Add manpages: sync-dbinit(1), sync-httpd(1)

* manpages/sync-dbinit.1.rst: New.
* manpages/sync-httpd.1.rst: New.
* conf.py (man_pages): Add entries for new manpages.

This partially addresses <https://bugs.gnunet.org/view.php?id=7019>.

3 files changed, 147 insertions, 0 deletions

diff --git a/conf.py b/conf.py
index f7aa52e1..5726eea5 100644
--- a/conf.py
+++ b/conf.py
@@ -275,6 +275,10 @@ latex_appendices = ["fdl-1.3"]
 # One entry per manual page. List of tuples
 # (source start file, name, description, authors, manual section).
 man_pages = [
+    ("manpages/sync-dbinit.1", "sync-dbinit",
+     "initialize the Sync database", "GNU Taler contributors", 1),
+    ("manpages/sync-httpd.1", "sync-httpd",
+     "provide the Sync HTTP interface", "GNU Taler contributors", 1),
     ("manpages/taler-auditor-exchange.1", "taler-auditor-exchange",
      "add or remove exchange from auditor’s list", "GNU Taler contributors",
      1),
diff --git a/manpages/sync-dbinit.1.rst b/manpages/sync-dbinit.1.rst
new file mode 100644
index 00000000..bcf061d6
--- /dev/null
+++ b/manpages/sync-dbinit.1.rst
@@ -0,0 +1,65 @@
+sync-dbinit(1)
+##############
+
+.. only:: html
+
+   Name
+   ====
+
+   **sync-dbinit** - initialize the Sync database
+
+
+Synopsis
+========
+
+**sync-dbinit**
+[**-c** *FILENAME* | **--config=**\ ‌\ *FILENAME*]
+[**-g** | **--garbagecollect**]
+[**-h** | **--help**]
+[**-L** *LOGLEVEL* | **--log=**\ \ *LOGLEVEL*]
+[**-l** *FILENAME* | **--logfile=**\ \ *FILENAME*]
+[**-r** | **--reset**]
+[**-v** | **--version**]
+
+
+Description
+===========
+
+**sync-dbinit** is a command-line tool to initialize the Sync database.
+
+Its options are as follows:
+
+**-c** *FILENAME* \| **--config=**\ ‌\ *FILENAME*
+   Use the configuration and other resources for the Sync commands
+   to operate from *FILENAME*.
+
+**-g** \| **--garbagecollect**
+   Remove state data from database.
+
+**-h** \| **--help**
+   Print short help on options.
+
+**-L** *LOGLEVEL* \| **--log=**\ \ *LOGLEVEL*
+   Configure logging to use *LOGLEVEL*.
+
+**-l** *FILENAME* \| **--logfile=**\ \ *FILENAME*
+   Configure logging to write logs to *FILENAME*.
+
+**-r** \| **--reset**
+   Reset database.  (**DANGEROUS**: All existing data is lost!)
+
+**-v** \| **–version**
+   Print version information.
+
+
+See Also
+========
+
+sync-httpd(1).
+
+
+Bugs
+====
+
+Report bugs by using https://bugs.taler.net or by sending electronic
+mail to <taler@gnu.org>.
diff --git a/manpages/sync-httpd.1.rst b/manpages/sync-httpd.1.rst
new file mode 100644
index 00000000..29147a32
--- /dev/null
+++ b/manpages/sync-httpd.1.rst
@@ -0,0 +1,78 @@
+sync-httpd(1)
+#############
+
+.. only:: html
+
+   Name
+   ====
+
+   **sync-httpd** - provide the Sync HTTP interface
+
+
+Synopsis
+========
+
+**sync-httpd**
+[**-A** *USERNAME:PASSWORD* | **--auth=**\ \ *USERNAME:PASSWORD*]
+[**-C** | **--connection-close**]
+[**-c** *FILENAME* | **--config=**\ ‌\ *FILENAME*]
+[**-h** | **--help**]
+[**-k** *KEYFILE* | **--key=**\ \ *KEYFILE*]
+[**-L** *LOGLEVEL* | **--log=**\ \ *LOGLEVEL*]
+[**-l** *FILENAME* | **--logfile=**\ \ *FILENAME*]
+[**-p** *KEYFILEPASSPHRASE* | **--pass=**\ \ *KEYFILEPASSPHRASE*]
+[**-t** *CERTTYPE* | **--type=**\ \ *CERTTYPE*]
+[**-v** | **--version**]
+
+
+Description
+===========
+
+**sync-httpd** is a command-line tool to provide the Sync HTTP interface.
+
+Its options are as follows:
+
+**-A** *USERNAME:PASSWORD* \| **--auth=**\ \ *USERNAME:PASSWORD*
+   Use the given *USERNAME* and *PASSWORD* for client authentication.
+
+**-C** \| **--connection-close**
+   Force HTTP connections to be closed after each request.
+
+**-c** *FILENAME* \| **--config=**\ ‌\ *FILENAME*
+   Use the configuration and other resources for the Sync commands
+   to operate from *FILENAME*.
+
+**-h** \| **--help**
+   Print short help on options.
+
+**-k** *KEYFILE* \| **--key=**\ \ *KEYFILE*
+   Consult *KEYFILE* for the private TLS key for TLS client authentication.
+
+**-L** *LOGLEVEL* \| **--log=**\ \ *LOGLEVEL*
+   Configure logging to use *LOGLEVEL*.
+
+**-l** *FILENAME* \| **--logfile=**\ \ *FILENAME*
+   Configure logging to write logs to *FILENAME*.
+
+**-p** *KEYFILEPASSPHRASE* \| **--pass=**\ \ *KEYFILEPASSPHRASE*
+   Use *KEYFILEPASSPHRASE* to decrypt the TLS client private key file.
+
+**-t** *CERTTYPE* \| **--type=**\ \ *CERTTYPE*
+   Use *CERTTYPE* as the type of the TLS client certificate.
+   If unspecified, defaults to PEM.
+
+**-v** \| **–version**
+   Print version information.
+
+
+See Also
+========
+
+sync-dbinit(1)
+
+
+Bugs
+====
+
+Report bugs by using https://bugs.taler.net or by sending electronic
+mail to <taler@gnu.org>.