.. target audience: operator, developer

LibEuFin How-To
###############

.. contents:: Table of Contents

The LibEuFin Nexus is a Web service that provides a JSON abstraction layer to
access bank accounts.  It does **not** itself offer banking services, but is a
translator between JSON requests and other banking protocols (such as EBICS),
that are offered by banks.

This document explains how to set up Nexus to access a bank account
via the EBICS protocol.

In order to follow all the steps below, the reader should either
have access to a bank account with EBICS support or follow the
steps in :ref:`Configuring the Sandbox <configuring-the-sandbox>`.


Installing LibEuFin
===================

Installation on Debian
----------------------

.. include:: ../frags/installing-debian.rst

To install LibEuFin, you can now simply run:

.. code-block:: console

   # apt install libeufin

Administration via SystemD
--------------------------

After the Debian installation, the installed unit files
should be listed by the following command:

.. code-block:: console

   # systemctl list-unit-files | egrep '(nexus|sandbox)'

Both ``nexus.service`` and ``sandbox.service`` should appear.

At this point, the services can be started on boot:

.. code-block:: console

   # systemctl enable libeufin-nexus # use 'disable' to rollback
   # systemctl enable libeufin-sandbox # only if you want the sandbox

Or just manually:

.. code-block:: console

   # systemctl start libeufin-nexus # use 'stop' to terminate.
   # systemctl start libeufin-sandbox # only if you want the sandbox

The following command should inform the user about the status
of the running / terminated service:

.. code-block:: console

   # systemctl status libeufin-nexus

For more diagnostics, use:

.. code-block:: console

   # journalctl -u libeufin-nexus

Run-time dependencies
---------------------

LibEuFin has the following run-time dependencies:

* OpenJDK 11
* Python 3.8
* python3-click (can be installed via ``pip3 install click``)
* python3-requests (can be installed via ``pip3 install requests``)

These dependencies only need to be installed manually when building from source
or using the prebuilt binaries.

Downloading prebuilt binaries
-----------------------------

Pre-built packages can be obtained from the `taler.net website
<https://taler.net/files/libeufin>`__.

Unpack the ``libeufin-$version.zip`` file to
your desired location (typically ``/opt`` or ``~/opt``) and make sure that your ``PATH``
environment variable contains the ``bin/`` directory of the unpacked archive.

Building from source
--------------------

Nexus belongs to the LibEuFin project, and can be downloaded via Git:

.. code-block:: console

  $ git clone git://git.taler.net/libeufin

Note that Kotlin and Gradle should already work on the host system.

Navigate into the *libeufin* local repository, and from top-level run:

.. code-block:: console

  $ ./bootstrap
  $ ./configure --prefix=$PREFIX
  $ make install

Verifying your installation
---------------------------

In case of success, the three following commands should be found:

.. code-block:: console

  $ which libeufin-nexus
  $ which libeufin-sandbox
  $ which libeufin-cli


.. _configuring-the-sandbox:

Configuring the Sandbox (Optional)
==================================

If you don't have access to a real bank account with an EBICS API, you can set
up the sandbox.  The sandbox is a simplistic and incomplete implementation of a
core banking system with EBICS access to bank accounts.

The sandbox uses HTTP Basic auth, with username ``admin``.
Choose a password and set env var ``LIBEUFIN_SANDBOX_ADMIN_PASSWORD`` to it.

The sandbox relies on a database, which you must specify using a JDBC
connection URI with the ``LIBEUFIN_SANDBOX_DB_CONNECTION`` environment
variable, before invoking any commands.
If this variable is not set, ``libeufin-sandbox`` complains and exits:

.. code-block:: console

  $ export LIBEUFIN_SANDBOX_ADMIN_PASSWORD=secret
  $ libeufin-sandbox serve
  DB connection string not found/valid in the env variable LIBEUFIN_SANDBOX_DB_CONNECTION.
  The following two examples are valid connection strings:
  jdbc:sqlite:/tmp/libeufindb.sqlite3
  jdbc:postgresql://localhost:5432/libeufindb?user=Foo&password=secret

Only *SQLite* and *PostgreSQL (via TCP)* are supported right now.

Before being usable, a Sandbox needs to be configured.  This is done
by creating the `default` demobank.  A demobank is a set of configuration
values associated to one name; in the example below, we'll create one
named `default`, that is mandatory to have.

.. note::

   By design, many demobanks can be hosted by one running Sandbox,
   although at the time of writing only the 'default' one is supported.

