1])
;;
- *) AC_MSG_RESULT(yes)
- ;;
esac ],
- AC_MSG_RESULT(yes)
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_GOPHER, 1, [to disable Gopher])
+ AC_SUBST(CURL_DISABLE_GOPHER, [1])
)
@@ -1288,7 +1281,7 @@ dnl **********************************************************************
dnl Check for GSS-API libraries
dnl **********************************************************************
-dnl check for GSS-API stuff in the /usr as default
+dnl check for GSS-API stuff in the /usr as default. Note: possible candidate for removal.
GSSAPI_ROOT="/usr"
AC_ARG_WITH(gssapi-includes,
@@ -1329,7 +1322,7 @@ if test x"$want_gss" = xyes; then
if test -n "$host_alias" -a -f "$GSSAPI_ROOT/bin/$host_alias-krb5-config"; then
GSSAPI_INCS=`$GSSAPI_ROOT/bin/$host_alias-krb5-config --cflags gssapi`
elif test -f "$KRB5CONFIG"; then
- GSSAPI_INCS=`$KRB5CONFIG --cflags gssapi`
+ GSSAPI_INCS=`$KRB5CONFIG --cflags gssapi`
elif test "$GSSAPI_ROOT" != "yes"; then
GSSAPI_INCS="-I$GSSAPI_ROOT/include"
fi
@@ -1447,10 +1440,10 @@ if test x"$want_gss" = xyes; then
LDFLAGS="$LDFLAGS $GSSAPI_LIB_DIR"
case $host in
*-hp-hpux*)
- LIBS="-lgss $LIBS"
+ LIBS="lgss $LIBS"
;;
*)
- LIBS="-lgssapi $LIBS"
+ LIBS="-lgssapi -lkrb5 $LIBS"
;;
esac
fi
@@ -1498,70 +1491,6 @@ dnl check winssl option before other SSL libraries
dnl -------------------------------------------------
OPT_WINSSL=no
-AC_ARG_WITH(winssl,dnl
-AC_HELP_STRING([--with-winssl],[enable Windows native SSL/TLS])
-AC_HELP_STRING([--without-winssl], [disable Windows native SSL/TLS]),
- OPT_WINSSL=$withval)
-
-AC_ARG_WITH(schannel,dnl
-AC_HELP_STRING([--with-schannel],[enable Windows native SSL/TLS])
-AC_HELP_STRING([--without-schannel], [disable Windows native SSL/TLS]),
- OPT_WINSSL=$withval)
-
-AC_MSG_CHECKING([whether to enable Windows native SSL/TLS (Windows native builds only)])
-if test -z "$ssl_backends" -o "x$OPT_WINSSL" != xno; then
- ssl_msg=
- if test "x$OPT_WINSSL" != "xno" &&
- test "x$curl_cv_native_windows" = "xyes"; then
- AC_MSG_RESULT(yes)
- AC_DEFINE(USE_SCHANNEL, 1, [to enable Windows native SSL/TLS support])
- AC_SUBST(USE_SCHANNEL, [1])
- ssl_msg="Windows-native"
- test schannel != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
- WINSSL_ENABLED=1
- # --with-winssl implies --enable-sspi
- AC_DEFINE(USE_WINDOWS_SSPI, 1, [to enable SSPI support])
- AC_SUBST(USE_WINDOWS_SSPI, [1])
- curl_sspi_msg="enabled"
- LIBS="-lcrypt32 $LIBS"
- else
- AC_MSG_RESULT(no)
- fi
- test -z "$ssl_msg" || ssl_backends="${ssl_backends:+$ssl_backends, }$ssl_msg"
-else
- AC_MSG_RESULT(no)
-fi
-
-OPT_SECURETRANSPORT=no
-AC_ARG_WITH(darwinssl,dnl
-AC_HELP_STRING([--with-darwinssl],[enable Apple OS native SSL/TLS])
-AC_HELP_STRING([--without-darwinssl], [disable Apple OS native SSL/TLS]),
- OPT_SECURETRANSPORT=$withval)
-
-AC_ARG_WITH(secure-transport,dnl
-AC_HELP_STRING([--with-secure-transport],[enable Apple OS native SSL/TLS])
-AC_HELP_STRING([--without-secure-transport], [disable Apple OS native SSL/TLS]),
- OPT_SECURETRANSPORT=$withval)
-
-AC_MSG_CHECKING([whether to enable Secure Transport])
-if test -z "$ssl_backends" -o "x$OPT_SECURETRANSPORT" != xno; then
- if test "x$OPT_SECURETRANSPORT" != "xno" &&
- test -d "/System/Library/Frameworks/Security.framework"; then
- AC_MSG_RESULT(yes)
- AC_DEFINE(USE_SECTRANSP, 1, [enable Secure Transport])
- AC_SUBST(USE_SECTRANSP, [1])
- ssl_msg="Secure Transport"
- test secure-transport != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
- SECURETRANSPORT_ENABLED=1
- LDFLAGS="$LDFLAGS -framework CoreFoundation -framework Security"
- else
- AC_MSG_RESULT(no)
- fi
- test -z "$ssl_msg" || ssl_backends="${ssl_backends:+$ssl_backends, }$ssl_msg"
-else
- AC_MSG_RESULT(no)
-fi
-
OPT_AMISSL=no
AC_ARG_WITH(amissl,dnl
AC_HELP_STRING([--with-amissl],[enable Amiga native SSL/TLS (AmiSSL)])
@@ -1599,295 +1528,6 @@ dnl Default to compiler & linker defaults for SSL files & libraries.
OPT_SSL=off
dnl Default to no CA bundle
ca="no"
-AC_ARG_WITH(ssl,dnl
-AC_HELP_STRING([--with-ssl=PATH],[Where to look for OpenSSL, PATH points to the SSL installation (default: /usr/local/ssl); when possible, set the PKG_CONFIG_PATH environment variable instead of using this option])
-AC_HELP_STRING([--without-ssl], [disable OpenSSL]),
- OPT_SSL=$withval)
-
-if test -z "$ssl_backends" -o "x$OPT_SSL" != xno &&
- test X"$OPT_SSL" != Xno; then
- ssl_msg=
-
- dnl backup the pre-ssl variables
- CLEANLDFLAGS="$LDFLAGS"
- CLEANCPPFLAGS="$CPPFLAGS"
- CLEANLIBS="$LIBS"
-
- dnl This is for Msys/Mingw
- case $host in
- *-*-msys* | *-*-mingw*)
- AC_MSG_CHECKING([for gdi32])
- my_ac_save_LIBS=$LIBS
- LIBS="-lgdi32 $LIBS"
- AC_TRY_LINK([#include <windef.h>
- #include <wingdi.h>],
- [GdiFlush();],
- [ dnl worked!
