quickjs-tart

crypto.h (245000B)

---

 /**
  * \file psa/crypto.h
  * \brief Platform Security Architecture cryptography module
  */
 /*
  *  Copyright The Mbed TLS Contributors
  *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
  */
 
 #ifndef PSA_CRYPTO_H
 #define PSA_CRYPTO_H
 
 #if defined(MBEDTLS_PSA_CRYPTO_PLATFORM_FILE)
 #include MBEDTLS_PSA_CRYPTO_PLATFORM_FILE
 #else
 #include "crypto_platform.h"
 #endif
 
 #include <stddef.h>
 
 #ifdef __DOXYGEN_ONLY__
 /* This __DOXYGEN_ONLY__ block contains mock definitions for things that
  * must be defined in the crypto_platform.h header. These mock definitions
  * are present in this file as a convenience to generate pretty-printed
  * documentation that includes those definitions. */
 
 /** \defgroup platform Implementation-specific definitions
  * @{
  */
 
 /**@}*/
 #endif /* __DOXYGEN_ONLY__ */
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 /* The file "crypto_types.h" declares types that encode errors,
  * algorithms, key types, policies, etc. */
 #include "crypto_types.h"
 
 /** \defgroup version API version
  * @{
  */
 
 /**
  * The major version of this implementation of the PSA Crypto API
  */
 #define PSA_CRYPTO_API_VERSION_MAJOR 1
 
 /**
  * The minor version of this implementation of the PSA Crypto API
  */
 #define PSA_CRYPTO_API_VERSION_MINOR 0
 
 /**@}*/
 
 /* The file "crypto_values.h" declares macros to build and analyze values
  * of integral types defined in "crypto_types.h". */
 #include "crypto_values.h"
 
 /* The file "crypto_sizes.h" contains definitions for size calculation
  * macros whose definitions are implementation-specific. */
 #include "crypto_sizes.h"
 
 /* The file "crypto_struct.h" contains definitions for
  * implementation-specific structs that are declared above. */
 #if defined(MBEDTLS_PSA_CRYPTO_STRUCT_FILE)
 #include MBEDTLS_PSA_CRYPTO_STRUCT_FILE
 #else
 #include "crypto_struct.h"
 #endif
 
 /** \defgroup initialization Library initialization
  * @{
  */
 
 /**
  * \brief Library initialization.
  *
  * Applications must call this function before calling any other
  * function in this module.
  *
  * Applications may call this function more than once. Once a call
  * succeeds, subsequent calls are guaranteed to succeed.
  *
  * If the application calls other functions before calling psa_crypto_init(),
  * the behavior is undefined. Implementations are encouraged to either perform
  * the operation as if the library had been initialized or to return
  * #PSA_ERROR_BAD_STATE or some other applicable error. In particular,
  * implementations should not return a success status if the lack of
  * initialization may have security implications, for example due to improper
  * seeding of the random number generator.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  */
 psa_status_t psa_crypto_init(void);
 
 /**@}*/
 
 /** \addtogroup attributes
  * @{
  */
 
 /** \def PSA_KEY_ATTRIBUTES_INIT
  *
  * This macro returns a suitable initializer for a key attribute structure
  * of type #psa_key_attributes_t.
  */
 
 /** Return an initial value for a key attributes structure.
  */
 static psa_key_attributes_t psa_key_attributes_init(void);
 
 /** Declare a key as persistent and set its key identifier.
  *
  * If the attribute structure currently declares the key as volatile (which
  * is the default content of an attribute structure), this function sets
  * the lifetime attribute to #PSA_KEY_LIFETIME_PERSISTENT.
  *
  * This function does not access storage, it merely stores the given
  * value in the structure.
  * The persistent key will be written to storage when the attribute
  * structure is passed to a key creation function such as
  * psa_import_key(), psa_generate_key(), psa_generate_key_custom(),
  * psa_key_derivation_output_key(), psa_key_derivation_output_key_custom()
  * or psa_copy_key().
  *
  * This function may be declared as `static` (i.e. without external
  * linkage). This function may be provided as a function-like macro,
  * but in this case it must evaluate each of its arguments exactly once.
  *
  * \param[out] attributes  The attribute structure to write to.
  * \param key              The persistent identifier for the key.
  *                         This can be any value in the range from
  *                         #PSA_KEY_ID_USER_MIN to #PSA_KEY_ID_USER_MAX
  *                         inclusive.
  */
 static void psa_set_key_id(psa_key_attributes_t *attributes,
                            mbedtls_svc_key_id_t key);
 
 #ifdef MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
 /** Set the owner identifier of a key.
  *
  * When key identifiers encode key owner identifiers, psa_set_key_id() does
  * not allow to define in key attributes the owner of volatile keys as
  * psa_set_key_id() enforces the key to be persistent.
  *
  * This function allows to set in key attributes the owner identifier of a
  * key. It is intended to be used for volatile keys. For persistent keys,
  * it is recommended to use the PSA Cryptography API psa_set_key_id() to define
  * the owner of a key.
  *
  * \param[out] attributes  The attribute structure to write to.
  * \param owner            The key owner identifier.
  */
 static void mbedtls_set_key_owner_id(psa_key_attributes_t *attributes,
                                      mbedtls_key_owner_id_t owner);
 #endif
 
 /** Set the location of a persistent key.
  *
  * To make a key persistent, you must give it a persistent key identifier
  * with psa_set_key_id(). By default, a key that has a persistent identifier
  * is stored in the default storage area identifier by
  * #PSA_KEY_LIFETIME_PERSISTENT. Call this function to choose a storage
  * area, or to explicitly declare the key as volatile.
  *
  * This function does not access storage, it merely stores the given
  * value in the structure.
  * The persistent key will be written to storage when the attribute
  * structure is passed to a key creation function such as
  * psa_import_key(), psa_generate_key(), psa_generate_key_custom(),
  * psa_key_derivation_output_key(), psa_key_derivation_output_key_custom()
  * or psa_copy_key().
  *
  * This function may be declared as `static` (i.e. without external
  * linkage). This function may be provided as a function-like macro,
  * but in this case it must evaluate each of its arguments exactly once.
  *
  * \param[out] attributes       The attribute structure to write to.
  * \param lifetime              The lifetime for the key.
  *                              If this is #PSA_KEY_LIFETIME_VOLATILE, the
  *                              key will be volatile, and the key identifier
  *                              attribute is reset to 0.
  */
 static void psa_set_key_lifetime(psa_key_attributes_t *attributes,
                                  psa_key_lifetime_t lifetime);
 
 /** Retrieve the key identifier from key attributes.
  *
  * This function may be declared as `static` (i.e. without external
  * linkage). This function may be provided as a function-like macro,
  * but in this case it must evaluate its argument exactly once.
  *
  * \param[in] attributes        The key attribute structure to query.
  *
  * \return The persistent identifier stored in the attribute structure.
  *         This value is unspecified if the attribute structure declares
  *         the key as volatile.
  */
 static mbedtls_svc_key_id_t psa_get_key_id(
     const psa_key_attributes_t *attributes);
 
 /** Retrieve the lifetime from key attributes.
  *
  * This function may be declared as `static` (i.e. without external
  * linkage). This function may be provided as a function-like macro,
  * but in this case it must evaluate its argument exactly once.
  *
  * \param[in] attributes        The key attribute structure to query.
  *
  * \return The lifetime value stored in the attribute structure.
  */
 static psa_key_lifetime_t psa_get_key_lifetime(
     const psa_key_attributes_t *attributes);
 
 /** Declare usage flags for a key.
  *
  * Usage flags are part of a key's usage policy. They encode what
  * kind of operations are permitted on the key. For more details,
  * refer to the documentation of the type #psa_key_usage_t.
  *
  * This function overwrites any usage flags
  * previously set in \p attributes.
  *
  * This function may be declared as `static` (i.e. without external
  * linkage). This function may be provided as a function-like macro,
  * but in this case it must evaluate each of its arguments exactly once.
  *
  * \param[out] attributes       The attribute structure to write to.
  * \param usage_flags           The usage flags to write.
  */
 static void psa_set_key_usage_flags(psa_key_attributes_t *attributes,
                                     psa_key_usage_t usage_flags);
 
 /** Retrieve the usage flags from key attributes.
  *
  * This function may be declared as `static` (i.e. without external
  * linkage). This function may be provided as a function-like macro,
  * but in this case it must evaluate its argument exactly once.
  *
  * \param[in] attributes        The key attribute structure to query.
  *
  * \return The usage flags stored in the attribute structure.
  */
 static psa_key_usage_t psa_get_key_usage_flags(
     const psa_key_attributes_t *attributes);
 
 /** Declare the permitted algorithm policy for a key.
  *
  * The permitted algorithm policy of a key encodes which algorithm or
  * algorithms are permitted to be used with this key. The following
  * algorithm policies are supported:
  * - 0 does not allow any cryptographic operation with the key. The key
  *   may be used for non-cryptographic actions such as exporting (if
  *   permitted by the usage flags).
  * - An algorithm value permits this particular algorithm.
  * - An algorithm wildcard built from #PSA_ALG_ANY_HASH allows the specified
  *   signature scheme with any hash algorithm.
  * - An algorithm built from #PSA_ALG_AT_LEAST_THIS_LENGTH_MAC allows
  *   any MAC algorithm from the same base class (e.g. CMAC) which
  *   generates/verifies a MAC length greater than or equal to the length
  *   encoded in the wildcard algorithm.
  * - An algorithm built from #PSA_ALG_AEAD_WITH_AT_LEAST_THIS_LENGTH_TAG
  *   allows any AEAD algorithm from the same base class (e.g. CCM) which
  *   generates/verifies a tag length greater than or equal to the length
  *   encoded in the wildcard algorithm.
  *
  * This function overwrites any algorithm policy
  * previously set in \p attributes.
  *
  * This function may be declared as `static` (i.e. without external
  * linkage). This function may be provided as a function-like macro,
  * but in this case it must evaluate each of its arguments exactly once.
  *
  * \param[out] attributes       The attribute structure to write to.
  * \param alg                   The permitted algorithm policy to write.
  */
 static void psa_set_key_algorithm(psa_key_attributes_t *attributes,
                                   psa_algorithm_t alg);
 
 
 /** Retrieve the algorithm policy from key attributes.
  *
  * This function may be declared as `static` (i.e. without external
  * linkage). This function may be provided as a function-like macro,
  * but in this case it must evaluate its argument exactly once.
  *
  * \param[in] attributes        The key attribute structure to query.
  *
  * \return The algorithm stored in the attribute structure.
  */
 static psa_algorithm_t psa_get_key_algorithm(
     const psa_key_attributes_t *attributes);
 
 /** Declare the type of a key.
  *
  * This function overwrites any key type
  * previously set in \p attributes.
  *
  * This function may be declared as `static` (i.e. without external
  * linkage). This function may be provided as a function-like macro,
  * but in this case it must evaluate each of its arguments exactly once.
  *
  * \param[out] attributes       The attribute structure to write to.
  * \param type                  The key type to write.
  *                              If this is 0, the key type in \p attributes
  *                              becomes unspecified.
  */
 static void psa_set_key_type(psa_key_attributes_t *attributes,
                              psa_key_type_t type);
 
 
 /** Declare the size of a key.
  *
  * This function overwrites any key size previously set in \p attributes.
  *
  * This function may be declared as `static` (i.e. without external
  * linkage). This function may be provided as a function-like macro,
  * but in this case it must evaluate each of its arguments exactly once.
  *
  * \param[out] attributes       The attribute structure to write to.
  * \param bits                  The key size in bits.
  *                              If this is 0, the key size in \p attributes
  *                              becomes unspecified. Keys of size 0 are
  *                              not supported.
  */
 static void psa_set_key_bits(psa_key_attributes_t *attributes,
                              size_t bits);
 
 /** Retrieve the key type from key attributes.
  *
  * This function may be declared as `static` (i.e. without external
  * linkage). This function may be provided as a function-like macro,
  * but in this case it must evaluate its argument exactly once.
  *
  * \param[in] attributes        The key attribute structure to query.
  *
  * \return The key type stored in the attribute structure.
  */
 static psa_key_type_t psa_get_key_type(const psa_key_attributes_t *attributes);
 
 /** Retrieve the key size from key attributes.
  *
  * This function may be declared as `static` (i.e. without external
  * linkage). This function may be provided as a function-like macro,
  * but in this case it must evaluate its argument exactly once.
  *
  * \param[in] attributes        The key attribute structure to query.
  *
  * \return The key size stored in the attribute structure, in bits.
  */
 static size_t psa_get_key_bits(const psa_key_attributes_t *attributes);
 
 /** Retrieve the attributes of a key.
  *
  * This function first resets the attribute structure as with
  * psa_reset_key_attributes(). It then copies the attributes of
  * the given key into the given attribute structure.
  *
  * \note This function may allocate memory or other resources.
  *       Once you have called this function on an attribute structure,
  *       you must call psa_reset_key_attributes() to free these resources.
  *
  * \param[in] key               Identifier of the key to query.
  * \param[in,out] attributes    On success, the attributes of the key.
  *                              On failure, equivalent to a
  *                              freshly-initialized structure.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_get_key_attributes(mbedtls_svc_key_id_t key,
                                     psa_key_attributes_t *attributes);
 
 /** Reset a key attribute structure to a freshly initialized state.
  *
  * You must initialize the attribute structure as described in the
  * documentation of the type #psa_key_attributes_t before calling this
  * function. Once the structure has been initialized, you may call this
  * function at any time.
  *
  * This function frees any auxiliary resources that the structure
  * may contain.
  *
  * \param[in,out] attributes    The attribute structure to reset.
  */
 void psa_reset_key_attributes(psa_key_attributes_t *attributes);
 
 /**@}*/
 
 /** \defgroup key_management Key management
  * @{
  */
 
 /** Remove non-essential copies of key material from memory.
  *
  * If the key identifier designates a volatile key, this functions does not do
  * anything and returns successfully.
  *
  * If the key identifier designates a persistent key, then this function will
  * free all resources associated with the key in volatile memory. The key
  * data in persistent storage is not affected and the key can still be used.
  *
  * \param key Identifier of the key to purge.
  *
  * \retval #PSA_SUCCESS
  *         The key material will have been removed from memory if it is not
  *         currently required.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not a valid key identifier.
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_purge_key(mbedtls_svc_key_id_t key);
 
 /** Make a copy of a key.
  *
  * Copy key material from one location to another.
  *
  * This function is primarily useful to copy a key from one location
  * to another, since it populates a key using the material from
  * another key which may have a different lifetime.
  *
  * This function may be used to share a key with a different party,
  * subject to implementation-defined restrictions on key sharing.
  *
  * The policy on the source key must have the usage flag
  * #PSA_KEY_USAGE_COPY set.
  * This flag is sufficient to permit the copy if the key has the lifetime
  * #PSA_KEY_LIFETIME_VOLATILE or #PSA_KEY_LIFETIME_PERSISTENT.
  * Some secure elements do not provide a way to copy a key without
  * making it extractable from the secure element. If a key is located
  * in such a secure element, then the key must have both usage flags
  * #PSA_KEY_USAGE_COPY and #PSA_KEY_USAGE_EXPORT in order to make
  * a copy of the key outside the secure element.
  *
  * The resulting key may only be used in a way that conforms to
  * both the policy of the original key and the policy specified in
  * the \p attributes parameter:
  * - The usage flags on the resulting key are the bitwise-and of the
  *   usage flags on the source policy and the usage flags in \p attributes.
  * - If both allow the same algorithm or wildcard-based
  *   algorithm policy, the resulting key has the same algorithm policy.
  * - If either of the policies allows an algorithm and the other policy
  *   allows a wildcard-based algorithm policy that includes this algorithm,
  *   the resulting key allows the same algorithm.
  * - If the policies do not allow any algorithm in common, this function
  *   fails with the status #PSA_ERROR_INVALID_ARGUMENT.
  *
  * The effect of this function on implementation-defined attributes is
  * implementation-defined.
  *
  * \param source_key        The key to copy. It must allow the usage
  *                          #PSA_KEY_USAGE_COPY. If a private or secret key is
  *                          being copied outside of a secure element it must
  *                          also allow #PSA_KEY_USAGE_EXPORT.
  * \param[in] attributes    The attributes for the new key.
  *                          They are used as follows:
  *                          - The key type and size may be 0. If either is
  *                            nonzero, it must match the corresponding
  *                            attribute of the source key.
  *                          - The key location (the lifetime and, for
  *                            persistent keys, the key identifier) is
  *                            used directly.
  *                          - The policy constraints (usage flags and
  *                            algorithm policy) are combined from
  *                            the source key and \p attributes so that
  *                            both sets of restrictions apply, as
  *                            described in the documentation of this function.
  * \param[out] target_key   On success, an identifier for the newly created
  *                          key. For persistent keys, this is the key
  *                          identifier defined in \p attributes.
  *                          \c 0 on failure.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_HANDLE
  *         \p source_key is invalid.
  * \retval #PSA_ERROR_ALREADY_EXISTS
  *         This is an attempt to create a persistent key, and there is
  *         already a persistent key with the given identifier.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The lifetime or identifier in \p attributes are invalid, or
  *         the policy constraints on the source and specified in
  *         \p attributes are incompatible, or
  *         \p attributes specifies a key type or key size
  *         which does not match the attributes of the source key.
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The source key does not have the #PSA_KEY_USAGE_COPY usage flag, or
  *         the source key is not exportable and its lifetime does not
  *         allow copying it to the target's lifetime.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_copy_key(mbedtls_svc_key_id_t source_key,
                           const psa_key_attributes_t *attributes,
                           mbedtls_svc_key_id_t *target_key);
 
 
 /**
  * \brief Destroy a key.
  *
  * This function destroys a key from both volatile
  * memory and, if applicable, non-volatile storage. Implementations shall
  * make a best effort to ensure that the key material cannot be recovered.
  *
  * This function also erases any metadata such as policies and frees
  * resources associated with the key.
  *
  * If a key is currently in use in a multipart operation, then destroying the
  * key will cause the multipart operation to fail.
  *
  * \warning    We can only guarantee that the the key material will
  *             eventually be wiped from memory. With threading enabled
  *             and during concurrent execution, copies of the key material may
  *             still exist until all threads have finished using the key.
  *
  * \param key  Identifier of the key to erase. If this is \c 0, do nothing and
  *             return #PSA_SUCCESS.
  *
  * \retval #PSA_SUCCESS
  *         \p key was a valid identifier and the key material that it
  *         referred to has been erased. Alternatively, \p key is \c 0.
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The key cannot be erased because it is
  *         read-only, either due to a policy or due to physical restrictions.
  * \retval #PSA_ERROR_INVALID_HANDLE
  *         \p key is not a valid identifier nor \c 0.
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE
  *         There was a failure in communication with the cryptoprocessor.
  *         The key material may still be present in the cryptoprocessor.
  * \retval #PSA_ERROR_DATA_INVALID
  *         This error is typically a result of either storage corruption on a
  *         cleartext storage backend, or an attempt to read data that was
  *         written by an incompatible version of the library.
  * \retval #PSA_ERROR_STORAGE_FAILURE
  *         The storage is corrupted. Implementations shall make a best effort
  *         to erase key material even in this stage, however applications
  *         should be aware that it may be impossible to guarantee that the
  *         key material is not recoverable in such cases.
  * \retval #PSA_ERROR_CORRUPTION_DETECTED
  *         An unexpected condition which is not a storage corruption or
  *         a communication failure occurred. The cryptoprocessor may have
  *         been compromised.
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_destroy_key(mbedtls_svc_key_id_t key);
 