A default demobank having the EUR currency is created with the following command:

.. code-block:: console

   $ export LIBEUFIN_SANDBOX_DB_CONNECTION=jdbc:sqlite:/tmp/libeufintestdb
   $ libeufin-sandbox config --currency EUR default

In order to use Taler, a default exchange needs to be configured.

.. code-block:: console

   $ export LIBEUFIN_SANDBOX_DB_CONNECTION=jdbc:sqlite:/tmp/libeufintestdb
   $ libeufin-sandbox default-exchange --demobank default $exchange_base_url $exchange_payto_address

The sandbox service can now be started with the following command:

.. code-block:: console

   $ export LIBEUFIN_SANDBOX_ADMIN_PASSWORD=secret
   $ export LIBEUFIN_SANDBOX_DB_CONNECTION=jdbc:sqlite:/tmp/libeufintestdb
   $ libeufin-sandbox serve --port 5016

The instructions below hook Nginx to the Sandbox:

.. code-block:: console

  redirect / to /demobanks/default;
  rewrite ^/$ https://$host/demobanks/default; 
  location / {
    proxy_set_header Host $host;
    proxy_set_header X-Forwarded-Host $host;
    proxy_set_header X-Forwarded-Proto "https";
    proxy_set_header X-Forwarded-Prefix "/";
    proxy_pass http://localhost:5016/; 
  }

To reset the state of the sandbox, delete the database.

For invocations of the LibEuFin command-line interface tool (``libeufin-cli``),
the following environment variables must be set to the authentication
information, and the URL of the sandbox service:

.. code-block:: console

   $ export LIBEUFIN_SANDBOX_USERNAME=admin
   $ export LIBEUFIN_SANDBOX_PASSWORD=secret
   $ export LIBEUFIN_SANDBOX_URL=http://localhost:5016

Note that the password is the same as for ``LIBEUFIN_SANDBOX_ADMIN_PASSWORD``.
Verify that the sandbox is running:

.. code-block:: console

   $ libeufin-cli sandbox check
   Hello, this is the Sandbox

Now an EBICS host can be created:

.. code-block:: console

   $ libeufin-cli sandbox ebicshost create --host-id testhost
   $ libeufin-cli sandbox ebicshost list
   {
     "ebicsHosts" : [ "testhost" ]
   }

Note that most ``libeufin-cli`` subcommands will ask for input interactively if
the respective value is not specified on the command line.

Next, register a user.  For the ``libeufin-cli sandbox demobank register``
command, the ``LIBEUFIN_SANDBOX_USERNAME`` and ``LIBEUFIN_SANDBOX_PASSWORD``
are assumed to be ``jrluser`` and ``easy``, respectively.
Also, the URL for all ``libeufin-cli sandbox demobank`` commands
must include the name of a bank, as follows:

.. code-block:: console

   $ export LIBEUFIN_SANDBOX_USERNAME=jrluser
   $ export LIBEUFIN_SANDBOX_PASSWORD=easy
   $ libeufin-cli sandbox \
      --sandbox-url http://localhost:5016/demobanks/default \
      demobank register

In this example, the bank name is ``default``.  In these examples, we use the
``--sandbox-url`` option for the ``demobank`` commands, so that we don't need
to change the environment variable ``LIBEUFIN_SANDBOX_URL`` for the
non-``demobank`` commands.

Check the balance of the user just created:

.. code-block:: console

   $ libeufin-cli sandbox \
      --sandbox-url http://localhost:5016/demobanks/default \
      demobank info --bank-account jrluser

With a user registered, we can now create an EBICS subscriber (identified by
the partner ID and user ID) for the host.  This command requires admin
priveleges, so ``LIBEUFIN_SANDBOX_USERNAME`` and ``LIBEUFIN_SANDBOX_PASSWORD``
are reset back to ``admin`` and ``secret``, respectively.

.. The plan is to replace the ‘sandbox ebicssubscriber list’ command
   below with a ‘sandbox demobank show-ebicssubscriber’ command.
   Need to implement it first!

