From e6023a54b9b9718e172e5498b7c02f1a344fc67e Mon Sep 17 00:00:00 2001 From: Christian Grothoff Date: Mon, 17 Jul 2023 16:39:34 +0200 Subject: -work on auditor test --- src/auditor/test-auditor.sh | 330 +++++++++++++++++++++++++++----------------- 1 file changed, 201 insertions(+), 129 deletions(-) (limited to 'src/auditor/test-auditor.sh') diff --git a/src/auditor/test-auditor.sh b/src/auditor/test-auditor.sh index b9b7792d6..99f744a6d 100755 --- a/src/auditor/test-auditor.sh +++ b/src/auditor/test-auditor.sh @@ -1275,30 +1275,31 @@ function test_13() { COIN_PUB=$(echo "SELECT old_coin_pub FROM exchange.refresh_commitments LIMIT 1;" | psql "$DB" -Aqt) OLD_SIG=$(echo "SELECT old_coin_sig FROM exchange.refresh_commitments WHERE old_coin_pub='$COIN_PUB';" | psql "$DB" -Aqt) NEW_SIG="\xba588af7c13c477dca1ac458f65cc484db8fba53b969b873f4353ecbd815e6b4c03f42c0cb63a2b609c2d726e612fd8e0c084906a41f409b6a23a08a83c89a02" - echo "UPDATE exchange.refresh_commitments SET old_coin_sig='$NEW_SIG' WHERE old_coin_pub='$COIN_PUB'" | psql -Aqt "$DB" + echo "UPDATE exchange.refresh_commitments SET old_coin_sig='$NEW_SIG' WHERE old_coin_pub='$COIN_PUB'" \ + | psql -Aqt "$DB" run_audit echo -n "Testing inconsistency detection... " OP=$(jq -er .bad_sig_losses[0].operation < test-audit-coins.json) - if test x$OP != xmelt + if [ "$OP" != "melt" ] then exit_fail "Operation wrong, got $OP" fi LOSS=$(jq -er .bad_sig_losses[0].loss < test-audit-coins.json) TOTAL_LOSS=$(jq -er .irregular_loss < test-audit-coins.json) - if test x$LOSS != x$TOTAL_LOSS + if [ "$LOSS" != "$TOTAL_LOSS" ] then exit_fail "Loss inconsistent, got $LOSS and $TOTAL_LOSS" fi - if test x$TOTAL_LOSS = TESTKUDOS:0 + if [ "$TOTAL_LOSS" = "TESTKUDOS:0" ] then exit_fail "Loss zero" fi - echo PASS + echo "PASS" # cannot easily undo DELETE, hence full reload full_reload @@ -1314,22 +1315,23 @@ function test_14() { # actual outgoing wire transfers, so we need to run the # aggregator here. pre_audit aggregator - echo "UPDATE exchange.wire_fee SET wire_fee_frac=100;" | psql -Aqt "$DB" + echo "UPDATE exchange.wire_fee SET wire_fee_frac=100;" \ + | psql -Aqt "$DB" audit_only post_audit echo -n "Testing inconsistency detection... " TABLE=$(jq -r .row_inconsistencies[0].table < test-audit-aggregation.json) - if test "x$TABLE" != "xwire-fee" + if [ "$TABLE" != "wire-fee" ] then exit_fail "Reported table wrong: $TABLE" fi DIAG=$(jq -r .row_inconsistencies[0].diagnostic < test-audit-aggregation.json) - if test "x$DIAG" != "xwire fee signature invalid at given time" + if [ "$DIAG" != "wire fee signature invalid at given time" ] then exit_fail "Reported diagnostic wrong: $DIAG" fi - echo PASS + echo "PASS" # cannot easily undo aggregator, hence full reload full_reload @@ -1350,14 +1352,15 @@ function test_15() { echo -n "Testing inconsistency detection... " OP=$(jq -r .bad_sig_losses[0].operation < test-audit-coins.json) - if test "x$OP" != "xdeposit" + if [ "$OP" != "deposit" ] then exit_fail "Reported operation wrong: $OP" fi - echo PASS + echo "PASS" # Restore DB - echo "UPDATE exchange.deposits SET wire_salt='$SALT' WHERE deposit_serial_id=1;" | psql -Aqt "$DB" + echo "UPDATE exchange.deposits SET wire_salt='$SALT' WHERE deposit_serial_id=1;" \ + | psql -Aqt "$DB" } @@ -1375,64 +1378,66 @@ function test_16() { stop_libeufin OLD_AMOUNT=$(echo "SELECT amount FROM TalerRequestedPayments WHERE id='1';" | psql "${DB}") NEW_AMOUNT="TESTKUDOS:50" - echo "UPDATE TalerRequestedPayments SET amount='${NEW_AMOUNT}' WHERE id='1';" | psql "${DB}" + echo "UPDATE TalerRequestedPayments SET amount='${NEW_AMOUNT}' WHERE id='1';" \ + | psql "${DB}" launch_libeufin audit_only echo -n "Testing inconsistency detection... " AMOUNT=$(jq -r .wire_out_amount_inconsistencies[0].amount_justified < test-audit-wire.json) - if test "x$AMOUNT" != "x$OLD_AMOUNT" + if [ "$AMOUNT" != "$OLD_AMOUNT" ] then exit_fail "Reported justified amount wrong: $AMOUNT" fi AMOUNT=$(jq -r .wire_out_amount_inconsistencies[0].amount_wired < test-audit-wire.json) - if test "x$AMOUNT" != "x$NEW_AMOUNT" + if [ "$AMOUNT" != "$NEW_AMOUNT" ] then exit_fail "Reported wired amount wrong: $AMOUNT" fi TOTAL_AMOUNT=$(jq -r .total_wire_out_delta_minus < test-audit-wire.json) - if test "x$TOTAL_AMOUNT" != "xTESTKUDOS:0" + if [ "$TOTAL_AMOUNT" != "TESTKUDOS:0" ] then exit_fail "Reported total wired amount minus wrong: $TOTAL_AMOUNT" fi TOTAL_AMOUNT=$(jq -r .total_wire_out_delta_plus < test-audit-wire.json) - if test "x$TOTAL_AMOUNT" = "xTESTKUDOS:0" + if [ "$TOTAL_AMOUNT" = "TESTKUDOS:0" ] then exit_fail "Reported total wired amount plus wrong: $TOTAL_AMOUNT" fi - echo PASS + echo "PASS" stop_libeufin echo "Second modification: wire nothing" NEW_AMOUNT="TESTKUDOS:0" - echo "UPDATE TalerRequestedPayments SET amount='${NEW_AMOUNT}' WHERE id='1';" | psql "${DB}" + echo "UPDATE TalerRequestedPayments SET amount='${NEW_AMOUNT}' WHERE id='1';" \ + | psql "${DB}" launch_libeufin audit_only stop_libeufin echo -n "Testing inconsistency detection... " AMOUNT=$(jq -r .wire_out_amount_inconsistencies[0].amount_justified < test-audit-wire.json) - if test "x$AMOUNT" != "x$OLD_AMOUNT" + if [ "$AMOUNT" != "$OLD_AMOUNT" ] then exit_fail "Reported justified amount wrong: $AMOUNT" fi AMOUNT=$(jq -r .wire_out_amount_inconsistencies[0].amount_wired < test-audit-wire.json) - if test "x$AMOUNT" != "x$NEW_AMOUNT" + if [ "$AMOUNT" != "$NEW_AMOUNT" ] then exit_fail "Reported wired amount wrong: $AMOUNT" fi TOTAL_AMOUNT=$(jq -r .total_wire_out_delta_minus < test-audit-wire.json) - if test "x$TOTAL_AMOUNT" != "x$OLD_AMOUNT" + if [ "$TOTAL_AMOUNT" != "$OLD_AMOUNT" ] then exit_fail "Reported total wired amount minus wrong: $TOTAL_AMOUNT (wanted $OLD_AMOUNT)" fi TOTAL_AMOUNT=$(jq -r .total_wire_out_delta_plus < test-audit-wire.json) - if test "x$TOTAL_AMOUNT" != "xTESTKUDOS:0" + if [ "$TOTAL_AMOUNT" != "TESTKUDOS:0" ] then exit_fail "Reported total wired amount plus wrong: $TOTAL_AMOUNT" fi - echo PASS + echo "PASS" post_audit @@ -1455,27 +1460,27 @@ function test_17() { OLD_DATE=$(echo "SELECT preparationDate FROM PaymentInitiations WHERE id='${OLD_ID}';" | psql "${DB}") # Note: need - interval '1h' as "NOW()" may otherwise be exactly what is already in the DB # (due to rounding, if this machine is fast...) - NOW_1HR=$(expr $(date +%s) - 3600) + NOW_1HR=$(( $(date +%s) - 3600)) echo "UPDATE PaymentInitiations SET preparationDate='$NOW_1HR' WHERE id='${OLD_PREP}';" \ | psql "${DB}" launch_libeufin - echo DONE + echo "DONE" audit_only post_audit echo -n "Testing inconsistency detection... " TABLE=$(jq -r .row_minor_inconsistencies[0].table < test-audit-wire.json) - if test "x$TABLE" != "xwire_out" + if [ "$TABLE" != "wire_out" ] then exit_fail "Reported table wrong: $TABLE" fi DIAG=$(jq -r .row_minor_inconsistencies[0].diagnostic < test-audit-wire.json) DIAG=$(echo "$DIAG" | awk '{print $1 " " $2 " " $3}') - if test "x$DIAG" != "xexecution date mismatch" + if [ "$DIAG" != "execution date mismatch" ] then exit_fail "Reported diagnostic wrong: $DIAG" fi - echo PASS + echo "PASS" # cannot easily undo aggregator, hence full reload full_reload @@ -1488,34 +1493,42 @@ function test_17() { function test_18() { echo "===========18: emergency=================" - echo "DELETE FROM exchange.reserves_out;" | psql -Aqt "$DB" + echo "DELETE FROM exchange.reserves_out;" \ + | psql -Aqt "$DB" run_audit echo -n "Testing emergency detection... " - - jq -e .reserve_balance_summary_wrong_inconsistencies[0] < test-audit-reserves.json > /dev/null || exit_fail "Reserve balance inconsistency not detected" - - jq -e .emergencies[0] < test-audit-coins.json > /dev/null || exit_fail "Emergency not detected" - jq -e .emergencies_by_count[0] < test-audit-coins.json > /dev/null || exit_fail "Emergency by count not detected" - jq -e .amount_arithmetic_inconsistencies[0] < test-audit-coins.json > /dev/null || exit_fail "Escrow balance calculation impossibility not detected" - - echo PASS + jq -e .reserve_balance_summary_wrong_inconsistencies[0] \ + < test-audit-reserves.json \ + > /dev/null \ + || exit_fail "Reserve balance inconsistency not detected" + jq -e .emergencies[0] \ + < test-audit-coins.json \ + > /dev/null \ + || exit_fail "Emergency not detected" + jq -e .emergencies_by_count[0] \ + < test-audit-coins.json \ + > /dev/null \ + || exit_fail "Emergency by count not detected" + jq -e .amount_arithmetic_inconsistencies[0] \ + < test-audit-coins.json \ + > /dev/null \ + || exit_fail "Escrow balance calculation impossibility not detected" + echo "PASS" echo -n "Testing loss calculation... " - AMOUNT=$(jq -r .emergencies_loss < test-audit-coins.json) - if test "x$AMOUNT" == "xTESTKUDOS:0" + if [ "$AMOUNT" == "TESTKUDOS:0" ] then exit_fail "Reported amount wrong: $AMOUNT" fi AMOUNT=$(jq -r .emergencies_loss_by_count < test-audit-coins.json) - if test "x$AMOUNT" == "xTESTKUDOS:0" + if [ "$AMOUNT" == "TESTKUDOS:0" ] then exit_fail "Reported amount wrong: $AMOUNT" fi - - echo PASS + echo "PASS" # cannot easily undo broad DELETE operation, hence full reload full_reload @@ -1532,11 +1545,13 @@ function test_19() { RES_PUB=$(echo "SELECT reserve_pub FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql "$DB" -Aqt) OLD_EXP=$(echo "SELECT expiration_date FROM exchange.reserves WHERE reserve_pub='${RES_PUB}';" | psql "$DB" -Aqt) VAL_DELTA=1 - NEW_TIME=$(expr $OLD_TIME - 3024000000000 || true) # 5 weeks - NEW_EXP=$(expr $OLD_EXP - 3024000000000 || true) # 5 weeks - NEW_CREDIT=$(expr $OLD_VAL + $VAL_DELTA || true) - echo "UPDATE exchange.reserves_in SET execution_date='${NEW_TIME}',credit_val=${NEW_CREDIT} WHERE reserve_in_serial_id=1;" | psql -Aqt "$DB" - echo "UPDATE exchange.reserves SET current_balance_val=${VAL_DELTA}+current_balance_val,expiration_date='${NEW_EXP}' WHERE reserve_pub='${RES_PUB}';" | psql -Aqt "$DB" + NEW_TIME=$(( OLD_TIME - 3024000000000)) # 5 weeks + NEW_EXP=$(( OLD_EXP - 3024000000000)) # 5 weeks + NEW_CREDIT=$(( OLD_VAL + VAL_DELTA)) + echo "UPDATE exchange.reserves_in SET execution_date='${NEW_TIME}',credit_val=${NEW_CREDIT} WHERE reserve_in_serial_id=1;" \ + | psql -Aqt "$DB" + echo "UPDATE exchange.reserves SET current_balance_val=${VAL_DELTA}+current_balance_val,expiration_date='${NEW_EXP}' WHERE reserve_pub='${RES_PUB}';" \ + | psql -Aqt "$DB" # Need to run with the aggregator so the reserve closure happens run_audit aggregator @@ -1564,27 +1579,34 @@ function test_20() { OLD_TIME=$(echo "SELECT execution_date FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql "$DB" -Aqt) OLD_VAL=$(echo "SELECT credit_val FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql "$DB" -Aqt) RES_PUB=$(echo "SELECT reserve_pub FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql "$DB" -Aqt) - NEW_TIME=$(expr $OLD_TIME - 3024000000000 || true) # 5 weeks - NEW_CREDIT=$(expr $OLD_VAL + 100 || true) - echo "UPDATE exchange.reserves_in SET execution_date='${NEW_TIME}',credit_val=${NEW_CREDIT} WHERE reserve_in_serial_id=1;" | psql -Aqt "$DB" - echo "UPDATE exchange.reserves SET current_balance_val=100+current_balance_val WHERE reserve_pub='${RES_PUB}';" | psql -Aqt "$DB" + NEW_TIME=$(( OLD_TIME - 3024000000000 )) # 5 weeks + NEW_CREDIT=$(( OLD_VAL + 100 )) + echo "UPDATE exchange.reserves_in SET execution_date='${NEW_TIME}',credit_val=${NEW_CREDIT} WHERE reserve_in_serial_id=1;" \ + | psql -Aqt "$DB" + echo "UPDATE exchange.reserves SET current_balance_val=100+current_balance_val WHERE reserve_pub='${RES_PUB}';" \ + | psql -Aqt "$DB" # This time, run without the aggregator so the reserve closure is skipped! run_audit echo -n "Testing reserve closure missing detected... " - jq -e .reserve_not_closed_inconsistencies[0] < test-audit-reserves.json > /dev/null || exit_fail "Reserve not closed inconsistency not detected" + jq -e .reserve_not_closed_inconsistencies[0] \ + < test-audit-reserves.json \ + > /dev/null \ + || exit_fail "Reserve not closed inconsistency not detected" echo "PASS" AMOUNT=$(jq -r .total_balance_reserve_not_closed < test-audit-reserves.json) - if test "x$AMOUNT" == "xTESTKUDOS:0" + if [ "$AMOUNT" == "TESTKUDOS:0" ] then exit_fail "Reported total amount wrong: $AMOUNT" fi # Undo - echo "UPDATE exchange.reserves_in SET execution_date='${OLD_TIME}',credit_val=${OLD_VAL} WHERE reserve_in_serial_id=1;" | psql -Aqt "$DB" - echo "UPDATE exchange.reserves SET current_balance_val=current_balance_val-100 WHERE reserve_pub='${RES_PUB}';" | psql -Aqt "$DB" + echo "UPDATE exchange.reserves_in SET execution_date='${OLD_TIME}',credit_val=${OLD_VAL} WHERE reserve_in_serial_id=1;" \ + | psql -Aqt "$DB" + echo "UPDATE exchange.reserves SET current_balance_val=current_balance_val-100 WHERE reserve_pub='${RES_PUB}';" \ + | psql -Aqt "$DB" } @@ -1598,33 +1620,39 @@ function test_21() { RES_PUB=$(echo "SELECT reserve_pub FROM exchange.reserves_in WHERE reserve_in_serial_id=1;" | psql "$DB" -Aqt) OLD_EXP=$(echo "SELECT expiration_date FROM exchange.reserves WHERE reserve_pub='${RES_PUB}';" | psql "$DB" -Aqt) VAL_DELTA=1 - NEW_TIME=$(expr $OLD_TIME - 3024000000000 || true) # 5 weeks - NEW_EXP=$(expr $OLD_EXP - 3024000000000 || true) # 5 weeks - NEW_CREDIT=$(expr $OLD_VAL + $VAL_DELTA || true) - echo "UPDATE exchange.reserves_in SET execution_date='${NEW_TIME}',credit_val=${NEW_CREDIT} WHERE reserve_in_serial_id=1;" | psql -Aqt "$DB" - echo "UPDATE exchange.reserves SET current_balance_val=${VAL_DELTA}+current_balance_val,expiration_date='${NEW_EXP}' WHERE reserve_pub='${RES_PUB}';" | psql -Aqt "$DB" + NEW_TIME=$(( OLD_TIME - 3024000000000 )) # 5 weeks + NEW_EXP=$(( OLD_EXP - 3024000000000 )) # 5 weeks + NEW_CREDIT=$(( OLD_VAL + VAL_DELTA )) + echo "UPDATE exchange.reserves_in SET execution_date='${NEW_TIME}',credit_val=${NEW_CREDIT} WHERE reserve_in_serial_id=1;" \ + | psql -Aqt "$DB" + echo "UPDATE exchange.reserves SET current_balance_val=${VAL_DELTA}+current_balance_val,expiration_date='${NEW_EXP}' WHERE reserve_pub='${RES_PUB}';" \ + | psql -Aqt "$DB" # Need to first run the aggregator so the transfer is marked as done exists pre_audit aggregator stop_libeufin # remove transaction from bank DB # Currently emulating this (to be deleted): - echo "DELETE FROM TalerRequestedPayments WHERE amount='TESTKUDOS:${VAL_DELTA}'" | psql "${DB}" + echo "DELETE FROM TalerRequestedPayments WHERE amount='TESTKUDOS:${VAL_DELTA}'" \ + | psql "${DB}" launch_libeufin audit_only post_audit echo -n "Testing lack of reserve closure transaction detected... " - jq -e .reserve_lag_details[0] < test-audit-wire.json > /dev/null || exit_fail "Reserve closure lag not detected" + jq -e .reserve_lag_details[0] \ + < test-audit-wire.json \ + > /dev/null \ + || exit_fail "Reserve closure lag not detected" AMOUNT=$(jq -r .reserve_lag_details[0].amount < test-audit-wire.json) - if test "x$AMOUNT" != "xTESTKUDOS:${VAL_DELTA}" + if [ "$AMOUNT" != "TESTKUDOS:${VAL_DELTA}" ] then exit_fail "Reported total amount wrong: $AMOUNT" fi AMOUNT=$(jq -r .total_closure_amount_lag < test-audit-wire.json) - if test "x$AMOUNT" != "xTESTKUDOS:${VAL_DELTA}" + if [ "$AMOUNT" != "TESTKUDOS:${VAL_DELTA}" ] then exit_fail "Reported total amount wrong: $AMOUNT" fi @@ -1655,7 +1683,7 @@ function test_22() { echo -n "Testing inconsistency detection... " jq -e .denomination_key_validity_withdraw_inconsistencies[0] < test-audit-reserves.json > /dev/null || exit_fail "Denomination key withdraw inconsistency for $S_DENOM not detected" - echo PASS + echo "PASS" # Undo modification echo "UPDATE exchange.denominations SET expire_withdraw=${OLD_WEXP} WHERE denominations_serial='${S_DENOM}';" | psql -Aqt "$DB" @@ -1672,15 +1700,19 @@ function test_23() { pre_audit aggregator OLD_AMOUNT=$(echo "SELECT amount_frac FROM exchange.wire_out WHERE wireout_uuid=1;" | psql "$DB" -Aqt) - NEW_AMOUNT=$(expr $OLD_AMOUNT - 1000000 || true) - echo "UPDATE exchange.wire_out SET amount_frac=${NEW_AMOUNT} WHERE wireout_uuid=1;" | psql -Aqt "$DB" + NEW_AMOUNT=$(( OLD_AMOUNT - 1000000 )) + echo "UPDATE exchange.wire_out SET amount_frac=${NEW_AMOUNT} WHERE wireout_uuid=1;" \ + | psql -Aqt "$DB" audit_only post_audit echo -n "Testing inconsistency detection... " - jq -e .wire_out_inconsistencies[0] < test-audit-aggregation.json > /dev/null || exit_fail "Wire out inconsistency not detected" + jq -e .wire_out_inconsistencies[0] \ + < test-audit-aggregation.json \ + > /dev/null \ + || exit_fail "Wire out inconsistency not detected" ROW=$(jq .wire_out_inconsistencies[0].rowid < test-audit-aggregation.json) if [ "$ROW" != 1 ] @@ -1688,19 +1720,19 @@ function test_23() { exit_fail "Row wrong" fi AMOUNT=$(jq -r .total_wire_out_delta_plus < test-audit-aggregation.json) - if test "x$AMOUNT" != "xTESTKUDOS:0" + if [ "$AMOUNT" != "TESTKUDOS:0" ] then exit_fail "Reported amount wrong: $AMOUNT" fi AMOUNT=$(jq -r .total_wire_out_delta_minus < test-audit-aggregation.json) - if test "x$AMOUNT" != "xTESTKUDOS:0.01" + if [ "$AMOUNT" != "TESTKUDOS:0.01" ] then exit_fail "Reported total amount wrong: $AMOUNT" fi - echo PASS + echo "PASS" echo "Second pass: changing how amount is wrong to other direction" - NEW_AMOUNT=$(expr $OLD_AMOUNT + 1000000 || true) + NEW_AMOUNT=$(( OLD_AMOUNT + 1000000 )) echo "UPDATE exchange.wire_out SET amount_frac=${NEW_AMOUNT} WHERE wireout_uuid=1;" | psql -Aqt "$DB" pre_audit @@ -1717,16 +1749,16 @@ function test_23() { exit_fail "Row wrong" fi AMOUNT=$(jq -r .total_wire_out_delta_minus < test-audit-aggregation.json) - if test "x$AMOUNT" != "xTESTKUDOS:0" + if [ "$AMOUNT" != "TESTKUDOS:0" ] then exit_fail "Reported amount wrong: $AMOUNT" fi AMOUNT=$(jq -r .total_wire_out_delta_plus < test-audit-aggregation.json) - if test "x$AMOUNT" != "xTESTKUDOS:0.01" + if [ "$AMOUNT" != "TESTKUDOS:0.01" ] then exit_fail "Reported total amount wrong: $AMOUNT" fi - echo PASS + echo "PASS" # cannot easily undo aggregator, hence full reload full_reload @@ -1740,31 +1772,35 @@ function test_24() { echo "===========24: deposits missing ===========" # Modify denom_sig, so it is wrong CNT=$(echo "SELECT COUNT(*) FROM auditor.deposit_confirmations;" | psql -Aqt "$DB") - if test x$CNT = x0 + if [ "$CNT" = "0" ] then echo "Skipping deposits missing test: no deposit confirmations in database!" else echo "DELETE FROM exchange.deposits;" | psql -Aqt "$DB" - echo "DELETE FROM exchange.deposits WHERE deposit_serial_id=1;" | psql -Aqt "$DB" + echo "DELETE FROM exchange.deposits WHERE deposit_serial_id=1;" \ + | psql -Aqt "$DB" run_audit echo -n "Testing inconsistency detection... " - jq -e .deposit_confirmation_inconsistencies[0] < test-audit-deposits.json > /dev/null || exit_fail "Deposit confirmation inconsistency NOT detected" + jq -e .deposit_confirmation_inconsistencies[0] \ + < test-audit-deposits.json \ + > /dev/null \ + || exit_fail "Deposit confirmation inconsistency NOT detected" AMOUNT=$(jq -er .missing_deposit_confirmation_total < test-audit-deposits.json) - if test x$AMOUNT = xTESTKUDOS:0 + if [ "$AMOUNT" = "TESTKUDOS:0" ] then exit_fail "Expected non-zero total missing deposit confirmation amount" fi COUNT=$(jq -er .missing_deposit_confirmation_count < test-audit-deposits.json) - if test x$AMOUNT = x0 + if [ "$AMOUNT" = "0" ] then exit_fail "Expected non-zero total missing deposit confirmation count" fi - echo PASS + echo "PASS" # cannot easily undo DELETE, hence full reload full_reload @@ -1778,31 +1814,38 @@ function test_25() { echo "=========25: inconsistent coin history=========" # Drop refund, so coin history is bogus. - echo "DELETE FROM exchange.refunds WHERE refund_serial_id=1;" | psql -Aqt "$DB" + echo "DELETE FROM exchange.refunds WHERE refund_serial_id=1;" \ + | psql -Aqt "$DB" run_audit aggregator echo -n "Testing inconsistency detection... " - jq -e .coin_inconsistencies[0] < test-audit-aggregation.json > /dev/null || exit_fail "Coin inconsistency NOT detected" + jq -e .coin_inconsistencies[0] \ + < test-audit-aggregation.json \ + > /dev/null \ + || exit_fail "Coin inconsistency NOT detected" # Note: if the wallet withdrew much more than it spent, this might indeed # go legitimately unnoticed. - jq -e .emergencies[0] < test-audit-coins.json > /dev/null || exit_fail "Denomination value emergency NOT reported" + jq -e .emergencies[0] \ + < test-audit-coins.json \ + > /dev/null \ + || exit_fail "Denomination value emergency NOT reported" AMOUNT=$(jq -er .total_coin_delta_minus < test-audit-aggregation.json) - if test x$AMOUNT = xTESTKUDOS:0 + if [ "$AMOUNT" = "TESTKUDOS:0" ] then exit_fail "Expected non-zero total inconsistency amount from coins" fi # Note: if the wallet withdrew much more than it spent, this might indeed # go legitimately unnoticed. COUNT=$(jq -er .emergencies_risk_by_amount < test-audit-coins.json) - if test x$AMOUNT = xTESTKUDOS:0 + if [ "$COUNT" = "TESTKUDOS:0" ] then exit_fail "Expected non-zero emergency-by-amount" fi - echo PASS + echo "PASS" # cannot easily undo DELETE, hence full reload full_reload @@ -1829,7 +1872,7 @@ function test_26() { jq -e .bad_sig_losses[0] < test-audit-coins.json > /dev/null || exit_fail "Bad signature not detected" ROW=$(jq -e .bad_sig_losses[0].row < test-audit-coins.json) - if [ "$ROW" != ${SERIAL} ] + if [ "$ROW" != "${SERIAL}" ] then exit_fail "Row wrong, got $ROW" fi @@ -1866,11 +1909,10 @@ function test_27() { stop_libeufin # Obtain data to duplicate. WTID=$(echo SELECT wtid FROM TalerRequestedPayments WHERE id=1 | psql "${DB}") - echo WTID=$WTID OTHER_IBAN=$(echo -e "SELECT iban FROM BankAccounts WHERE label='fortytwo'" | psql "${DB}") # 'rawConfirmation' is set to 2 here, that doesn't # point to any record. That's only needed to set a non null value. - echo -e "INSERT INTO PaymentInitiations (bankAccount,preparationDate,submissionDate,sum,currency,endToEndId,paymentInformationId,instructionId,subject,creditorIban,creditorBic,creditorName,submitted,messageId,rawConfirmation) VALUES (1,$(date +%s),$(expr $(date +%s) + 2),10,'TESTKUDOS','NOTGIVEN','unused','unused','$WTID http://exchange.example.com/','$OTHER_IBAN','SANDBOXX','Forty Two','unused',1,2)" \ + echo -e "INSERT INTO PaymentInitiations (bankAccount,preparationDate,submissionDate,sum,currency,endToEndId,paymentInformationId,instructionId,subject,creditorIban,creditorBic,creditorName,submitted,messageId,rawConfirmation) VALUES (1,$(date +%s),$(( $(date +%s) + 2)),10,'TESTKUDOS','NOTGIVEN','unused','unused','$WTID http://exchange.example.com/','$OTHER_IBAN','SANDBOXX','Forty Two','unused',1,2)" \ | psql "${DB}" echo -e "INSERT INTO TalerRequestedPayments (facade,payment,requestUid,amount,exchangeBaseUrl,wtid,creditAccount) VALUES (1,2,'unused','TESTKUDOS:1','http://exchange.example.com/','$WTID','payto://iban/SANDBOXX/$OTHER_IBAN?receiver-name=Forty+Two')" \ | psql "${DB}" @@ -1881,13 +1923,13 @@ function test_27() { echo -n "Testing inconsistency detection... " AMOUNT=$(jq -r .wire_format_inconsistencies[0].amount < test-audit-wire.json) - if test "${AMOUNT}" != "TESTKUDOS:1" + if [ "${AMOUNT}" != "TESTKUDOS:1" ] then