 /**@}*/
 
 /** \defgroup import_export Key import and export
  * @{
  */
 
 /**
  * \brief Import a key in binary format.
  *
  * This function supports any output from psa_export_key(). Refer to the
  * documentation of psa_export_public_key() for the format of public keys
  * and to the documentation of psa_export_key() for the format for
  * other key types.
  *
  * The key data determines the key size. The attributes may optionally
  * specify a key size; in this case it must match the size determined
  * from the key data. A key size of 0 in \p attributes indicates that
  * the key size is solely determined by the key data.
  *
  * Implementations must reject an attempt to import a key of size 0.
  *
  * This specification supports a single format for each key type.
  * Implementations may support other formats as long as the standard
  * format is supported. Implementations that support other formats
  * should ensure that the formats are clearly unambiguous so as to
  * minimize the risk that an invalid input is accidentally interpreted
  * according to a different format.
  *
  * \param[in] attributes    The attributes for the new key.
  *                          The key size is always determined from the
  *                          \p data buffer.
  *                          If the key size in \p attributes is nonzero,
  *                          it must be equal to the size from \p data.
  * \param[out] key          On success, an identifier to the newly created key.
  *                          For persistent keys, this is the key identifier
  *                          defined in \p attributes.
  *                          \c 0 on failure.
  * \param[in] data    Buffer containing the key data. The content of this
  *                    buffer is interpreted according to the type declared
  *                    in \p attributes.
  *                    All implementations must support at least the format
  *                    described in the documentation
  *                    of psa_export_key() or psa_export_public_key() for
  *                    the chosen type. Implementations may allow other
  *                    formats, but should be conservative: implementations
  *                    should err on the side of rejecting content if it
  *                    may be erroneous (e.g. wrong type or truncated data).
  * \param data_length Size of the \p data buffer in bytes.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  *         If the key is persistent, the key material and the key's metadata
  *         have been saved to persistent storage.
  * \retval #PSA_ERROR_ALREADY_EXISTS
  *         This is an attempt to create a persistent key, and there is
  *         already a persistent key with the given identifier.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         The key type or key size is not supported, either by the
  *         implementation in general or in this particular persistent location.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The key attributes, as a whole, are invalid, or
  *         the key data is not correctly formatted, or
  *         the size in \p attributes is nonzero and does not match the size
  *         of the key data.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_import_key(const psa_key_attributes_t *attributes,
                             const uint8_t *data,
                             size_t data_length,
                             mbedtls_svc_key_id_t *key);
 
 
 
 /**
  * \brief Export a key in binary format.
  *
  * The output of this function can be passed to psa_import_key() to
  * create an equivalent object.
  *
  * If the implementation of psa_import_key() supports other formats
  * beyond the format specified here, the output from psa_export_key()
  * must use the representation specified here, not the original
  * representation.
  *
  * For standard key types, the output format is as follows:
  *
  * - For symmetric keys (including MAC keys), the format is the
  *   raw bytes of the key.
  * - For DES, the key data consists of 8 bytes. The parity bits must be
  *   correct.
  * - For Triple-DES, the format is the concatenation of the
  *   two or three DES keys.
  * - For RSA key pairs (#PSA_KEY_TYPE_RSA_KEY_PAIR), the format
  *   is the non-encrypted DER encoding of the representation defined by
  *   PKCS\#1 (RFC 8017) as `RSAPrivateKey`, version 0.
  *   ```
  *   RSAPrivateKey ::= SEQUENCE {
  *       version             INTEGER,  -- must be 0
  *       modulus             INTEGER,  -- n
  *       publicExponent      INTEGER,  -- e
  *       privateExponent     INTEGER,  -- d
  *       prime1              INTEGER,  -- p
  *       prime2              INTEGER,  -- q
  *       exponent1           INTEGER,  -- d mod (p-1)
  *       exponent2           INTEGER,  -- d mod (q-1)
  *       coefficient         INTEGER,  -- (inverse of q) mod p
  *   }
  *   ```
  * - For elliptic curve key pairs (key types for which
  *   #PSA_KEY_TYPE_IS_ECC_KEY_PAIR is true), the format is
  *   a representation of the private value as a `ceiling(m/8)`-byte string
  *   where `m` is the bit size associated with the curve, i.e. the bit size
  *   of the order of the curve's coordinate field. This byte string is
  *   in little-endian order for Montgomery curves (curve types
  *   `PSA_ECC_FAMILY_CURVEXXX`), and in big-endian order for Weierstrass
  *   curves (curve types `PSA_ECC_FAMILY_SECTXXX`, `PSA_ECC_FAMILY_SECPXXX`
  *   and `PSA_ECC_FAMILY_BRAINPOOL_PXXX`).
  *   For Weierstrass curves, this is the content of the `privateKey` field of
  *   the `ECPrivateKey` format defined by RFC 5915.  For Montgomery curves,
  *   the format is defined by RFC 7748, and output is masked according to §5.
  *   For twisted Edwards curves, the private key is as defined by RFC 8032
  *   (a 32-byte string for Edwards25519, a 57-byte string for Edwards448).
  * - For Diffie-Hellman key exchange key pairs (key types for which
  *   #PSA_KEY_TYPE_IS_DH_KEY_PAIR is true), the
  *   format is the representation of the private key `x` as a big-endian byte
  *   string. The length of the byte string is the private key size in bytes
  *   (leading zeroes are not stripped).
  * - For public keys (key types for which #PSA_KEY_TYPE_IS_PUBLIC_KEY is
  *   true), the format is the same as for psa_export_public_key().
  *
  * The policy on the key must have the usage flag #PSA_KEY_USAGE_EXPORT set.
  *
  * \param key               Identifier of the key to export. It must allow the
  *                          usage #PSA_KEY_USAGE_EXPORT, unless it is a public
  *                          key.
  * \param[out] data         Buffer where the key data is to be written.
  * \param data_size         Size of the \p data buffer in bytes.
  * \param[out] data_length  On success, the number of bytes
  *                          that make up the key data.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The key does not have the #PSA_KEY_USAGE_EXPORT flag.
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p data buffer is too small. You can determine a
  *         sufficient buffer size by calling
  *         #PSA_EXPORT_KEY_OUTPUT_SIZE(\c type, \c bits)
  *         where \c type is the key type
  *         and \c bits is the key size in bits.
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_export_key(mbedtls_svc_key_id_t key,
                             uint8_t *data,
                             size_t data_size,
                             size_t *data_length);
 
 /**
  * \brief Export a public key or the public part of a key pair in binary format.
  *
  * The output of this function can be passed to psa_import_key() to
  * create an object that is equivalent to the public key.
  *
  * This specification supports a single format for each key type.
  * Implementations may support other formats as long as the standard
  * format is supported. Implementations that support other formats
  * should ensure that the formats are clearly unambiguous so as to
  * minimize the risk that an invalid input is accidentally interpreted
  * according to a different format.
  *
  * For standard key types, the output format is as follows:
  * - For RSA public keys (#PSA_KEY_TYPE_RSA_PUBLIC_KEY), the DER encoding of
  *   the representation defined by RFC 3279 &sect;2.3.1 as `RSAPublicKey`.
  *   ```
  *   RSAPublicKey ::= SEQUENCE {
  *      modulus            INTEGER,    -- n
  *      publicExponent     INTEGER  }  -- e
  *   ```
  * - For elliptic curve keys on a twisted Edwards curve (key types for which
  *   #PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY is true and #PSA_KEY_TYPE_ECC_GET_FAMILY
  *   returns #PSA_ECC_FAMILY_TWISTED_EDWARDS), the public key is as defined
  *   by RFC 8032
  *   (a 32-byte string for Edwards25519, a 57-byte string for Edwards448).
  * - For other elliptic curve public keys (key types for which
  *   #PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY is true), the format is the uncompressed
  *   representation defined by SEC1 &sect;2.3.3 as the content of an ECPoint.
  *   Let `m` be the bit size associated with the curve, i.e. the bit size of
  *   `q` for a curve over `F_q`. The representation consists of:
  *      - The byte 0x04;
  *      - `x_P` as a `ceiling(m/8)`-byte string, big-endian;
  *      - `y_P` as a `ceiling(m/8)`-byte string, big-endian.
  * - For Diffie-Hellman key exchange public keys (key types for which
  *   #PSA_KEY_TYPE_IS_DH_PUBLIC_KEY is true),
  *   the format is the representation of the public key `y = g^x mod p` as a
  *   big-endian byte string. The length of the byte string is the length of the
  *   base prime `p` in bytes.
  *
  * Exporting a public key object or the public part of a key pair is
  * always permitted, regardless of the key's usage flags.
  *
  * \param key               Identifier of the key to export.
  * \param[out] data         Buffer where the key data is to be written.
  * \param data_size         Size of the \p data buffer in bytes.
  * \param[out] data_length  On success, the number of bytes
  *                          that make up the key data.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The key is neither a public key nor a key pair.
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p data buffer is too small. You can determine a
  *         sufficient buffer size by calling
  *         #PSA_EXPORT_KEY_OUTPUT_SIZE(#PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(\c type), \c bits)
  *         where \c type is the key type
  *         and \c bits is the key size in bits.
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_export_public_key(mbedtls_svc_key_id_t key,
                                    uint8_t *data,
                                    size_t data_size,
                                    size_t *data_length);
 
 
 
 /**@}*/
 
 /** \defgroup hash Message digests
  * @{
  */
 
 /** Calculate the hash (digest) of a message.
  *
  * \note To verify the hash of a message against an
  *       expected value, use psa_hash_compare() instead.
  *
  * \param alg               The hash algorithm to compute (\c PSA_ALG_XXX value
  *                          such that #PSA_ALG_IS_HASH(\p alg) is true).
  * \param[in] input         Buffer containing the message to hash.
  * \param input_length      Size of the \p input buffer in bytes.
  * \param[out] hash         Buffer where the hash is to be written.
  * \param hash_size         Size of the \p hash buffer in bytes.
  * \param[out] hash_length  On success, the number of bytes
  *                          that make up the hash value. This is always
  *                          #PSA_HASH_LENGTH(\p alg).
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a hash algorithm.
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         \p hash_size is too small
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_hash_compute(psa_algorithm_t alg,
                               const uint8_t *input,
                               size_t input_length,
                               uint8_t *hash,
                               size_t hash_size,
                               size_t *hash_length);
 
 /** Calculate the hash (digest) of a message and compare it with a
  * reference value.
  *
  * \param alg               The hash algorithm to compute (\c PSA_ALG_XXX value
  *                          such that #PSA_ALG_IS_HASH(\p alg) is true).
  * \param[in] input         Buffer containing the message to hash.
  * \param input_length      Size of the \p input buffer in bytes.
  * \param[in] hash          Buffer containing the expected hash value.
  * \param hash_length       Size of the \p hash buffer in bytes.
  *
  * \retval #PSA_SUCCESS
  *         The expected hash is identical to the actual hash of the input.
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The hash of the message was calculated successfully, but it
  *         differs from the expected hash.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a hash algorithm.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p input_length or \p hash_length do not match the hash size for \p alg
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_hash_compare(psa_algorithm_t alg,
                               const uint8_t *input,
                               size_t input_length,
                               const uint8_t *hash,
                               size_t hash_length);
 
 /** The type of the state data structure for multipart hash operations.
  *
  * Before calling any function on a hash operation object, the application must
  * initialize it by any of the following means:
  * - Set the structure to all-bits-zero, for example:
  *   \code
  *   psa_hash_operation_t operation;
  *   memset(&operation, 0, sizeof(operation));
  *   \endcode
  * - Initialize the structure to logical zero values, for example:
  *   \code
  *   psa_hash_operation_t operation = {0};
  *   \endcode
  * - Initialize the structure to the initializer #PSA_HASH_OPERATION_INIT,
  *   for example:
  *   \code
  *   psa_hash_operation_t operation = PSA_HASH_OPERATION_INIT;
  *   \endcode
  * - Assign the result of the function psa_hash_operation_init()
  *   to the structure, for example:
  *   \code
  *   psa_hash_operation_t operation;
  *   operation = psa_hash_operation_init();
  *   \endcode
  *
  * This is an implementation-defined \c struct. Applications should not
  * make any assumptions about the content of this structure.
  * Implementation details can change in future versions without notice. */
 typedef struct psa_hash_operation_s psa_hash_operation_t;
 
 /** \def PSA_HASH_OPERATION_INIT
  *
  * This macro returns a suitable initializer for a hash operation object
  * of type #psa_hash_operation_t.
  */
 
 /** Return an initial value for a hash operation object.
  */
 static psa_hash_operation_t psa_hash_operation_init(void);
 
 /** Set up a multipart hash operation.
  *
  * The sequence of operations to calculate a hash (message digest)
  * is as follows:
  * -# Allocate an operation object which will be passed to all the functions
  *    listed here.
  * -# Initialize the operation object with one of the methods described in the
  *    documentation for #psa_hash_operation_t, e.g. #PSA_HASH_OPERATION_INIT.
  * -# Call psa_hash_setup() to specify the algorithm.
  * -# Call psa_hash_update() zero, one or more times, passing a fragment
  *    of the message each time. The hash that is calculated is the hash
  *    of the concatenation of these messages in order.
  * -# To calculate the hash, call psa_hash_finish().
  *    To compare the hash with an expected value, call psa_hash_verify().
  *
  * If an error occurs at any step after a call to psa_hash_setup(), the
  * operation will need to be reset by a call to psa_hash_abort(). The
  * application may call psa_hash_abort() at any time after the operation
  * has been initialized.
  *
  * After a successful call to psa_hash_setup(), the application must
  * eventually terminate the operation. The following events terminate an
  * operation:
  * - A successful call to psa_hash_finish() or psa_hash_verify().
  * - A call to psa_hash_abort().
  *
  * \param[in,out] operation The operation object to set up. It must have
  *                          been initialized as per the documentation for
  *                          #psa_hash_operation_t and not yet in use.
  * \param alg               The hash algorithm to compute (\c PSA_ALG_XXX value
  *                          such that #PSA_ALG_IS_HASH(\p alg) is true).
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not a supported hash algorithm.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p alg is not a hash algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_hash_setup(psa_hash_operation_t *operation,
                             psa_algorithm_t alg);
 
 /** Add a message fragment to a multipart hash operation.
  *
  * The application must call psa_hash_setup() before calling this function.
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_hash_abort().
  *
  * \param[in,out] operation Active hash operation.
  * \param[in] input         Buffer containing the message fragment to hash.
  * \param input_length      Size of the \p input buffer in bytes.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active), or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_hash_update(psa_hash_operation_t *operation,
                              const uint8_t *input,
                              size_t input_length);
 
 /** Finish the calculation of the hash of a message.
  *
  * The application must call psa_hash_setup() before calling this function.
  * This function calculates the hash of the message formed by concatenating
  * the inputs passed to preceding calls to psa_hash_update().
  *
  * When this function returns successfully, the operation becomes inactive.
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_hash_abort().
  *
  * \warning Applications should not call this function if they expect
  *          a specific value for the hash. Call psa_hash_verify() instead.
  *          Beware that comparing integrity or authenticity data such as
  *          hash values with a function such as \c memcmp is risky
  *          because the time taken by the comparison may leak information
  *          about the hashed data which could allow an attacker to guess
  *          a valid hash and thereby bypass security controls.
  *
  * \param[in,out] operation     Active hash operation.
  * \param[out] hash             Buffer where the hash is to be written.
  * \param hash_size             Size of the \p hash buffer in bytes.
  * \param[out] hash_length      On success, the number of bytes
  *                              that make up the hash value. This is always
  *                              #PSA_HASH_LENGTH(\c alg) where \c alg is the
  *                              hash algorithm that is calculated.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p hash buffer is too small. You can determine a
  *         sufficient buffer size by calling #PSA_HASH_LENGTH(\c alg)
  *         where \c alg is the hash algorithm that is calculated.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active), or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_hash_finish(psa_hash_operation_t *operation,
                              uint8_t *hash,
                              size_t hash_size,
                              size_t *hash_length);
 
 /** Finish the calculation of the hash of a message and compare it with
  * an expected value.
  *
  * The application must call psa_hash_setup() before calling this function.
  * This function calculates the hash of the message formed by concatenating
  * the inputs passed to preceding calls to psa_hash_update(). It then
  * compares the calculated hash with the expected hash passed as a
  * parameter to this function.
  *
  * When this function returns successfully, the operation becomes inactive.
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_hash_abort().
  *
  * \note Implementations shall make the best effort to ensure that the
  * comparison between the actual hash and the expected hash is performed
  * in constant time.
  *
  * \param[in,out] operation     Active hash operation.
  * \param[in] hash              Buffer containing the expected hash value.
  * \param hash_length           Size of the \p hash buffer in bytes.
  *
  * \retval #PSA_SUCCESS
  *         The expected hash is identical to the actual hash of the message.
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The hash of the message was calculated successfully, but it
  *         differs from the expected hash.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active), or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_hash_verify(psa_hash_operation_t *operation,
                              const uint8_t *hash,
                              size_t hash_length);
 
 /** Abort a hash operation.
  *
  * Aborting an operation frees all associated resources except for the
  * \p operation structure itself. Once aborted, the operation object
  * can be reused for another operation by calling
  * psa_hash_setup() again.
  *
  * You may call this function any time after the operation object has
  * been initialized by one of the methods described in #psa_hash_operation_t.
  *
  * In particular, calling psa_hash_abort() after the operation has been
  * terminated by a call to psa_hash_abort(), psa_hash_finish() or
  * psa_hash_verify() is safe and has no effect.
  *
  * \param[in,out] operation     Initialized hash operation.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_hash_abort(psa_hash_operation_t *operation);
 
 /** Clone a hash operation.
  *
  * This function copies the state of an ongoing hash operation to
  * a new operation object. In other words, this function is equivalent
  * to calling psa_hash_setup() on \p target_operation with the same
  * algorithm that \p source_operation was set up for, then
  * psa_hash_update() on \p target_operation with the same input that
  * that was passed to \p source_operation. After this function returns, the
  * two objects are independent, i.e. subsequent calls involving one of
  * the objects do not affect the other object.
  *
  * \param[in] source_operation      The active hash operation to clone.
  * \param[in,out] target_operation  The operation object to set up.
  *                                  It must be initialized but not active.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The \p source_operation state is not valid (it must be active), or
  *         the \p target_operation state is not valid (it must be inactive), or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_hash_clone(const psa_hash_operation_t *source_operation,
                             psa_hash_operation_t *target_operation);
 
 /**@}*/
 
 /** \defgroup MAC Message authentication codes
  * @{
  */
 
 /** Calculate the MAC (message authentication code) of a message.
  *
  * \note To verify the MAC of a message against an
  *       expected value, use psa_mac_verify() instead.
  *       Beware that comparing integrity or authenticity data such as
  *       MAC values with a function such as \c memcmp is risky
  *       because the time taken by the comparison may leak information
  *       about the MAC value which could allow an attacker to guess
  *       a valid MAC and thereby bypass security controls.
  *
  * \param key               Identifier of the key to use for the operation. It
  *                          must allow the usage PSA_KEY_USAGE_SIGN_MESSAGE.
  * \param alg               The MAC algorithm to compute (\c PSA_ALG_XXX value
  *                          such that #PSA_ALG_IS_MAC(\p alg) is true).
  * \param[in] input         Buffer containing the input message.
  * \param input_length      Size of the \p input buffer in bytes.
  * \param[out] mac          Buffer where the MAC value is to be written.
  * \param mac_size          Size of the \p mac buffer in bytes.
  * \param[out] mac_length   On success, the number of bytes
  *                          that make up the MAC value.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a MAC algorithm.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         \p mac_size is too small
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE
  *         The key could not be retrieved from storage.
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_mac_compute(mbedtls_svc_key_id_t key,
                              psa_algorithm_t alg,
                              const uint8_t *input,
                              size_t input_length,
                              uint8_t *mac,
                              size_t mac_size,
                              size_t *mac_length);
 
