/* This file is part of TALER Copyright (C) 2014, 2015 Christian Grothoff (and other contributing authors) TALER is free software; you can redistribute it and/or modify it under the terms of the GNU Affero General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. TALER is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more details. You should have received a copy of the GNU Affero General Public License along with TALER; see the file COPYING. If not, If not, see */ /** * @file include/taler_mint_service.h * @brief C interface of libtalermint, a C library to use mint's HTTP API * @author Sree Harsha Totakura * @author Christian Grothoff */ #ifndef _TALER_MINT_SERVICE_H #define _TALER_MINT_SERVICE_H #include "taler_util.h" /* ********************* event loop *********************** */ /** * @brief Handle to this library context. This is where the * main event loop logic lives. */ struct TALER_MINT_Context; /** * Initialise a context. A context should be used for each thread and should * not be shared among multiple threads. * * @return the context, NULL on error (failure to initialize) */ struct TALER_MINT_Context * TALER_MINT_init (void); /** * Obtain the information for a select() call to wait until * #TALER_MINT_perform() is ready again. Note that calling * any other TALER_MINT-API may also imply that the library * is again ready for #TALER_MINT_perform(). * * Basically, a client should use this API to prepare for select(), * then block on select(), then call #TALER_MINT_perform() and then * start again until the work with the context is done. * * This function will NOT zero out the sets and assumes that @a max_fd * and @a timeout are already set to minimal applicable values. It is * safe to give this API FD-sets and @a max_fd and @a timeout that are * already initialized to some other descriptors that need to go into * the select() call. * * @param ctx context to get the event loop information for * @param read_fd_set will be set for any pending read operations * @param write_fd_set will be set for any pending write operations * @param except_fd_set is here because curl_multi_fdset() has this argument * @param max_fd set to the highest FD included in any set; * if the existing sets have no FDs in it, the initial * value should be "-1". (Note that `max_fd + 1` will need * to be passed to select().) * @param timeout set to the timeout in milliseconds (!); -1 means * no timeout (NULL, blocking forever is OK), 0 means to * proceed immediately with #TALER_MINT_perform(). */ void TALER_MINT_get_select_info (struct TALER_MINT_Context *ctx, fd_set *read_fd_set, fd_set *write_fd_set, fd_set *except_fd_set, int *max_fd, long *timeout); /** * Run the main event loop for the Taler interaction. * * @param ctx the library context */ void TALER_MINT_perform (struct TALER_MINT_Context *ctx); /** * Cleanup library initialisation resources. This function should be called * after using this library to cleanup the resources occupied during library's * initialisation. * * @param ctx the library context */ void TALER_MINT_fini (struct TALER_MINT_Context *ctx); /* ********************* /keys *********************** */ /** * List of possible options to be passed to * #TALER_MINT_connect(). */ enum TALER_MINT_Option { /** * Terminator (end of option list). */ TALER_MINT_OPTION_END = 0 }; /** * @brief Mint's signature key */ struct TALER_MINT_SigningPublicKey { /** * The signing public key */ struct TALER_MintPublicKeyP key; /** * Validity start time */ struct GNUNET_TIME_Absolute valid_from; /** * Validity expiration time */ struct GNUNET_TIME_Absolute valid_until; }; /** * @brief Public information about a mint's denomination key */ struct TALER_MINT_DenomPublicKey { /** * The public key */ struct TALER_DenominationPublicKey key; /** * Timestamp indicating when the denomination key becomes valid */ struct GNUNET_TIME_Absolute valid_from; /** * Timestamp indicating when the denomination key can’t be used anymore to * withdraw new coins. */ struct GNUNET_TIME_Absolute withdraw_valid_until; /** * Timestamp indicating when coins of this denomination become invalid. */ struct GNUNET_TIME_Absolute deposit_valid_until; /** * The value of this denomination */ struct TALER_Amount value; /** * The applicable fee for withdrawing a coin of this denomination */ struct TALER_Amount fee_withdraw; /** * The applicable fee to spend a coin of this denomination */ struct TALER_Amount fee_deposit; /** *The applicable fee to melt/refresh a coin of this denomination */ struct TALER_Amount fee_refresh; }; /** * @brief Information we get from the mint about auditors. */ struct TALER_MINT_AuditorInformation { /** * Public