exit_fail "Amount wrong, got ${AMOUNT}" fi AMOUNT=$(jq -r .total_wire_format_amount < test-audit-wire.json) - if test "${AMOUNT}" != "TESTKUDOS:1" + if [ "${AMOUNT}" != "TESTKUDOS:1" ] then exit_fail "Wrong total wire format amount, got $AMOUNT" fi @@ -1926,7 +1968,7 @@ function test_28() { exit_fail "Wrong operation, got $OP" fi TAB=$(jq -r .row_inconsistencies[0].table < test-audit-aggregation.json) - if test $TAB != "deposit" + if [ "$TAB" != "deposit" ] then exit_fail "Wrong table for row inconsistency, got $TAB" fi @@ -1955,13 +1997,13 @@ function test_29() { echo -n "Testing inconsistency detection... " AMOUNT=$(jq -r .total_balance_summary_delta_minus < test-audit-reserves.json) - if test "x$AMOUNT" == "xTESTKUDOS:0" + if [ "$AMOUNT" == "TESTKUDOS:0" ] then exit_fail "Reported total amount wrong: $AMOUNT" fi PROFIT=$(jq -r .amount_arithmetic_inconsistencies[0].profitable < test-audit-coins.json) - if test "x$PROFIT" != "x-1" + if [ "$PROFIT" != "-1" ] then exit_fail "Reported wrong profitability: $PROFIT" fi @@ -1982,13 +2024,13 @@ function test_30() { run_audit echo -n "Testing inconsistency detection... " AMOUNT=$(jq -r .bad_sig_losses[0].loss < test-audit-coins.json) - if test "x$AMOUNT" == "xTESTKUDOS:0" + if [ "$AMOUNT" == "TESTKUDOS:0" ] then exit_fail "Reported total amount wrong: $AMOUNT" fi PROFIT=$(jq -r .amount_arithmetic_inconsistencies[0].profitable < test-audit-coins.json) - if test "x$PROFIT" != "x-1" + if [ "$PROFIT" != "-1" ] then exit_fail "Reported profitability wrong: $PROFIT" fi @@ -2012,13 +2054,13 @@ function test_31() { run_audit aggregator echo -n "Testing inconsistency detection... " AMOUNT=$(jq -r .irregular_loss < test-audit-coins.json) - if test "x$AMOUNT" == "xTESTKUDOS:0" + if [ "$AMOUNT" == "TESTKUDOS:0" ] then exit_fail "Reported total amount wrong: $AMOUNT" fi OP=$(jq -r --arg dep "deposit" '.bad_sig_losses[] | select(.operation == $dep) | .operation'< test-audit-coins.json | head -n1) - if test "x$OP" != "xdeposit" + if [ "$OP" != "deposit" ] then exit_fail "Reported wrong operation: $OP" fi @@ -2047,13 +2089,13 @@ function test_32() { echo -n "Testing inconsistency detection... " AMOUNT=$(jq -r .total_bad_sig_loss < test-audit-aggregation.json) - if test "x$AMOUNT" == "xTESTKUDOS:0" + if [ "$AMOUNT" == "TESTKUDOS:0" ] then exit_fail "Reported total amount wrong: $AMOUNT" fi OP=$(jq -r .bad_sig_losses[0].operation < test-audit-aggregation.json) - if test "x$OP" != "xwire" + if [ "$OP" != "wire" ] then exit_fail "Reported wrong operation: $OP" fi @@ -2172,19 +2214,31 @@ function test_33() { fi DRAINED=$(jq -r .total_drained < test-audit-wire.json) - if test $DRAINED != "TESTKUDOS:0.1" + if [ "$DRAINED" != "TESTKUDOS:0.1" ] then exit_fail "Wrong amount drained, got unexpected drain of $DRAINED" fi - jq -e .amount_arithmetic_inconsistencies[0] < test-audit-aggregation.json > /dev/null && exit_fail "Unexpected arithmetic inconsistencies from aggregations detected in ordinary run" - jq -e .amount_arithmetic_inconsistencies[0] < test-audit-coins.json > /dev/null && exit_fail "Unexpected arithmetic inconsistencies from coins detected in ordinary run" - jq -e .amount_arithmetic_inconsistencies[0] < test-audit-reserves.json > /dev/null && exit_fail "Unexpected arithmetic inconsistencies from reserves detected in ordinary run" - echo PASS + jq -e .amount_arithmetic_inconsistencies[0] \ + < test-audit-aggregation.json \ + > /dev/null \ + && exit_fail "Unexpected arithmetic inconsistencies from aggregations detected in ordinary run" + jq -e .amount_arithmetic_inconsistencies[0] \ + < test-audit-coins.json \ + > /dev/null \ + && exit_fail "Unexpected arithmetic inconsistencies from coins detected in ordinary run" + jq -e .amount_arithmetic_inconsistencies[0] \ + < test-audit-reserves.json \ + > /dev/null \ + && exit_fail "Unexpected arithmetic inconsistencies from reserves detected in ordinary run" + echo "PASS" echo -n "Checking for unexpected wire out differences " - jq -e .wire_out_inconsistencies[0] < test-audit-aggregation.json > /dev/null && exit_fail "Unexpected wire out inconsistencies detected in ordinary run" - echo PASS + jq -e .wire_out_inconsistencies[0] \ + < test-audit-aggregation.json \ + > /dev/null \ + && exit_fail "Unexpected wire out inconsistencies detected in ordinary run" + echo "PASS" # cannot easily undo aggregator, hence full reload full_reload @@ -2202,11 +2256,16 @@ function check_with_database() BASEDB="$1" CONF="$1.conf" ORIGIN=$(pwd) - MY_TMP_DIR=$(dirname $1) + MY_TMP_DIR=$(dirname "$1") echo "Running test suite with database $BASEDB using configuration $CONF" MASTER_PRIV_FILE="${BASEDB}.mpriv" - taler-config -f -c "${CONF}" -s exchange-offline -o MASTER_PRIV_FILE -V ${MASTER_PRIV_FILE} - MASTER_PUB=$(gnunet-ecc -p $MASTER_PRIV_FILE) + taler-config \ + -f \ + -c "${CONF}" \ + -s exchange-offline \ + -o MASTER_PRIV_FILE \ + -V "${MASTER_PRIV_FILE}" + MASTER_PUB=$(gnunet-ecc -p "$MASTER_PRIV_FILE") echo "MASTER PUB is ${MASTER_PUB} using file ${MASTER_PRIV_FILE}" @@ -2217,7 +2276,7 @@ function check_with_database() fail=0 for i in $TESTS do - test_$i + "test_$i" if test 0 != $fail then break @@ -2253,24 +2312,30 @@ taler-wallet-cli -h >/dev/null /dev/null || exit_skip "taler-wallet echo -n "Testing for Postgres" # Available directly in path? INITDB_BIN=$(command -v initdb) || true -if [[ ! -z "$INITDB_BIN" ]]; then - echo " FOUND (in path) at" $INITDB_BIN +if [[ -n "$INITDB_BIN" ]]; then + echo " FOUND (in path) at $INITDB_BIN" else - HAVE_INITDB=$(find /usr -name "initdb" | head -1 2> /dev/null | grep postgres) || exit_skip " MISSING" - echo " FOUND at" $(dirname $HAVE_INITDB) - INITDB_BIN=$(echo $HAVE_INITDB | grep bin/initdb | grep postgres | sort -n | tail -n1) + HAVE_INITDB=$(find /usr -name "initdb" | head -1 2> /dev/null | grep postgres) \ + || exit_skip " MISSING" + echo " FOUND at $(dirname "$HAVE_INITDB")" + INITDB_BIN=$(echo "$HAVE_INITDB" | grep bin/initdb | grep postgres | sort -n | tail -n1) fi -POSTGRES_PATH=$(dirname $INITDB_BIN) +POSTGRES_PATH=$(dirname "$INITDB_BIN") MYDIR=$(mktemp -d /tmp/taler-auditor-basedbXXXXXX) echo "Using $MYDIR for logging and temporary data" TMPDIR="$MYDIR/postgres/" -mkdir -p $TMPDIR +mkdir -p "$TMPDIR" echo -n "Setting up Postgres DB at $TMPDIR ..." -$INITDB_BIN --no-sync --auth=trust -D ${TMPDIR} > ${MYDIR}/postgres-dbinit.log 2> ${MYDIR}/postgres-dbinit.err +$INITDB_BIN \ + --no-sync \ + --auth=trust \ + -D "${TMPDIR}" \ + > "${MYDIR}/postgres-dbinit.log" \ + 2> "${MYDIR}/postgres-dbinit.err" echo "DONE" -mkdir ${TMPDIR}/sockets +mkdir "${TMPDIR}/sockets" echo -n "Launching Postgres service" -cat - >> $TMPDIR/postgresql.conf <> "$TMPDIR/postgresql.conf" < $TMPDIR/pg_hba.conf.new -mv $TMPDIR/pg_hba.conf.new $TMPDIR/pg_hba.conf -${POSTGRES_PATH}/pg_ctl -D $TMPDIR -l /dev/null start > ${MYDIR}/postgres-start.log 2> ${MYDIR}/postgres-start.err +grep -v host \ + < "$TMPDIR/pg_hba.conf" \ + > "$TMPDIR/pg_hba.conf.new" +mv "$TMPDIR/pg_hba.conf.new" "$TMPDIR/pg_hba.conf" +"${POSTGRES_PATH}/pg_ctl" \ + -D "$TMPDIR" \ + -l /dev/null \ + start \ + > "${MYDIR}/postgres-start.log" \ + 2> "${MYDIR}/postgres-start.err" echo " DONE" PGHOST="$TMPDIR/sockets" export PGHOST @@ -2301,12 +2373,12 @@ echo "Generating fresh database at $MYDIR" if faketime -f '-1 d' ./generate-auditor-basedb.sh "$MYDIR/$DB" then check_with_database "$MYDIR/$DB" - if test x$fail != x0 + if [ "$fail" != "0" ] then - exit $fail + exit "$fail" else echo "Cleaning up $MYDIR..." - rm -rf $MYDIR || echo "Removing $MYDIR failed" + rm -rf "$MYDIR" || echo "Removing $MYDIR failed" fi else echo "Generation failed" -- cgit v1.2.3