 /** Calculate the MAC of a message and compare it with a reference value.
  *
  * \param key               Identifier of the key to use for the operation. It
  *                          must allow the usage PSA_KEY_USAGE_VERIFY_MESSAGE.
  * \param alg               The MAC algorithm to compute (\c PSA_ALG_XXX value
  *                          such that #PSA_ALG_IS_MAC(\p alg) is true).
  * \param[in] input         Buffer containing the input message.
  * \param input_length      Size of the \p input buffer in bytes.
  * \param[in] mac           Buffer containing the expected MAC value.
  * \param mac_length        Size of the \p mac buffer in bytes.
  *
  * \retval #PSA_SUCCESS
  *         The expected MAC is identical to the actual MAC of the input.
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The MAC of the message was calculated successfully, but it
  *         differs from the expected value.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a MAC algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE
  *         The key could not be retrieved from storage.
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_mac_verify(mbedtls_svc_key_id_t key,
                             psa_algorithm_t alg,
                             const uint8_t *input,
                             size_t input_length,
                             const uint8_t *mac,
                             size_t mac_length);
 
 /** The type of the state data structure for multipart MAC operations.
  *
  * Before calling any function on a MAC operation object, the application must
  * initialize it by any of the following means:
  * - Set the structure to all-bits-zero, for example:
  *   \code
  *   psa_mac_operation_t operation;
  *   memset(&operation, 0, sizeof(operation));
  *   \endcode
  * - Initialize the structure to logical zero values, for example:
  *   \code
  *   psa_mac_operation_t operation = {0};
  *   \endcode
  * - Initialize the structure to the initializer #PSA_MAC_OPERATION_INIT,
  *   for example:
  *   \code
  *   psa_mac_operation_t operation = PSA_MAC_OPERATION_INIT;
  *   \endcode
  * - Assign the result of the function psa_mac_operation_init()
  *   to the structure, for example:
  *   \code
  *   psa_mac_operation_t operation;
  *   operation = psa_mac_operation_init();
  *   \endcode
  *
  *
  * This is an implementation-defined \c struct. Applications should not
  * make any assumptions about the content of this structure.
  * Implementation details can change in future versions without notice. */
 typedef struct psa_mac_operation_s psa_mac_operation_t;
 
 /** \def PSA_MAC_OPERATION_INIT
  *
  * This macro returns a suitable initializer for a MAC operation object of type
  * #psa_mac_operation_t.
  */
 
 /** Return an initial value for a MAC operation object.
  */
 static psa_mac_operation_t psa_mac_operation_init(void);
 
 /** Set up a multipart MAC calculation operation.
  *
  * This function sets up the calculation of the MAC
  * (message authentication code) of a byte string.
  * To verify the MAC of a message against an
  * expected value, use psa_mac_verify_setup() instead.
  *
  * The sequence of operations to calculate a MAC is as follows:
  * -# Allocate an operation object which will be passed to all the functions
  *    listed here.
  * -# Initialize the operation object with one of the methods described in the
  *    documentation for #psa_mac_operation_t, e.g. #PSA_MAC_OPERATION_INIT.
  * -# Call psa_mac_sign_setup() to specify the algorithm and key.
  * -# Call psa_mac_update() zero, one or more times, passing a fragment
  *    of the message each time. The MAC that is calculated is the MAC
  *    of the concatenation of these messages in order.
  * -# At the end of the message, call psa_mac_sign_finish() to finish
  *    calculating the MAC value and retrieve it.
  *
  * If an error occurs at any step after a call to psa_mac_sign_setup(), the
  * operation will need to be reset by a call to psa_mac_abort(). The
  * application may call psa_mac_abort() at any time after the operation
  * has been initialized.
  *
  * After a successful call to psa_mac_sign_setup(), the application must
  * eventually terminate the operation through one of the following methods:
  * - A successful call to psa_mac_sign_finish().
  * - A call to psa_mac_abort().
  *
  * \param[in,out] operation The operation object to set up. It must have
  *                          been initialized as per the documentation for
  *                          #psa_mac_operation_t and not yet in use.
  * \param key               Identifier of the key to use for the operation. It
  *                          must remain valid until the operation terminates.
  *                          It must allow the usage PSA_KEY_USAGE_SIGN_MESSAGE.
  * \param alg               The MAC algorithm to compute (\c PSA_ALG_XXX value
  *                          such that #PSA_ALG_IS_MAC(\p alg) is true).
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a MAC algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE
  *         The key could not be retrieved from storage.
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_mac_sign_setup(psa_mac_operation_t *operation,
                                 mbedtls_svc_key_id_t key,
                                 psa_algorithm_t alg);
 
 /** Set up a multipart MAC verification operation.
  *
  * This function sets up the verification of the MAC
  * (message authentication code) of a byte string against an expected value.
  *
  * The sequence of operations to verify a MAC is as follows:
  * -# Allocate an operation object which will be passed to all the functions
  *    listed here.
  * -# Initialize the operation object with one of the methods described in the
  *    documentation for #psa_mac_operation_t, e.g. #PSA_MAC_OPERATION_INIT.
  * -# Call psa_mac_verify_setup() to specify the algorithm and key.
  * -# Call psa_mac_update() zero, one or more times, passing a fragment
  *    of the message each time. The MAC that is calculated is the MAC
  *    of the concatenation of these messages in order.
  * -# At the end of the message, call psa_mac_verify_finish() to finish
  *    calculating the actual MAC of the message and verify it against
  *    the expected value.
  *
  * If an error occurs at any step after a call to psa_mac_verify_setup(), the
  * operation will need to be reset by a call to psa_mac_abort(). The
  * application may call psa_mac_abort() at any time after the operation
  * has been initialized.
  *
  * After a successful call to psa_mac_verify_setup(), the application must
  * eventually terminate the operation through one of the following methods:
  * - A successful call to psa_mac_verify_finish().
  * - A call to psa_mac_abort().
  *
  * \param[in,out] operation The operation object to set up. It must have
  *                          been initialized as per the documentation for
  *                          #psa_mac_operation_t and not yet in use.
  * \param key               Identifier of the key to use for the operation. It
  *                          must remain valid until the operation terminates.
  *                          It must allow the usage
  *                          PSA_KEY_USAGE_VERIFY_MESSAGE.
  * \param alg               The MAC algorithm to compute (\c PSA_ALG_XXX value
  *                          such that #PSA_ALG_IS_MAC(\p alg) is true).
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \c key is not compatible with \c alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \c alg is not supported or is not a MAC algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE
  *         The key could not be retrieved from storage.
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_mac_verify_setup(psa_mac_operation_t *operation,
                                   mbedtls_svc_key_id_t key,
                                   psa_algorithm_t alg);
 
 /** Add a message fragment to a multipart MAC operation.
  *
  * The application must call psa_mac_sign_setup() or psa_mac_verify_setup()
  * before calling this function.
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_mac_abort().
  *
  * \param[in,out] operation Active MAC operation.
  * \param[in] input         Buffer containing the message fragment to add to
  *                          the MAC calculation.
  * \param input_length      Size of the \p input buffer in bytes.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active), or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_mac_update(psa_mac_operation_t *operation,
                             const uint8_t *input,
                             size_t input_length);
 
 /** Finish the calculation of the MAC of a message.
  *
  * The application must call psa_mac_sign_setup() before calling this function.
  * This function calculates the MAC of the message formed by concatenating
  * the inputs passed to preceding calls to psa_mac_update().
  *
  * When this function returns successfully, the operation becomes inactive.
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_mac_abort().
  *
  * \warning Applications should not call this function if they expect
  *          a specific value for the MAC. Call psa_mac_verify_finish() instead.
  *          Beware that comparing integrity or authenticity data such as
  *          MAC values with a function such as \c memcmp is risky
  *          because the time taken by the comparison may leak information
  *          about the MAC value which could allow an attacker to guess
  *          a valid MAC and thereby bypass security controls.
  *
  * \param[in,out] operation Active MAC operation.
  * \param[out] mac          Buffer where the MAC value is to be written.
  * \param mac_size          Size of the \p mac buffer in bytes.
  * \param[out] mac_length   On success, the number of bytes
  *                          that make up the MAC value. This is always
  *                          #PSA_MAC_LENGTH(\c key_type, \c key_bits, \c alg)
  *                          where \c key_type and \c key_bits are the type and
  *                          bit-size respectively of the key and \c alg is the
  *                          MAC algorithm that is calculated.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p mac buffer is too small. You can determine a
  *         sufficient buffer size by calling PSA_MAC_LENGTH().
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be an active mac sign
  *         operation), or the library has not been previously initialized
  *         by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_mac_sign_finish(psa_mac_operation_t *operation,
                                  uint8_t *mac,
                                  size_t mac_size,
                                  size_t *mac_length);
 
 /** Finish the calculation of the MAC of a message and compare it with
  * an expected value.
  *
  * The application must call psa_mac_verify_setup() before calling this function.
  * This function calculates the MAC of the message formed by concatenating
  * the inputs passed to preceding calls to psa_mac_update(). It then
  * compares the calculated MAC with the expected MAC passed as a
  * parameter to this function.
  *
  * When this function returns successfully, the operation becomes inactive.
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_mac_abort().
  *
  * \note Implementations shall make the best effort to ensure that the
  * comparison between the actual MAC and the expected MAC is performed
  * in constant time.
  *
  * \param[in,out] operation Active MAC operation.
  * \param[in] mac           Buffer containing the expected MAC value.
  * \param mac_length        Size of the \p mac buffer in bytes.
  *
  * \retval #PSA_SUCCESS
  *         The expected MAC is identical to the actual MAC of the message.
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The MAC of the message was calculated successfully, but it
  *         differs from the expected MAC.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be an active mac verify
  *         operation), or the library has not been previously initialized
  *         by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_mac_verify_finish(psa_mac_operation_t *operation,
                                    const uint8_t *mac,
                                    size_t mac_length);
 
 /** Abort a MAC operation.
  *
  * Aborting an operation frees all associated resources except for the
  * \p operation structure itself. Once aborted, the operation object
  * can be reused for another operation by calling
  * psa_mac_sign_setup() or psa_mac_verify_setup() again.
  *
  * You may call this function any time after the operation object has
  * been initialized by one of the methods described in #psa_mac_operation_t.
  *
  * In particular, calling psa_mac_abort() after the operation has been
  * terminated by a call to psa_mac_abort(), psa_mac_sign_finish() or
  * psa_mac_verify_finish() is safe and has no effect.
  *
  * \param[in,out] operation Initialized MAC operation.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_mac_abort(psa_mac_operation_t *operation);
 
 /**@}*/
 
 /** \defgroup cipher Symmetric ciphers
  * @{
  */
 
 /** Encrypt a message using a symmetric cipher.
  *
  * This function encrypts a message with a random IV (initialization
  * vector). Use the multipart operation interface with a
  * #psa_cipher_operation_t object to provide other forms of IV.
  *
  * \param key                   Identifier of the key to use for the operation.
  *                              It must allow the usage #PSA_KEY_USAGE_ENCRYPT.
  * \param alg                   The cipher algorithm to compute
  *                              (\c PSA_ALG_XXX value such that
  *                              #PSA_ALG_IS_CIPHER(\p alg) is true).
  * \param[in] input             Buffer containing the message to encrypt.
  * \param input_length          Size of the \p input buffer in bytes.
  * \param[out] output           Buffer where the output is to be written.
  *                              The output contains the IV followed by
  *                              the ciphertext proper.
  * \param output_size           Size of the \p output buffer in bytes.
  * \param[out] output_length    On success, the number of bytes
  *                              that make up the output.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a cipher algorithm.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_cipher_encrypt(mbedtls_svc_key_id_t key,
                                 psa_algorithm_t alg,
                                 const uint8_t *input,
                                 size_t input_length,
                                 uint8_t *output,
                                 size_t output_size,
                                 size_t *output_length);
 
 /** Decrypt a message using a symmetric cipher.
  *
  * This function decrypts a message encrypted with a symmetric cipher.
  *
  * \param key                   Identifier of the key to use for the operation.
  *                              It must remain valid until the operation
  *                              terminates. It must allow the usage
  *                              #PSA_KEY_USAGE_DECRYPT.
  * \param alg                   The cipher algorithm to compute
  *                              (\c PSA_ALG_XXX value such that
  *                              #PSA_ALG_IS_CIPHER(\p alg) is true).
  * \param[in] input             Buffer containing the message to decrypt.
  *                              This consists of the IV followed by the
  *                              ciphertext proper.
  * \param input_length          Size of the \p input buffer in bytes.
  * \param[out] output           Buffer where the plaintext is to be written.
  * \param output_size           Size of the \p output buffer in bytes.
  * \param[out] output_length    On success, the number of bytes
  *                              that make up the output.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a cipher algorithm.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_cipher_decrypt(mbedtls_svc_key_id_t key,
                                 psa_algorithm_t alg,
                                 const uint8_t *input,
                                 size_t input_length,
                                 uint8_t *output,
                                 size_t output_size,
                                 size_t *output_length);
 
 /** The type of the state data structure for multipart cipher operations.
  *
  * Before calling any function on a cipher operation object, the application
  * must initialize it by any of the following means:
  * - Set the structure to all-bits-zero, for example:
  *   \code
  *   psa_cipher_operation_t operation;
  *   memset(&operation, 0, sizeof(operation));
  *   \endcode
  * - Initialize the structure to logical zero values, for example:
  *   \code
  *   psa_cipher_operation_t operation = {0};
  *   \endcode
  * - Initialize the structure to the initializer #PSA_CIPHER_OPERATION_INIT,
  *   for example:
  *   \code
  *   psa_cipher_operation_t operation = PSA_CIPHER_OPERATION_INIT;
  *   \endcode
  * - Assign the result of the function psa_cipher_operation_init()
  *   to the structure, for example:
  *   \code
  *   psa_cipher_operation_t operation;
  *   operation = psa_cipher_operation_init();
  *   \endcode
  *
  * This is an implementation-defined \c struct. Applications should not
  * make any assumptions about the content of this structure.
  * Implementation details can change in future versions without notice. */
 typedef struct psa_cipher_operation_s psa_cipher_operation_t;
 
 /** \def PSA_CIPHER_OPERATION_INIT
  *
  * This macro returns a suitable initializer for a cipher operation object of
  * type #psa_cipher_operation_t.
  */
 
 /** Return an initial value for a cipher operation object.
  */
 static psa_cipher_operation_t psa_cipher_operation_init(void);
 
 /** Set the key for a multipart symmetric encryption operation.
  *
  * The sequence of operations to encrypt a message with a symmetric cipher
  * is as follows:
  * -# Allocate an operation object which will be passed to all the functions
  *    listed here.
  * -# Initialize the operation object with one of the methods described in the
  *    documentation for #psa_cipher_operation_t, e.g.
  *    #PSA_CIPHER_OPERATION_INIT.
  * -# Call psa_cipher_encrypt_setup() to specify the algorithm and key.
  * -# Call either psa_cipher_generate_iv() or psa_cipher_set_iv() to
  *    generate or set the IV (initialization vector). You should use
  *    psa_cipher_generate_iv() unless the protocol you are implementing
  *    requires a specific IV value.
  * -# Call psa_cipher_update() zero, one or more times, passing a fragment
  *    of the message each time.
  * -# Call psa_cipher_finish().
  *
  * If an error occurs at any step after a call to psa_cipher_encrypt_setup(),
  * the operation will need to be reset by a call to psa_cipher_abort(). The
  * application may call psa_cipher_abort() at any time after the operation
  * has been initialized.
  *
  * After a successful call to psa_cipher_encrypt_setup(), the application must
  * eventually terminate the operation. The following events terminate an
  * operation:
  * - A successful call to psa_cipher_finish().
  * - A call to psa_cipher_abort().
  *
  * \param[in,out] operation     The operation object to set up. It must have
  *                              been initialized as per the documentation for
  *                              #psa_cipher_operation_t and not yet in use.
  * \param key                   Identifier of the key to use for the operation.
  *                              It must remain valid until the operation
  *                              terminates. It must allow the usage
  *                              #PSA_KEY_USAGE_ENCRYPT.
  * \param alg                   The cipher algorithm to compute
  *                              (\c PSA_ALG_XXX value such that
  *                              #PSA_ALG_IS_CIPHER(\p alg) is true).
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a cipher algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_cipher_encrypt_setup(psa_cipher_operation_t *operation,
                                       mbedtls_svc_key_id_t key,
                                       psa_algorithm_t alg);
 
 /** Set the key for a multipart symmetric decryption operation.
  *
  * The sequence of operations to decrypt a message with a symmetric cipher
  * is as follows:
  * -# Allocate an operation object which will be passed to all the functions
  *    listed here.
  * -# Initialize the operation object with one of the methods described in the
  *    documentation for #psa_cipher_operation_t, e.g.
  *    #PSA_CIPHER_OPERATION_INIT.
  * -# Call psa_cipher_decrypt_setup() to specify the algorithm and key.
  * -# Call psa_cipher_set_iv() with the IV (initialization vector) for the
  *    decryption. If the IV is prepended to the ciphertext, you can call
  *    psa_cipher_update() on a buffer containing the IV followed by the
  *    beginning of the message.
  * -# Call psa_cipher_update() zero, one or more times, passing a fragment
  *    of the message each time.
  * -# Call psa_cipher_finish().
  *
  * If an error occurs at any step after a call to psa_cipher_decrypt_setup(),
  * the operation will need to be reset by a call to psa_cipher_abort(). The
  * application may call psa_cipher_abort() at any time after the operation
  * has been initialized.
  *
  * After a successful call to psa_cipher_decrypt_setup(), the application must
  * eventually terminate the operation. The following events terminate an
  * operation:
  * - A successful call to psa_cipher_finish().
  * - A call to psa_cipher_abort().
  *
  * \param[in,out] operation     The operation object to set up. It must have
  *                              been initialized as per the documentation for
  *                              #psa_cipher_operation_t and not yet in use.
  * \param key                   Identifier of the key to use for the operation.
  *                              It must remain valid until the operation
  *                              terminates. It must allow the usage
  *                              #PSA_KEY_USAGE_DECRYPT.
  * \param alg                   The cipher algorithm to compute
  *                              (\c PSA_ALG_XXX value such that
  *                              #PSA_ALG_IS_CIPHER(\p alg) is true).
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not a cipher algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_cipher_decrypt_setup(psa_cipher_operation_t *operation,
                                       mbedtls_svc_key_id_t key,
                                       psa_algorithm_t alg);
 
 /** Generate an IV for a symmetric encryption operation.
  *
  * This function generates a random IV (initialization vector), nonce
  * or initial counter value for the encryption operation as appropriate
  * for the chosen algorithm, key type and key size.
  *
  * The application must call psa_cipher_encrypt_setup() before
  * calling this function.
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_cipher_abort().
  *
  * \param[in,out] operation     Active cipher operation.
  * \param[out] iv               Buffer where the generated IV is to be written.
  * \param iv_size               Size of the \p iv buffer in bytes.
  * \param[out] iv_length        On success, the number of bytes of the
  *                              generated IV.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p iv buffer is too small.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, with no IV set),
  *         or the library has not been previously initialized
  *         by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_cipher_generate_iv(psa_cipher_operation_t *operation,
                                     uint8_t *iv,
                                     size_t iv_size,
                                     size_t *iv_length);
 
 /** Set the IV for a symmetric encryption or decryption operation.
  *
  * This function sets the IV (initialization vector), nonce
  * or initial counter value for the encryption or decryption operation.
  *
  * The application must call psa_cipher_encrypt_setup() before
  * calling this function.
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_cipher_abort().
  *
  * \note When encrypting, applications should use psa_cipher_generate_iv()
  * instead of this function, unless implementing a protocol that requires
  * a non-random IV.
  *
  * \param[in,out] operation     Active cipher operation.
  * \param[in] iv                Buffer containing the IV to use.
  * \param iv_length             Size of the IV in bytes.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The size of \p iv is not acceptable for the chosen algorithm,
  *         or the chosen algorithm does not use an IV.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be an active cipher
  *         encrypt operation, with no IV set), or the library has not been
  *         previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_cipher_set_iv(psa_cipher_operation_t *operation,
                                const uint8_t *iv,
                                size_t iv_length);
 