- AC_MSG_RESULT([yes])],
- [ dnl failed, restore LIBS
- LIBS=$my_ac_save_LIBS
- AC_MSG_RESULT(no)]
- )
- ;;
- esac
-
- case "$OPT_SSL" in
- yes)
- dnl --with-ssl (without path) used
- if test x$cross_compiling != xyes; then
- dnl only do pkg-config magic when not cross-compiling
- PKGTEST="yes"
- fi
- PREFIX_OPENSSL=/usr/local/ssl
- LIB_OPENSSL="$PREFIX_OPENSSL/lib$libsuff"
- ;;
- off)
- dnl no --with-ssl option given, just check default places
- if test x$cross_compiling != xyes; then
- dnl only do pkg-config magic when not cross-compiling
- PKGTEST="yes"
- fi
- PREFIX_OPENSSL=
- ;;
- *)
- dnl check the given --with-ssl spot
- PKGTEST="no"
- PREFIX_OPENSSL=$OPT_SSL
-
- dnl Try pkg-config even when cross-compiling. Since we
- dnl specify PKG_CONFIG_LIBDIR we're only looking where
- dnl the user told us to look
- OPENSSL_PCDIR="$OPT_SSL/lib/pkgconfig"
- if test -f "$OPENSSL_PCDIR/openssl.pc"; then
- AC_MSG_NOTICE([PKG_CONFIG_LIBDIR will be set to "$OPENSSL_PCDIR"])
- PKGTEST="yes"
- elif test ! -f "$PREFIX_OPENSSL/include/openssl/ssl.h"; then
- AC_MSG_ERROR([$PREFIX_OPENSSL is a bad --with-ssl prefix!])
- fi
-
- dnl in case pkg-config comes up empty, use what we got
- dnl via --with-ssl
- LIB_OPENSSL="$PREFIX_OPENSSL/lib$libsuff"
- if test "$PREFIX_OPENSSL" != "/usr" ; then
- SSL_LDFLAGS="-L$LIB_OPENSSL"
- SSL_CPPFLAGS="-I$PREFIX_OPENSSL/include"
- fi
- SSL_CPPFLAGS="$SSL_CPPFLAGS -I$PREFIX_OPENSSL/include/openssl"
- ;;
- esac
-
- if test "$PKGTEST" = "yes"; then
-
- CURL_CHECK_PKGCONFIG(openssl, [$OPENSSL_PCDIR])
-
- if test "$PKGCONFIG" != "no" ; then
- SSL_LIBS=`CURL_EXPORT_PCDIR([$OPENSSL_PCDIR]) dnl
- $PKGCONFIG --libs-only-l --libs-only-other openssl 2>/dev/null`
-
- SSL_LDFLAGS=`CURL_EXPORT_PCDIR([$OPENSSL_PCDIR]) dnl
- $PKGCONFIG --libs-only-L openssl 2>/dev/null`
-
- SSL_CPPFLAGS=`CURL_EXPORT_PCDIR([$OPENSSL_PCDIR]) dnl
- $PKGCONFIG --cflags-only-I openssl 2>/dev/null`
-
- AC_SUBST(SSL_LIBS)
- AC_MSG_NOTICE([pkg-config: SSL_LIBS: "$SSL_LIBS"])
- AC_MSG_NOTICE([pkg-config: SSL_LDFLAGS: "$SSL_LDFLAGS"])
- AC_MSG_NOTICE([pkg-config: SSL_CPPFLAGS: "$SSL_CPPFLAGS"])
-
- LIB_OPENSSL=`echo $SSL_LDFLAGS | sed -e 's/-L//g'`
-
- dnl use the values pkg-config reported. This is here
- dnl instead of below with CPPFLAGS and LDFLAGS because we only
- dnl learn about this via pkg-config. If we only have
- dnl the argument to --with-ssl we don't know what
- dnl additional libs may be necessary. Hope that we
- dnl don't need any.
- LIBS="$SSL_LIBS $LIBS"
- fi
- fi
-
- dnl finally, set flags to use SSL
- CPPFLAGS="$CPPFLAGS $SSL_CPPFLAGS"
- LDFLAGS="$LDFLAGS $SSL_LDFLAGS"
-
- AC_CHECK_LIB(crypto, HMAC_Update,[
- HAVECRYPTO="yes"
- LIBS="-lcrypto $LIBS"
- ],[
- LDFLAGS="$CLEANLDFLAGS -L$LIB_OPENSSL"
- if test "$PKGCONFIG" = "no" ; then
- # only set this if pkg-config wasn't used
- CPPFLAGS="$CLEANCPPFLAGS -I$PREFIX_OPENSSL/include/openssl -I$PREFIX_OPENSSL/include"
- fi
- AC_CHECK_LIB(crypto, HMAC_Init_ex,[
- HAVECRYPTO="yes"
- LIBS="-lcrypto $LIBS"], [
-
- dnl still no, but what about with -ldl?
- AC_MSG_CHECKING([OpenSSL linking with -ldl])
- LIBS="$CLEANLIBS -lcrypto -ldl"
- AC_TRY_LINK(
- [
- #include <openssl/err.h>
- ],
- [
- ERR_clear_error();
- ],
- [
- AC_MSG_RESULT(yes)
- HAVECRYPTO="yes"
- ],
- [
- AC_MSG_RESULT(no)
- dnl ok, so what about both -ldl and -lpthread?
-
- AC_MSG_CHECKING([OpenSSL linking with -ldl and -lpthread])
- LIBS="$CLEANLIBS -lcrypto -ldl -lpthread"
- AC_TRY_LINK(
- [
- #include <openssl/err.h>
- ],
- [
- ERR_clear_error();
- ],
- [
- AC_MSG_RESULT(yes)
- HAVECRYPTO="yes"
- ],
- [
- AC_MSG_RESULT(no)
- LDFLAGS="$CLEANLDFLAGS"
- CPPFLAGS="$CLEANCPPFLAGS"
- LIBS="$CLEANLIBS"
-
- ])
-
- ])
-
- ])
- ])
-
- if test X"$HAVECRYPTO" = X"yes"; then
- dnl This is only reasonable to do if crypto actually is there: check for
- dnl SSL libs NOTE: it is important to do this AFTER the crypto lib
-
- AC_CHECK_LIB(ssl, SSL_connect)
-
- if test "$ac_cv_lib_ssl_SSL_connect" != yes; then
- dnl we didn't find the SSL lib, try the RSAglue/rsaref stuff
- AC_MSG_CHECKING(for ssl with RSAglue/rsaref libs in use);
- OLIBS=$LIBS
- LIBS="-lRSAglue -lrsaref $LIBS"
- AC_CHECK_LIB(ssl, SSL_connect)
- if test "$ac_cv_lib_ssl_SSL_connect" != yes; then
- dnl still no SSL_connect
- AC_MSG_RESULT(no)
- LIBS=$OLIBS
- else
- AC_MSG_RESULT(yes)
- fi
-
- else
-
- dnl Have the libraries--check for OpenSSL headers
- AC_CHECK_HEADERS(openssl/x509.h openssl/rsa.h openssl/crypto.h \
- openssl/pem.h openssl/ssl.h openssl/err.h,
- ssl_msg="OpenSSL"
- test openssl != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
- OPENSSL_ENABLED=1
- AC_DEFINE(USE_OPENSSL, 1, [if OpenSSL is in use]))
-
- if test $ac_cv_header_openssl_x509_h = no; then
- dnl we don't use the "action" part of the AC_CHECK_HEADERS macro
- dnl since 'err.h' might in fact find a krb4 header with the same
- dnl name
- AC_CHECK_HEADERS(x509.h rsa.h crypto.h pem.h ssl.h err.h)
-
- if test $ac_cv_header_x509_h = yes &&
- test $ac_cv_header_crypto_h = yes &&
- test $ac_cv_header_ssl_h = yes; then
- dnl three matches
- ssl_msg="OpenSSL"
- OPENSSL_ENABLED=1
- fi
- fi
- fi
-
- if test X"$OPENSSL_ENABLED" != X"1"; then
- LIBS="$CLEANLIBS"
- fi
-
- if test X"$OPT_SSL" != Xoff &&
- test "$OPENSSL_ENABLED" != "1"; then
- AC_MSG_ERROR([OpenSSL libs and/or directories were not found where specified!])
