diff options
Diffstat (limited to 'doc/texinfo.tex')
| -rw-r--r-- | doc/texinfo.tex | 418 |
1 files changed, 129 insertions, 289 deletions
diff --git a/doc/texinfo.tex b/doc/texinfo.tex index 3c7051d..e48383d 100644 --- a/doc/texinfo.tex +++ b/doc/texinfo.tex @@ -3,9 +3,9 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2020-10-24.12} +\def\texinfoversion{2021-04-25.21} % -% Copyright 1985, 1986, 1988, 1990-2020 Free Software Foundation, Inc. +% Copyright 1985, 1986, 1988, 1990-2021 Free Software Foundation, Inc. % % This texinfo.tex file is free software: you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -572,9 +572,8 @@ \fi } -% @end foo executes the definition of \Efoo. -% But first, it executes a specialized version of \checkenv -% + +% @end foo calls \checkenv and executes the definition of \Efoo. \parseargdef\end{% \if 1\csname iscond.#1\endcsname \else @@ -1003,6 +1002,14 @@ where each line of input produces a line of output.} \global\everypar = {}% } +% leave vertical mode without cancelling any first paragraph indent +\gdef\imageindent{% + \toks0=\everypar + \everypar={}% + \ptexnoindent + \global\everypar=\toks0 +} + % @refill is a no-op. \let\refill=\relax @@ -1863,19 +1870,23 @@ output) for that.)} \closein 1 \endgroup % - \def\xetexpdfext{pdf}% - \ifx\xeteximgext\xetexpdfext - \XeTeXpdffile "#1".\xeteximgext "" - \else - \def\xetexpdfext{PDF}% + % Putting an \hbox around the image can prevent an over-long line + % after the image. + \hbox\bgroup + \def\xetexpdfext{pdf}% \ifx\xeteximgext\xetexpdfext \XeTeXpdffile "#1".\xeteximgext "" \else - \XeTeXpicfile "#1".\xeteximgext "" + \def\xetexpdfext{PDF}% + \ifx\xeteximgext\xetexpdfext + \XeTeXpdffile "#1".\xeteximgext "" + \else + \XeTeXpicfile "#1".\xeteximgext "" + \fi \fi - \fi - \ifdim \wd0 >0pt width \xeteximagewidth \fi - \ifdim \wd2 >0pt height \xeteximageheight \fi \relax + \ifdim \wd0 >0pt width \xeteximagewidth \fi + \ifdim \wd2 >0pt height \xeteximageheight \fi \relax + \egroup } \fi @@ -2673,8 +2684,6 @@ end \definetextfontsizexi -\message{markup,} - % Check if we are currently using a typewriter font. Since all the % Computer Modern typewriter fonts have zero interword stretch (and % shrink), and it is reasonable to expect all typewriter fonts to have @@ -2682,68 +2691,14 @@ end % \def\ifmonospace{\ifdim\fontdimen3\font=0pt } -% Markup style infrastructure. \defmarkupstylesetup\INITMACRO will -% define and register \INITMACRO to be called on markup style changes. -% \INITMACRO can check \currentmarkupstyle for the innermost -% style. - -\let\currentmarkupstyle\empty - -\def\setupmarkupstyle#1{% - \def\currentmarkupstyle{#1}% - \markupstylesetup -} - -\let\markupstylesetup\empty - -\def\defmarkupstylesetup#1{% - \expandafter\def\expandafter\markupstylesetup - \expandafter{\markupstylesetup #1}% - \def#1% -} - -% Markup style setup for left and right quotes. -\defmarkupstylesetup\markupsetuplq{% - \expandafter\let\expandafter \temp - \csname markupsetuplq\currentmarkupstyle\endcsname - \ifx\temp\relax \markupsetuplqdefault \else \temp \fi -} - -\defmarkupstylesetup\markupsetuprq{% - \expandafter\let\expandafter \temp - \csname markupsetuprq\currentmarkupstyle\endcsname - \ifx\temp\relax \markupsetuprqdefault \else \temp \fi -} - { \catcode`\'=\active \catcode`\`=\active -\gdef\markupsetuplqdefault{\let`\lq} -\gdef\markupsetuprqdefault{\let'\rq} - -\gdef\markupsetcodequoteleft{\let`\codequoteleft} -\gdef\markupsetcodequoteright{\let'\codequoteright} +\gdef\setcodequotes{\let`\codequoteleft \let'\codequoteright} +\gdef\setregularquotes{\let`\lq \let'\rq} } -\let\markupsetuplqcode \markupsetcodequoteleft -\let\markupsetuprqcode \markupsetcodequoteright -% -\let\markupsetuplqexample \markupsetcodequoteleft -\let\markupsetuprqexample \markupsetcodequoteright -% -\let\markupsetuplqkbd \markupsetcodequoteleft -\let\markupsetuprqkbd \markupsetcodequoteright -% -\let\markupsetuplqsamp \markupsetcodequoteleft -\let\markupsetuprqsamp \markupsetcodequoteright -% -\let\markupsetuplqverb \markupsetcodequoteleft -\let\markupsetuprqverb \markupsetcodequoteright -% -\let\markupsetuplqverbatim \markupsetcodequoteleft -\let\markupsetuprqverbatim \markupsetcodequoteright - % Allow an option to not use regular directed right quote/apostrophe % (char 0x27), but instead the undirected quote from cmtt (char 0x0d). % The undirected quote is ugly, so don't make it the default, but it @@ -2906,7 +2861,7 @@ end } % @samp. -\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}} +\def\samp#1{{\setcodequotes\lq\tclose{#1}\rq\null}} % @indicateurl is \samp, that is, with quotes. \let\indicateurl=\samp @@ -2949,8 +2904,7 @@ end \global\let'=\rq \global\let`=\lq % default definitions % \global\def\code{\begingroup - \setupmarkupstyle{code}% - % The following should really be moved into \setupmarkupstyle handlers. + \setcodequotes \catcode\dashChar=\active \catcode\underChar=\active \ifallowcodebreaks \let-\codedash @@ -3104,7 +3058,7 @@ end \urefcatcodes % \global\def\urefcode{\begingroup - \setupmarkupstyle{code}% + \setcodequotes \urefcatcodes \let&\urefcodeamp \let.\urefcodedot @@ -3225,8 +3179,8 @@ end \def\kbdsub#1#2#3\par{% \def\one{#1}\def\three{#3}\def\threex{??}% \ifx\one\xkey\ifx\threex\three \key{#2}% - \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi - \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi + \else{\tclose{\kbdfont\setcodequotes\look}}\fi + \else{\tclose{\kbdfont\setcodequotes\look}}\fi } % definition of @key that produces a lozenge. Doesn't adjust to text size. @@ -3243,7 +3197,7 @@ end % monospace, don't change it; that way, we respect @kbdinputstyle. But % if it isn't monospace, then use \tt. % -\def\key#1{{\setupmarkupstyle{key}% +\def\key#1{{\setregularquotes \nohyphenation \ifmonospace\else\tt\fi #1}\null} @@ -3373,16 +3327,20 @@ end {\obeylines \globaldefs=1 \envdef\displaymath{% -\tex +\tex% \def\thisenv{\displaymath}% +\begingroup\let\end\displaymathend% $$% } -\def\Edisplaymath{$$ +\def\displaymathend{$$\endgroup\end}% + +\def\Edisplaymath{% \def\thisenv{\tex}% \end tex }} + % @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}. % Ignore unless FMTNAME == tex; then it is like @iftex and @tex, % except specified as a normal braced arg, so no newlines to worry about. @@ -4343,82 +4301,8 @@ $$% \doitemize{#1.}\flushcr } -% @alphaenumerate and @capsenumerate are abbreviations for giving an arg -% to @enumerate. -% -\def\alphaenumerate{\enumerate{a}} -\def\capsenumerate{\enumerate{A}} -\def\Ealphaenumerate{\Eenumerate} -\def\Ecapsenumerate{\Eenumerate} - % @multitable macros -% Amy Hendrickson, 8/18/94, 3/6/96 -% -% @multitable ... @end multitable will make as many columns as desired. -% Contents of each column will wrap at width given in preamble. Width -% can be specified either with sample text given in a template line, -% or in percent of \hsize, the current width of text on page. - -% Table can continue over pages but will only break between lines. - -% To make preamble: -% -% Either define widths of columns in terms of percent of \hsize: -% @multitable @columnfractions .25 .3 .45 -% @item ... -% -% Numbers following @columnfractions are the percent of the total -% current hsize to be used for each column. You may use as many -% columns as desired. - - -% Or use a template: -% @multitable {Column 1 template} {Column 2 template} {Column 3 template} -% @item ... -% using the widest term desired in each column. - -% Each new table