key of the auditing institution. */ struct TALER_AuditorPublicKeyP auditor_pub; /** * URL of the auditing institution. The application must check that * this is an acceptable auditor for its purpose and also verify * that the @a auditor_pub matches the auditor's public key given at * that website. We expect that in practice software is going to * often ship with an initial list of accepted auditors, just like * browsers ship with a CA root store. */ const char *auditor_url; /** * Number of denomination keys audited by this auditor. */ unsigned int num_denom_keys; /** * Array of length @a denom_keys with the denomination * keys audited by this auditor. Note that the array * elements point to the same locations as the entries * in the key's main `denom_keys` array. */ struct TALER_MINT_DenomPublicKey *const*denom_keys; }; /** * @brief Information about keys from the mint. */ struct TALER_MINT_Keys { /** * Long-term offline signing key of the mint. */ struct TALER_MasterPublicKeyP master_pub; /** * Array of the mint's online signing keys. */ struct TALER_MINT_SigningPublicKey *sign_keys; /** * Array of the mint's denomination keys. */ struct TALER_MINT_DenomPublicKey *denom_keys; /** * Array of the keys of the auditors of the mint. */ struct TALER_AuditorPublicKeyP *auditors; /** * Length of the @e sign_keys array. */ unsigned int num_sign_keys; /** * Length of the @e denom_keys array. */ unsigned int num_denom_keys; /** * Length of the @e auditors array. */ unsigned int num_auditors; }; /** * Function called with information about who is auditing * a particular mint and what key the mint is using. * * @param cls closure * @param keys information about the various keys used * by the mint */ typedef void (*TALER_MINT_CertificationCallback) (void *cls, const struct TALER_MINT_Keys *keys); /** * @brief Handle to the mint. This is where we interact with * a particular mint and keep the per-mint information. */ struct TALER_MINT_Handle; /** * Initialise a connection to the mint. Will connect to the * mint and obtain information about the mint's master public * key and the mint's auditor. The respective information will * be passed to the @a cert_cb once available, and all future * interactions with the mint will be checked to be signed * (where appropriate) by the respective master key. * * @param ctx the context * @param url HTTP base URL for the mint * @param cert_cb function to call with the mint's certification information * @param cert_cb_cls closure for @a cert_cb * @param ... list of additional arguments, terminated by #TALER_MINT_OPTION_END. * @return the mint handle; NULL upon error */ struct TALER_MINT_Handle * TALER_MINT_connect (struct TALER_MINT_Context *ctx, const char *url, TALER_MINT_CertificationCallback cert_cb, void *cert_cb_cls, ...); /** * Disconnect from the mint. * * @param mint the mint handle */ void TALER_MINT_disconnect (struct TALER_MINT_Handle *mint); /** * Obtain the keys from the mint. * * @param mint the mint handle * @return the mint's key set */ const struct TALER_MINT_Keys * TALER_MINT_get_keys (const struct TALER_MINT_Handle *mint); /** * Test if the given @a pub is a the current signing key from the mint * according to @a keys. * * @param keys the mint's key set * @param pub claimed current online signing key for the mint * @return #GNUNET_OK if @a pub is (according to /keys) a current signing key */ int TALER_MINT_test_signing_key (const struct TALER_MINT_Keys *keys, const struct TALER_MintPublicKeyP *pub); /** * Obtain the denomination key details from the mint. * * @param keys the mint's key set * @param pk public key of the denomination to lookup * @return details about the given denomination key */ const struct TALER_MINT_DenomPublicKey * TALER_MINT_get_denomination_key (const struct TALER_MINT_Keys *keys, const struct TALER_DenominationPublicKey *pk); /* ********************* /wire *********************** */ /** * @brief A Wire format inquiry handle */ struct TALER_MINT_WireHandle; /** * Callbacks of this type are used to serve the result of submitting a * wire format inquiry request to a mint. * * The callback is invoked multiple times, once for each supported @a * method. Finally, it is invoked one more time with cls/0/NULL/NULL * to indicate the end of the iteration. If any request fails to * generate a valid response from the mint, @a http_status will also * be zero and the iteration will also end. Thus, the iteration * always ends with a final call with an @a http_status of 0. If the * @a http_status is already 0 on the first call, then the response to * the /wire request was invalid. Later, clients can tell the * difference between @a