.. code-block:: console

   $ export LIBEUFIN_SANDBOX_USERNAME=admin
   $ export LIBEUFIN_SANDBOX_PASSWORD=secret
   $ libeufin-cli sandbox \
      --sandbox-url http://localhost:5016/demobanks/default \
      demobank new-ebicssubscriber \
      --host-id testhost \
      --partner-id partner01 \
      --user-id user02 \
      --bank-account jrluser
   $ libeufin-cli sandbox ebicssubscriber list
   {
     "subscribers" : [ {
       "hostID" : "testhost",
       "partnerID" : "partner01",
       "userID" : "user02",
       "systemID" : null,
       "demobankAccountLabel" : "jrluser"
     } ]
   }

The ``libeufin-cli sandbox demobank new-ebicssubscriber`` command
also creates an associated bank account.  You can see it with command:

.. code-block:: console

   $ libeufin-cli sandbox bankaccount list
   [ {
     "label" : "bank",
     "name" : "Bank account owner's name",
     "iban" : "DE895351",
     "bic" : "SANDBOXX"
   }, {
     "label" : "jrluser",
     "name" : "Bank account owner's name",
     "iban" : "DE724881",
     "bic" : "SANDBOXX"
   } ]

The account name ``jrluser`` is the unique identifier of the account within
the sandbox.  The EBICS parameters identify the subscriber that should have
access to the bank account via EBICS.

.. note::

  Currently, the person (given human) name is not maintained by
  the sandbox.  It displays "Bank account owner's name" instead.

The account already has one transaction, the "Sign-up bonus" from the bank.
Note that in the following examples we transition to using the ``bankaccount``
subcommand, because there is no need to rely on EBICS:

.. code-block:: console

   $ libeufin-cli sandbox bankaccount transactions jrluser
   {
     "payments" : [ {
       "accountLabel" : "jrluser",
       "creditorIban" : "DE724881",
       "creditorBic" : "SANDBOXX",
       "creditorName" : "Unknown",
       "debtorIban" : "DE895351",
       "debtorBic" : "SANDBOXX",
       "debtorName" : "The Bank",
       "amount" : "100",
       "currency" : "EUR",
       "subject" : "Sign-up bonus",
       "date" : "Tue, 22 Feb 2022 00:04:15 GMT",
       "creditDebitIndicator" : "credit",
       "accountServicerReference" : "2NG75I0O",
       "paymentInformationId" : null
     } ]
   }

To populate the account with some more transactions, run the following command:

.. code-block:: console

   $ libeufin-cli sandbox bankaccount generate-transactions jrluser

.. code-block:: console

   $ libeufin-cli sandbox bankaccount simulate-incoming-transaction jrluser \
       --debtor-iban DE06500105174526623718 \
       --debtor-bic INGDDEFFXXX \
       --debtor-name "Joe Foo" \
       --subject "Hello World" \
       --amount 10.50

Now the list of transactions has grown by several entries:

.. code-block:: console

   $ libeufin-cli sandbox bankaccount transactions jrluser
   {
     "payments" : [ {
       "accountLabel" : "jrluser",
       "creditorIban" : "DE724881",
       "creditorBic" : "SANDBOXX",
       "creditorName" : "Unknown",
       "debtorIban" : "DE895351",
       "debtorBic" : "SANDBOXX",
       "debtorName" : "The Bank",
       "amount" : "100",
       "currency" : "EUR",
       "subject" : "Sign-up bonus",
       "date" : "Tue, 22 Feb 2022 00:04:15 GMT",
       "creditDebitIndicator" : "credit",
       "accountServicerReference" : "2NG75I0O",
       "paymentInformationId" : null
     }, {
       "accountLabel" : "jrluser",
       "creditorIban" : "DE724881",
       "creditorBic" : "SANDBOXX",
       "creditorName" : "Creditor Name",
       "debtorIban" : "DE64500105178797276788",
       "debtorBic" : "DEUTDEBB101",
       "debtorName" : "Max Mustermann",
       "amount" : "22",
       "currency" : "EUR",
       "subject" : "sample transaction GSF7S5LC",
       "date" : "Tue, 22 Feb 2022 01:26:18 GMT",
       "creditDebitIndicator" : "credit",
       "accountServicerReference" : "GSF7S5LC",
       "paymentInformationId" : null
     }, {
       "accountLabel" : "jrluser",
       "creditorIban" : "DE64500105178797276788",
       "creditorBic" : "DEUTDEBB101",
       "creditorName" : "Max Mustermann",
       "debtorIban" : "DE724881",
       "debtorBic" : "SANDBOXX",
       "debtorName" : "Debitor Name",
       "amount" : "10",
       "currency" : "EUR",
       "subject" : "sample transaction 1WUP303Q",
       "date" : "Tue, 22 Feb 2022 01:26:18 GMT",
       "creditDebitIndicator" : "debit",
       "accountServicerReference" : "1WUP303Q",
       "paymentInformationId" : null
     }, {
       "accountLabel" : "jrluser",
       "creditorIban" : "DE724881",
       "creditorBic" : "SANDBOXX",
       "creditorName" : "Creditor Name",
       "debtorIban" : "DE06500105174526623718",
       "debtorBic" : "INGDDEFFXXX",
       "debtorName" : "Joe Foo",
       "amount" : "10.50",
       "currency" : "EUR",
       "subject" : "Hello World",
       "date" : "Tue, 22 Feb 2022 01:26:41 GMT",
       "creditDebitIndicator" : "credit",
       "accountServicerReference" : "sandbox-ALQP8TXKJWRVKMAH",
       "paymentInformationId" : null
     } ]
   }