line starts with @item, each subsequent new column -% starts with @tab. Empty columns may be produced by supplying @tab's -% with nothing between them for as many times as empty columns are needed, -% ie, @tab@tab@tab will produce two empty columns. - -% @item, @tab do not need to be on their own lines, but it will not hurt -% if they are. - -% Sample multitable: - -% @multitable {Column 1 template} {Column 2 template} {Column 3 template} -% @item first col stuff @tab second col stuff @tab third col -% @item -% first col stuff -% @tab -% second col stuff -% @tab -% third col -% @item first col stuff @tab second col stuff -% @tab Many paragraphs of text may be used in any column. -% -% They will wrap at the width determined by the template. -% @item@tab@tab This will be in third column. -% @end multitable - -% Default dimensions may be reset by user. -% @multitableparskip is vertical space between paragraphs in table. -% @multitableparindent is paragraph indent in table. -% @multitablecolmargin is horizontal space to be left between columns. -% @multitablelinespace is space to leave between table items, baseline -% to baseline. -% 0pt means it depends on current normal line spacing. -% -\newskip\multitableparskip -\newskip\multitableparindent -\newdimen\multitablecolspace -\newskip\multitablelinespace -\multitableparskip=0pt -\multitableparindent=6pt -\multitablecolspace=12pt -\multitablelinespace=0pt % Macros used to set up halign preamble: % @@ -4466,8 +4350,6 @@ $$% \go } -% multitable-only commands. -% % @headitem starts a heading row, which we typeset in bold. Assignments % have to be global since we are inside the implicit group of an % alignment entry. \everycr below resets \everytab so we don't have to @@ -4484,14 +4366,8 @@ $$% % default for tables with no headings. \let\headitemcrhook=\relax % -% A \tab used to include \hskip1sp. But then the space in a template -% line is not enough. That is bad. So let's go back to just `&' until -% we again encounter the problem the 1sp was intended to solve. -% --karl, nathan@acm.org, 20apr99. \def\tab{\checkenv\multitable &\the\everytab}% -% @multitable ... @end multitable definitions: -% \newtoks\everytab % insert after every tab. % \envdef\multitable{% @@ -4506,9 +4382,8 @@ $$% % \tolerance=9500 \hbadness=9500 - \setmultitablespacing - \parskip=\multitableparskip - \parindent=\multitableparindent + \parskip=0pt + \parindent=6pt \overfullrule=0pt \global\colcount=0 % @@ -4538,47 +4413,24 @@ $$% % continue for many paragraphs if desired. \halign\bgroup &% \global\advance\colcount by 1 - \multistrut + \strut \vtop{% - % Use the current \colcount to find the correct column width: + \advance\hsize by -1\leftskip + % Find the correct column width \hsize=\expandafter\csname col\the\colcount\endcsname % - % In order to keep entries from bumping into each other - % we will add a \leftskip of \multitablecolspace to all columns after - % the first one. - % - % If a template has been used, we will add \multitablecolspace - % to the width of each template entry. - % - % If the user has set preamble in terms of percent of \hsize we will - % use that dimension as the width of the column, and the \leftskip - % will keep entries from bumping into each other. Table will start at - % left margin and final column will justify at right margin. - % - % Make sure we don't inherit \rightskip from the outer environment. \rightskip=0pt \ifnum\colcount=1 - % The first column will be indented with the surrounding text. - \advance\hsize by\leftskip + \advance\hsize by\leftskip % Add indent of surrounding text \else - \ifsetpercent \else - % If user has not set preamble in terms of percent of \hsize - % we will advance \hsize by \multitablecolspace. - \advance\hsize by \multitablecolspace - \fi - % In either case we will make \leftskip=\multitablecolspace: - \leftskip=\multitablecolspace + % In order to keep entries from bumping into each other. + \leftskip=12pt + \ifsetpercent \else + % If a template has been used + \advance\hsize by \leftskip + \fi \fi - % Ignoring space at the beginning and end avoids an occasional spurious - % blank line, when TeX decides to break the line at the space before the - % box from the multistrut, so the strut ends up on a line by itself. - % For example: - % @multitable @columnfractions .11 .89 - % @item @code{#} - % @tab Legal holiday which is valid in major parts of the whole country. - % Is automatically provided with highlighting sequences respectively - % marking characters. - \noindent\ignorespaces##\unskip\multistrut + \noindent\ignorespaces##\unskip\strut }\cr } \def\Emultitable{% @@ -4587,31 +4439,6 @@ $$% \global\setpercentfalse } -\def\setmultitablespacing{% - \def\multistrut{\strut}% just use the standard line spacing - % - % Compute \multitablelinespace (if not defined by user) for use in - % \multitableparskip calculation. We used define \multistrut based on - % this, but (ironically) that caused the spacing to be off. - % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100. -\ifdim\multitablelinespace=0pt -\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip -\global\advance\multitablelinespace by-\ht0 -\fi -% Test to see if parskip is larger than space between lines of -% table. If not, do nothing. -% If so, set to same dimension as multitablelinespace. -\ifdim\multitableparskip>\multitablelinespace -\global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller - % than skip between lines in the table. -\fi% -\ifdim\multitableparskip=0pt -\global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller - % than skip between lines in the table. -\fi} - \message{conditionals,} @@ -5225,30 +5052,29 @@ $$% \let\lbracechar\{% \let\rbracechar\}% % + % Non-English letters. + \def\AA{AA}% + \def\AE{AE}% + \def\DH{DZZ}% + \def\L{L}% + \def\OE{OE}% + \def\O{O}% + \def\TH{TH}% + \def\aa{aa}% + \def\ae{ae}% + \def\dh{dzz}% + \def\exclamdown{!}% + \def\l{l}% + \def\oe{oe}% + \def\ordf{a}% + \def\ordm{o}% + \def\o{o}% + \def\questiondown{?}% + \def\ss{ss}% + \def\th{th}% % \let\do\indexnofontsdef % - % Non-English letters. - \do\AA{AA}% - \do\AE{AE}% - \do\DH{DZZ}% - \do\L{L}% - \do\OE{OE}% - \do\O{O}% - \do\TH{TH}% - \do\aa{aa}% - \do\ae{ae}% - \do\dh{dzz}% - \do\exclamdown{!}% - \do\l{l}% - \do\oe{oe}% - \do\ordf{a}% - \do\ordm{o}% - \do\o{o}% - \do\questiondown{?}% - \do\ss{ss}% - \do\th{th}% - % \do\LaTeX{LaTeX}% \do\TeX{TeX}% % @@ -7144,7 +6970,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% % But \@ or @@ will get a plain @ character. \envdef\tex{% - \setupmarkupstyle{tex}% + \setregularquotes \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie @@ -7370,7 +7196,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% % If you want all examples etc. small: @set dispenvsize small. % If you want even small examples the full size: @set dispenvsize nosmall. % This affects the following displayed environments: -% @example, @display, @format, @lisp +% @example, @display, @format, @lisp, @verbatim % \def\smallword{small} \def\nosmallword{nosmall} @@ -7416,9 +7242,9 @@ might help (with 'rm \jobname.?? \jobname.??s')% % \maketwodispenvdef{lisp}{example}{% \nonfillstart - \tt\setupmarkupstyle{example}% + \tt\setcodequotes \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. - \gobble % eat return + \parsearg\gobble } % @display/@smalldisplay: same as @lisp except keep current font. % @@ -7576,7 +7402,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% \def\setupverb{% \tt % easiest (and conventionally used) font for verbatim \def\par{\leavevmode\endgraf}% - \setupmarkupstyle{verb}% + \setcodequotes \tabeightspaces % Respect line breaks, % print special symbols as themselves, and @@ -7617,7 +7443,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% \tt % easiest (and conventionally used) font for verbatim \def\par{\egroup\leavevmode\box\verbbox\endgraf\starttabbox}% \tabexpand - \setupmarkupstyle{verbatim}% + \setcodequotes % Respect line breaks, % print special symbols as themselves, and % make each space count. @@ -8036,7 +7862,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% % leave the code in, but it's strange for @var to lead to typewriter. % Nowadays we recommend @code, since the difference between a ttsl hyphen % and a tt hyphen is pretty tiny. @code also disables ?` !`. - \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}% + \def\var##1{{\setregularquotes\ttslanted{##1}}}% #1% \sl\hyphenchar\font=45 } @@ -8145,11 +7971,18 @@ might help (with 'rm \jobname.?? \jobname.??s')% } \fi +\let\E=\expandafter + % Used at the time of macro expansion. % Argument is macro body with arguments substituted \def\scanmacro#1{% \newlinechar`\^^M - \def\xeatspaces{\eatspaces}% + % expand the expansion of \eatleadingcr twice to maybe remove a leading + % newline (and \else and \fi tokens), then call \eatspaces on the result. + \def\xeatspaces##1{% + \E\E\E\E\E\E\E\eatspaces\E\E\E\E\E\E\E{\eatleadingcr##1% + }}% + \def\xempty##1{}% % % Process the macro body under the current catcode regime. \scantokens{#1@comment}% @@ -8202,6 +8035,11 @@ might help (with 'rm \jobname.?? \jobname.??s')% \unbrace{\gdef\trim@@@ #1 } #2@{#1} } +{\catcode`\^^M=\other% +\gdef\eatleadingcr#1{\if\noexpand#1\noexpand^^M\else\E#1\fi}}% +% Warning: this won't work for a delimited argument +% or for an empty argument + % Trim a single trailing ^^M off a string. {\catcode`\^^M=\other \catcode`\Q=3% \gdef\eatcr #1{\eatcra #1Q^^MQ}% @@ -8368,6 +8206,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% \let\hash\relax % \hash is redefined to `#' later to get it into definitions \let\xeatspaces\relax + \let\xempty\relax \parsemargdefxxx#1,;,% \ifnum\paramno<10\relax\else \paramno0\relax @@ -8379,9 +8218,11 @@ might help (with 'rm \jobname.?? \jobname.??s')% \else \let\next=\parsemargdefxxx \advance\paramno by 1 \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname - {\xeatspaces{\hash\the\paramno}}% + {\xeatspaces{\hash\the\paramno\noexpand\xempty{}}}% \edef\paramlist{\paramlist\hash\the\paramno,}% \fi\next} +% the \xempty{} is to give \eatleadingcr an argument in the case of an +% empty macro argument. % \parsemacbody, \parsermacbody % @@ -8970,7 +8811,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% \else \ifhavexrefs % We (should) know the real title if we have the xref values. - \def\printedrefname{\refx{#1-title}{}}% + \def\printedrefname{\refx{#1-title}}% \else % Otherwise just copy the Info node name. \def\printedrefname{\ignorespaces #1}% @@ -9064,7 +8905,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% % If the user specified the print name (third arg) to the ref, % print it instead of our usual "Figure 1.2". \ifdim\wd\printedrefnamebox = 0pt - \refx{#1-snt}{}% + \refx{#1-snt}% \else \printedrefname \fi @@ -9099,28 +8940,30 @@ might help (with 'rm \jobname.?? \jobname.??s')% \else % Reference within this manual. % - % Only output a following space if the -snt ref is nonempty; for - % @unnumbered and @anchor, it won't be. - \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% + % Only output a following space if the -snt ref is nonempty, as the ref + % will be empty for @unnumbered and @anchor. + \setbox2 = \hbox{\ignorespaces \refx{#1-snt}}% \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi % % output the `[mynode]' via the macro below so it can be overridden. \xrefprintnodename\printedrefname % - % But we always want a comma and a space: - ,\space - % - % output the `page 3'. - \turnoffactive \putwordpage\tie\refx{#1-pg}{}% - % Add a , if xref followed by a space - \if\space\noexpand\tokenafterxref ,% - \else\ifx\ \tokenafterxref ,% @TAB - \else\ifx\*\tokenafterxref ,% @* - \else\ifx\ \tokenafterxref ,% @SPACE - \else\ifx\ - \tokenafterxref ,% @NL - \else\ifx\tie\tokenafterxref ,% @tie - \fi\fi\fi\fi\fi\fi + \expandafter\ifx\csname SETtxiomitxrefpg\endcsname\relax + % But we always want a comma and a space: + ,\space + % + % output the `page 3'. + \turnoffactive \putwordpage\tie\refx{#1-pg}% + % Add a , if xref followed by a space + \if\space\noexpand\tokenafterxref ,% + \else\ifx\ \tokenafterxref ,% @TAB + \else\ifx\*\tokenafterxref ,% @* + \else\ifx\ \tokenafterxref ,% @SPACE + \else\ifx\ + \tokenafterxref ,% @NL + \else\ifx\tie\tokenafterxref ,% @tie + \fi\fi\fi\fi\fi\fi + \fi \fi\fi \fi \endlink @@ -9187,9 +9030,8 @@ might help (with 'rm \jobname.?? \jobname.??s')% \fi\fi\fi } -% \refx{NAME}{SUFFIX} - reference a cross-reference string named NAME. SUFFIX -% is output afterwards if non-empty. -\def\refx#1#2{% +% \refx{NAME} - reference a cross-reference string named NAME. +\def\refx#1{% \requireauxfile {% \indexnofonts @@ -9216,7 +9058,6 @@ might help (with 'rm \jobname.?? \jobname.??s')% % It's defined, so just use it. \thisrefX \fi - #2% Output the suffix in any case. } % This is the macro invoked by entries in the aux file. Define a control @@ -9326,10 +9167,10 @@ might help (with 'rm \jobname.?? \jobname.??s')% \catcode`\[=\other \catcode`\]=\other \catcode`\"=\other - \catcode`\_=\other - \catcode`\|=\other - \catcode`\<=\other - \catcode`\>=\other + \catcode`\_=\active + \catcode`\|=\active + \catcode`\<=\active + \catcode`\>=\active \catcode`\$=\other \catcode`\#=\other \catcode`\&=\other @@ -9550,7 +9391,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% \def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup \catcode`\^^M = 5 % in case we're inside an example \normalturnoffactive % allow _ et al. in names - \def\xprocessmacroarg{\eatspaces}% in case we are being used via a macro + \makevalueexpandable % If the image is by itself, center it. \ifvmode \imagevmodetrue @@ -9576,7 +9417,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% % On the other hand, if we are in the case of @center @image, we don't % want to start a paragraph, which will create a hsize-width box and % eradicate the centering. - \ifx\centersub\centerV\else \noindent \fi + \ifx\centersub\centerV \else \imageindent \fi % % Output the image. \ifpdf @@ -11603,7 +11444,7 @@ directory should work if nowhere else does.} \let> = \activegtr \let~ = \activetilde \let^ = \activehat - \markupsetuplqdefault \markupsetuprqdefault + \setregularquotes \let\b = \strong \let\i = \smartitalic % in principle, all other definitions in \tex have to be undone too. @@ -11662,8 +11503,7 @@ directory should work if nowhere else does.} @let|=@normalverticalbar @let~=@normaltilde @let\=@ttbackslash - @markupsetuplqdefault - @markupsetuprqdefault + @setregularquotes @unsepspaces } } @@ -11756,8 +11596,7 @@ directory should work if nowhere else does.} @c Do this last of all since we use ` in the previous @catcode assignments. @catcode`@'=@active @catcode`@`=@active -@markupsetuplqdefault -@markupsetuprqdefault +@setregularquotes @c Local variables: @c eval: (add-hook 'before-save-hook 'time-stamp) @@ -11770,3 +11609,4 @@ directory should work if nowhere else does.} @c vim:sw=2: @enablebackslashhack + |