 /** Encrypt or decrypt a message fragment in an active cipher operation.
  *
  * Before calling this function, you must:
  * 1. Call either psa_cipher_encrypt_setup() or psa_cipher_decrypt_setup().
  *    The choice of setup function determines whether this function
  *    encrypts or decrypts its input.
  * 2. If the algorithm requires an IV, call psa_cipher_generate_iv()
  *    (recommended when encrypting) or psa_cipher_set_iv().
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_cipher_abort().
  *
  * \param[in,out] operation     Active cipher operation.
  * \param[in] input             Buffer containing the message fragment to
  *                              encrypt or decrypt.
  * \param input_length          Size of the \p input buffer in bytes.
  * \param[out] output           Buffer where the output is to be written.
  * \param output_size           Size of the \p output buffer in bytes.
  * \param[out] output_length    On success, the number of bytes
  *                              that make up the returned output.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p output buffer is too small.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, with an IV set
  *         if required for the algorithm), or the library has not been
  *         previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_cipher_update(psa_cipher_operation_t *operation,
                                const uint8_t *input,
                                size_t input_length,
                                uint8_t *output,
                                size_t output_size,
                                size_t *output_length);
 
 /** Finish encrypting or decrypting a message in a cipher operation.
  *
  * The application must call psa_cipher_encrypt_setup() or
  * psa_cipher_decrypt_setup() before calling this function. The choice
  * of setup function determines whether this function encrypts or
  * decrypts its input.
  *
  * This function finishes the encryption or decryption of the message
  * formed by concatenating the inputs passed to preceding calls to
  * psa_cipher_update().
  *
  * When this function returns successfully, the operation becomes inactive.
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_cipher_abort().
  *
  * \param[in,out] operation     Active cipher operation.
  * \param[out] output           Buffer where the output is to be written.
  * \param output_size           Size of the \p output buffer in bytes.
  * \param[out] output_length    On success, the number of bytes
  *                              that make up the returned output.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The total input size passed to this operation is not valid for
  *         this particular algorithm. For example, the algorithm is a based
  *         on block cipher and requires a whole number of blocks, but the
  *         total input size is not a multiple of the block size.
  * \retval #PSA_ERROR_INVALID_PADDING
  *         This is a decryption operation for an algorithm that includes
  *         padding, and the ciphertext does not contain valid padding.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p output buffer is too small.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, with an IV set
  *         if required for the algorithm), or the library has not been
  *         previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_cipher_finish(psa_cipher_operation_t *operation,
                                uint8_t *output,
                                size_t output_size,
                                size_t *output_length);
 
 /** Abort a cipher operation.
  *
  * Aborting an operation frees all associated resources except for the
  * \p operation structure itself. Once aborted, the operation object
  * can be reused for another operation by calling
  * psa_cipher_encrypt_setup() or psa_cipher_decrypt_setup() again.
  *
  * You may call this function any time after the operation object has
  * been initialized as described in #psa_cipher_operation_t.
  *
  * In particular, calling psa_cipher_abort() after the operation has been
  * terminated by a call to psa_cipher_abort() or psa_cipher_finish()
  * is safe and has no effect.
  *
  * \param[in,out] operation     Initialized cipher operation.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_cipher_abort(psa_cipher_operation_t *operation);
 
 /**@}*/
 
 /** \defgroup aead Authenticated encryption with associated data (AEAD)
  * @{
  */
 
 /** Process an authenticated encryption operation.
  *
  * \param key                     Identifier of the key to use for the
  *                                operation. It must allow the usage
  *                                #PSA_KEY_USAGE_ENCRYPT.
  * \param alg                     The AEAD algorithm to compute
  *                                (\c PSA_ALG_XXX value such that
  *                                #PSA_ALG_IS_AEAD(\p alg) is true).
  * \param[in] nonce               Nonce or IV to use.
  * \param nonce_length            Size of the \p nonce buffer in bytes.
  * \param[in] additional_data     Additional data that will be authenticated
  *                                but not encrypted.
  * \param additional_data_length  Size of \p additional_data in bytes.
  * \param[in] plaintext           Data that will be authenticated and
  *                                encrypted.
  * \param plaintext_length        Size of \p plaintext in bytes.
  * \param[out] ciphertext         Output buffer for the authenticated and
  *                                encrypted data. The additional data is not
  *                                part of this output. For algorithms where the
  *                                encrypted data and the authentication tag
  *                                are defined as separate outputs, the
  *                                authentication tag is appended to the
  *                                encrypted data.
  * \param ciphertext_size         Size of the \p ciphertext buffer in bytes.
  *                                This must be appropriate for the selected
  *                                algorithm and key:
  *                                - A sufficient output size is
  *                                  #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(\c key_type,
  *                                  \p alg, \p plaintext_length) where
  *                                  \c key_type is the type of \p key.
  *                                - #PSA_AEAD_ENCRYPT_OUTPUT_MAX_SIZE(\p
  *                                  plaintext_length) evaluates to the maximum
  *                                  ciphertext size of any supported AEAD
  *                                  encryption.
  * \param[out] ciphertext_length  On success, the size of the output
  *                                in the \p ciphertext buffer.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not an AEAD algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         \p ciphertext_size is too small.
  *         #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(\c key_type, \p alg,
  *         \p plaintext_length) or
  *         #PSA_AEAD_ENCRYPT_OUTPUT_MAX_SIZE(\p plaintext_length) can be used to
  *         determine the required buffer size.
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_aead_encrypt(mbedtls_svc_key_id_t key,
                               psa_algorithm_t alg,
                               const uint8_t *nonce,
                               size_t nonce_length,
                               const uint8_t *additional_data,
                               size_t additional_data_length,
                               const uint8_t *plaintext,
                               size_t plaintext_length,
                               uint8_t *ciphertext,
                               size_t ciphertext_size,
                               size_t *ciphertext_length);
 
 /** Process an authenticated decryption operation.
  *
  * \param key                     Identifier of the key to use for the
  *                                operation. It must allow the usage
  *                                #PSA_KEY_USAGE_DECRYPT.
  * \param alg                     The AEAD algorithm to compute
  *                                (\c PSA_ALG_XXX value such that
  *                                #PSA_ALG_IS_AEAD(\p alg) is true).
  * \param[in] nonce               Nonce or IV to use.
  * \param nonce_length            Size of the \p nonce buffer in bytes.
  * \param[in] additional_data     Additional data that has been authenticated
  *                                but not encrypted.
  * \param additional_data_length  Size of \p additional_data in bytes.
  * \param[in] ciphertext          Data that has been authenticated and
  *                                encrypted. For algorithms where the
  *                                encrypted data and the authentication tag
  *                                are defined as separate inputs, the buffer
  *                                must contain the encrypted data followed
  *                                by the authentication tag.
  * \param ciphertext_length       Size of \p ciphertext in bytes.
  * \param[out] plaintext          Output buffer for the decrypted data.
  * \param plaintext_size          Size of the \p plaintext buffer in bytes.
  *                                This must be appropriate for the selected
  *                                algorithm and key:
  *                                - A sufficient output size is
  *                                  #PSA_AEAD_DECRYPT_OUTPUT_SIZE(\c key_type,
  *                                  \p alg, \p ciphertext_length) where
  *                                  \c key_type is the type of \p key.
  *                                - #PSA_AEAD_DECRYPT_OUTPUT_MAX_SIZE(\p
  *                                  ciphertext_length) evaluates to the maximum
  *                                  plaintext size of any supported AEAD
  *                                  decryption.
  * \param[out] plaintext_length   On success, the size of the output
  *                                in the \p plaintext buffer.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The ciphertext is not authentic.
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not an AEAD algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         \p plaintext_size is too small.
  *         #PSA_AEAD_DECRYPT_OUTPUT_SIZE(\c key_type, \p alg,
  *         \p ciphertext_length) or
  *         #PSA_AEAD_DECRYPT_OUTPUT_MAX_SIZE(\p ciphertext_length) can be used
  *         to determine the required buffer size.
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_aead_decrypt(mbedtls_svc_key_id_t key,
                               psa_algorithm_t alg,
                               const uint8_t *nonce,
                               size_t nonce_length,
                               const uint8_t *additional_data,
                               size_t additional_data_length,
                               const uint8_t *ciphertext,
                               size_t ciphertext_length,
                               uint8_t *plaintext,
                               size_t plaintext_size,
                               size_t *plaintext_length);
 
 /** The type of the state data structure for multipart AEAD operations.
  *
  * Before calling any function on an AEAD operation object, the application
  * must initialize it by any of the following means:
  * - Set the structure to all-bits-zero, for example:
  *   \code
  *   psa_aead_operation_t operation;
  *   memset(&operation, 0, sizeof(operation));
  *   \endcode
  * - Initialize the structure to logical zero values, for example:
  *   \code
  *   psa_aead_operation_t operation = {0};
  *   \endcode
  * - Initialize the structure to the initializer #PSA_AEAD_OPERATION_INIT,
  *   for example:
  *   \code
  *   psa_aead_operation_t operation = PSA_AEAD_OPERATION_INIT;
  *   \endcode
  * - Assign the result of the function psa_aead_operation_init()
  *   to the structure, for example:
  *   \code
  *   psa_aead_operation_t operation;
  *   operation = psa_aead_operation_init();
  *   \endcode
  *
  * This is an implementation-defined \c struct. Applications should not
  * make any assumptions about the content of this structure.
  * Implementation details can change in future versions without notice. */
 typedef struct psa_aead_operation_s psa_aead_operation_t;
 
 /** \def PSA_AEAD_OPERATION_INIT
  *
  * This macro returns a suitable initializer for an AEAD operation object of
  * type #psa_aead_operation_t.
  */
 
 /** Return an initial value for an AEAD operation object.
  */
 static psa_aead_operation_t psa_aead_operation_init(void);
 
 /** Set the key for a multipart authenticated encryption operation.
  *
  * The sequence of operations to encrypt a message with authentication
  * is as follows:
  * -# Allocate an operation object which will be passed to all the functions
  *    listed here.
  * -# Initialize the operation object with one of the methods described in the
  *    documentation for #psa_aead_operation_t, e.g.
  *    #PSA_AEAD_OPERATION_INIT.
  * -# Call psa_aead_encrypt_setup() to specify the algorithm and key.
  * -# If needed, call psa_aead_set_lengths() to specify the length of the
  *    inputs to the subsequent calls to psa_aead_update_ad() and
  *    psa_aead_update(). See the documentation of psa_aead_set_lengths()
  *    for details.
  * -# Call either psa_aead_generate_nonce() or psa_aead_set_nonce() to
  *    generate or set the nonce. You should use
  *    psa_aead_generate_nonce() unless the protocol you are implementing
  *    requires a specific nonce value.
  * -# Call psa_aead_update_ad() zero, one or more times, passing a fragment
  *    of the non-encrypted additional authenticated data each time.
  * -# Call psa_aead_update() zero, one or more times, passing a fragment
  *    of the message to encrypt each time.
  * -# Call psa_aead_finish().
  *
  * If an error occurs at any step after a call to psa_aead_encrypt_setup(),
  * the operation will need to be reset by a call to psa_aead_abort(). The
  * application may call psa_aead_abort() at any time after the operation
  * has been initialized.
  *
  * After a successful call to psa_aead_encrypt_setup(), the application must
  * eventually terminate the operation. The following events terminate an
  * operation:
  * - A successful call to psa_aead_finish().
  * - A call to psa_aead_abort().
  *
  * \param[in,out] operation     The operation object to set up. It must have
  *                              been initialized as per the documentation for
  *                              #psa_aead_operation_t and not yet in use.
  * \param key                   Identifier of the key to use for the operation.
  *                              It must remain valid until the operation
  *                              terminates. It must allow the usage
  *                              #PSA_KEY_USAGE_ENCRYPT.
  * \param alg                   The AEAD algorithm to compute
  *                              (\c PSA_ALG_XXX value such that
  *                              #PSA_ALG_IS_AEAD(\p alg) is true).
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or
  *         the library has not been previously initialized by psa_crypto_init().
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not an AEAD algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_aead_encrypt_setup(psa_aead_operation_t *operation,
                                     mbedtls_svc_key_id_t key,
                                     psa_algorithm_t alg);
 
 /** Set the key for a multipart authenticated decryption operation.
  *
  * The sequence of operations to decrypt a message with authentication
  * is as follows:
  * -# Allocate an operation object which will be passed to all the functions
  *    listed here.
  * -# Initialize the operation object with one of the methods described in the
  *    documentation for #psa_aead_operation_t, e.g.
  *    #PSA_AEAD_OPERATION_INIT.
  * -# Call psa_aead_decrypt_setup() to specify the algorithm and key.
  * -# If needed, call psa_aead_set_lengths() to specify the length of the
  *    inputs to the subsequent calls to psa_aead_update_ad() and
  *    psa_aead_update(). See the documentation of psa_aead_set_lengths()
  *    for details.
  * -# Call psa_aead_set_nonce() with the nonce for the decryption.
  * -# Call psa_aead_update_ad() zero, one or more times, passing a fragment
  *    of the non-encrypted additional authenticated data each time.
  * -# Call psa_aead_update() zero, one or more times, passing a fragment
  *    of the ciphertext to decrypt each time.
  * -# Call psa_aead_verify().
  *
  * If an error occurs at any step after a call to psa_aead_decrypt_setup(),
  * the operation will need to be reset by a call to psa_aead_abort(). The
  * application may call psa_aead_abort() at any time after the operation
  * has been initialized.
  *
  * After a successful call to psa_aead_decrypt_setup(), the application must
  * eventually terminate the operation. The following events terminate an
  * operation:
  * - A successful call to psa_aead_verify().
  * - A call to psa_aead_abort().
  *
  * \param[in,out] operation     The operation object to set up. It must have
  *                              been initialized as per the documentation for
  *                              #psa_aead_operation_t and not yet in use.
  * \param key                   Identifier of the key to use for the operation.
  *                              It must remain valid until the operation
  *                              terminates. It must allow the usage
  *                              #PSA_KEY_USAGE_DECRYPT.
  * \param alg                   The AEAD algorithm to compute
  *                              (\c PSA_ALG_XXX value such that
  *                              #PSA_ALG_IS_AEAD(\p alg) is true).
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p key is not compatible with \p alg.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not supported or is not an AEAD algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or the
  *         library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_aead_decrypt_setup(psa_aead_operation_t *operation,
                                     mbedtls_svc_key_id_t key,
                                     psa_algorithm_t alg);
 
 /** Generate a random nonce for an authenticated encryption operation.
  *
  * This function generates a random nonce for the authenticated encryption
  * operation with an appropriate size for the chosen algorithm, key type
  * and key size.
  *
  * The application must call psa_aead_encrypt_setup() before
  * calling this function.
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_aead_abort().
  *
  * \param[in,out] operation     Active AEAD operation.
  * \param[out] nonce            Buffer where the generated nonce is to be
  *                              written.
  * \param nonce_size            Size of the \p nonce buffer in bytes.
  * \param[out] nonce_length     On success, the number of bytes of the
  *                              generated nonce.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p nonce buffer is too small.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be an active aead encrypt
  *         operation, with no nonce set), or the library has not been
  *         previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_aead_generate_nonce(psa_aead_operation_t *operation,
                                      uint8_t *nonce,
                                      size_t nonce_size,
                                      size_t *nonce_length);
 
 /** Set the nonce for an authenticated encryption or decryption operation.
  *
  * This function sets the nonce for the authenticated
  * encryption or decryption operation.
  *
  * The application must call psa_aead_encrypt_setup() or
  * psa_aead_decrypt_setup() before calling this function.
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_aead_abort().
  *
  * \note When encrypting, applications should use psa_aead_generate_nonce()
  * instead of this function, unless implementing a protocol that requires
  * a non-random IV.
  *
  * \param[in,out] operation     Active AEAD operation.
  * \param[in] nonce             Buffer containing the nonce to use.
  * \param nonce_length          Size of the nonce in bytes.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The size of \p nonce is not acceptable for the chosen algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, with no nonce
  *         set), or the library has not been previously initialized
  *         by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_aead_set_nonce(psa_aead_operation_t *operation,
                                 const uint8_t *nonce,
                                 size_t nonce_length);
 
 /** Declare the lengths of the message and additional data for AEAD.
  *
  * The application must call this function before calling
  * psa_aead_update_ad() or psa_aead_update() if the algorithm for
  * the operation requires it. If the algorithm does not require it,
  * calling this function is optional, but if this function is called
  * then the implementation must enforce the lengths.
  *
  * You may call this function before or after setting the nonce with
  * psa_aead_set_nonce() or psa_aead_generate_nonce().
  *
  * - For #PSA_ALG_CCM, calling this function is required.
  * - For the other AEAD algorithms defined in this specification, calling
  *   this function is not required.
  * - For vendor-defined algorithm, refer to the vendor documentation.
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_aead_abort().
  *
  * \param[in,out] operation     Active AEAD operation.
  * \param ad_length             Size of the non-encrypted additional
  *                              authenticated data in bytes.
  * \param plaintext_length      Size of the plaintext to encrypt in bytes.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         At least one of the lengths is not acceptable for the chosen
  *         algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, and
  *         psa_aead_update_ad() and psa_aead_update() must not have been
  *         called yet), or the library has not been previously initialized
  *         by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_aead_set_lengths(psa_aead_operation_t *operation,
                                   size_t ad_length,
                                   size_t plaintext_length);
 
 /** Pass additional data to an active AEAD operation.
  *
  * Additional data is authenticated, but not encrypted.
  *
  * You may call this function multiple times to pass successive fragments
  * of the additional data. You may not call this function after passing
  * data to encrypt or decrypt with psa_aead_update().
  *
  * Before calling this function, you must:
  * 1. Call either psa_aead_encrypt_setup() or psa_aead_decrypt_setup().
  * 2. Set the nonce with psa_aead_generate_nonce() or psa_aead_set_nonce().
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_aead_abort().
  *
  * \warning When decrypting, until psa_aead_verify() has returned #PSA_SUCCESS,
  *          there is no guarantee that the input is valid. Therefore, until
  *          you have called psa_aead_verify() and it has returned #PSA_SUCCESS,
  *          treat the input as untrusted and prepare to undo any action that
  *          depends on the input if psa_aead_verify() returns an error status.
  *
  * \param[in,out] operation     Active AEAD operation.
  * \param[in] input             Buffer containing the fragment of
  *                              additional data.
  * \param input_length          Size of the \p input buffer in bytes.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The total input length overflows the additional data length that
  *         was previously specified with psa_aead_set_lengths().
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, have a nonce
  *         set, have lengths set if required by the algorithm, and
  *         psa_aead_update() must not have been called yet), or the library
  *         has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_aead_update_ad(psa_aead_operation_t *operation,
                                 const uint8_t *input,
                                 size_t input_length);
 