.. note::

   The sandbox is intended as a testing tool and thus not stable.

Disable registrations (experimental)
------------------------------------

Demobanks can disable/enable registrations for new users.  The
responsible option is ``--with-registrations``/``--without-registrations``.
Note: in order to `change` this option, the ``--override`` flag is
expected.  See ``libeufin-sandbox config --help``.

For more information on the available commands, use the built-in ``--help`` flag.
The full functionality of the sandbox is available via
the :ref:`Sandbox API <sandbox-api>`.


Connect Nexus with an EBICS account
===================================

Nexus relies on a database, which you must specify using a JDBC
connection URI with the ``LIBEUFIN_NEXUS_DB_CONNECTION`` environment
variable, before invoking any commands.
(If this variable is not set, ``libeufin-nexus`` complains and exits.)

Only *SQLite* (e.g. ``jdbc:sqlite:/tmp/libeufintestdb``) and *PostgreSQL (via TCP)*
(e.g. ``jdbc:postgresql://localhost:$port/libeufintestdb?user=$username&password=$password``)
are supported right now.

Use the following command to run the Nexus service:

.. code-block:: console

  $ export LIBEUFIN_NEXUS_DB_CONNECTION=jdbc:postgresql://localhost:5433/libeufindb?user=foo&password=secret
  $ libeufin-nexus serve --port 5017

This assumes that the PostgreSQL service with a database
called ``libeufindb`` listens on port 5433
for requests from the Nexus service.
The Nexus service itself listens on port 5017.
Note that you must have the ``LIBEUFIN_NEXUS_DB_CONNECTION``
environment variable set for most uses of the libeufin-nexus
command.

At this point a superuser account needs to be created:

.. code-block:: console

  $ libeufin-nexus superuser foo --password secret

If you omit ``--password secret``, you will interactively be asked for a password.
For simplicity, a superuser can as well act as a normal user, but an API
to create less privileged users is offered.

.. note::

  User and permissions management in LibEuFin is still under development.
  In particular, permissions for non-superusers are very limited at the moment.

The command line interface needs the following three values
to be defined in the environment: ``LIBEUFIN_NEXUS_URL``, ``LIBEUFIN_NEXUS_USERNAME``,
and ``LIBEUFIN_NEXUS_PASSWORD``.  In this example, ``LIBEUFIN_NEXUS_USERNAME`` should be
set to ``foo``, and ``LIBEUFIN_NEXUS_PASSWORD`` to the value given for its password
in the previous step (with the ``libeufin-nexus superuser`` command).  The
``LIBEUFIN_NEXUS_URL`` could be given as ``http://localhost:5017``.

Next, we create a EBICS *bank connection* that Nexus can use to communicate with the bank.

.. note::

   For the sandbox setup in this guide, the ``EBICS_BASE_URL``
   should be ``http://localhost:5016/ebicsweb``.
   This is the value of environment variable
   ``LIBEUFIN_SANDBOX_URL`` suffixed with ``/ebicsweb``,
   since the sandbox will be providing EBICS services.

   Similarly, ``EBICS_HOST_ID`` should be ``testhost``,
   and ``EBICS_PARTNER_ID`` should be ``partner01``.
   For ``EBICS_USER_ID`` we will use ``user02`` (for account ``jrluser``),
   and for ``CONNECTION_NAME``, we will use ``conn01``.

.. code-block:: console

  $ libeufin-cli \
      connections \
        new-ebics-connection \
          --ebics-url $EBICS_BASE_URL \
          --host-id $EBICS_HOST_ID \
          --partner-id $EBICS_PARTNER_ID \
          --ebics-user-id $EBICS_USER_ID \
          $CONNECTION_NAME

If this step executes correctly
(use ``libeufin-cli connections list-connections``
and ``libeufin-cli connections show-connection`` to check),
Nexus will have created all the cryptographic
material that is needed on the client side; in this EBICS example, it created
the signature and identification keys.  It is therefore advisable to *make
a backup copy* of such keys.