- fi
- fi
-
- if test X"$OPENSSL_ENABLED" = X"1"; then
- dnl These can only exist if OpenSSL exists
- dnl Older versions of Cyassl (some time before 2.9.4) don't have
- dnl SSL_get_shutdown (but this check won't actually detect it there
- dnl as it's a macro that needs the header files be included)
- dnl OpenSSL_version is introduced in 3.0.0
-
- AC_CHECK_FUNCS( RAND_egd \
- SSL_get_shutdown \
- SSLv2_client_method \
- OpenSSL_version )
-
- AC_MSG_CHECKING([for BoringSSL])
- AC_COMPILE_IFELSE([
- AC_LANG_PROGRAM([[
- #include <openssl/base.h>
- ]],[[
- #ifndef OPENSSL_IS_BORINGSSL
- #error not boringssl
- #endif
- ]])
- ],[
- AC_MSG_RESULT([yes])
- AC_DEFINE_UNQUOTED(HAVE_BORINGSSL, 1,
- [Define to 1 if using BoringSSL.])
- ssl_msg="BoringSSL"
- ],[
- AC_MSG_RESULT([no])
- ])
-
- AC_MSG_CHECKING([for libressl])
- AC_COMPILE_IFELSE([
- AC_LANG_PROGRAM([[
-#include <openssl/opensslv.h>
- ]],[[
- int dummy = LIBRESSL_VERSION_NUMBER;
- ]])
- ],[
- AC_MSG_RESULT([yes])
- AC_DEFINE_UNQUOTED(HAVE_LIBRESSL, 1,
- [Define to 1 if using libressl.])
- ssl_msg="libressl"
- ],[
- AC_MSG_RESULT([no])
- ])
- fi
-
- if test "$OPENSSL_ENABLED" = "1"; then
- if test -n "$LIB_OPENSSL"; then
- dnl when the ssl shared libs were found in a path that the run-time
- dnl linker doesn't search through, we need to add it to CURL_LIBRARY_PATH
- dnl to prevent further configure tests to fail due to this
- if test "x$cross_compiling" != "xyes"; then
- CURL_LIBRARY_PATH="$CURL_LIBRARY_PATH:$LIB_OPENSSL"
- export CURL_LIBRARY_PATH
- AC_MSG_NOTICE([Added $LIB_OPENSSL to CURL_LIBRARY_PATH])
- fi
- fi
- CURL_CHECK_OPENSSL_API
- check_for_ca_bundle=1
- fi
-
- test -z "$ssl_msg" || ssl_backends="${ssl_backends:+$ssl_backends, }$ssl_msg"
-fi
dnl **********************************************************************
dnl Check for the random seed preferences
@@ -1955,7 +1595,7 @@ dnl check for GnuTLS
dnl ----------------------------------------------------
dnl Default to compiler & linker defaults for GnuTLS files & libraries.
-OPT_GNUTLS=no
+OPT_GNUTLS=yes
AC_ARG_WITH(gnutls,dnl
AC_HELP_STRING([--with-gnutls=PATH],[where to look for GnuTLS, PATH points to the installation root])
@@ -2110,590 +1750,18 @@ if test "$GNUTLS_ENABLED" = "1"; then
])
fi
-dnl ----------------------------------------------------
-dnl check for PolarSSL
-dnl ----------------------------------------------------
-
-dnl Default to compiler & linker defaults for PolarSSL files & libraries.
OPT_POLARSSL=no
-
-_cppflags=$CPPFLAGS
-_ldflags=$LDFLAGS
-AC_ARG_WITH(polarssl,dnl
-AC_HELP_STRING([--with-polarssl=PATH],[where to look for PolarSSL, PATH points to the installation root])
-AC_HELP_STRING([--without-polarssl], [disable PolarSSL detection]),
- OPT_POLARSSL=$withval)
-
-if test -z "$ssl_backends" -o "x$OPT_POLARSSL" != xno; then
- ssl_msg=
-
- if test X"$OPT_POLARSSL" != Xno; then
-
- if test "$OPT_POLARSSL" = "yes"; then
- OPT_POLARSSL=""
- fi
-
- if test -z "$OPT_POLARSSL" ; then
- dnl check for lib first without setting any new path
-
- AC_CHECK_LIB(polarssl, havege_init,
- dnl libpolarssl found, set the variable
- [
- AC_DEFINE(USE_POLARSSL, 1, [if PolarSSL is enabled])
- AC_SUBST(USE_POLARSSL, [1])
- POLARSSL_ENABLED=1
- USE_POLARSSL="yes"
- ssl_msg="PolarSSL"
- test polarssl != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
- ])
- fi
-
- addld=""
- addlib=""
- addcflags=""
- polarssllib=""
-
- if test "x$USE_POLARSSL" != "xyes"; then
- dnl add the path and test again
- addld=-L$OPT_POLARSSL/lib$libsuff
- addcflags=-I$OPT_POLARSSL/include
- polarssllib=$OPT_POLARSSL/lib$libsuff
-
- LDFLAGS="$LDFLAGS $addld"
- if test "$addcflags" != "-I/usr/include"; then
- CPPFLAGS="$CPPFLAGS $addcflags"
- fi
-
- AC_CHECK_LIB(polarssl, ssl_init,
- [
- AC_DEFINE(USE_POLARSSL, 1, [if PolarSSL is enabled])
- AC_SUBST(USE_POLARSSL, [1])
- POLARSSL_ENABLED=1
- USE_POLARSSL="yes"
- ssl_msg="PolarSSL"
- test polarssl != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
- ],
- [
- CPPFLAGS=$_cppflags
- LDFLAGS=$_ldflags
- ])
- fi
-
- if test "x$USE_POLARSSL" = "xyes"; then
- AC_MSG_NOTICE([detected PolarSSL])
- check_for_ca_bundle=1
- LIBS="-lpolarssl $LIBS"
-
- if test -n "$polarssllib"; then
- dnl when shared libs were found in a path that the run-time
- dnl linker doesn't search through, we need to add it to
- dnl CURL_LIBRARY_PATH to prevent further configure tests to fail
- dnl due to this
- if test "x$cross_compiling" != "xyes"; then
- CURL_LIBRARY_PATH="$CURL_LIBRARY_PATH:$polarssllib"
- export CURL_LIBRARY_PATH
- AC_MSG_NOTICE([Added $polarssllib to CURL_LIBRARY_PATH])
- fi
- fi
- fi
-
- fi dnl PolarSSL not disabled
-
- test -z "$ssl_msg" || ssl_backends="${ssl_backends:+$ssl_backends, }$ssl_msg"
-fi
-
-dnl ----------------------------------------------------
-dnl check for mbedTLS
-dnl ----------------------------------------------------
-
OPT_MBEDTLS=no
-
-_cppflags=$CPPFLAGS
-_ldflags=$LDFLAGS
-AC_ARG_WITH(mbedtls,dnl