 /** Encrypt or decrypt a message fragment in an active AEAD operation.
  *
  * Before calling this function, you must:
  * 1. Call either psa_aead_encrypt_setup() or psa_aead_decrypt_setup().
  *    The choice of setup function determines whether this function
  *    encrypts or decrypts its input.
  * 2. Set the nonce with psa_aead_generate_nonce() or psa_aead_set_nonce().
  * 3. Call psa_aead_update_ad() to pass all the additional data.
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_aead_abort().
  *
  * \warning When decrypting, until psa_aead_verify() has returned #PSA_SUCCESS,
  *          there is no guarantee that the input is valid. Therefore, until
  *          you have called psa_aead_verify() and it has returned #PSA_SUCCESS:
  *          - Do not use the output in any way other than storing it in a
  *            confidential location. If you take any action that depends
  *            on the tentative decrypted data, this action will need to be
  *            undone if the input turns out not to be valid. Furthermore,
  *            if an adversary can observe that this action took place
  *            (for example through timing), they may be able to use this
  *            fact as an oracle to decrypt any message encrypted with the
  *            same key.
  *          - In particular, do not copy the output anywhere but to a
  *            memory or storage space that you have exclusive access to.
  *
  * This function does not require the input to be aligned to any
  * particular block boundary. If the implementation can only process
  * a whole block at a time, it must consume all the input provided, but
  * it may delay the end of the corresponding output until a subsequent
  * call to psa_aead_update(), psa_aead_finish() or psa_aead_verify()
  * provides sufficient input. The amount of data that can be delayed
  * in this way is bounded by #PSA_AEAD_UPDATE_OUTPUT_SIZE.
  *
  * \param[in,out] operation     Active AEAD operation.
  * \param[in] input             Buffer containing the message fragment to
  *                              encrypt or decrypt.
  * \param input_length          Size of the \p input buffer in bytes.
  * \param[out] output           Buffer where the output is to be written.
  * \param output_size           Size of the \p output buffer in bytes.
  *                              This must be appropriate for the selected
  *                                algorithm and key:
  *                                - A sufficient output size is
  *                                  #PSA_AEAD_UPDATE_OUTPUT_SIZE(\c key_type,
  *                                  \c alg, \p input_length) where
  *                                  \c key_type is the type of key and \c alg is
  *                                  the algorithm that were used to set up the
  *                                  operation.
  *                                - #PSA_AEAD_UPDATE_OUTPUT_MAX_SIZE(\p
  *                                  input_length) evaluates to the maximum
  *                                  output size of any supported AEAD
  *                                  algorithm.
  * \param[out] output_length    On success, the number of bytes
  *                              that make up the returned output.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p output buffer is too small.
  *         #PSA_AEAD_UPDATE_OUTPUT_SIZE(\c key_type, \c alg, \p input_length) or
  *         #PSA_AEAD_UPDATE_OUTPUT_MAX_SIZE(\p input_length) can be used to
  *         determine the required buffer size.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The total length of input to psa_aead_update_ad() so far is
  *         less than the additional data length that was previously
  *         specified with psa_aead_set_lengths(), or
  *         the total input length overflows the plaintext length that
  *         was previously specified with psa_aead_set_lengths().
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active, have a nonce
  *         set, and have lengths set if required by the algorithm), or the
  *         library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_aead_update(psa_aead_operation_t *operation,
                              const uint8_t *input,
                              size_t input_length,
                              uint8_t *output,
                              size_t output_size,
                              size_t *output_length);
 
 /** Finish encrypting a message in an AEAD operation.
  *
  * The operation must have been set up with psa_aead_encrypt_setup().
  *
  * This function finishes the authentication of the additional data
  * formed by concatenating the inputs passed to preceding calls to
  * psa_aead_update_ad() with the plaintext formed by concatenating the
  * inputs passed to preceding calls to psa_aead_update().
  *
  * This function has two output buffers:
  * - \p ciphertext contains trailing ciphertext that was buffered from
  *   preceding calls to psa_aead_update().
  * - \p tag contains the authentication tag.
  *
  * When this function returns successfully, the operation becomes inactive.
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_aead_abort().
  *
  * \param[in,out] operation     Active AEAD operation.
  * \param[out] ciphertext       Buffer where the last part of the ciphertext
  *                              is to be written.
  * \param ciphertext_size       Size of the \p ciphertext buffer in bytes.
  *                              This must be appropriate for the selected
  *                              algorithm and key:
  *                              - A sufficient output size is
  *                                #PSA_AEAD_FINISH_OUTPUT_SIZE(\c key_type,
  *                                \c alg) where \c key_type is the type of key
  *                                and \c alg is the algorithm that were used to
  *                                set up the operation.
  *                              - #PSA_AEAD_FINISH_OUTPUT_MAX_SIZE evaluates to
  *                                the maximum output size of any supported AEAD
  *                                algorithm.
  * \param[out] ciphertext_length On success, the number of bytes of
  *                              returned ciphertext.
  * \param[out] tag              Buffer where the authentication tag is
  *                              to be written.
  * \param tag_size              Size of the \p tag buffer in bytes.
  *                              This must be appropriate for the selected
  *                              algorithm and key:
  *                              - The exact tag size is #PSA_AEAD_TAG_LENGTH(\c
  *                                key_type, \c key_bits, \c alg) where
  *                                \c key_type and \c key_bits are the type and
  *                                bit-size of the key, and \c alg is the
  *                                algorithm that were used in the call to
  *                                psa_aead_encrypt_setup().
  *                              - #PSA_AEAD_TAG_MAX_SIZE evaluates to the
  *                                maximum tag size of any supported AEAD
  *                                algorithm.
  * \param[out] tag_length       On success, the number of bytes
  *                              that make up the returned tag.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p ciphertext or \p tag buffer is too small.
  *         #PSA_AEAD_FINISH_OUTPUT_SIZE(\c key_type, \c alg) or
  *         #PSA_AEAD_FINISH_OUTPUT_MAX_SIZE can be used to determine the
  *         required \p ciphertext buffer size. #PSA_AEAD_TAG_LENGTH(\c key_type,
  *         \c key_bits, \c alg) or #PSA_AEAD_TAG_MAX_SIZE can be used to
  *         determine the required \p tag buffer size.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The total length of input to psa_aead_update_ad() so far is
  *         less than the additional data length that was previously
  *         specified with psa_aead_set_lengths(), or
  *         the total length of input to psa_aead_update() so far is
  *         less than the plaintext length that was previously
  *         specified with psa_aead_set_lengths().
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be an active encryption
  *         operation with a nonce set), or the library has not been previously
  *         initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_aead_finish(psa_aead_operation_t *operation,
                              uint8_t *ciphertext,
                              size_t ciphertext_size,
                              size_t *ciphertext_length,
                              uint8_t *tag,
                              size_t tag_size,
                              size_t *tag_length);
 
 /** Finish authenticating and decrypting a message in an AEAD operation.
  *
  * The operation must have been set up with psa_aead_decrypt_setup().
  *
  * This function finishes the authenticated decryption of the message
  * components:
  *
  * -  The additional data consisting of the concatenation of the inputs
  *    passed to preceding calls to psa_aead_update_ad().
  * -  The ciphertext consisting of the concatenation of the inputs passed to
  *    preceding calls to psa_aead_update().
  * -  The tag passed to this function call.
  *
  * If the authentication tag is correct, this function outputs any remaining
  * plaintext and reports success. If the authentication tag is not correct,
  * this function returns #PSA_ERROR_INVALID_SIGNATURE.
  *
  * When this function returns successfully, the operation becomes inactive.
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_aead_abort().
  *
  * \note Implementations shall make the best effort to ensure that the
  * comparison between the actual tag and the expected tag is performed
  * in constant time.
  *
  * \param[in,out] operation     Active AEAD operation.
  * \param[out] plaintext        Buffer where the last part of the plaintext
  *                              is to be written. This is the remaining data
  *                              from previous calls to psa_aead_update()
  *                              that could not be processed until the end
  *                              of the input.
  * \param plaintext_size        Size of the \p plaintext buffer in bytes.
  *                              This must be appropriate for the selected algorithm and key:
  *                              - A sufficient output size is
  *                                #PSA_AEAD_VERIFY_OUTPUT_SIZE(\c key_type,
  *                                \c alg) where \c key_type is the type of key
  *                                and \c alg is the algorithm that were used to
  *                                set up the operation.
  *                              - #PSA_AEAD_VERIFY_OUTPUT_MAX_SIZE evaluates to
  *                                the maximum output size of any supported AEAD
  *                                algorithm.
  * \param[out] plaintext_length On success, the number of bytes of
  *                              returned plaintext.
  * \param[in] tag               Buffer containing the authentication tag.
  * \param tag_length            Size of the \p tag buffer in bytes.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The calculations were successful, but the authentication tag is
  *         not correct.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p plaintext buffer is too small.
  *         #PSA_AEAD_VERIFY_OUTPUT_SIZE(\c key_type, \c alg) or
  *         #PSA_AEAD_VERIFY_OUTPUT_MAX_SIZE can be used to determine the
  *         required buffer size.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The total length of input to psa_aead_update_ad() so far is
  *         less than the additional data length that was previously
  *         specified with psa_aead_set_lengths(), or
  *         the total length of input to psa_aead_update() so far is
  *         less than the plaintext length that was previously
  *         specified with psa_aead_set_lengths().
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be an active decryption
  *         operation with a nonce set), or the library has not been previously
  *         initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_aead_verify(psa_aead_operation_t *operation,
                              uint8_t *plaintext,
                              size_t plaintext_size,
                              size_t *plaintext_length,
                              const uint8_t *tag,
                              size_t tag_length);
 
 /** Abort an AEAD operation.
  *
  * Aborting an operation frees all associated resources except for the
  * \p operation structure itself. Once aborted, the operation object
  * can be reused for another operation by calling
  * psa_aead_encrypt_setup() or psa_aead_decrypt_setup() again.
  *
  * You may call this function any time after the operation object has
  * been initialized as described in #psa_aead_operation_t.
  *
  * In particular, calling psa_aead_abort() after the operation has been
  * terminated by a call to psa_aead_abort(), psa_aead_finish() or
  * psa_aead_verify() is safe and has no effect.
  *
  * \param[in,out] operation     Initialized AEAD operation.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_aead_abort(psa_aead_operation_t *operation);
 
 /**@}*/
 
 /** \defgroup asymmetric Asymmetric cryptography
  * @{
  */
 
 /**
  * \brief Sign a message with a private key. For hash-and-sign algorithms,
  *        this includes the hashing step.
  *
  * \note To perform a multi-part hash-and-sign signature algorithm, first use
  *       a multi-part hash operation and then pass the resulting hash to
  *       psa_sign_hash(). PSA_ALG_GET_HASH(\p alg) can be used to determine the
  *       hash algorithm to use.
  *
  * \param[in]  key              Identifier of the key to use for the operation.
  *                              It must be an asymmetric key pair. The key must
  *                              allow the usage #PSA_KEY_USAGE_SIGN_MESSAGE.
  * \param[in]  alg              An asymmetric signature algorithm (PSA_ALG_XXX
  *                              value such that #PSA_ALG_IS_SIGN_MESSAGE(\p alg)
  *                              is true), that is compatible with the type of
  *                              \p key.
  * \param[in]  input            The input message to sign.
  * \param[in]  input_length     Size of the \p input buffer in bytes.
  * \param[out] signature        Buffer where the signature is to be written.
  * \param[in]  signature_size   Size of the \p signature buffer in bytes. This
  *                              must be appropriate for the selected
  *                              algorithm and key:
  *                              - The required signature size is
  *                                #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
  *                                where \c key_type and \c key_bits are the type and
  *                                bit-size respectively of key.
  *                              - #PSA_SIGNATURE_MAX_SIZE evaluates to the
  *                                maximum signature size of any supported
  *                                signature algorithm.
  * \param[out] signature_length On success, the number of bytes that make up
  *                              the returned signature value.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The key does not have the #PSA_KEY_USAGE_SIGN_MESSAGE flag,
  *         or it does not permit the requested algorithm.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p signature buffer is too small. You can
  *         determine a sufficient buffer size by calling
  *         #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
  *         where \c key_type and \c key_bits are the type and bit-size
  *         respectively of \p key.
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_sign_message(mbedtls_svc_key_id_t key,
                               psa_algorithm_t alg,
                               const uint8_t *input,
                               size_t input_length,
                               uint8_t *signature,
                               size_t signature_size,
                               size_t *signature_length);
 
 /** \brief Verify the signature of a message with a public key, using
  *         a hash-and-sign verification algorithm.
  *
  * \note To perform a multi-part hash-and-sign signature verification
  *       algorithm, first use a multi-part hash operation to hash the message
  *       and then pass the resulting hash to psa_verify_hash().
  *       PSA_ALG_GET_HASH(\p alg) can be used to determine the hash algorithm
  *       to use.
  *
  * \param[in]  key              Identifier of the key to use for the operation.
  *                              It must be a public key or an asymmetric key
  *                              pair. The key must allow the usage
  *                              #PSA_KEY_USAGE_VERIFY_MESSAGE.
  * \param[in]  alg              An asymmetric signature algorithm (PSA_ALG_XXX
  *                              value such that #PSA_ALG_IS_SIGN_MESSAGE(\p alg)
  *                              is true), that is compatible with the type of
  *                              \p key.
  * \param[in]  input            The message whose signature is to be verified.
  * \param[in]  input_length     Size of the \p input buffer in bytes.
  * \param[in] signature         Buffer containing the signature to verify.
  * \param[in]  signature_length Size of the \p signature buffer in bytes.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The key does not have the #PSA_KEY_USAGE_SIGN_MESSAGE flag,
  *         or it does not permit the requested algorithm.
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The calculation was performed successfully, but the passed signature
  *         is not a valid signature.
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_verify_message(mbedtls_svc_key_id_t key,
                                 psa_algorithm_t alg,
                                 const uint8_t *input,
                                 size_t input_length,
                                 const uint8_t *signature,
                                 size_t signature_length);
 
 /**
  * \brief Sign a hash or short message with a private key.
  *
  * Note that to perform a hash-and-sign signature algorithm, you must
  * first calculate the hash by calling psa_hash_setup(), psa_hash_update()
  * and psa_hash_finish(), or alternatively by calling psa_hash_compute().
  * Then pass the resulting hash as the \p hash
  * parameter to this function. You can use #PSA_ALG_SIGN_GET_HASH(\p alg)
  * to determine the hash algorithm to use.
  *
  * \param key                   Identifier of the key to use for the operation.
  *                              It must be an asymmetric key pair. The key must
  *                              allow the usage #PSA_KEY_USAGE_SIGN_HASH.
  * \param alg                   A signature algorithm (PSA_ALG_XXX
  *                              value such that #PSA_ALG_IS_SIGN_HASH(\p alg)
  *                              is true), that is compatible with
  *                              the type of \p key.
  * \param[in] hash              The hash or message to sign.
  * \param hash_length           Size of the \p hash buffer in bytes.
  * \param[out] signature        Buffer where the signature is to be written.
  * \param signature_size        Size of the \p signature buffer in bytes.
  * \param[out] signature_length On success, the number of bytes
  *                              that make up the returned signature value.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p signature buffer is too small. You can
  *         determine a sufficient buffer size by calling
  *         #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
  *         where \c key_type and \c key_bits are the type and bit-size
  *         respectively of \p key.
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_sign_hash(mbedtls_svc_key_id_t key,
                            psa_algorithm_t alg,
                            const uint8_t *hash,
                            size_t hash_length,
                            uint8_t *signature,
                            size_t signature_size,
                            size_t *signature_length);
 
 /**
  * \brief Verify the signature of a hash or short message using a public key.
  *
  * Note that to perform a hash-and-sign signature algorithm, you must
  * first calculate the hash by calling psa_hash_setup(), psa_hash_update()
  * and psa_hash_finish(), or alternatively by calling psa_hash_compute().
  * Then pass the resulting hash as the \p hash
  * parameter to this function. You can use #PSA_ALG_SIGN_GET_HASH(\p alg)
  * to determine the hash algorithm to use.
  *
  * \param key               Identifier of the key to use for the operation. It
  *                          must be a public key or an asymmetric key pair. The
  *                          key must allow the usage
  *                          #PSA_KEY_USAGE_VERIFY_HASH.
  * \param alg               A signature algorithm (PSA_ALG_XXX
  *                          value such that #PSA_ALG_IS_SIGN_HASH(\p alg)
  *                          is true), that is compatible with
  *                          the type of \p key.
  * \param[in] hash          The hash or message whose signature is to be
  *                          verified.
  * \param hash_length       Size of the \p hash buffer in bytes.
  * \param[in] signature     Buffer containing the signature to verify.
  * \param signature_length  Size of the \p signature buffer in bytes.
  *
  * \retval #PSA_SUCCESS
  *         The signature is valid.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The calculation was performed successfully, but the passed
  *         signature is not a valid signature.
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_verify_hash(mbedtls_svc_key_id_t key,
                              psa_algorithm_t alg,
                              const uint8_t *hash,
                              size_t hash_length,
                              const uint8_t *signature,
                              size_t signature_length);
 
 /**
  * \brief Encrypt a short message with a public key.
  *
  * \param key                   Identifier of the key to use for the operation.
  *                              It must be a public key or an asymmetric key
  *                              pair. It must allow the usage
  *                              #PSA_KEY_USAGE_ENCRYPT.
  * \param alg                   An asymmetric encryption algorithm that is
  *                              compatible with the type of \p key.
  * \param[in] input             The message to encrypt.
  * \param input_length          Size of the \p input buffer in bytes.
  * \param[in] salt              A salt or label, if supported by the
  *                              encryption algorithm.
  *                              If the algorithm does not support a
  *                              salt, pass \c NULL.
  *                              If the algorithm supports an optional
  *                              salt and you do not want to pass a salt,
  *                              pass \c NULL.
  *
  *                              - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
  *                                supported.
  * \param salt_length           Size of the \p salt buffer in bytes.
  *                              If \p salt is \c NULL, pass 0.
  * \param[out] output           Buffer where the encrypted message is to
  *                              be written.
  * \param output_size           Size of the \p output buffer in bytes.
  * \param[out] output_length    On success, the number of bytes
  *                              that make up the returned output.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p output buffer is too small. You can
  *         determine a sufficient buffer size by calling
  *         #PSA_ASYMMETRIC_ENCRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
  *         where \c key_type and \c key_bits are the type and bit-size
  *         respectively of \p key.
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_asymmetric_encrypt(mbedtls_svc_key_id_t key,
                                     psa_algorithm_t alg,
                                     const uint8_t *input,
                                     size_t input_length,
                                     const uint8_t *salt,
                                     size_t salt_length,
                                     uint8_t *output,
                                     size_t output_size,
                                     size_t *output_length);
 
 /**
  * \brief Decrypt a short message with a private key.
  *
  * \param key                   Identifier of the key to use for the operation.
  *                              It must be an asymmetric key pair. It must
  *                              allow the usage #PSA_KEY_USAGE_DECRYPT.
  * \param alg                   An asymmetric encryption algorithm that is
  *                              compatible with the type of \p key.
  * \param[in] input             The message to decrypt.
  * \param input_length          Size of the \p input buffer in bytes.
  * \param[in] salt              A salt or label, if supported by the
  *                              encryption algorithm.
  *                              If the algorithm does not support a
  *                              salt, pass \c NULL.
  *                              If the algorithm supports an optional
  *                              salt and you do not want to pass a salt,
  *                              pass \c NULL.
  *
  *                              - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
  *                                supported.
  * \param salt_length           Size of the \p salt buffer in bytes.
  *                              If \p salt is \c NULL, pass 0.
  * \param[out] output           Buffer where the decrypted message is to
  *                              be written.
  * \param output_size           Size of the \c output buffer in bytes.
  * \param[out] output_length    On success, the number of bytes
  *                              that make up the returned output.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p output buffer is too small. You can
  *         determine a sufficient buffer size by calling
  *         #PSA_ASYMMETRIC_DECRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
  *         where \c key_type and \c key_bits are the type and bit-size
  *         respectively of \p key.
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_INVALID_PADDING \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_asymmetric_decrypt(mbedtls_svc_key_id_t key,
                                     psa_algorithm_t alg,
                                     const uint8_t *input,
                                     size_t input_length,
                                     const uint8_t *salt,
                                     size_t salt_length,
                                     uint8_t *output,
                                     size_t output_size,
                                     size_t *output_length);
 
 /**@}*/
 
 /** \defgroup key_derivation Key derivation and pseudorandom generation
  * @{
  */
 