.. code-block:: console

  $ libeufin-cli \
      connections \
        export-backup \
          --passphrase $SECRET \
          --output-file $BACKUP_FILE \
          $CONNECTION_NAME

At this point, Nexus needs to both communicate its keys to the bank, and
download the bank's keys.  This synchronization happens through the INI, HIA, and
finally, HPB message types.

After the electronic synchronization, the subscriber must confirm their keys
by sending a physical mail to the bank.  The following command helps generating
such letter:

.. code-block:: console

  $ libeufin-cli connections get-key-letter $CONNECTION_NAME out.pdf

.. note::

   When using the LibEuFin sandbox, subscribers are automatically
   activated after keys are received electronically.

.. code-block:: console

  $ libeufin-cli \
      connections \
        connect \
          $CONNECTION_NAME

Once the connection is synchronized, Nexus needs to import locally the data
corresponding to the bank accounts offered by the bank connection just made.
The command below downloads the list of the bank accounts offered by ``$CONNECTION_NAME``.

.. code-block:: console

  $ libeufin-cli \
      connections \
        download-bank-accounts \
          $CONNECTION_NAME

It is now possible to list the accounts offered by the connection.

.. code-block:: console

  $ libeufin-cli \
      connections \
        list-offered-bank-accounts \
          $CONNECTION_NAME

.. note::

   The ``nexusBankAccountId`` field should at this step be ``null``,
   as we have not yet imported the bank account and thus the account
   does not yet have a local name.

Nexus now needs an explicit import of the accounts it should manage.  This
step is needed to let the user pick a custom name for such accounts.

.. code-block:: console

  $ libeufin-cli \
      connections \
        import-bank-account \
          --offered-account-id testacct01 \
          --nexus-bank-account-id $LOCAL_ACCOUNT_NAME \
          $CONNECTION_NAME

Once a Nexus user imported a bank account (``$LOCAL_ACCOUNT_NAME``)
under a certain connection (``$CONNECTION_NAME``), it is possible
to accomplish the usual operations for any bank account: asking for the
list of transactions, and making a payment.

Request history of transactions
===============================

The LibEuFin Nexus keeps a local copy of the bank account's transaction
history.  Before querying transactions locally, it is necessary
to request transactions for the bank account via the bank connection.

This command asks Nexus to download the latest transaction reports/statements
through the bank connection:

.. code-block:: console

  $ libeufin-cli accounts fetch-transactions $LOCAL_ACCOUNT_NAME

.. note::

   By default, the latest available transactions are fetched.  It is also
   possible to specify a custom date range (or even all available transactions)
   and the type of transactions to fetch (inter-day statements or intra-day
   reports).

Once Nexus has stored all the information in the database, the
client can ask to actually see the transactions:

.. code-block:: console

  $ libeufin-cli accounts transactions $LOCAL_ACCOUNT_NAME

Make a payment
==============

Payments pass through two phases: preparation and submission.  The preparation
phase assigns the payment initiation a unique ID, which prevents accidental
double submissions of payments in case of network failures or other
disruptions.


The following command prepares a payment:

.. code-block:: console

  $ libeufin-cli accounts prepare-payment \
          --creditor-iban=$IBAN_TO_SEND_MONEY_TO \
          --creditor-bic=$BIC_TO_SEND_MONEY_TO \
          --creditor-name=$CREDITOR_NAME \
          --payment-amount=$AMOUNT \
          --payment-subject=$SUBJECT \
          $LOCAL_ACCOUNT_NAME

Note: the ``$AMOUNT`` value needs the format ``CURRENCY:X.Y``; for example
``EUR:10``, or ``EUR:1.01``.

The previous command should return a value (``$UUID``) that uniquely
identifies the prepared payment in the Nexus system.  That is needed
in the next step, to **send the payment instructions to the bank**:

.. code-block:: console

  $ libeufin-cli accounts submit-payment \
        --payment-uuid $UUID \
        $LOCAL_ACCOUNT_NAME

Automatic scheduling
====================

With an EBICS bank connection, the LibEuFin Nexus needs to regularly query for
new transactions and (re-)submit prepared payments.

It is possible to schedule these tasks via an external task scheduler such as
cron(8).  However, the Nexus also has an internal task scheduling mechanism for
accounts.