-AC_HELP_STRING([--with-mbedtls=PATH],[where to look for mbedTLS, PATH points to the installation root])
-AC_HELP_STRING([--without-mbedtls], [disable mbedTLS detection]),
- OPT_MBEDTLS=$withval)
-
-if test -z "$ssl_backends" -o "x$OPT_MBEDTLS" != xno; then
- ssl_msg=
-
- if test X"$OPT_MBEDTLS" != Xno; then
-
- if test "$OPT_MBEDTLS" = "yes"; then
- OPT_MBEDTLS=""
- fi
-
- if test -z "$OPT_MBEDTLS" ; then
- dnl check for lib first without setting any new path
-
- AC_CHECK_LIB(mbedtls, mbedtls_havege_init,
- dnl libmbedtls found, set the variable
- [
- AC_DEFINE(USE_MBEDTLS, 1, [if mbedTLS is enabled])
- AC_SUBST(USE_MBEDTLS, [1])
- MBEDTLS_ENABLED=1
- USE_MBEDTLS="yes"
- ssl_msg="mbedTLS"
- test mbedtls != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
- ], [], -lmbedx509 -lmbedcrypto)
- fi
-
- addld=""
- addlib=""
- addcflags=""
- mbedtlslib=""
-
- if test "x$USE_MBEDTLS" != "xyes"; then
- dnl add the path and test again
- addld=-L$OPT_MBEDTLS/lib$libsuff
- addcflags=-I$OPT_MBEDTLS/include
- mbedtlslib=$OPT_MBEDTLS/lib$libsuff
-
- LDFLAGS="$LDFLAGS $addld"
- if test "$addcflags" != "-I/usr/include"; then
- CPPFLAGS="$CPPFLAGS $addcflags"
- fi
-
- AC_CHECK_LIB(mbedtls, mbedtls_ssl_init,
- [
- AC_DEFINE(USE_MBEDTLS, 1, [if mbedTLS is enabled])
- AC_SUBST(USE_MBEDTLS, [1])
- MBEDTLS_ENABLED=1
- USE_MBEDTLS="yes"
- ssl_msg="mbedTLS"
- test mbedtls != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
- ],
- [
- CPPFLAGS=$_cppflags
- LDFLAGS=$_ldflags
- ], -lmbedx509 -lmbedcrypto)
- fi
-
- if test "x$USE_MBEDTLS" = "xyes"; then
- AC_MSG_NOTICE([detected mbedTLS])
- check_for_ca_bundle=1
-
- LIBS="-lmbedtls -lmbedx509 -lmbedcrypto $LIBS"
-
- if test -n "$mbedtlslib"; then
- dnl when shared libs were found in a path that the run-time
- dnl linker doesn't search through, we need to add it to
- dnl CURL_LIBRARY_PATH to prevent further configure tests to fail
- dnl due to this
- if test "x$cross_compiling" != "xyes"; then
- CURL_LIBRARY_PATH="$CURL_LIBRARY_PATH:$mbedtlslib"
- export CURL_LIBRARY_PATH
- AC_MSG_NOTICE([Added $mbedtlslib to CURL_LIBRARY_PATH])
- fi
- fi
- fi
-
- fi dnl mbedTLS not disabled
-
- test -z "$ssl_msg" || ssl_backends="${ssl_backends:+$ssl_backends, }$ssl_msg"
-fi
-
-dnl ----------------------------------------------------
-dnl check for CyaSSL
-dnl ----------------------------------------------------
-
-dnl Default to compiler & linker defaults for CyaSSL files & libraries.
OPT_CYASSL=no
-
-_cppflags=$CPPFLAGS
-_ldflags=$LDFLAGS
-AC_ARG_WITH(cyassl,dnl
-AC_HELP_STRING([--with-cyassl=PATH],[where to look for CyaSSL, PATH points to the installation root (default: system lib default)])
-AC_HELP_STRING([--without-cyassl], [disable CyaSSL detection]),
- OPT_CYASSL=$withval)
-
-dnl provide --with-wolfssl as an alias for --with-cyassl
-AC_ARG_WITH(wolfssl,dnl
-AC_HELP_STRING([--with-wolfssl=PATH],[where to look for WolfSSL, PATH points to the installation root (default: system lib default)])
-AC_HELP_STRING([--without-wolfssl], [disable WolfSSL detection]),
- OPT_CYASSL=$withval)
-
-if test -z "$ssl_backends" -o "x$OPT_CYASSL" != xno; then
- ssl_msg=
-
- if test X"$OPT_CYASSL" != Xno; then
-
- if test "$OPT_CYASSL" = "yes"; then
- OPT_CYASSL=""
- fi
-
- dnl This should be reworked to use pkg-config instead
-
- cyassllibname=cyassl
-
- if test -z "$OPT_CYASSL" ; then
- dnl check for lib in system default first
-
- AC_CHECK_LIB(cyassl, CyaSSL_Init,
- dnl libcyassl found, set the variable
- [
- AC_DEFINE(USE_CYASSL, 1, [if CyaSSL is enabled])
- AC_SUBST(USE_CYASSL, [1])
- CYASSL_ENABLED=1
- USE_CYASSL="yes"
- ssl_msg="CyaSSL"
- test cyassl != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
- ])
- fi
-
- addld=""
- addlib=""
- addcflags=""
- cyassllib=""
-
- if test "x$USE_CYASSL" != "xyes"; then
- dnl add the path and test again
- addld=-L$OPT_CYASSL/lib$libsuff
- addcflags=-I$OPT_CYASSL/include
- cyassllib=$OPT_CYASSL/lib$libsuff
-
- LDFLAGS="$LDFLAGS $addld"
- if test "$addcflags" != "-I/usr/include"; then
- CPPFLAGS="$CPPFLAGS $addcflags"
- fi
-
- AC_CHECK_LIB(cyassl, CyaSSL_Init,
- [
- AC_DEFINE(USE_CYASSL, 1, [if CyaSSL is enabled])
- AC_SUBST(USE_CYASSL, [1])
- CYASSL_ENABLED=1
- USE_CYASSL="yes"
- ssl_msg="CyaSSL"
- test cyassl != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
- ],
- [
- CPPFLAGS=$_cppflags
- LDFLAGS=$_ldflags
- cyassllib=""
- ])
- fi
-
- addld=""
- addlib=""
- addcflags=""
-
- if test "x$USE_CYASSL" != "xyes"; then
- dnl libcyassl renamed to libwolfssl as of 3.4.0
- addld=-L$OPT_CYASSL/lib$libsuff
- addcflags=-I$OPT_CYASSL/include
- cyassllib=$OPT_CYASSL/lib$libsuff
-
- LDFLAGS="$LDFLAGS $addld"
- if test "$addcflags" != "-I/usr/include"; then
- CPPFLAGS="$CPPFLAGS $addcflags"
- fi
-
- cyassllibname=wolfssl
- my_ac_save_LIBS="$LIBS"
- LIBS="-l$cyassllibname -lm $LIBS"
-
- AC_MSG_CHECKING([for CyaSSL_Init in -lwolfssl])
- AC_LINK_IFELSE([
- AC_LANG_PROGRAM([[
-/* These aren't needed for detection and confuse WolfSSL.