http_status of 0 indicating a failed * /wire/method request and a regular end of the iteration by @a * method being non-NULL. If the mint simply correctly asserts that * it does not support any methods, @a method will be NULL but the @a * http_status will be #MHD_HTTP_OK for the first call (followed by a * cls/0/NULL/NULL call to signal the end of the iteration). * * @param cls closure * @param http_status HTTP response code, #MHD_HTTP_OK (200) for successful request; * 0 if the mint's reply is bogus (fails to follow the protocol) * @param method wire format method supported, i.e. "test" or "sepa", or NULL * if already the /wire request failed. * @param obj the received JSON reply, if successful this should be the wire * format details as provided by /wire/METHOD/, or NULL if the * reply was not in JSON format (in this case, the client might * want to do an HTTP request to /wire/METHOD/ with a browser to * provide more information to the user about the @a method). */ typedef void (*TALER_MINT_WireResultCallback) (void *cls, unsigned int http_status, const char *method, json_t *obj); /** * Obtain information about a mint's wire instructions. * A mint may provide wire instructions for creating * a reserve. The wire instructions also indicate * which wire formats merchants may use with the mint. * This API is typically used by a wallet for wiring * funds, and possibly by a merchant to determine * supported wire formats. * * Note that while we return the (main) response verbatim to the * caller for further processing, we do already verify that the * response is well-formed (i.e. that signatures included in the * response are all valid). If the mint's reply is not well-formed, * we return an HTTP status code of zero to @a cb. * * @param mint the mint handle; the mint must be ready to operate * @param wire_cb the callback to call when a reply for this request is available * @param wire_cb_cls closure for the above callback * @return a handle for this request */ struct TALER_MINT_WireHandle * TALER_MINT_wire (struct TALER_MINT_Handle *mint, TALER_MINT_WireResultCallback wire_cb, void *wire_cb_cls); /** * Cancel a wire information request. This function cannot be used * on a request handle if a response is already served for it. * * @param wh the wire information request handle */ void TALER_MINT_wire_cancel (struct TALER_MINT_WireHandle *wh); /* ********************* /deposit *********************** */ /** * @brief A Deposit Handle */ struct TALER_MINT_DepositHandle; /** * Callbacks of this type are used to serve the result of submitting a * deposit permission request to a mint. * * @param cls closure * @param http_status HTTP response code, #MHD_HTTP_OK (200) for successful deposit; * 0 if the mint's reply is bogus (fails to follow the protocol) * @param obj the received JSON reply, should be kept as proof (and, in case of errors, * be forwarded to the customer) */ typedef void (*TALER_MINT_DepositResultCallback) (void *cls, unsigned int http_status, json_t *obj); /** * Submit a deposit permission to the mint and get the mint's * response. This API is typically used by a merchant. Note that * while we return the response verbatim to the caller for further * processing, we do already verify that the response is well-formed * (i.e. that signatures included in the response are all valid). If * the mint's reply is not well-formed, we return an HTTP status code * of zero to @a cb. * * We also verify that the @a coin_sig is valid for this deposit * request, and that the @a ub_sig is a valid signature for @a * coin_pub. Also, the @a mint must be ready to operate (i.e. have * finished processing the /keys reply). If either check fails, we do * NOT initiate the transaction with the mint and instead return NULL. * * @param mint the mint handle; the mint must be ready to operate * @param amount the amount to be deposited * @param wire_details the merchant’s account details, in a format supported by the mint * @param h_contract hash of the contact of the merchant with the customer (further details are never disclosed to the mint) * @param coin_pub coin’s public key * @param denom_pub denomination key with which the coin is signed * @param denom_sig mint’s unblinded signature of the coin * @param timestamp timestamp when the contract was finalized, must match approximately the current time of the mint * @param transaction_id transaction id for the transaction between merchant and customer * @param merchant_pub the public key of the merchant (used to identify the merchant for refund requests) * @param refund_deadline date until which the merchant can issue a refund to the customer via the mint (can be zero