From b8d2d2fa2ed2a771880f451725176f256583cb22 Mon Sep 17 00:00:00 2001
From: Christian Grothoff <christian@grothoff.org>
Date: Fri, 12 Apr 2024 10:33:55 +0200
Subject: -update manpages

---
 man/taler-exchange-aggregator.1 | 38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

(limited to 'man/taler-exchange-aggregator.1')

diff --git a/man/taler-exchange-aggregator.1 b/man/taler-exchange-aggregator.1
index f9913356..c9a226e2 100644
--- a/man/taler-exchange-aggregator.1
+++ b/man/taler-exchange-aggregator.1
@@ -27,20 +27,20 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
 .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
 ..
-.TH "TALER-EXCHANGE-AGGREGATOR" "1" "Mar 07, 2024" "0.9" "GNU Taler"
+.TH "TALER-EXCHANGE-AGGREGATOR" "1" "Apr 12, 2024" "0.9" "GNU Taler"
 .SH NAME
 taler-exchange-aggregator \- aggregate deposits into wire transfers
 .SH SYNOPSIS
 .sp
 \fBtaler\-exchange\-aggregator\fP
-[\fB\-c\fP\ \fIFILENAME\fP\ |\ \fB\-\-config=\fP‌\fIFILENAME\fP]
-[\fB\-h\fP\ |\ \fB\-\-help\fP]
-[\fB\-L\fP\ \fILOGLEVEL\fP\ |\ \fB\-\-loglevel=\fP‌\fILOGLEVEL\fP]
-[\fB\-l\fP\ \fIFILENAME\fP\ |\ \fB\-\-logfile=\fP‌\fIFILENAME\fP]
-[\fB\-T\fP\ \fIUSEC\fP\ |\ \fB\-\-timetravel\fP\fIUSEC\fP]
-[\fB\-t\fP\ |\ \fB\-\-test\fP]
-[\fB\-v\fP\ |\ \fB\-\-version\fP]
-[\fB\-y**_|_\fP\-\-kyc\-off**]
+[\fB\-c\fP\ \fIFILENAME\fP\ |\ \fB–config=\fP‌\fIFILENAME\fP]
+[\fB\-h\fP\ |\ \fB–help\fP]
+[\fB\-L\fP\ \fILOGLEVEL\fP\ |\ \fB–loglevel=\fP‌\fILOGLEVEL\fP]
+[\fB\-l\fP\ \fIFILENAME\fP\ |\ \fB–logfile=\fP‌\fIFILENAME\fP]
+[\fB\-T\fP\ \fIUSEC\fP\ |\ \fB–timetravel\fP\fIUSEC\fP]
+[\fB\-t\fP\ |\ \fB–test\fP]
+[\fB\-v\fP\ |\ \fB–version\fP]
+[\fB\-y**_|_\fP–kyc\-off**]
 .SH DESCRIPTION
 .sp
 \fBtaler\-exchange\-aggregator\fP is a command\-line tool to run aggregate deposits
@@ -49,35 +49,35 @@ done by \fBtaler\-exchange\-transfer\fP\&.
 .sp
 The AGGREGATOR_SHARD_SIZE option can be used to allow multiple aggregator processes to run in parallel and share the load. This is only recommended if a single aggregator is insufficient for the workload.
 .sp
-The aggregator uses a special table to lock shards it is working on. If an aggregator process dies (say due to a power failure), these shard locks may prevent the aggregator from resuming normally. In this case, you must run \(dqtaler\-exchange\-dbinit \-s\(dq to release the shard locks before restarting the aggregator.
+The aggregator uses a special table to lock shards it is working on. If an aggregator process dies (say due to a power failure), these shard locks may prevent the aggregator from resuming normally. In this case, you must run “taler\-exchange\-dbinit \-s” to release the shard locks before restarting the aggregator.
 .INDENT 0.0
 .TP
-\fB\-c\fP \fIFILENAME\fP | \fB\-\-config=\fP‌\fIFILENAME\fP
+\fB\-c\fP \fIFILENAME\fP | \fB–config=\fP‌\fIFILENAME\fP
 Use the configuration and other resources for the exchange to operate
 from \fIFILENAME\fP\&.
 .TP
-\fB\-h\fP | \fB\-\-help\fP
+\fB\-h\fP | \fB–help\fP
 Print short help on options.
 .TP
-\fB\-L\fP \fILOGLEVEL\fP | \fB\-\-loglevel=\fP‌\fILOGLEVEL\fP
+\fB\-L\fP \fILOGLEVEL\fP | \fB–loglevel=\fP‌\fILOGLEVEL\fP
 Specifies the log level to use. Accepted values are: \fBDEBUG\fP, \fBINFO\fP,
 \fBWARNING\fP, \fBERROR\fP\&.
 .TP
-\fB\-l\fP \fIFILENAME\fP | \fB\-\-logfile=\fP‌\fIFILENAME\fP
+\fB\-l\fP \fIFILENAME\fP | \fB–logfile=\fP‌\fIFILENAME\fP
 Send logging output to \fIFILENAME\fP\&.
 .TP
-\fB\-T\fP \fIUSEC\fP | \fB\-\-timetravel=\fP\fIUSEC\fP
+\fB\-T\fP \fIUSEC\fP | \fB–timetravel=\fP\fIUSEC\fP
 Modify the system time by \fIUSEC\fP microseconds.
 \fIUSEC\fP may be prefixed with \fB+\fP or \fB\-\fP (e.g. \fB\-T +300\fP).
 This option is intended for debugging/testing only.
 .TP
-\fB\-t\fP | \fB\-\-test\fP
+\fB\-t\fP | \fB–test\fP
 Run in test mode and exit when idle.
 .TP
-\fB\-v\fP | \fB\-\-version\fP
+\fB\-v\fP | \fB–version\fP
 Print version information.
 .TP
-\fB\-y\fP | \fB\-\-kyc\-off\fP
+\fB\-y\fP | \fB–kyc\-off\fP
 Run without KYC checks. Talk with your regulator before using this option.
 .UNINDENT
 .SH SEE ALSO
@@ -91,6 +91,6 @@ mail to <\fI\%taler@gnu.org\fP>.
 .SH AUTHOR
 GNU Taler contributors
 .SH COPYRIGHT
-2014-2022 Taler Systems SA (GPLv3+ or GFDL 1.3+)
+2014-2024 Taler Systems SA (GPLv3+ or GFDL 1.3+)
 .\" Generated by docutils manpage writer.
 .
-- 
cgit v1.2.3