 /** The type of the state data structure for key derivation operations.
  *
  * Before calling any function on a key derivation operation object, the
  * application must initialize it by any of the following means:
  * - Set the structure to all-bits-zero, for example:
  *   \code
  *   psa_key_derivation_operation_t operation;
  *   memset(&operation, 0, sizeof(operation));
  *   \endcode
  * - Initialize the structure to logical zero values, for example:
  *   \code
  *   psa_key_derivation_operation_t operation = {0};
  *   \endcode
  * - Initialize the structure to the initializer #PSA_KEY_DERIVATION_OPERATION_INIT,
  *   for example:
  *   \code
  *   psa_key_derivation_operation_t operation = PSA_KEY_DERIVATION_OPERATION_INIT;
  *   \endcode
  * - Assign the result of the function psa_key_derivation_operation_init()
  *   to the structure, for example:
  *   \code
  *   psa_key_derivation_operation_t operation;
  *   operation = psa_key_derivation_operation_init();
  *   \endcode
  *
  * This is an implementation-defined \c struct. Applications should not
  * make any assumptions about the content of this structure.
  * Implementation details can change in future versions without notice.
  */
 typedef struct psa_key_derivation_s psa_key_derivation_operation_t;
 
 /** \def PSA_KEY_DERIVATION_OPERATION_INIT
  *
  * This macro returns a suitable initializer for a key derivation operation
  * object of type #psa_key_derivation_operation_t.
  */
 
 /** Return an initial value for a key derivation operation object.
  */
 static psa_key_derivation_operation_t psa_key_derivation_operation_init(void);
 
 /** Set up a key derivation operation.
  *
  * A key derivation algorithm takes some inputs and uses them to generate
  * a byte stream in a deterministic way.
  * This byte stream can be used to produce keys and other
  * cryptographic material.
  *
  * To derive a key:
  * -# Start with an initialized object of type #psa_key_derivation_operation_t.
  * -# Call psa_key_derivation_setup() to select the algorithm.
  * -# Provide the inputs for the key derivation by calling
  *    psa_key_derivation_input_bytes() or psa_key_derivation_input_key()
  *    as appropriate. Which inputs are needed, in what order, and whether
  *    they may be keys and if so of what type depends on the algorithm.
  * -# Optionally set the operation's maximum capacity with
  *    psa_key_derivation_set_capacity(). You may do this before, in the middle
  *    of or after providing inputs. For some algorithms, this step is mandatory
  *    because the output depends on the maximum capacity.
  * -# To derive a key, call psa_key_derivation_output_key() or
  *    psa_key_derivation_output_key_custom().
  *    To derive a byte string for a different purpose, call
  *    psa_key_derivation_output_bytes().
  *    Successive calls to these functions use successive output bytes
  *    calculated by the key derivation algorithm.
  * -# Clean up the key derivation operation object with
  *    psa_key_derivation_abort().
  *
  * If this function returns an error, the key derivation operation object is
  * not changed.
  *
  * If an error occurs at any step after a call to psa_key_derivation_setup(),
  * the operation will need to be reset by a call to psa_key_derivation_abort().
  *
  * Implementations must reject an attempt to derive a key of size 0.
  *
  * \param[in,out] operation       The key derivation operation object
  *                                to set up. It must
  *                                have been initialized but not set up yet.
  * \param alg                     The key derivation algorithm to compute
  *                                (\c PSA_ALG_XXX value such that
  *                                #PSA_ALG_IS_KEY_DERIVATION(\p alg) is true).
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \c alg is not a key derivation algorithm.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \c alg is not supported or is not a key derivation algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be inactive), or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_setup(
     psa_key_derivation_operation_t *operation,
     psa_algorithm_t alg);
 
 /** Retrieve the current capacity of a key derivation operation.
  *
  * The capacity of a key derivation is the maximum number of bytes that it can
  * return. When you get *N* bytes of output from a key derivation operation,
  * this reduces its capacity by *N*.
  *
  * \param[in] operation     The operation to query.
  * \param[out] capacity     On success, the capacity of the operation.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active), or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_get_capacity(
     const psa_key_derivation_operation_t *operation,
     size_t *capacity);
 
 /** Set the maximum capacity of a key derivation operation.
  *
  * The capacity of a key derivation operation is the maximum number of bytes
  * that the key derivation operation can return from this point onwards.
  *
  * \param[in,out] operation The key derivation operation object to modify.
  * \param capacity          The new capacity of the operation.
  *                          It must be less or equal to the operation's
  *                          current capacity.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p capacity is larger than the operation's current capacity.
  *         In this case, the operation object remains valid and its capacity
  *         remains unchanged.
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active), or the
  *         library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_set_capacity(
     psa_key_derivation_operation_t *operation,
     size_t capacity);
 
 /** Use the maximum possible capacity for a key derivation operation.
  *
  * Use this value as the capacity argument when setting up a key derivation
  * to indicate that the operation should have the maximum possible capacity.
  * The value of the maximum possible capacity depends on the key derivation
  * algorithm.
  */
 #define PSA_KEY_DERIVATION_UNLIMITED_CAPACITY ((size_t) (-1))
 
 /** Provide an input for key derivation or key agreement.
  *
  * Which inputs are required and in what order depends on the algorithm.
  * Refer to the documentation of each key derivation or key agreement
  * algorithm for information.
  *
  * This function passes direct inputs, which is usually correct for
  * non-secret inputs. To pass a secret input, which should be in a key
  * object, call psa_key_derivation_input_key() instead of this function.
  * Refer to the documentation of individual step types
  * (`PSA_KEY_DERIVATION_INPUT_xxx` values of type ::psa_key_derivation_step_t)
  * for more information.
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_key_derivation_abort().
  *
  * \param[in,out] operation       The key derivation operation object to use.
  *                                It must have been set up with
  *                                psa_key_derivation_setup() and must not
  *                                have produced any output yet.
  * \param step                    Which step the input data is for.
  * \param[in] data                Input data to use.
  * \param data_length             Size of the \p data buffer in bytes.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \c step is not compatible with the operation's algorithm, or
  *         \c step does not allow direct inputs.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid for this input \p step, or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_input_bytes(
     psa_key_derivation_operation_t *operation,
     psa_key_derivation_step_t step,
     const uint8_t *data,
     size_t data_length);
 
 /** Provide a numeric input for key derivation or key agreement.
  *
  * Which inputs are required and in what order depends on the algorithm.
  * However, when an algorithm requires a particular order, numeric inputs
  * usually come first as they tend to be configuration parameters.
  * Refer to the documentation of each key derivation or key agreement
  * algorithm for information.
  *
  * This function is used for inputs which are fixed-size non-negative
  * integers.
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_key_derivation_abort().
  *
  * \param[in,out] operation       The key derivation operation object to use.
  *                                It must have been set up with
  *                                psa_key_derivation_setup() and must not
  *                                have produced any output yet.
  * \param step                    Which step the input data is for.
  * \param[in] value               The value of the numeric input.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \c step is not compatible with the operation's algorithm, or
  *         \c step does not allow numeric inputs.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid for this input \p step, or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_input_integer(
     psa_key_derivation_operation_t *operation,
     psa_key_derivation_step_t step,
     uint64_t value);
 
 /** Provide an input for key derivation in the form of a key.
  *
  * Which inputs are required and in what order depends on the algorithm.
  * Refer to the documentation of each key derivation or key agreement
  * algorithm for information.
  *
  * This function obtains input from a key object, which is usually correct for
  * secret inputs or for non-secret personalization strings kept in the key
  * store. To pass a non-secret parameter which is not in the key store,
  * call psa_key_derivation_input_bytes() instead of this function.
  * Refer to the documentation of individual step types
  * (`PSA_KEY_DERIVATION_INPUT_xxx` values of type ::psa_key_derivation_step_t)
  * for more information.
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_key_derivation_abort().
  *
  * \param[in,out] operation       The key derivation operation object to use.
  *                                It must have been set up with
  *                                psa_key_derivation_setup() and must not
  *                                have produced any output yet.
  * \param step                    Which step the input data is for.
  * \param key                     Identifier of the key. It must have an
  *                                appropriate type for step and must allow the
  *                                usage #PSA_KEY_USAGE_DERIVE or
  *                                #PSA_KEY_USAGE_VERIFY_DERIVATION (see note)
  *                                and the algorithm used by the operation.
  *
  * \note Once all inputs steps are completed, the operations will allow:
  * - psa_key_derivation_output_bytes() if each input was either a direct input
  *   or  a key with #PSA_KEY_USAGE_DERIVE set;
  * - psa_key_derivation_output_key() or psa_key_derivation_output_key_custom()
  *   if the input for step
  *   #PSA_KEY_DERIVATION_INPUT_SECRET or #PSA_KEY_DERIVATION_INPUT_PASSWORD
  *   was from a key slot with #PSA_KEY_USAGE_DERIVE and each other input was
  *   either a direct input or a key with #PSA_KEY_USAGE_DERIVE set;
  * - psa_key_derivation_verify_bytes() if each input was either a direct input
  *   or  a key with #PSA_KEY_USAGE_VERIFY_DERIVATION set;
  * - psa_key_derivation_verify_key() under the same conditions as
  *   psa_key_derivation_verify_bytes().
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The key allows neither #PSA_KEY_USAGE_DERIVE nor
  *         #PSA_KEY_USAGE_VERIFY_DERIVATION, or it doesn't allow this
  *         algorithm.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \c step is not compatible with the operation's algorithm, or
  *         \c step does not allow key inputs of the given type
  *         or does not allow key inputs at all.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid for this input \p step, or
  *         the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_input_key(
     psa_key_derivation_operation_t *operation,
     psa_key_derivation_step_t step,
     mbedtls_svc_key_id_t key);
 
 /** Perform a key agreement and use the shared secret as input to a key
  * derivation.
  *
  * A key agreement algorithm takes two inputs: a private key \p private_key
  * a public key \p peer_key.
  * The result of this function is passed as input to a key derivation.
  * The output of this key derivation can be extracted by reading from the
  * resulting operation to produce keys and other cryptographic material.
  *
  * If this function returns an error status, the operation enters an error
  * state and must be aborted by calling psa_key_derivation_abort().
  *
  * \param[in,out] operation       The key derivation operation object to use.
  *                                It must have been set up with
  *                                psa_key_derivation_setup() with a
  *                                key agreement and derivation algorithm
  *                                \c alg (\c PSA_ALG_XXX value such that
  *                                #PSA_ALG_IS_KEY_AGREEMENT(\c alg) is true
  *                                and #PSA_ALG_IS_RAW_KEY_AGREEMENT(\c alg)
  *                                is false).
  *                                The operation must be ready for an
  *                                input of the type given by \p step.
  * \param step                    Which step the input data is for.
  * \param private_key             Identifier of the private key to use. It must
  *                                allow the usage #PSA_KEY_USAGE_DERIVE.
  * \param[in] peer_key      Public key of the peer. The peer key must be in the
  *                          same format that psa_import_key() accepts for the
  *                          public key type corresponding to the type of
  *                          private_key. That is, this function performs the
  *                          equivalent of
  *                          #psa_import_key(...,
  *                          `peer_key`, `peer_key_length`) where
  *                          with key attributes indicating the public key
  *                          type corresponding to the type of `private_key`.
  *                          For example, for EC keys, this means that peer_key
  *                          is interpreted as a point on the curve that the
  *                          private key is on. The standard formats for public
  *                          keys are documented in the documentation of
  *                          psa_export_public_key().
  * \param peer_key_length         Size of \p peer_key in bytes.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \c private_key is not compatible with \c alg,
  *         or \p peer_key is not valid for \c alg or not compatible with
  *         \c private_key, or \c step does not allow an input resulting
  *         from a key agreement.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \c alg is not supported or is not a key derivation algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid for this key agreement \p step,
  *         or the library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_key_agreement(
     psa_key_derivation_operation_t *operation,
     psa_key_derivation_step_t step,
     mbedtls_svc_key_id_t private_key,
     const uint8_t *peer_key,
     size_t peer_key_length);
 
 /** Read some data from a key derivation operation.
  *
  * This function calculates output bytes from a key derivation algorithm and
  * return those bytes.
  * If you view the key derivation's output as a stream of bytes, this
  * function destructively reads the requested number of bytes from the
  * stream.
  * The operation's capacity decreases by the number of bytes read.
  *
  * If this function returns an error status other than
  * #PSA_ERROR_INSUFFICIENT_DATA, the operation enters an error
  * state and must be aborted by calling psa_key_derivation_abort().
  *
  * \param[in,out] operation The key derivation operation object to read from.
  * \param[out] output       Buffer where the output will be written.
  * \param output_length     Number of bytes to output.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         One of the inputs was a key whose policy didn't allow
  *         #PSA_KEY_USAGE_DERIVE.
  * \retval #PSA_ERROR_INSUFFICIENT_DATA
  *                          The operation's capacity was less than
  *                          \p output_length bytes. Note that in this case,
  *                          no output is written to the output buffer.
  *                          The operation's capacity is set to 0, thus
  *                          subsequent calls to this function will not
  *                          succeed, even with a smaller output buffer.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active and completed
  *         all required input steps), or the library has not been previously
  *         initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_output_bytes(
     psa_key_derivation_operation_t *operation,
     uint8_t *output,
     size_t output_length);
 
 /** Derive a key from an ongoing key derivation operation.
  *
  * This function calculates output bytes from a key derivation algorithm
  * and uses those bytes to generate a key deterministically.
  * The key's location, usage policy, type and size are taken from
  * \p attributes.
  *
  * If you view the key derivation's output as a stream of bytes, this
  * function destructively reads as many bytes as required from the
  * stream.
  * The operation's capacity decreases by the number of bytes read.
  *
  * If this function returns an error status other than
  * #PSA_ERROR_INSUFFICIENT_DATA, the operation enters an error
  * state and must be aborted by calling psa_key_derivation_abort().
  *
  * How much output is produced and consumed from the operation, and how
  * the key is derived, depends on the key type and on the key size
  * (denoted \c bits below):
  *
  * - For key types for which the key is an arbitrary sequence of bytes
  *   of a given size, this function is functionally equivalent to
  *   calling #psa_key_derivation_output_bytes
  *   and passing the resulting output to #psa_import_key.
  *   However, this function has a security benefit:
  *   if the implementation provides an isolation boundary then
  *   the key material is not exposed outside the isolation boundary.
  *   As a consequence, for these key types, this function always consumes
  *   exactly (\c bits / 8) bytes from the operation.
  *   The following key types defined in this specification follow this scheme:
  *
  *     - #PSA_KEY_TYPE_AES;
  *     - #PSA_KEY_TYPE_ARIA;
  *     - #PSA_KEY_TYPE_CAMELLIA;
  *     - #PSA_KEY_TYPE_DERIVE;
  *     - #PSA_KEY_TYPE_HMAC;
  *     - #PSA_KEY_TYPE_PASSWORD_HASH.
  *
  * - For ECC keys on a Montgomery elliptic curve
  *   (#PSA_KEY_TYPE_ECC_KEY_PAIR(\c curve) where \c curve designates a
  *   Montgomery curve), this function always draws a byte string whose
  *   length is determined by the curve, and sets the mandatory bits
  *   accordingly. That is:
  *
  *     - Curve25519 (#PSA_ECC_FAMILY_MONTGOMERY, 255 bits): draw a 32-byte
  *       string and process it as specified in RFC 7748 &sect;5.
  *     - Curve448 (#PSA_ECC_FAMILY_MONTGOMERY, 448 bits): draw a 56-byte
  *       string and process it as specified in RFC 7748 &sect;5.
  *
  * - For key types for which the key is represented by a single sequence of
  *   \c bits bits with constraints as to which bit sequences are acceptable,
  *   this function draws a byte string of length (\c bits / 8) bytes rounded
  *   up to the nearest whole number of bytes. If the resulting byte string
  *   is acceptable, it becomes the key, otherwise the drawn bytes are discarded.
  *   This process is repeated until an acceptable byte string is drawn.
  *   The byte string drawn from the operation is interpreted as specified
  *   for the output produced by psa_export_key().
  *   The following key types defined in this specification follow this scheme:
  *
  *     - #PSA_KEY_TYPE_DES.
  *       Force-set the parity bits, but discard forbidden weak keys.
  *       For 2-key and 3-key triple-DES, the three keys are generated
  *       successively (for example, for 3-key triple-DES,
  *       if the first 8 bytes specify a weak key and the next 8 bytes do not,
  *       discard the first 8 bytes, use the next 8 bytes as the first key,
  *       and continue reading output from the operation to derive the other
  *       two keys).
  *     - Finite-field Diffie-Hellman keys (#PSA_KEY_TYPE_DH_KEY_PAIR(\c group)
  *       where \c group designates any Diffie-Hellman group) and
  *       ECC keys on a Weierstrass elliptic curve
  *       (#PSA_KEY_TYPE_ECC_KEY_PAIR(\c curve) where \c curve designates a
  *       Weierstrass curve).
  *       For these key types, interpret the byte string as integer
  *       in big-endian order. Discard it if it is not in the range
  *       [0, *N* - 2] where *N* is the boundary of the private key domain
  *       (the prime *p* for Diffie-Hellman, the subprime *q* for DSA,
  *       or the order of the curve's base point for ECC).
  *       Add 1 to the resulting integer and use this as the private key *x*.
  *       This method allows compliance to NIST standards, specifically
  *       the methods titled "key-pair generation by testing candidates"
  *       in NIST SP 800-56A &sect;5.6.1.1.4 for Diffie-Hellman,
  *       in FIPS 186-4 &sect;B.1.2 for DSA, and
  *       in NIST SP 800-56A &sect;5.6.1.2.2 or
  *       FIPS 186-4 &sect;B.4.2 for elliptic curve keys.
  *
  * - For other key types, including #PSA_KEY_TYPE_RSA_KEY_PAIR,
  *   the way in which the operation output is consumed is
  *   implementation-defined.
  *
  * In all cases, the data that is read is discarded from the operation.
  * The operation's capacity is decreased by the number of bytes read.
  *
  * For algorithms that take an input step #PSA_KEY_DERIVATION_INPUT_SECRET,
  * the input to that step must be provided with psa_key_derivation_input_key().
  * Future versions of this specification may include additional restrictions
  * on the derived key based on the attributes and strength of the secret key.
  *
  * \note This function is equivalent to calling
  *       psa_key_derivation_output_key_custom()
  *       with the custom production parameters #PSA_CUSTOM_KEY_PARAMETERS_INIT
  *       and `custom_data_length == 0` (i.e. `custom_data` is empty).
  *
  * \param[in] attributes    The attributes for the new key.
  *                          If the key type to be created is
  *                          #PSA_KEY_TYPE_PASSWORD_HASH then the algorithm in
  *                          the policy must be the same as in the current
  *                          operation.
  * \param[in,out] operation The key derivation operation object to read from.
  * \param[out] key          On success, an identifier for the newly created
  *                          key. For persistent keys, this is the key
  *                          identifier defined in \p attributes.
  *                          \c 0 on failure.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  *         If the key is persistent, the key material and the key's metadata
  *         have been saved to persistent storage.
  * \retval #PSA_ERROR_ALREADY_EXISTS
  *         This is an attempt to create a persistent key, and there is
  *         already a persistent key with the given identifier.
  * \retval #PSA_ERROR_INSUFFICIENT_DATA
  *         There was not enough data to create the desired key.
  *         Note that in this case, no output is written to the output buffer.
  *         The operation's capacity is set to 0, thus subsequent calls to
  *         this function will not succeed, even with a smaller output buffer.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         The key type or key size is not supported, either by the
  *         implementation in general or in this particular location.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The provided key attributes are not valid for the operation.
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The #PSA_KEY_DERIVATION_INPUT_SECRET or
  *         #PSA_KEY_DERIVATION_INPUT_PASSWORD input was not provided through a
  *         key; or one of the inputs was a key whose policy didn't allow
  *         #PSA_KEY_USAGE_DERIVE.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active and completed
  *         all required input steps), or the library has not been previously
  *         initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_output_key(
     const psa_key_attributes_t *attributes,
     psa_key_derivation_operation_t *operation,
     mbedtls_svc_key_id_t *key);
 