- They are set up properly later if it is detected. */
-#undef SIZEOF_LONG
-#undef SIZEOF_LONG_LONG
-#include <cyassl/ssl.h>
- ]],[[
- return CyaSSL_Init();
- ]])
- ],[
- AC_MSG_RESULT(yes)
- AC_DEFINE(USE_CYASSL, 1, [if CyaSSL/WolfSSL is enabled])
- AC_SUBST(USE_CYASSL, [1])
- CYASSL_ENABLED=1
- USE_CYASSL="yes"
- ssl_msg="WolfSSL"
- test cyassl != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
- ],
- [
- AC_MSG_RESULT(no)
- CPPFLAGS=$_cppflags
- LDFLAGS=$_ldflags
- cyassllib=""
- ])
- LIBS="$my_ac_save_LIBS"
- fi
-
- if test "x$USE_CYASSL" = "xyes"; then
- AC_MSG_NOTICE([detected $cyassllibname])
- check_for_ca_bundle=1
-
- dnl cyassl/ctaocrypt/types.h needs SIZEOF_LONG_LONG defined!
- AX_COMPILE_CHECK_SIZEOF(long long)
-
- dnl Versions since at least 2.6.0 may have options.h
- AC_CHECK_HEADERS(cyassl/options.h)
-
- dnl Versions since at least 2.9.4 renamed error.h to error-ssl.h
- AC_CHECK_HEADERS(cyassl/error-ssl.h)
-
- LIBS="-l$cyassllibname -lm $LIBS"
-
- if test "x$cyassllibname" = "xwolfssl"; then
- dnl Recent WolfSSL versions build without SSLv3 by default
- dnl WolfSSL needs configure --enable-opensslextra to have *get_peer*
- AC_CHECK_FUNCS(wolfSSLv3_client_method \
- wolfSSL_get_peer_certificate \
- wolfSSL_UseALPN)
- else
- dnl Cyassl needs configure --enable-opensslextra to have *get_peer*
- AC_CHECK_FUNCS(CyaSSL_CTX_UseSupportedCurve \
- CyaSSL_get_peer_certificate)
- fi
-
- if test -n "$cyassllib"; then
- dnl when shared libs were found in a path that the run-time
- dnl linker doesn't search through, we need to add it to
- dnl CURL_LIBRARY_PATH to prevent further configure tests to fail
- dnl due to this
- if test "x$cross_compiling" != "xyes"; then
- CURL_LIBRARY_PATH="$CURL_LIBRARY_PATH:$cyassllib"
- export CURL_LIBRARY_PATH
- AC_MSG_NOTICE([Added $cyassllib to CURL_LIBRARY_PATH])
- fi
- fi
-
- fi
-
- fi dnl CyaSSL not disabled
-
- test -z "$ssl_msg" || ssl_backends="${ssl_backends:+$ssl_backends, }$ssl_msg"
-fi
-
-dnl ----------------------------------------------------
-dnl check for MesaLink
-dnl ----------------------------------------------------
-
-dnl Default to compiler & linker defaults for MesaLink files & libraries.
-OPT_MESALINK=no
-
-_cppflags=$CPPFLAGS
-_ldflags=$LDFLAGS
-AC_ARG_WITH(mesalink,dnl
-AC_HELP_STRING([--with-mesalink=PATH],[where to look for MesaLink, PATH points to the installation root])
-AC_HELP_STRING([--without-mesalink], [disable MesaLink detection]),
- OPT_MESALINK=$withval)
-
-if test -z "$ssl_backends" -o "x$OPT_MESALINK" != xno; then
- ssl_msg=
-
- if test X"$OPT_MESALINK" != Xno; then
-
- if test "$OPT_MESALINK" = "yes"; then
- OPT_MESALINK=""
- fi
-
- if test -z "$OPT_MESALINK" ; then
- dnl check for lib first without setting any new path
-
- AC_CHECK_LIB(mesalink, mesalink_library_init,
- dnl libmesalink found, set the variable
- [
- AC_DEFINE(USE_MESALINK, 1, [if MesaLink is enabled])
- AC_SUBST(USE_MESALINK, [1])
- MESALINK_ENABLED=1
- USE_MESALINK="yes"
- ssl_msg="MesaLink"
- test mesalink != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
- ])
- fi
-
- addld=""
- addlib=""
- addcflags=""
- mesalinklib=""
-
- if test "x$USE_MESALINK" != "xyes"; then
- dnl add the path and test again
- addld=-L$OPT_MESALINK/lib$libsuff
- addcflags=-I$OPT_MESALINK/include
- mesalinklib=$OPT_MESALINK/lib$libsuff
-
- LDFLAGS="$LDFLAGS $addld"
- if test "$addcflags" != "-I/usr/include"; then
- CPPFLAGS="$CPPFLAGS $addcflags"
- fi
-
- AC_CHECK_LIB(mesalink, mesalink_library_init,
- [
- AC_DEFINE(USE_MESALINK, 1, [if MesaLink is enabled])
- AC_SUBST(USE_MESALINK, [1])
- MESALINK_ENABLED=1
- USE_MESALINK="yes"
- ssl_msg="MesaLink"
- test mesalink != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
- ],
- [
- CPPFLAGS=$_cppflags
- LDFLAGS=$_ldflags
- ])
- fi
-
- if test "x$USE_MESALINK" = "xyes"; then
- AC_MSG_NOTICE([detected MesaLink])
-
- LIBS="-lmesalink $LIBS"
-
- if test -n "$mesalinklib"; then
- dnl when shared libs were found in a path that the run-time
- dnl linker doesn't search through, we need to add it to
- dnl LD_LIBRARY_PATH to prevent further configure tests to fail
- dnl due to this
- if test "x$cross_compiling" != "xyes"; then
- LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$mesalinklib"
- export LD_LIBRARY_PATH
- AC_MSG_NOTICE([Added $mesalinklib to LD_LIBRARY_PATH])
- fi
- fi
- fi
-
- fi dnl MesaLink not disabled
-
- test -z "$ssl_msg" || ssl_backends="${ssl_backends:+$ssl_backends, }$ssl_msg"
-fi
-
-dnl ----------------------------------------------------
dnl NSS. Only check if GnuTLS and OpenSSL are not enabled
-dnl ----------------------------------------------------
-
-dnl Default to compiler & linker defaults for NSS files & libraries.