if refunds are not allowed) * @param coin_sig the signature made with purpose #TALER_SIGNATURE_WALLET_COIN_DEPOSIT made by the customer with the coin’s private key. * @param cb the callback to call when a reply for this request is available * @param cb_cls closure for the above callback * @return a handle for this request; NULL if the inputs are invalid (i.e. * signatures fail to verify). In this case, the callback is not called. */ struct TALER_MINT_DepositHandle * TALER_MINT_deposit (struct TALER_MINT_Handle *mint, const struct TALER_Amount *amount, json_t *wire_details, const struct GNUNET_HashCode *h_contract, const struct TALER_CoinSpendPublicKeyP *coin_pub, const struct TALER_DenominationSignature *denom_sig, const struct TALER_DenominationPublicKey *denom_pub, struct GNUNET_TIME_Absolute timestamp, uint64_t transaction_id, const struct TALER_MerchantPublicKeyP *merchant_pub, struct GNUNET_TIME_Absolute refund_deadline, const struct TALER_CoinSpendSignatureP *coin_sig, TALER_MINT_DepositResultCallback cb, void *cb_cls); /** * Cancel a deposit permission request. This function cannot be used * on a request handle if a response is already served for it. * * @param deposit the deposit permission request handle */ void TALER_MINT_deposit_cancel (struct TALER_MINT_DepositHandle *deposit); /* ********************* /withdraw/status *********************** */ /** * @brief A /withdraw/status Handle */ struct TALER_MINT_WithdrawStatusHandle; /** * Ways how a reserve's balance may change. */ enum TALER_MINT_ReserveTransactionType { /** * Deposit into the reserve. */ TALER_MINT_RTT_DEPOSIT, /** * Withdrawal from the reserve. */ TALER_MINT_RTT_WITHDRAWAL }; /** * @brief Entry in the reserve's transaction history. */ struct TALER_MINT_ReserveHistory { /** * Type of the transaction. */ enum TALER_MINT_ReserveTransactionType type; /** * Amount transferred (in or out). */ struct TALER_Amount amount; /** * Details depending on @e type. */ union { /** * Transaction details for the incoming transaction. */ json_t *wire_in_details; /** * Signature authorizing the withdrawal for outgoing transaction. */ json_t *out_authorization_sig; } details; }; /** * Callbacks of this type are used to serve the result of submitting a * deposit permission request to a mint. * * @param cls closure * @param http_status HTTP response code, #MHD_HTTP_OK (200) for successful status request * 0 if the mint's reply is bogus (fails to follow the protocol) * @param[in] json original response in JSON format (useful only for diagnostics) * @param balance current balance in the reserve, NULL on error * @param history_length number of entries in the transaction history, 0 on error * @param history detailed transaction history, NULL on error */ typedef void (*TALER_MINT_WithdrawStatusResultCallback) (void *cls, unsigned int http_status, json_t *json, const struct TALER_Amount *balance, unsigned int history_length, const struct TALER_MINT_ReserveHistory *history); /** * Submit a request to obtain the transaction history of a reserve * from the mint. Note that while we return the full response to the * caller for further processing, we do already verify that the * response is well-formed (i.e. that signatures included in the * response are all valid and add up to the balance). If the mint's * reply is not well-formed, we return an HTTP status code of zero to * @a cb. * * @param mint the mint handle; the mint must be ready to operate * @param reserve_pub public key of the reserve to inspect * @param cb the callback to call when a reply for this request is available * @param cb_cls closure for the above callback * @return a handle for this request; NULL if the inputs are invalid (i.e. * signatures fail to verify). In this case, the callback is not called. */ struct TALER_MINT_WithdrawStatusHandle * TALER_MINT_withdraw_status (struct TALER_MINT_Handle *mint, const struct TALER_ReservePublicKeyP *reserve_pub, TALER_MINT_WithdrawStatusResultCallback cb, void *cb_cls); /** * Cancel a withdraw status request. This function cannot be used * on a request handle if a response is already served for it. * * @param wsh the withdraw status request handle */ void TALER_MINT_withdraw_status_cancel (struct TALER_MINT_WithdrawStatusHandle *wsh); /* ********************* /withdraw/sign *********************** */ /** * @brief A /withdraw/sign Handle */ struct TALER_MINT_WithdrawSignHandle; /** * Callbacks of this type are used to serve the result of submitting a * deposit permission request to a mint. * * @param cls closure * @param http_status HTTP response code, #MHD_HTTP_OK (200) for successful status request * 0 if the mint's reply is bogus (fails to follow the protocol) * @param sig signature over the coin, NULL on error * @param full_response full response from the mint (for logging, in case of errors) */ typedef void (*TALER_MINT_WithdrawSignResultCallback) (void *cls, unsigned int http_status, const struct TALER_DenominationSignature *sig, json_t *full_response); /** * Withdraw a coin from the mint using a /withdraw/sign request. This * API is typically used by a wallet. Note that to ensure that no * money is lost in case of hardware failures, the caller must have * committed (most of) the arguments to disk before calling, and be * ready to repeat the request with the same arguments in case of * failures. * * @param mint the mint handle; the mint must be ready to operate * @param pk kind of coin to create * @param reserve_priv private key of the reserve to withdraw from * @param coin_priv where to store the coin's private key, * caller must have committed this value to disk before the call (with @a pk) * @param blinding_key where to store the coin's blinding key * caller must have committed this value to disk before the call (with @a pk) * @param res_cb the callback to call when the final result for this request is available * @param res_cb_cls closure for @a res_cb * @return NULL * if the inputs are invalid (i.e. denomination key not with this mint). * In this case, the callback is not called. */ struct TALER_MINT_WithdrawSignHandle * TALER_MINT_withdraw_sign (struct TALER_MINT_Handle *mint, const struct TALER_MINT_DenomPublicKey *pk, const struct TALER_ReservePrivateKeyP *reserve_priv, const struct TALER_CoinSpendPrivateKeyP *coin_priv, const struct TALER_DenominationBlindingKey *blinding_key, TALER_MINT_WithdrawSignResultCallback res_cb, void *res_cb_cls); /** * Cancel a withdraw status request. This function cannot be used * on a request handle if a response is already served for it. * * @param sign the withdraw sign request handle */ void TALER_MINT_withdraw_sign_cancel (struct TALER_MINT_WithdrawSignHandle *sign); /* ********************* /refresh/melt+reveal ***************************** */ /** * Melt (partially spent) coins to obtain fresh coins that are * unlinkable to the original coin(s). Note that melting more * than one coin in a single request will make those coins linkable, * so the safest operation only melts one coin at a time. * * This API is typically used by a wallet. Note that to ensure that * no money is lost in case of hardware failures, is operation does * not actually initiate the request. Instead, it generates a buffer * which the caller must store before proceeding with the actual call * to #TALER_MINT_refresh_melt() that will generate the request. * * This function does verify that the given request data is internally * consistent. However, the @a melts_sigs are only verified if @a * check_sigs is set to #GNUNET_YES, as this may be relatively * expensive and should be redundant. * * Aside from some non-trivial cryptographic operations that might * take a bit of CPU time to complete, this function returns * its result immediately and does not start any asynchronous * processing. This function is also thread-safe. * * @param num_melts number of coins that are being melted (typically 1) * @param melt_privs array of @a num_melts private keys of the coins to melt * @param melt_amounts array of @a num_melts amounts specifying how much * each coin will contribute to the melt (including fee) * @param melt_sigs array of @a num_melts signatures affirming the * validity of the public keys corresponding to the * @a melt_privs private keys * @param melt_pks array of @a num_melts denomination key information * records corresponding to the @a melt_sigs * validity of the keys * @param check_sigs verify the validity of the signatures of @a melt_sigs * @param fresh_pks_len length of the @a pks array * @param fresh_pks array of @a pks_len denominations of fresh coins to create * @param[out] res_size set to the size of the return value, or 0 on error * @return NULL * if the inputs are invalid (i.e. denomination key not with this mint). * Otherwise, pointer to a buffer of @a res_size to store persistently * before proceeding to #TALER_MINT_refresh_melt(). * Non-null results should be freed using #GNUNET_free(). */ char * TALER_MINT_refresh_prepare (unsigned int num_melts, const struct TALER_CoinSpendPrivateKeyP *melt_privs, const struct TALER_Amount *melt_amounts, const struct TALER_DenominationSignature *melt_sigs, const struct TALER_MINT_DenomPublicKey *melt_pks, int check_sigs, unsigned int fresh_pks_len, const struct TALER_MINT_DenomPublicKey *fresh_pks, size_t *res_size); /* ********************* /refresh/melt ***************************** */ /** * @brief A /refresh/melt Handle */ struct TALER_MINT_RefreshMeltHandle; /** * Callbacks of this type are used to notify the application about the * result of the /refresh/melt stage. If successful, the @a noreveal_index * should be committed to disk prior to proceeding #TALER_MINT_refresh_reveal(). * * @param cls closure * @param http_status HTTP response code, never #MHD_HTTP_OK (200) as for successful intermediate response this callback is skipped. * 0 if the mint's reply is bogus (fails to follow the protocol) * @param noreveal_index choice by the mint in the cut-and-choose protocol, * UINT16_MAX on error * @param full_response full response from the mint (for logging, in case of errors) */ typedef void (*TALER_MINT_RefreshMeltCallback) (void *cls, unsigned int http_status, uint16_t noreveal_index, json_t *full_response); /** * Submit a melt request to the mint and get the mint's * response. * * This API is typically used by a wallet. Note that to ensure that * no money is lost in case of hardware failures, the provided * argument should have been constructed using * #TALER_MINT_refresh_prepare and committed to persistent storage * prior to calling this function. * * @param mint the mint handle; the mint must be ready to operate * @param refresh_data_length size of the @a refresh_data (returned * in the `res_size` argument from #TALER_MINT_refresh_prepare()) * @param refresh_data the refresh data as returned from #TALER_MINT_refresh_prepare()) * @param melt_cb the callback to call with the result * @param melt_cb_cls closure for @a melt_cb * @return a handle for this request; NULL if the argument was invalid. * In this case, neither callback will be called. */ struct TALER_MINT_RefreshMeltHandle * TALER_MINT_refresh_melt (struct TALER_MINT_Handle *mint, size_t refresh_data_length, const char *refresh_data, TALER_MINT_RefreshMeltCallback melt_cb, void *melt_cb_cls); /** * Cancel a refresh melt request. This function cannot be used * on a request handle if the callback was already invoked. * * @param rmh the refresh handle */ void TALER_MINT_refresh_melt_cancel (struct TALER_MINT_RefreshMeltHandle *rmh); /* ********************* /refresh/reveal ***************************** */ /** * Callbacks of this type are used to return the final result of * submitting a refresh request to a mint. If the operation was * successful, this function returns the signatures over the coins * that were remelted. The @a coin_privs and @a sigs arrays give the * coins in the same order (and should have the same length) in which * the original request specified the respective denomination keys. * * @param cls closure * @param http_status HTTP response code, #MHD_HTTP_OK (200) for successful status request * 0 if the mint's reply is bogus (fails to follow the protocol) * @param num_coins number of fresh coins created, length of the @a sigs and @a coin_privs arrays, 0 if the operation failed * @param coin_privs array of @a num_coins private keys for the coins that were created, NULL on error * @param sigs array of signature over @a num_coins coins, NULL on error * @param full_response full response from the mint (for logging, in case of errors) */ typedef void (*TALER_MINT_RefreshRevealCallback) (void *cls, unsigned int http_status, unsigned int num_coins, const struct TALER_CoinSpendPrivateKeyP *coin_privs, const struct TALER_DenominationSignature *sigs, json_t *full_response); /** * @brief A /refresh/reveal Handle */ struct TALER_MINT_RefreshRevealHandle; /** * Submit a /refresh/reval request to the mint and get the mint's * response. * * This API is typically used by a wallet. Note that to ensure that * no money is lost in case of hardware failures, the provided * arguments should have been committed to persistent storage * prior to calling this function. * * @param mint the mint handle; the mint must be ready to operate * @param refresh_data_length size of the @a refresh_data (returned * in the `res_size` argument from #TALER_MINT_refresh_prepare()) * @param refresh_data the refresh data as returned from #TALER_MINT_refresh_prepare()) * @param noreveal_index response from the mint to the * #TALER_MINT_refresh_melt() invocation * @param reveal_cb the callback to call with the final result of the * refresh operation * @param reveal_cb_cls closure for the above callback * @return a handle for this request; NULL if the argument was invalid. * In this case, neither callback will be called. */ struct TALER_MINT_RefreshRevealHandle * TALER_MINT_refresh_reveal (struct TALER_MINT_Handle *mint, size_t refresh_data_length, const char *refresh_data, uint16_t