 /** Derive a key from an ongoing key derivation operation with custom
  *  production parameters.
  *
  * See the description of psa_key_derivation_out_key() for the operation of
  * this function with the default production parameters.
  * Mbed TLS currently does not currently support any non-default production
  * parameters.
  *
  * \note This function is experimental and may change in future minor
  *       versions of Mbed TLS.
  *
  * \param[in] attributes    The attributes for the new key.
  *                          If the key type to be created is
  *                          #PSA_KEY_TYPE_PASSWORD_HASH then the algorithm in
  *                          the policy must be the same as in the current
  *                          operation.
  * \param[in,out] operation The key derivation operation object to read from.
  * \param[in] custom        Customization parameters for the key generation.
  *                          When this is #PSA_CUSTOM_KEY_PARAMETERS_INIT
  *                          with \p custom_data_length = 0,
  *                          this function is equivalent to
  *                          psa_key_derivation_output_key().
  * \param[in] custom_data   Variable-length data associated with \c custom.
  * \param custom_data_length
  *                          Length of `custom_data` in bytes.
  * \param[out] key          On success, an identifier for the newly created
  *                          key. For persistent keys, this is the key
  *                          identifier defined in \p attributes.
  *                          \c 0 on failure.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  *         If the key is persistent, the key material and the key's metadata
  *         have been saved to persistent storage.
  * \retval #PSA_ERROR_ALREADY_EXISTS
  *         This is an attempt to create a persistent key, and there is
  *         already a persistent key with the given identifier.
  * \retval #PSA_ERROR_INSUFFICIENT_DATA
  *         There was not enough data to create the desired key.
  *         Note that in this case, no output is written to the output buffer.
  *         The operation's capacity is set to 0, thus subsequent calls to
  *         this function will not succeed, even with a smaller output buffer.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         The key type or key size is not supported, either by the
  *         implementation in general or in this particular location.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The provided key attributes are not valid for the operation.
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The #PSA_KEY_DERIVATION_INPUT_SECRET or
  *         #PSA_KEY_DERIVATION_INPUT_PASSWORD input was not provided through a
  *         key; or one of the inputs was a key whose policy didn't allow
  *         #PSA_KEY_USAGE_DERIVE.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active and completed
  *         all required input steps), or the library has not been previously
  *         initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_output_key_custom(
     const psa_key_attributes_t *attributes,
     psa_key_derivation_operation_t *operation,
     const psa_custom_key_parameters_t *custom,
     const uint8_t *custom_data,
     size_t custom_data_length,
     mbedtls_svc_key_id_t *key);
 
 #ifndef __cplusplus
 /* Omitted when compiling in C++, because one of the parameters is a
  * pointer to a struct with a flexible array member, and that is not
  * standard C++.
  * https://github.com/Mbed-TLS/mbedtls/issues/9020
  */
 /** Derive a key from an ongoing key derivation operation with custom
  *  production parameters.
  *
  * \note
  * This is a deprecated variant of psa_key_derivation_output_key_custom().
  * It is equivalent except that the associated variable-length data
  * is passed in `params->data` instead of a separate parameter.
  * This function will be removed in a future version of Mbed TLS.
  *
  * \param[in] attributes    The attributes for the new key.
  *                          If the key type to be created is
  *                          #PSA_KEY_TYPE_PASSWORD_HASH then the algorithm in
  *                          the policy must be the same as in the current
  *                          operation.
  * \param[in,out] operation The key derivation operation object to read from.
  * \param[in] params        Customization parameters for the key derivation.
  *                          When this is #PSA_KEY_PRODUCTION_PARAMETERS_INIT
  *                          with \p params_data_length = 0,
  *                          this function is equivalent to
  *                          psa_key_derivation_output_key().
  *                          Mbed TLS currently only supports the default
  *                          production parameters, i.e.
  *                          #PSA_KEY_PRODUCTION_PARAMETERS_INIT,
  *                          for all key types.
  * \param params_data_length
  *                          Length of `params->data` in bytes.
  * \param[out] key          On success, an identifier for the newly created
  *                          key. For persistent keys, this is the key
  *                          identifier defined in \p attributes.
  *                          \c 0 on failure.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  *         If the key is persistent, the key material and the key's metadata
  *         have been saved to persistent storage.
  * \retval #PSA_ERROR_ALREADY_EXISTS
  *         This is an attempt to create a persistent key, and there is
  *         already a persistent key with the given identifier.
  * \retval #PSA_ERROR_INSUFFICIENT_DATA
  *         There was not enough data to create the desired key.
  *         Note that in this case, no output is written to the output buffer.
  *         The operation's capacity is set to 0, thus subsequent calls to
  *         this function will not succeed, even with a smaller output buffer.
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         The key type or key size is not supported, either by the
  *         implementation in general or in this particular location.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The provided key attributes are not valid for the operation.
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The #PSA_KEY_DERIVATION_INPUT_SECRET or
  *         #PSA_KEY_DERIVATION_INPUT_PASSWORD input was not provided through a
  *         key; or one of the inputs was a key whose policy didn't allow
  *         #PSA_KEY_USAGE_DERIVE.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active and completed
  *         all required input steps), or the library has not been previously
  *         initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_output_key_ext(
     const psa_key_attributes_t *attributes,
     psa_key_derivation_operation_t *operation,
     const psa_key_production_parameters_t *params,
     size_t params_data_length,
     mbedtls_svc_key_id_t *key);
 #endif /* !__cplusplus */
 
 /** Compare output data from a key derivation operation to an expected value.
  *
  * This function calculates output bytes from a key derivation algorithm and
  * compares those bytes to an expected value in constant time.
  * If you view the key derivation's output as a stream of bytes, this
  * function destructively reads the expected number of bytes from the
  * stream before comparing them.
  * The operation's capacity decreases by the number of bytes read.
  *
  * This is functionally equivalent to the following code:
  * \code
  * psa_key_derivation_output_bytes(operation, tmp, output_length);
  * if (memcmp(output, tmp, output_length) != 0)
  *     return PSA_ERROR_INVALID_SIGNATURE;
  * \endcode
  * except (1) it works even if the key's policy does not allow outputting the
  * bytes, and (2) the comparison will be done in constant time.
  *
  * If this function returns an error status other than
  * #PSA_ERROR_INSUFFICIENT_DATA or #PSA_ERROR_INVALID_SIGNATURE,
  * the operation enters an error state and must be aborted by calling
  * psa_key_derivation_abort().
  *
  * \param[in,out] operation The key derivation operation object to read from.
  * \param[in] expected      Buffer containing the expected derivation output.
  * \param expected_length   Length of the expected output; this is also the
  *                          number of bytes that will be read.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The output was read successfully, but it differs from the expected
  *         output.
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         One of the inputs was a key whose policy didn't allow
  *         #PSA_KEY_USAGE_VERIFY_DERIVATION.
  * \retval #PSA_ERROR_INSUFFICIENT_DATA
  *                          The operation's capacity was less than
  *                          \p output_length bytes. Note that in this case,
  *                          the operation's capacity is set to 0, thus
  *                          subsequent calls to this function will not
  *                          succeed, even with a smaller expected output.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active and completed
  *         all required input steps), or the library has not been previously
  *         initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_verify_bytes(
     psa_key_derivation_operation_t *operation,
     const uint8_t *expected,
     size_t expected_length);
 
 /** Compare output data from a key derivation operation to an expected value
  * stored in a key object.
  *
  * This function calculates output bytes from a key derivation algorithm and
  * compares those bytes to an expected value, provided as key of type
  * #PSA_KEY_TYPE_PASSWORD_HASH.
  * If you view the key derivation's output as a stream of bytes, this
  * function destructively reads the number of bytes corresponding to the
  * length of the expected value from the stream before comparing them.
  * The operation's capacity decreases by the number of bytes read.
  *
  * This is functionally equivalent to exporting the key and calling
  * psa_key_derivation_verify_bytes() on the result, except that it
  * works even if the key cannot be exported.
  *
  * If this function returns an error status other than
  * #PSA_ERROR_INSUFFICIENT_DATA or #PSA_ERROR_INVALID_SIGNATURE,
  * the operation enters an error state and must be aborted by calling
  * psa_key_derivation_abort().
  *
  * \param[in,out] operation The key derivation operation object to read from.
  * \param[in] expected      A key of type #PSA_KEY_TYPE_PASSWORD_HASH
  *                          containing the expected output. Its policy must
  *                          include the #PSA_KEY_USAGE_VERIFY_DERIVATION flag
  *                          and the permitted algorithm must match the
  *                          operation. The value of this key was likely
  *                          computed by a previous call to
  *                          psa_key_derivation_output_key() or
  *                          psa_key_derivation_output_key_custom().
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The output was read successfully, but if differs from the expected
  *         output.
  * \retval #PSA_ERROR_INVALID_HANDLE
  *         The key passed as the expected value does not exist.
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         The key passed as the expected value has an invalid type.
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The key passed as the expected value does not allow this usage or
  *         this algorithm; or one of the inputs was a key whose policy didn't
  *         allow #PSA_KEY_USAGE_VERIFY_DERIVATION.
  * \retval #PSA_ERROR_INSUFFICIENT_DATA
  *                          The operation's capacity was less than
  *                          the length of the expected value. In this case,
  *                          the operation's capacity is set to 0, thus
  *                          subsequent calls to this function will not
  *                          succeed, even with a smaller expected output.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The operation state is not valid (it must be active and completed
  *         all required input steps), or the library has not been previously
  *         initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_verify_key(
     psa_key_derivation_operation_t *operation,
     psa_key_id_t expected);
 
 /** Abort a key derivation operation.
  *
  * Aborting an operation frees all associated resources except for the \c
  * operation structure itself. Once aborted, the operation object can be reused
  * for another operation by calling psa_key_derivation_setup() again.
  *
  * This function may be called at any time after the operation
  * object has been initialized as described in #psa_key_derivation_operation_t.
  *
  * In particular, it is valid to call psa_key_derivation_abort() twice, or to
  * call psa_key_derivation_abort() on an operation that has not been set up.
  *
  * \param[in,out] operation    The operation to abort.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_key_derivation_abort(
     psa_key_derivation_operation_t *operation);
 
 /** Perform a key agreement and return the raw shared secret.
  *
  * \warning The raw result of a key agreement algorithm such as finite-field
  * Diffie-Hellman or elliptic curve Diffie-Hellman has biases and should
  * not be used directly as key material. It should instead be passed as
  * input to a key derivation algorithm. To chain a key agreement with
  * a key derivation, use psa_key_derivation_key_agreement() and other
  * functions from the key derivation interface.
  *
  * \param alg                     The key agreement algorithm to compute
  *                                (\c PSA_ALG_XXX value such that
  *                                #PSA_ALG_IS_RAW_KEY_AGREEMENT(\p alg)
  *                                is true).
  * \param private_key             Identifier of the private key to use. It must
  *                                allow the usage #PSA_KEY_USAGE_DERIVE.
  * \param[in] peer_key            Public key of the peer. It must be
  *                                in the same format that psa_import_key()
  *                                accepts. The standard formats for public
  *                                keys are documented in the documentation
  *                                of psa_export_public_key().
  * \param peer_key_length         Size of \p peer_key in bytes.
  * \param[out] output             Buffer where the decrypted message is to
  *                                be written.
  * \param output_size             Size of the \c output buffer in bytes.
  * \param[out] output_length      On success, the number of bytes
  *                                that make up the returned output.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT
  *         \p alg is not a key agreement algorithm, or
  *         \p private_key is not compatible with \p alg,
  *         or \p peer_key is not valid for \p alg or not compatible with
  *         \p private_key.
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         \p output_size is too small
  * \retval #PSA_ERROR_NOT_SUPPORTED
  *         \p alg is not a supported key agreement algorithm.
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_raw_key_agreement(psa_algorithm_t alg,
                                    mbedtls_svc_key_id_t private_key,
                                    const uint8_t *peer_key,
                                    size_t peer_key_length,
                                    uint8_t *output,
                                    size_t output_size,
                                    size_t *output_length);
 
 /**@}*/
 
 /** \defgroup random Random generation
  * @{
  */
 
 /**
  * \brief Generate random bytes.
  *
  * \warning This function **can** fail! Callers MUST check the return status
  *          and MUST NOT use the content of the output buffer if the return
  *          status is not #PSA_SUCCESS.
  *
  * \note    To generate a key, use psa_generate_key() instead.
  *
  * \param[out] output       Output buffer for the generated data.
  * \param output_size       Number of bytes to generate and output.
  *
  * \retval #PSA_SUCCESS \emptydescription
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_generate_random(uint8_t *output,
                                  size_t output_size);
 
 /**
  * \brief Generate a key or key pair.
  *
  * The key is generated randomly.
  * Its location, usage policy, type and size are taken from \p attributes.
  *
  * Implementations must reject an attempt to generate a key of size 0.
  *
  * The following type-specific considerations apply:
  * - For RSA keys (#PSA_KEY_TYPE_RSA_KEY_PAIR),
  *   the public exponent is 65537.
  *   The modulus is a product of two probabilistic primes
  *   between 2^{n-1} and 2^n where n is the bit size specified in the
  *   attributes.
  *
  * \note This function is equivalent to calling psa_generate_key_custom()
  *       with the custom production parameters #PSA_CUSTOM_KEY_PARAMETERS_INIT
  *       and `custom_data_length == 0` (i.e. `custom_data` is empty).
  *
  * \param[in] attributes    The attributes for the new key.
  * \param[out] key          On success, an identifier for the newly created
  *                          key. For persistent keys, this is the key
  *                          identifier defined in \p attributes.
  *                          \c 0 on failure.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  *         If the key is persistent, the key material and the key's metadata
  *         have been saved to persistent storage.
  * \retval #PSA_ERROR_ALREADY_EXISTS
  *         This is an attempt to create a persistent key, and there is
  *         already a persistent key with the given identifier.
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_generate_key(const psa_key_attributes_t *attributes,
                               mbedtls_svc_key_id_t *key);
 
 /**
  * \brief Generate a key or key pair using custom production parameters.
  *
  * See the description of psa_generate_key() for the operation of this
  * function with the default production parameters. In addition, this function
  * supports the following production customizations, described in more detail
  * in the documentation of ::psa_custom_key_parameters_t:
  *
  * - RSA keys: generation with a custom public exponent.
  *
  * \note This function is experimental and may change in future minor
  *       versions of Mbed TLS.
  *
  * \param[in] attributes    The attributes for the new key.
  * \param[in] custom        Customization parameters for the key generation.
  *                          When this is #PSA_CUSTOM_KEY_PARAMETERS_INIT
  *                          with \p custom_data_length = 0,
  *                          this function is equivalent to
  *                          psa_generate_key().
  * \param[in] custom_data   Variable-length data associated with \c custom.
  * \param custom_data_length
  *                          Length of `custom_data` in bytes.
  * \param[out] key          On success, an identifier for the newly created
  *                          key. For persistent keys, this is the key
  *                          identifier defined in \p attributes.
  *                          \c 0 on failure.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  *         If the key is persistent, the key material and the key's metadata
  *         have been saved to persistent storage.
  * \retval #PSA_ERROR_ALREADY_EXISTS
  *         This is an attempt to create a persistent key, and there is
  *         already a persistent key with the given identifier.
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_generate_key_custom(const psa_key_attributes_t *attributes,
                                      const psa_custom_key_parameters_t *custom,
                                      const uint8_t *custom_data,
                                      size_t custom_data_length,
                                      mbedtls_svc_key_id_t *key);
 
 #ifndef __cplusplus
 /* Omitted when compiling in C++, because one of the parameters is a
  * pointer to a struct with a flexible array member, and that is not
  * standard C++.
  * https://github.com/Mbed-TLS/mbedtls/issues/9020
  */
 /**
  * \brief Generate a key or key pair using custom production parameters.
  *
  * \note
  * This is a deprecated variant of psa_key_derivation_output_key_custom().
  * It is equivalent except that the associated variable-length data
  * is passed in `params->data` instead of a separate parameter.
  * This function will be removed in a future version of Mbed TLS.
  *
  * \param[in] attributes    The attributes for the new key.
  * \param[in] params        Customization parameters for the key generation.
  *                          When this is #PSA_KEY_PRODUCTION_PARAMETERS_INIT
  *                          with \p params_data_length = 0,
  *                          this function is equivalent to
  *                          psa_generate_key().
  * \param params_data_length
  *                          Length of `params->data` in bytes.
  * \param[out] key          On success, an identifier for the newly created
  *                          key. For persistent keys, this is the key
  *                          identifier defined in \p attributes.
  *                          \c 0 on failure.
  *
  * \retval #PSA_SUCCESS
  *         Success.
  *         If the key is persistent, the key material and the key's metadata
  *         have been saved to persistent storage.
  * \retval #PSA_ERROR_ALREADY_EXISTS
  *         This is an attempt to create a persistent key, and there is
  *         already a persistent key with the given identifier.
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_generate_key_ext(const psa_key_attributes_t *attributes,
                                   const psa_key_production_parameters_t *params,
                                   size_t params_data_length,
                                   mbedtls_svc_key_id_t *key);
 #endif /* !__cplusplus */
 
 /**@}*/
 
 /** \defgroup interruptible_hash Interruptible sign/verify hash
  * @{
  */
 
 /** The type of the state data structure for interruptible hash
  *  signing operations.
  *
  * Before calling any function on a sign hash operation object, the
  * application must initialize it by any of the following means:
  * - Set the structure to all-bits-zero, for example:
  *   \code
  *   psa_sign_hash_interruptible_operation_t operation;
  *   memset(&operation, 0, sizeof(operation));
  *   \endcode
  * - Initialize the structure to logical zero values, for example:
  *   \code
  *   psa_sign_hash_interruptible_operation_t operation = {0};
  *   \endcode
  * - Initialize the structure to the initializer
  *   #PSA_SIGN_HASH_INTERRUPTIBLE_OPERATION_INIT, for example:
  *   \code
  *   psa_sign_hash_interruptible_operation_t operation =
  *   PSA_SIGN_HASH_INTERRUPTIBLE_OPERATION_INIT;
  *   \endcode
  * - Assign the result of the function
  *   psa_sign_hash_interruptible_operation_init() to the structure, for
  *   example:
  *   \code
  *   psa_sign_hash_interruptible_operation_t operation;
  *   operation = psa_sign_hash_interruptible_operation_init();
  *   \endcode
  *
  * This is an implementation-defined \c struct. Applications should not
  * make any assumptions about the content of this structure.
  * Implementation details can change in future versions without notice. */
 typedef struct psa_sign_hash_interruptible_operation_s psa_sign_hash_interruptible_operation_t;
 
 /** The type of the state data structure for interruptible hash
  *  verification operations.
  *
  * Before calling any function on a sign hash operation object, the
  * application must initialize it by any of the following means:
  * - Set the structure to all-bits-zero, for example:
  *   \code
  *   psa_verify_hash_interruptible_operation_t operation;
  *   memset(&operation, 0, sizeof(operation));
  *   \endcode
  * - Initialize the structure to logical zero values, for example:
  *   \code
  *   psa_verify_hash_interruptible_operation_t operation = {0};
  *   \endcode
  * - Initialize the structure to the initializer
  *   #PSA_VERIFY_HASH_INTERRUPTIBLE_OPERATION_INIT, for example:
  *   \code
  *   psa_verify_hash_interruptible_operation_t operation =
  *   PSA_VERIFY_HASH_INTERRUPTIBLE_OPERATION_INIT;
  *   \endcode
  * - Assign the result of the function
  *   psa_verify_hash_interruptible_operation_init() to the structure, for
  *   example:
  *   \code
  *   psa_verify_hash_interruptible_operation_t operation;
  *   operation = psa_verify_hash_interruptible_operation_init();
  *   \endcode
  *
  * This is an implementation-defined \c struct. Applications should not
  * make any assumptions about the content of this structure.
  * Implementation details can change in future versions without notice. */
 typedef struct psa_verify_hash_interruptible_operation_s psa_verify_hash_interruptible_operation_t;
 