OPT_NSS=no
+OPT_AXTLS=off
+OPT_MESALINK=no
-AC_ARG_WITH(nss,dnl
-AC_HELP_STRING([--with-nss=PATH],[where to look for NSS, PATH points to the installation root])
-AC_HELP_STRING([--without-nss], [disable NSS detection]),
- OPT_NSS=$withval)
-
-if test -z "$ssl_backends" -o "x$OPT_NSS" != xno; then
- ssl_msg=
-
- if test X"$OPT_NSS" != Xno; then
-
- addld=""
- addlib=""
- addcflags=""
- nssprefix=""
- version=""
-
- if test "x$OPT_NSS" = "xyes"; then
-
- CURL_CHECK_PKGCONFIG(nss)
-
- if test "$PKGCONFIG" != "no" ; then
- addlib=`$PKGCONFIG --libs nss`
- addcflags=`$PKGCONFIG --cflags nss`
- version=`$PKGCONFIG --modversion nss`
- nssprefix=`$PKGCONFIG --variable=prefix nss`
- else
- dnl Without pkg-config, we check for nss-config
-
- check=`nss-config --version 2>/dev/null`
- if test -n "$check"; then
- addlib=`nss-config --libs`
- addcflags=`nss-config --cflags`
- version=`nss-config --version`
- nssprefix=`nss-config --prefix`
- else
- addlib="-lnss3"
- addcflags=""
- version="unknown"
- fi
- fi
- else
- NSS_PCDIR="$OPT_NSS/lib/pkgconfig"
- if test -f "$NSS_PCDIR/nss.pc"; then
- CURL_CHECK_PKGCONFIG(nss, [$NSS_PCDIR])
- if test "$PKGCONFIG" != "no" ; then
- addld=`CURL_EXPORT_PCDIR([$NSS_PCDIR]) $PKGCONFIG --libs-only-L nss`
- addlib=`CURL_EXPORT_PCDIR([$NSS_PCDIR]) $PKGCONFIG --libs-only-l nss`
- addcflags=`CURL_EXPORT_PCDIR([$NSS_PCDIR]) $PKGCONFIG --cflags nss`
- version=`CURL_EXPORT_PCDIR([$NSS_PCDIR]) $PKGCONFIG --modversion nss`
- nssprefix=`CURL_EXPORT_PCDIR([$NSS_PCDIR]) $PKGCONFIG --variable=prefix nss`
- fi
- fi
- fi
-
- if test -z "$addlib"; then
- # Without pkg-config, we'll kludge in some defaults
- AC_MSG_WARN([Using hard-wired libraries and compilation flags for NSS.])
- addld="-L$OPT_NSS/lib"
- addlib="-lssl3 -lsmime3 -lnss3 -lplds4 -lplc4 -lnspr4"
- addcflags="-I$OPT_NSS/include"
- version="unknown"
- nssprefix=$OPT_NSS
- fi
-
- CLEANLDFLAGS="$LDFLAGS"
- CLEANLIBS="$LIBS"
- CLEANCPPFLAGS="$CPPFLAGS"
-
- LDFLAGS="$addld $LDFLAGS"
- LIBS="$addlib $LIBS"
- if test "$addcflags" != "-I/usr/include"; then
- CPPFLAGS="$CPPFLAGS $addcflags"
- fi
-
- dnl The function SSL_VersionRangeSet() is needed to enable TLS > 1.0
- AC_CHECK_LIB(nss3, SSL_VersionRangeSet,
- [
- AC_DEFINE(USE_NSS, 1, [if NSS is enabled])
- AC_SUBST(USE_NSS, [1])
- USE_NSS="yes"
- NSS_ENABLED=1
- ssl_msg="NSS"
- test nss != "$DEFAULT_SSL_BACKEND" || VALID_DEFAULT_SSL_BACKEND=yes
- ],
- [
- LDFLAGS="$CLEANLDFLAGS"
- LIBS="$CLEANLIBS"
- CPPFLAGS="$CLEANCPPFLAGS"
- ])
-
- if test "x$USE_NSS" = "xyes"; then
- AC_MSG_NOTICE([detected NSS version $version])
-
- dnl PK11_CreateManagedGenericObject() was introduced in NSS 3.34 because
- dnl PK11_DestroyGenericObject() does not release resources allocated by
- dnl PK11_CreateGenericObject() early enough.
- AC_CHECK_FUNC(PK11_CreateManagedGenericObject,
- [
- AC_DEFINE(HAVE_PK11_CREATEMANAGEDGENERICOBJECT, 1,
- [if you have the PK11_CreateManagedGenericObject function])
- ])
-
- dnl needed when linking the curl tool without USE_EXPLICIT_LIB_DEPS
- NSS_LIBS=$addlib
- AC_SUBST([NSS_LIBS])
-
- dnl when shared libs were found in a path that the run-time
- dnl linker doesn't search through, we need to add it to
- dnl CURL_LIBRARY_PATH to prevent further configure tests to fail
- dnl due to this
- if test "x$cross_compiling" != "xyes"; then
- CURL_LIBRARY_PATH="$CURL_LIBRARY_PATH:$nssprefix/lib$libsuff"
- export CURL_LIBRARY_PATH
- AC_MSG_NOTICE([Added $nssprefix/lib$libsuff to CURL_LIBRARY_PATH])
- fi
-
- fi dnl NSS found
-
- fi dnl NSS not disabled
-
- test -z "$ssl_msg" || ssl_backends="${ssl_backends:+$ssl_backends, }$ssl_msg"
-fi
-
-case "x$OPENSSL_ENABLED$GNUTLS_ENABLED$NSS_ENABLED$POLARSSL_ENABLED$MBEDTLS_ENABLED$CYASSL_ENABLED$WINSSL_ENABLED$SECURETRANSPORT_ENABLED$MESALINK_ENABLED$AMISSL_ENABLED" in
+case "x$OPENSSL_ENABLED$GNUTLS_ENABLED$NSS_ENABLED$POLARSSL_ENABLED$MBEDTLS_ENABLED$AXTLS_ENABLED$CYASSL_ENABLED$WINSSL_ENABLED$DARWINSSL_ENABLED$MESALINK_ENABLED" in
x)
AC_MSG_WARN([SSL disabled, you will not be able to use HTTPS, FTPS, NTLM and more.])
- AC_MSG_WARN([Use --with-ssl, --with-gnutls, --with-polarssl, --with-cyassl, --with-nss, --with-schannel, --with-secure-transport, --with-mesalink or --with-amissl to address this.])
+ AC_MSG_WARN([Use --with-ssl, --with-gnutls, --with-polarssl, --with-cyassl, --with-nss, --with-axtls, --with-winssl, --with-darwinssl, or --with-mesalink to address this.])