The following three commands create a schedule for submitting payments hourly,
fetching transactions (intra-day reports) every 5 minutes, and (inter-day statements)
once at 11pm every day :

.. code-block:: console

   $ libeufin-cli accounts task-schedule myacct \
       --task-type="submit" \
       --task-name='submit-payments-hourly' \
       --task-cronspec='0 0 *'

   $ libeufin-cli accounts task-schedule myacct \
       --task-type="fetch" \
       --task-name='fetch-5min' \
       --task-cronspec='0 */5 *' \
       --task-param-level=report \
       --task-param-range-type=latest

   $ libeufin-cli accounts task-schedule myacct \
       --task-type="fetch" \
       --task-name='fetch-daily' \
       --task-cronspec='0 0 23' \
       --task-param-level=statement \
       --task-param-range-type=latest

The cronspec has the following format, which is slightly non-standard due to
the ``SECONDS`` field

.. code-block:: none

  SECONDS MINUTES HOURS DAY-OF-MONTH[optional] MONTH[optional] DAY-OF-WEEK[optional]


Restore the backup
==================

The following command restores all the details associated with
one bank connection subscription.  For EBICS, this means that the
INI and HIA secret keys will be restored for the requesting user.

.. code-block:: console

  $ libeufin-cli connections \
      restore-backup \
      --passphrase=$SECRET \
      --backup-file=$BACKUP_FILE \
      $CONNECTION_NAME

..
  FIXME:
  On a bad password given, Nexus responds
  "bad backup given" instead of "authentication failed".


Creating a Taler facade
=======================

Facades are additional abstraction layers that can serve
specific purposes.  For example, one application might need
a filtered version of the transaction history, or it might
want to refuse payments that do not conform to certain rules.

At this moment, only the *Taler facade type* is implemented
in the Nexus, and the command below instantiates one under a
existing bank account / connection pair.  You can freely
assign an identifier for the ``$FACADE_NAME`` below:

.. code-block:: console

  $ libeufin-cli facades new-taler-wire-gateway-facade \
      --currency EUR \
      --facade-name $FACADE_NAME \
      $CONNECTION_NAME \
      $LOCAL_ACCOUNT_NAME

At this point, the additional *taler-wire-gateway* (FIXME: link
here to API here) API becomes offered by the Nexus.  The purpose
is to let a Taler exchange rely on Nexus to manage its bank account.

The base URL of the facade that can be used by the Taler exchange
as the Taler Wire Gateway base URL located when listing the facades:

.. code-block:: console

  $ libeufin-cli facades list

Creating a Anastasis facade
===========================

The following command creates a Anastasis facade.  At this point, *only*
the superuser is able to create facades; please set the environment variables
``LIBEUFIN_NEXUS_USERNAME`` and ``LIBEUFIN_NEXUS_PASSWORD`` accordingly.

.. code-block:: console

  $ libeufin-cli facades new-anastasis-facade \
      --currency EUR \
      --facade-name $FACADE_NAME \
      $CONNECTION_NAME \
      $LOCAL_ACCOUNT_NAME

If the previous command succeeded, it is possible to see the
facade's base URL with:

.. code-block:: console

  $ libeufin-cli facades list

At this point, to allow a non superuser to use the facade, a history
permission needs to be set:

.. code-block:: console

  $ libeufin-cli permissions grant \
     user $USERNAME \
     facade $FACADENAME \
     facade.anastasis.history

.. note::

   There is no need to set/unset a transfer permission on the facade
   since this one does not offer any endpoint to issue wire transfers.

Managing Permissions and Users
==============================

This guide has so far assumed that a superuser is accessing the LibEuFin Nexus.
However, it is advisable that the Nexus is accessed with users that only have a
minimal set of permissions.

The Nexus currently only has support for giving non-superusers access to Taler
wire gateway facades.

To create a new user, use the ``users`` subcommand of the CLI:

.. code-block:: console

  $ libeufin-cli users list
  # [ ... shows available users ... ]

  $ libeufin-cli users create $USERNAME
  # [ ... will prompt for password ... ]

Permissions are managed with the ``permissions`` subcommand.
The following commands grant permissions to view the transaction history
and create payment initiations with a Taler wire gateway facade:


.. code-block:: console

  $ libeufin-cli permissions grant \
     user $USERNAME \
     facade $FACADENAME \
     facade.talerWireGateway.history

  $ libeufin-cli permissions grant \
     user $USERNAME \
     facade $FACADENAME \
     facade.talerWireGateway.transfer

The list of all granted permissions can be reviewed:

.. code-block:: console

  $ libeufin-cli permissions list