 /**
  * \brief                       Set the maximum number of ops allowed to be
  *                              executed by an interruptible function in a
  *                              single call.
  *
  * \warning                     This is a beta API, and thus subject to change
  *                              at any point. It is not bound by the usual
  *                              interface stability promises.
  *
  * \note                        The time taken to execute a single op is
  *                              implementation specific and depends on
  *                              software, hardware, the algorithm, key type and
  *                              curve chosen. Even within a single operation,
  *                              successive ops can take differing amounts of
  *                              time. The only guarantee is that lower values
  *                              for \p max_ops means functions will block for a
  *                              lesser maximum amount of time. The functions
  *                              \c psa_sign_interruptible_get_num_ops() and
  *                              \c psa_verify_interruptible_get_num_ops() are
  *                              provided to help with tuning this value.
  *
  * \note                        This value defaults to
  *                              #PSA_INTERRUPTIBLE_MAX_OPS_UNLIMITED, which
  *                              means the whole operation will be done in one
  *                              go, regardless of the number of ops required.
  *
  * \note                        If more ops are needed to complete a
  *                              computation, #PSA_OPERATION_INCOMPLETE will be
  *                              returned by the function performing the
  *                              computation. It is then the caller's
  *                              responsibility to either call again with the
  *                              same operation context until it returns 0 or an
  *                              error code; or to call the relevant abort
  *                              function if the answer is no longer required.
  *
  * \note                        The interpretation of \p max_ops is also
  *                              implementation defined. On a hard real time
  *                              system, this can indicate a hard deadline, as a
  *                              real-time system needs a guarantee of not
  *                              spending more than X time, however care must be
  *                              taken in such an implementation to avoid the
  *                              situation whereby calls just return, not being
  *                              able to do any actual work within the allotted
  *                              time.  On a non-real-time system, the
  *                              implementation can be more relaxed, but again
  *                              whether this number should be interpreted as as
  *                              hard or soft limit or even whether a less than
  *                              or equals as regards to ops executed in a
  *                              single call is implementation defined.
  *
  * \note                        For keys in local storage when no accelerator
  *                              driver applies, please see also the
  *                              documentation for \c mbedtls_ecp_set_max_ops(),
  *                              which is the internal implementation in these
  *                              cases.
  *
  * \warning                     With implementations that interpret this number
  *                              as a hard limit, setting this number too small
  *                              may result in an infinite loop, whereby each
  *                              call results in immediate return with no ops
  *                              done (as there is not enough time to execute
  *                              any), and thus no result will ever be achieved.
  *
  * \note                        This only applies to functions whose
  *                              documentation mentions they may return
  *                              #PSA_OPERATION_INCOMPLETE.
  *
  * \param max_ops               The maximum number of ops to be executed in a
  *                              single call. This can be a number from 0 to
  *                              #PSA_INTERRUPTIBLE_MAX_OPS_UNLIMITED, where 0
  *                              is the least amount of work done per call.
  */
 void psa_interruptible_set_max_ops(uint32_t max_ops);
 
 /**
  * \brief                       Get the maximum number of ops allowed to be
  *                              executed by an interruptible function in a
  *                              single call. This will return the last
  *                              value set by
  *                              \c psa_interruptible_set_max_ops() or
  *                              #PSA_INTERRUPTIBLE_MAX_OPS_UNLIMITED if
  *                              that function has never been called.
  *
  * \warning                     This is a beta API, and thus subject to change
  *                              at any point. It is not bound by the usual
  *                              interface stability promises.
  *
  * \return                      Maximum number of ops allowed to be
  *                              executed by an interruptible function in a
  *                              single call.
  */
 uint32_t psa_interruptible_get_max_ops(void);
 
 /**
  * \brief                       Get the number of ops that a hash signing
  *                              operation has taken so far. If the operation
  *                              has completed, then this will represent the
  *                              number of ops required for the entire
  *                              operation. After initialization or calling
  *                              \c psa_sign_hash_interruptible_abort() on
  *                              the operation, a value of 0 will be returned.
  *
  * \note                        This interface is guaranteed re-entrant and
  *                              thus may be called from driver code.
  *
  * \warning                     This is a beta API, and thus subject to change
  *                              at any point. It is not bound by the usual
  *                              interface stability promises.
  *
  *                              This is a helper provided to help you tune the
  *                              value passed to \c
  *                              psa_interruptible_set_max_ops().
  *
  * \param operation             The \c psa_sign_hash_interruptible_operation_t
  *                              to use. This must be initialized first.
  *
  * \return                      Number of ops that the operation has taken so
  *                              far.
  */
 uint32_t psa_sign_hash_get_num_ops(
     const psa_sign_hash_interruptible_operation_t *operation);
 
 /**
  * \brief                       Get the number of ops that a hash verification
  *                              operation has taken so far. If the operation
  *                              has completed, then this will represent the
  *                              number of ops required for the entire
  *                              operation. After initialization or calling \c
  *                              psa_verify_hash_interruptible_abort() on the
  *                              operation, a value of 0 will be returned.
  *
  * \warning                     This is a beta API, and thus subject to change
  *                              at any point. It is not bound by the usual
  *                              interface stability promises.
  *
  *                              This is a helper provided to help you tune the
  *                              value passed to \c
  *                              psa_interruptible_set_max_ops().
  *
  * \param operation             The \c
  *                              psa_verify_hash_interruptible_operation_t to
  *                              use. This must be initialized first.
  *
  * \return                      Number of ops that the operation has taken so
  *                              far.
  */
 uint32_t psa_verify_hash_get_num_ops(
     const psa_verify_hash_interruptible_operation_t *operation);
 
 /**
  * \brief                       Start signing a hash or short message with a
  *                              private key, in an interruptible manner.
  *
  * \see                         \c psa_sign_hash_complete()
  *
  * \warning                     This is a beta API, and thus subject to change
  *                              at any point. It is not bound by the usual
  *                              interface stability promises.
  *
  * \note                        This function combined with \c
  *                              psa_sign_hash_complete() is equivalent to
  *                              \c psa_sign_hash() but
  *                              \c psa_sign_hash_complete() can return early and
  *                              resume according to the limit set with \c
  *                              psa_interruptible_set_max_ops() to reduce the
  *                              maximum time spent in a function call.
  *
  * \note                        Users should call \c psa_sign_hash_complete()
  *                              repeatedly on the same context after a
  *                              successful call to this function until \c
  *                              psa_sign_hash_complete() either returns 0 or an
  *                              error. \c psa_sign_hash_complete() will return
  *                              #PSA_OPERATION_INCOMPLETE if there is more work
  *                              to do. Alternatively users can call
  *                              \c psa_sign_hash_abort() at any point if they no
  *                              longer want the result.
  *
  * \note                        If this function returns an error status, the
  *                              operation enters an error state and must be
  *                              aborted by calling \c psa_sign_hash_abort().
  *
  * \param[in, out] operation    The \c psa_sign_hash_interruptible_operation_t
  *                              to use. This must be initialized first.
  *
  * \param key                   Identifier of the key to use for the operation.
  *                              It must be an asymmetric key pair. The key must
  *                              allow the usage #PSA_KEY_USAGE_SIGN_HASH.
  * \param alg                   A signature algorithm (\c PSA_ALG_XXX
  *                              value such that #PSA_ALG_IS_SIGN_HASH(\p alg)
  *                              is true), that is compatible with
  *                              the type of \p key.
  * \param[in] hash              The hash or message to sign.
  * \param hash_length           Size of the \p hash buffer in bytes.
  *
  * \retval #PSA_SUCCESS
  *         The operation started successfully - call \c psa_sign_hash_complete()
  *         with the same context to complete the operation
  *
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The key does not have the #PSA_KEY_USAGE_SIGN_HASH flag, or it does
  *         not permit the requested algorithm.
  * \retval #PSA_ERROR_BAD_STATE
  *         An operation has previously been started on this context, and is
  *         still in progress.
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_sign_hash_start(
     psa_sign_hash_interruptible_operation_t *operation,
     mbedtls_svc_key_id_t key, psa_algorithm_t alg,
     const uint8_t *hash, size_t hash_length);
 
 /**
  * \brief                       Continue and eventually complete the action of
  *                              signing a hash or short message with a private
  *                              key, in an interruptible manner.
  *
  * \see                         \c psa_sign_hash_start()
  *
  * \warning                     This is a beta API, and thus subject to change
  *                              at any point. It is not bound by the usual
  *                              interface stability promises.
  *
  * \note                        This function combined with \c
  *                              psa_sign_hash_start() is equivalent to
  *                              \c psa_sign_hash() but this function can return
  *                              early and resume according to the limit set with
  *                              \c psa_interruptible_set_max_ops() to reduce the
  *                              maximum time spent in a function call.
  *
  * \note                        Users should call this function on the same
  *                              operation object repeatedly until it either
  *                              returns 0 or an error. This function will return
  *                              #PSA_OPERATION_INCOMPLETE if there is more work
  *                              to do. Alternatively users can call
  *                              \c psa_sign_hash_abort() at any point if they no
  *                              longer want the result.
  *
  * \note                        When this function returns successfully, the
  *                              operation becomes inactive. If this function
  *                              returns an error status, the operation enters an
  *                              error state and must be aborted by calling
  *                              \c psa_sign_hash_abort().
  *
  * \param[in, out] operation    The \c psa_sign_hash_interruptible_operation_t
  *                              to use. This must be initialized first, and have
  *                              had \c psa_sign_hash_start() called with it
  *                              first.
  *
  * \param[out] signature        Buffer where the signature is to be written.
  * \param signature_size        Size of the \p signature buffer in bytes. This
  *                              must be appropriate for the selected
  *                              algorithm and key:
  *                              - The required signature size is
  *                                #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c
  *                                key_bits, \c alg) where \c key_type and \c
  *                                key_bits are the type and bit-size
  *                                respectively of key.
  *                              - #PSA_SIGNATURE_MAX_SIZE evaluates to the
  *                                maximum signature size of any supported
  *                                signature algorithm.
  * \param[out] signature_length On success, the number of bytes that make up
  *                              the returned signature value.
  *
  * \retval #PSA_SUCCESS
  *         Operation completed successfully
  *
  * \retval #PSA_OPERATION_INCOMPLETE
  *         Operation was interrupted due to the setting of \c
  *         psa_interruptible_set_max_ops(). There is still work to be done.
  *         Call this function again with the same operation object.
  *
  * \retval #PSA_ERROR_BUFFER_TOO_SMALL
  *         The size of the \p signature buffer is too small. You can
  *         determine a sufficient buffer size by calling
  *         #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \c alg)
  *         where \c key_type and \c key_bits are the type and bit-size
  *         respectively of \c key.
  *
  * \retval #PSA_ERROR_BAD_STATE
  *         An operation was not previously started on this context via
  *         \c psa_sign_hash_start().
  *
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has either not been previously initialized by
  *         psa_crypto_init() or you did not previously call
  *         psa_sign_hash_start() with this operation object. It is
  *         implementation-dependent whether a failure to initialize results in
  *         this error code.
  */
 psa_status_t psa_sign_hash_complete(
     psa_sign_hash_interruptible_operation_t *operation,
     uint8_t *signature, size_t signature_size,
     size_t *signature_length);
 
 /**
  * \brief                       Abort a sign hash operation.
  *
  * \warning                     This is a beta API, and thus subject to change
  *                              at any point. It is not bound by the usual
  *                              interface stability promises.
  *
  * \note                        This function is the only function that clears
  *                              the number of ops completed as part of the
  *                              operation. Please ensure you copy this value via
  *                              \c psa_sign_hash_get_num_ops() if required
  *                              before calling.
  *
  * \note                        Aborting an operation frees all associated
  *                              resources except for the \p operation structure
  *                              itself. Once aborted, the operation object can
  *                              be reused for another operation by calling \c
  *                              psa_sign_hash_start() again.
  *
  * \note                        You may call this function any time after the
  *                              operation object has been initialized. In
  *                              particular, calling \c psa_sign_hash_abort()
  *                              after the operation has already been terminated
  *                              by a call to \c psa_sign_hash_abort() or
  *                              psa_sign_hash_complete() is safe.
  *
  * \param[in,out] operation     Initialized sign hash operation.
  *
  * \retval #PSA_SUCCESS
  *         The operation was aborted successfully.
  *
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_sign_hash_abort(
     psa_sign_hash_interruptible_operation_t *operation);
 
 /**
  * \brief                       Start reading and verifying a hash or short
  *                              message, in an interruptible manner.
  *
  * \see                         \c psa_verify_hash_complete()
  *
  * \warning                     This is a beta API, and thus subject to change
  *                              at any point. It is not bound by the usual
  *                              interface stability promises.
  *
  * \note                        This function combined with \c
  *                              psa_verify_hash_complete() is equivalent to
  *                              \c psa_verify_hash() but \c
  *                              psa_verify_hash_complete() can return early and
  *                              resume according to the limit set with \c
  *                              psa_interruptible_set_max_ops() to reduce the
  *                              maximum time spent in a function.
  *
  * \note                        Users should call \c psa_verify_hash_complete()
  *                              repeatedly on the same operation object after a
  *                              successful call to this function until \c
  *                              psa_verify_hash_complete() either returns 0 or
  *                              an error. \c psa_verify_hash_complete() will
  *                              return #PSA_OPERATION_INCOMPLETE if there is
  *                              more work to do. Alternatively users can call
  *                              \c psa_verify_hash_abort() at any point if they
  *                              no longer want the result.
  *
  * \note                        If this function returns an error status, the
  *                              operation enters an error state and must be
  *                              aborted by calling \c psa_verify_hash_abort().
  *
  * \param[in, out] operation    The \c psa_verify_hash_interruptible_operation_t
  *                              to use. This must be initialized first.
  *
  * \param key                   Identifier of the key to use for the operation.
  *                              The key must allow the usage
  *                              #PSA_KEY_USAGE_VERIFY_HASH.
  * \param alg                   A signature algorithm (\c PSA_ALG_XXX
  *                              value such that #PSA_ALG_IS_SIGN_HASH(\p alg)
  *                              is true), that is compatible with
  *                              the type of \p key.
  * \param[in] hash              The hash whose signature is to be verified.
  * \param hash_length           Size of the \p hash buffer in bytes.
  * \param[in] signature         Buffer containing the signature to verify.
  * \param signature_length      Size of the \p signature buffer in bytes.
  *
  * \retval #PSA_SUCCESS
  *         The operation started successfully - please call \c
  *         psa_verify_hash_complete() with the same context to complete the
  *         operation.
  *
  * \retval #PSA_ERROR_BAD_STATE
  *         Another operation has already been started on this context, and is
  *         still in progress.
  *
  * \retval #PSA_ERROR_NOT_PERMITTED
  *         The key does not have the #PSA_KEY_USAGE_VERIFY_HASH flag, or it does
  *         not permit the requested algorithm.
  *
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_verify_hash_start(
     psa_verify_hash_interruptible_operation_t *operation,
     mbedtls_svc_key_id_t key, psa_algorithm_t alg,
     const uint8_t *hash, size_t hash_length,
     const uint8_t *signature, size_t signature_length);
 
 /**
  * \brief                       Continue and eventually complete the action of
  *                              reading and verifying a hash or short message
  *                              signed with a private key, in an interruptible
  *                              manner.
  *
  * \see                         \c psa_verify_hash_start()
  *
  * \warning                     This is a beta API, and thus subject to change
  *                              at any point. It is not bound by the usual
  *                              interface stability promises.
  *
  * \note                        This function combined with \c
  *                              psa_verify_hash_start() is equivalent to
  *                              \c psa_verify_hash() but this function can
  *                              return early and resume according to the limit
  *                              set with \c psa_interruptible_set_max_ops() to
  *                              reduce the maximum time spent in a function
  *                              call.
  *
  * \note                        Users should call this function on the same
  *                              operation object repeatedly until it either
  *                              returns 0 or an error. This function will return
  *                              #PSA_OPERATION_INCOMPLETE if there is more work
  *                              to do. Alternatively users can call
  *                              \c psa_verify_hash_abort() at any point if they
  *                              no longer want the result.
  *
  * \note                        When this function returns successfully, the
  *                              operation becomes inactive. If this function
  *                              returns an error status, the operation enters an
  *                              error state and must be aborted by calling
  *                              \c psa_verify_hash_abort().
  *
  * \param[in, out] operation    The \c psa_verify_hash_interruptible_operation_t
  *                              to use. This must be initialized first, and have
  *                              had \c psa_verify_hash_start() called with it
  *                              first.
  *
  * \retval #PSA_SUCCESS
  *         Operation completed successfully, and the passed signature is valid.
  *
  * \retval #PSA_OPERATION_INCOMPLETE
  *         Operation was interrupted due to the setting of \c
  *         psa_interruptible_set_max_ops(). There is still work to be done.
  *         Call this function again with the same operation object.
  *
  * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription
  * \retval #PSA_ERROR_INVALID_SIGNATURE
  *         The calculation was performed successfully, but the passed
  *         signature is not a valid signature.
  * \retval #PSA_ERROR_BAD_STATE
  *         An operation was not previously started on this context via
  *         \c psa_verify_hash_start().
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription
  * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription
  * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription
  * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription
  * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription
  * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription
  * \retval #PSA_ERROR_DATA_INVALID \emptydescription
  * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has either not been previously initialized by
  *         psa_crypto_init() or you did not previously call
  *         psa_verify_hash_start() on this object. It is
  *         implementation-dependent whether a failure to initialize results in
  *         this error code.
  */
 psa_status_t psa_verify_hash_complete(
     psa_verify_hash_interruptible_operation_t *operation);
 
 /**
  * \brief                     Abort a verify hash operation.
  *
  * \warning                   This is a beta API, and thus subject to change at
  *                            any point. It is not bound by the usual interface
  *                            stability promises.
  *
  * \note                      This function is the only function that clears the
  *                            number of ops completed as part of the operation.
  *                            Please ensure you copy this value via
  *                            \c psa_verify_hash_get_num_ops() if required
  *                            before calling.
  *
  * \note                      Aborting an operation frees all associated
  *                            resources except for the operation structure
  *                            itself. Once aborted, the operation object can be
  *                            reused for another operation by calling \c
  *                            psa_verify_hash_start() again.
  *
  * \note                      You may call this function any time after the
  *                            operation object has been initialized.
  *                            In particular, calling \c psa_verify_hash_abort()
  *                            after the operation has already been terminated by
  *                            a call to \c psa_verify_hash_abort() or
  *                            psa_verify_hash_complete() is safe.
  *
  * \param[in,out] operation   Initialized verify hash operation.
  *
  * \retval #PSA_SUCCESS
  *         The operation was aborted successfully.
  *
  * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription
  * \retval #PSA_ERROR_BAD_STATE
  *         The library has not been previously initialized by psa_crypto_init().
  *         It is implementation-dependent whether a failure to initialize
  *         results in this error code.
  */
 psa_status_t psa_verify_hash_abort(
     psa_verify_hash_interruptible_operation_t *operation);
 
 
 /**@}*/
 
 #ifdef __cplusplus
 }
 #endif
 
 /* The file "crypto_extra.h" contains vendor-specific definitions. This
  * can include vendor-defined algorithms, extra functions, etc. */
 #include "crypto_extra.h"
 
 #endif /* PSA_CRYPTO_H */