;;
x1)
# one SSL backend is enabled
@@ -2822,7 +1890,7 @@ if test X"$OPT_LIBMETALINK" != Xno; then
]])
],[
AC_MSG_RESULT([yes ($version)])
- want_metalink="yes"
+ want_metalink="no"
],[
AC_MSG_RESULT([no ($version)])
AC_MSG_NOTICE([libmetalink library defective or too old])
@@ -2864,153 +1932,7 @@ AC_HELP_STRING([--with-libssh=PATH],[Where to look for libssh, PATH points to th
AC_HELP_STRING([--with-libssh], [enable LIBSSH]),
OPT_LIBSSH=$withval, OPT_LIBSSH=no)
-if test X"$OPT_LIBSSH2" != Xno; then
- dnl backup the pre-libssh2 variables
- CLEANLDFLAGS="$LDFLAGS"
- CLEANCPPFLAGS="$CPPFLAGS"
- CLEANLIBS="$LIBS"
-
- case "$OPT_LIBSSH2" in
- yes)
- dnl --with-libssh2 (without path) used
- CURL_CHECK_PKGCONFIG(libssh2)
-
- if test "$PKGCONFIG" != "no" ; then
- LIB_SSH2=`$PKGCONFIG --libs libssh2`
- LD_SSH2=`$PKGCONFIG --libs-only-L libssh2`
- CPP_SSH2=`$PKGCONFIG --cflags-only-I libssh2`
- version=`$PKGCONFIG --modversion libssh2`
- DIR_SSH2=`echo $LD_SSH2 | $SED -e 's/-L//'`
- fi
-
- ;;
- off)
- dnl no --with-libssh2 option given, just check default places
- ;;
- *)
- dnl use the given --with-libssh2 spot
- PREFIX_SSH2=$OPT_LIBSSH2
- ;;
- esac
-
- dnl if given with a prefix, we set -L and -I based on that
- if test -n "$PREFIX_SSH2"; then
- LIB_SSH2="-lssh2"
- LD_SSH2=-L${PREFIX_SSH2}/lib$libsuff
- CPP_SSH2=-I${PREFIX_SSH2}/include
- DIR_SSH2=${PREFIX_SSH2}/lib$libsuff
- fi
-
- LDFLAGS="$LDFLAGS $LD_SSH2"
- CPPFLAGS="$CPPFLAGS $CPP_SSH2"
- LIBS="$LIB_SSH2 $LIBS"
-
- AC_CHECK_LIB(ssh2, libssh2_channel_open_ex)
-
- AC_CHECK_HEADERS(libssh2.h,
- curl_ssh_msg="enabled (libSSH2)"
- LIBSSH2_ENABLED=1
- AC_DEFINE(USE_LIBSSH2, 1, [if libSSH2 is in use])
- AC_SUBST(USE_LIBSSH2, [1])
- )
-
- if test X"$OPT_LIBSSH2" != Xoff &&
- test "$LIBSSH2_ENABLED" != "1"; then
- AC_MSG_ERROR([libSSH2 libs and/or directories were not found where specified!])
- fi
-
- if test "$LIBSSH2_ENABLED" = "1"; then
- if test -n "$DIR_SSH2"; then
- dnl when the libssh2 shared libs were found in a path that the run-time
- dnl linker doesn't search through, we need to add it to CURL_LIBRARY_PATH
- dnl to prevent further configure tests to fail due to this
-
- if test "x$cross_compiling" != "xyes"; then
- CURL_LIBRARY_PATH="$CURL_LIBRARY_PATH:$DIR_SSH2"
- export CURL_LIBRARY_PATH
- AC_MSG_NOTICE([Added $DIR_SSH2 to CURL_LIBRARY_PATH])
- fi
- fi
- else
- dnl no libssh2, revert back to clean variables
- LDFLAGS=$CLEANLDFLAGS
- CPPFLAGS=$CLEANCPPFLAGS
- LIBS=$CLEANLIBS
- fi
-elif test X"$OPT_LIBSSH" != Xno; then
- dnl backup the pre-libssh variables
- CLEANLDFLAGS="$LDFLAGS"
- CLEANCPPFLAGS="$CPPFLAGS"
- CLEANLIBS="$LIBS"
-
- case "$OPT_LIBSSH" in
- yes)
- dnl --with-libssh (without path) used
- CURL_CHECK_PKGCONFIG(libssh)
-
- if test "$PKGCONFIG" != "no" ; then
- LIB_SSH=`$PKGCONFIG --libs-only-l libssh`
- LD_SSH=`$PKGCONFIG --libs-only-L libssh`
- CPP_SSH=`$PKGCONFIG --cflags-only-I libssh`
- version=`$PKGCONFIG --modversion libssh`
- DIR_SSH=`echo $LD_SSH | $SED -e 's/-L//'`
- fi
-
- ;;
- off)
- dnl no --with-libssh option given, just check default places
- ;;
- *)
- dnl use the given --with-libssh spot
- PREFIX_SSH=$OPT_LIBSSH
- ;;
- esac
-
- dnl if given with a prefix, we set -L and -I based on that
- if test -n "$PREFIX_SSH"; then
- LIB_SSH="-lssh"
- LD_SSH=-L${PREFIX_SSH}/lib$libsuff
- CPP_SSH=-I${PREFIX_SSH}/include
- DIR_SSH=${PREFIX_SSH}/lib$libsuff
- fi
-
- LDFLAGS="$LDFLAGS $LD_SSH"
- CPPFLAGS="$CPPFLAGS $CPP_SSH"
- LIBS="$LIB_SSH $LIBS"
-
- AC_CHECK_LIB(ssh, ssh_new)
-
- AC_CHECK_HEADERS(libssh/libssh.h,
- curl_ssh_msg="enabled (libSSH)"
- LIBSSH_ENABLED=1
- AC_DEFINE(USE_LIBSSH, 1, [if libSSH is in use])
- AC_SUBST(USE_LIBSSH, [1])
- )
-
- if test X"$OPT_LIBSSH" != Xoff &&
- test "$LIBSSH_ENABLED" != "1"; then
- AC_MSG_ERROR([libSSH libs and/or directories were not found where specified!])
- fi
-
- if test "$LIBSSH_ENABLED" = "1"; then
- if test -n "$DIR_SSH"; then
- dnl when the libssh shared libs were found in a path that the run-time
- dnl linker doesn't search through, we need to add it to CURL_LIBRARY_PATH
- dnl to prevent further configure tests to fail due to this
-
- if test "x$cross_compiling" != "xyes"; then
- CURL_LIBRARY_PATH="$CURL_LIBRARY_PATH:$DIR_SSH"
- export CURL_LIBRARY_PATH
- AC_MSG_NOTICE([Added $DIR_SSH to CURL_LIBRARY_PATH])
- fi
- fi
- else
- dnl no libssh, revert back to clean variables
- LDFLAGS=$CLEANLDFLAGS
- CPPFLAGS=$CLEANCPPFLAGS
- LIBS=$CLEANLIBS
- fi
-fi
+LIBSSH2_ENABLED="0"
dnl **********************************************************************
dnl Check for the presence of LIBRTMP libraries and headers
@@ -3023,73 +1945,7 @@ AC_HELP_STRING([--with-librtmp=PATH],[Where to look for librtmp, PATH points to
AC_HELP_STRING([--without-librtmp], [disable LIBRTMP]),
OPT_LIBRTMP=$withval)
-if test X"$OPT_LIBRTMP" != Xno; then
- dnl backup the pre-librtmp variables
- CLEANLDFLAGS="$LDFLAGS"
- CLEANCPPFLAGS="$CPPFLAGS"
- CLEANLIBS="$LIBS"
-
- case "$OPT_LIBRTMP" in
- yes)
- dnl --with-librtmp (without path) used
- CURL_CHECK_PKGCONFIG(librtmp)
-
- if test "$PKGCONFIG" != "no" ; then
- LIB_RTMP=`$PKGCONFIG --libs-only-l librtmp`
- LD_RTMP=`$PKGCONFIG --libs-only-L librtmp`
- CPP_RTMP=`$PKGCONFIG --cflags-only-I librtmp`
- version=`$PKGCONFIG --modversion librtmp`
- DIR_RTMP=`echo $LD_RTMP | $SED -e 's/-L//'`
- else
- dnl To avoid link errors, we do not allow --librtmp without
- dnl a pkgconfig file
- AC_MSG_ERROR([--librtmp was specified but could not find librtmp pkgconfig file.])