noreveal_index, TALER_MINT_RefreshRevealCallback reveal_cb, void *reveal_cb_cls); /** * Cancel a refresh reveal request. This function cannot be used * on a request handle if the callback was already invoked. * * @param rrh the refresh reval handle */ void TALER_MINT_refresh_reveal_cancel (struct TALER_MINT_RefreshRevealHandle *rrh); /* ********************* /refresh/link ***************************** */ /** * @brief A /refresh/link Handle */ struct TALER_MINT_RefreshLinkHandle; /** * Callbacks of this type are used to return the final result of * submitting a /refresh/link request to a mint. If the operation was * successful, this function returns the signatures over the coins * that were created when the original coin was melted. * * @param cls closure * @param http_status HTTP response code, #MHD_HTTP_OK (200) for successful status request * 0 if the mint's reply is bogus (fails to follow the protocol) * @param num_coins number of fresh coins created, length of the @a sigs and @a coin_privs arrays, 0 if the operation failed * @param coin_privs array of @a num_coins private keys for the coins that were created, NULL on error * @param sigs array of signature over @a num_coins coins, NULL on error * @param pubs array of public keys for the @a sigs, NULL on error * @param full_response full response from the mint (for logging, in case of errors) */ typedef void (*TALER_MINT_RefreshLinkCallback) (void *cls, unsigned int http_status, unsigned int num_coins, const struct TALER_CoinSpendPrivateKeyP *coin_privs, const struct TALER_DenominationSignature *sigs, const struct TALER_DenominationPublicKey *pubs, json_t *full_response); /** * Submit a link request to the mint and get the mint's response. * * This API is typically not used by anyone, it is more a threat * against those trying to receive a funds transfer by abusing the * /refresh protocol. * * @param mint the mint handle; the mint must be ready to operate * @param coin_priv private key to request link data for * @param link_cb the callback to call with the useful result of the * refresh operation the @a coin_priv was involved in (if any) * @param link_cb_cls closure for @a link_cb * @return a handle for this request */ struct TALER_MINT_RefreshLinkHandle * TALER_MINT_refresh_link (struct TALER_MINT_Handle *mint, const struct TALER_CoinSpendPrivateKeyP *coin_priv, TALER_MINT_RefreshLinkCallback link_cb, void *link_cb_cls); /** * Cancel a refresh link request. This function cannot be used * on a request handle if the callback was already invoked. * * @param rlh the refresh link handle */ void TALER_MINT_refresh_link_cancel (struct TALER_MINT_RefreshLinkHandle *rlh); /* ********************* /admin/add/incoming *********************** */ /** * @brief A /admin/add/incoming Handle */ struct TALER_MINT_AdminAddIncomingHandle; /** * Callbacks of this type are used to serve the result of submitting * information about an incoming transaction to a mint. * * @param cls closure * @param http_status HTTP response code, #MHD_HTTP_OK (200) for successful status request * 0 if the mint's reply is bogus (fails to follow the protocol) * @param full_response full response from the mint (for logging, in case of errors) */ typedef void (*TALER_MINT_AdminAddIncomingResultCallback) (void *cls, unsigned int http_status, json_t *full_response); /** * Notify the mint that we have received an incoming transaction * which fills a reserve. Note that this API is an administrative * API and thus not accessible to typical mint clients, but only * to the operators of the mint. * * @param mint the mint handle; the mint must be ready to operate * @param reserve_pub public key of the reserve * @param amount amount that was deposited * @param execution_date when did we receive the amount * @param wire wire details * @param res_cb the callback to call when the final result for this request is available * @param res_cb_cls closure for the above callback * @return NULL * if the inputs are invalid (i.e. invalid amount). * In this case, the callback is not called. */ struct TALER_MINT_AdminAddIncomingHandle * TALER_MINT_admin_add_incoming (struct TALER_MINT_Handle *mint, const struct TALER_ReservePublicKeyP *reserve_pub, const struct TALER_Amount *amount, struct GNUNET_TIME_Absolute execution_date, const json_t *wire, TALER_MINT_AdminAddIncomingResultCallback res_cb, void *res_cb_cls); /** * Cancel an add incoming. This function cannot be used on a request * handle if a response is already served for it. * * @param aai the admin add incoming request handle */ void TALER_MINT_admin_add_incoming_cancel (struct TALER_MINT_AdminAddIncomingHandle *aai); #endif /* _TALER_MINT_SERVICE_H */