- fi
-
- ;;
- off)
- dnl no --with-librtmp option given, just check default places
- LIB_RTMP="-lrtmp"
- ;;
- *)
- dnl use the given --with-librtmp spot
- LIB_RTMP="-lrtmp"
- PREFIX_RTMP=$OPT_LIBRTMP
- ;;
- esac
-
- dnl if given with a prefix, we set -L and -I based on that
- if test -n "$PREFIX_RTMP"; then
- LD_RTMP=-L${PREFIX_RTMP}/lib$libsuff
- CPP_RTMP=-I${PREFIX_RTMP}/include
- DIR_RTMP=${PREFIX_RTMP}/lib$libsuff
- fi
-
- LDFLAGS="$LDFLAGS $LD_RTMP"
- CPPFLAGS="$CPPFLAGS $CPP_RTMP"
- LIBS="$LIB_RTMP $LIBS"
-
- AC_CHECK_LIB(rtmp, RTMP_Init,
- [
- AC_CHECK_HEADERS(librtmp/rtmp.h,
- curl_rtmp_msg="enabled (librtmp)"
- LIBRTMP_ENABLED=1
- AC_DEFINE(USE_LIBRTMP, 1, [if librtmp is in use])
- AC_SUBST(USE_LIBRTMP, [1])
- )
- ],
- dnl not found, revert back to clean variables
- LDFLAGS=$CLEANLDFLAGS
- CPPFLAGS=$CLEANCPPFLAGS
- LIBS=$CLEANLIBS
- )
-
- if test X"$OPT_LIBRTMP" != Xoff &&
- test "$LIBRTMP_ENABLED" != "1"; then
- AC_MSG_ERROR([librtmp libs and/or directories were not found where specified!])
- fi
-
-fi
+LIBRTMP_ENABLED="0"
dnl **********************************************************************
dnl Check for linker switch for versioned symbols
@@ -3161,67 +2017,12 @@ case "$OPT_WINIDN" in
want_winidn="no"
AC_MSG_RESULT([no])
;;
- yes)
- dnl --with-winidn option used without path
- want_winidn="yes"
- want_winidn_path="default"
- AC_MSG_RESULT([yes])
- ;;
*)
- dnl --with-winidn option used with path
- want_winidn="yes"
- want_winidn_path="$withval"
- AC_MSG_RESULT([yes ($withval)])
+ want_winidn="no"
+ AC_MSG_RESULT([no])
;;
esac
-if test "$want_winidn" = "yes"; then
- dnl winidn library support has been requested
- clean_CPPFLAGS="$CPPFLAGS"
- clean_LDFLAGS="$LDFLAGS"
- clean_LIBS="$LIBS"
- WINIDN_LIBS="-lnormaliz"
- WINIDN_CPPFLAGS="-DWINVER=0x0600"
- #
- if test "$want_winidn_path" != "default"; then
- dnl path has been specified
- dnl pkg-config not available or provides no info
- WINIDN_LDFLAGS="-L$want_winidn_path/lib$libsuff"
- WINIDN_CPPFLAGS="-I$want_winidn_path/include"
- WINIDN_DIR="$want_winidn_path/lib$libsuff"
- fi
- #
- CPPFLAGS="$CPPFLAGS $WINIDN_CPPFLAGS"
- LDFLAGS="$LDFLAGS $WINIDN_LDFLAGS"
- LIBS="$WINIDN_LIBS $LIBS"
- #
- AC_MSG_CHECKING([if IdnToUnicode can be linked])
- AC_LINK_IFELSE([
- AC_LANG_PROGRAM([[
- #include <windows.h>
- ]],[[
- IdnToUnicode(0, NULL, 0, NULL, 0);
- ]])
- ],[
- AC_MSG_RESULT([yes])
- tst_links_winidn="yes"
- ],[
- AC_MSG_RESULT([no])
- tst_links_winidn="no"
- ])
- #
- if test "$tst_links_winidn" = "yes"; then
- AC_DEFINE(USE_WIN32_IDN, 1, [Define to 1 if you have the `normaliz' (WinIDN) library (-lnormaliz).])
- AC_DEFINE(WANT_IDN_PROTOTYPES, 1, [Define to 1 to provide own prototypes.])
- AC_SUBST([IDN_ENABLED], [1])
- curl_idn_msg="enabled (Windows-native)"
- else
- AC_MSG_WARN([Cannot find libraries for IDN support: IDN disabled])
- CPPFLAGS="$clean_CPPFLAGS"
- LDFLAGS="$clean_LDFLAGS"
- LIBS="$clean_LIBS"
- fi
-fi
dnl **********************************************************************
dnl Check for the presence of IDN libraries and headers
@@ -3593,7 +2394,7 @@ AX_COMPILE_CHECK_SIZEOF(off_t)
o=$CPPFLAGS
CPPFLAGS="-I$srcdir/include $CPPFLAGS"
AX_COMPILE_CHECK_SIZEOF(curl_off_t, [
-#include <curl/system.h>
+#include <gnurl/system.h>
])
CPPFLAGS=$o
@@ -4172,7 +2973,6 @@ dnl to let curl-config output the static libraries correctly
ENABLE_STATIC="$enable_static"
AC_SUBST(ENABLE_STATIC)
-
dnl
dnl For keeping supported features and protocols also in pkg-config file
dnl since it is more cross-compile friendly than curl-config
@@ -4379,7 +3179,7 @@ AC_CONFIG_FILES([Makefile \
docs/libcurl/opts/Makefile \
docs/cmdline-opts/Makefile \
include/Makefile \
- include/curl/Makefile \
+ include/gnurl/Makefile \
src/Makefile \
lib/Makefile \
scripts/Makefile \
@@ -4393,8 +3193,8 @@ AC_CONFIG_FILES([Makefile \
tests/unit/Makefile \
packages/Makefile \
packages/vms/Makefile \
- curl-config \
- libcurl.pc
+ gnurl-config \
+ libgnurl.pc
])
AC_OUTPUT
@@ -4402,7 +3202,7 @@ CURL_GENERATE_CONFIGUREHELP_PM
XC_AMEND_DISTCLEAN([lib src tests/unit tests/server tests/libtest docs/examples])
-AC_MSG_NOTICE([Configured to build curl/libcurl:
+AC_MSG_NOTICE([Configured to build gnurl/libgnurl:
Host setup: ${host}
Install prefix: ${prefix}
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-09 08:25:38 +0000